I'm getting ready to do a new install & looking for some tips about how to add a home partition. I've done a bunch of installs starting at 6.x but have never used a home partition. I was even wondering if you could put a home partition on a completely separate drive too. Does it mean that if I upgrade at a later time I can use the same home partition for the upgraded version?
View 9 Replies
Trying to clean install 11.2 dual boot with Win xp already installed. How do I create a new home partition, don't want to preserve the existing home partition from a previous attempt. DVD installation and automatic config keeps saving the thing.
View 5 Replies View Relatedrecently i made a backup of my home directory in 10.10 before reinstalling 10.10. again.This time I chose to manually define the partitions (50GB Root, 25GB Swap, 325GB Home)Now i wish to migrate the old home into the newly installed home, which is on a separate partition.I have found the following documentation URL...Still, as a beginner I am not quite sure about the necessary steps to perform.As the new home is located on a separate partition is it possible to simple delete all directories there and copy all directories from old home to new home with rsync?
Do I have to install all the software that corresponds to the old home first followed by migrating home or first migrating home followed by installing the software such as thunderbird, Texlive2010 etc.Guess that migration should take place at a later stage. Otherwise my old profile files from firefox and thunderbird will be overwriten by new ones?
Been digging around and not finding anything that quite works.
Background: I had an existing 10.10 install and 10.04 on another partition. When I installed the 10.04 I told it to use the existing /home partition which is also being used by the 10.10 install. All good, both users have directories with all their data in the same /home partition.
Issue: So, as the 10.04 was 32bit (experimenting but another story) I decided I would replace with 10.04 64bit. All went well except when I did the manual partitioning I screwed up and instead of setting the existing /home partition to 'use but don't format' - which I think is what I must have done last time - I left it as 'don't use and don't format'. So, obviously, now the new 10.04 install has its /home inside /, which I don't want. I want it on the existing /home partition as it was with the previous 10.04 install.
Question(s): Is there any simple(ish) way of doing this without a reinstall? Not a major problem as I have only just installed and can do it again without losing anything but time, but I would like to figure out a way to do it without if possible.I want to essentially move the /home/user directory (rather than the /home) and make it /media/home/user inside the existing partition. Seems easy enough on the surface but becomes involved as I investigate.Ubuntu 10.04 minimal install with Xfce DE.
i have instaled ubuntu 11.04 wubi on my pc with windows 7. i installed and everything was going ok i navigate on ubuntu already. but the problems star here i went on my ubuntu to the partition section and i format my windows partion to be the home partion and changed the nfts to ext, i did the upgrades but i forgot that theyr running yet and i restart my computer when it boot again it gaves me an error:
try (0,0) : nfts5 : wubildr
try (0,1) : ext2 :
and the windows7 says that i have to instal again. so i went to another pc and i made a cd boot and a pen boot. i burned the iso (downloaded from the ubuntu oficial site the 11.04 32 bit version) image to the cd and pen drive prperly, i adjust my boot options to star from usb or cd rom and nothing im struck.
I was wondering what the best way is to partition multiple distros to share one home partition.
View 8 Replies View RelatedI have finally been convinced to partition my 500GB hard drive from a two partition setup with root and swap to a three partition setup with root, swap, and home. I found a nice tutorial about how to do this, but here is my question:
A) How much space do I leave for the root partition and the home partition?
Installed Ubuntu along with Debian on my Notebook and use Grub Manager to choose between them on startup. Since i like Debian now a lot (in past days it was a very hard system to handle, but there has been some progress i noticed), i have to change some things (want Debian as main system now) For Ubuntu i have: (was meant to be main system on Notebook) "/", "/home" and a "swap" partition, but since i am now going to use mainly Debian, i wanted to store my files all in the "/home"-folder of my extended Ubuntu partition (has much more space available) not in the "/home" folder of the Debian system. So i want both (Debian and Ubuntu) to use the same extended partition ("/home") which i created for Ubuntu to save their files like downloads, videos, and so on.
View 14 Replies View RelatedMy debian 5 is up and running smoothly and act as file-server in the middle of windows network jungle using samba the only problem is, after backup an external hdd (213 GB) to my /home partition, I end up with message say that I'm running out free space. Fyi my debian installed on 1TB SATA disk, and I separate my /home partition from system what happen to my free space ? here is screenshot of my disk, using disk usage analyzer: is there is a way to get my space back or something missing on my setup.or I have to reinstall my debian and use LVM when partitioning my disk?
View 8 Replies View RelatedI installed fedora 13 64 bit and it works great but I encountered several issues when setting up guest OS with KVM. The problem seems to be related to selinux. But let me first ask question about logical volume. By Default fedora created logical volumes:
[Code].....
"If you expect that you or other users will store data on the system, create a separate partition for the /home directory within a volume group. With a separate /home partition, you may upgrade or reinstall Fedora without erasing user data files." seems to suggest I have to create a separate physical partition and assign that to /home. But reading elsewhere it seems to suggest logical volume acts like a partition. My goal is to make it easy in case fedora is hosed and I have to re-install it without affecting /home where my cirtical data resides. Given above do I need to create a separate physical partition or I am just fine?
I have a second hard disk that originally had windows and all my data. Windows is hosed but I can see my data from within Fedora and Windows is gone and I created created new partition in its place which used ot be the C:/ drive appears as 53 Gb filesystem. My data which was originally D drive appears as 215 GB filesystem. As given in [URL] I want to create a new logical volume in 53 Gb filesystem which I want to use as space for virtual disk to install guest OS's in KVM. Currrently 53 GB filesystem is mounted as /media/3467BH89JK789 but this does not work well with KVM. how do I create this logical volume out of 53 Gb filesystem partition and add proper selinux info and do I add to vg_vostrolx volume group and in a different volume group?
KDE 4.6 - opensuse 11.4.
I have a separate ext4 partition which contains all my data (music, movies, etc). When I delete files from this partition it is very slow because it copies files from my data partition to the Trash folder in my home partition. How can I avoid this? Can't the trash be configured so that it uses a trash folder in each partition instead of copying files to another partition (which is slow).
i installed fedora kde 32 bit and iam realy loving it. but i want to resize my home partition as i got a message there is no space in my home folder i downloaded a Disk utility application .... to try and resize .... but looks like i dont know what to do
View 3 Replies View RelatedI was surprised not to find an existing thread on this anywhere, as I would expect this to be a common problem: I have the following partitions on my eee PC 100HE:
10GB Windows XP
5GB Linux Mint 8
5GB Ubuntu 9.10 NBR (awesome distro by the way!)
130GB Home partition shared by Linux Mint and Ubuntu NBR
2GB Swap partition shared by Linux Mint and Ubuntu NBR
I installed Ubuntu NBR after Mint. Immediately after install, the panel layout, menus and colour scheme were slightly messed up - presumeably because they had been "adopted" from the Mint settings in the home folder. I corrected them easily, but now I have the same problem in Mint. Is there any way I can get both distros to use the same /home folder, but different settings (i.e. the /home/username/. folders)? Can I get these settings folders put on a different partition for example?
And is this problem due only to the fact that these are 2 Ubuntu-based distros? Or will I have the same problem if/when I replace Mint with another distro, such as Fedora or Moblin?
Summary: I want to have /var (and perhaps /tmp and/or /etc) to be on the same partition as /home.
Right now I have a simple setup. 7.4 GB /dev/sda2 mounted as / and 137 GB /dev/sda3 mounted as /home. /var is important, because that's where I have tens of MySQL databases. This setup causes several problems: * I'd like to have /var separately from / so that I can freely erase everything on /dev/sda2 and start over. * I'm running out of space (~800MB free) and I'm afraid that it might not be enough to dist-upgrade to Lucid.
I tried copying /var to /home/var and making a symlink to it, but that didn't work (had to reverse it from LiveUSB).
How should it be done properly? I've read something about bind in fstab, but haven't found a straightforward solution.
that's my fstab:
Code:
# / was on /dev/sda2 during installation
UUID=6aaab958-6d51-41f1-8c07-e1139fc9b222 / ext4 errors=remount-ro 0 1
# /home was on /dev/sda3 during installation
[Code].....
I am laying the groundwork to set up a separate /home partition as this seems the best way to safeguard all my settings and files from disaster.
I have read a number of howto's on the subject but they haven't used the same method - it seems to me.
Firstly I'm quite happy about the partitioning element of the process. I need to shrink my current Ubuntu partition and create a new one for my /home folder, after making a note of the uuid (as I will need that later).
How big does the root partition need to be to accommodate any future updates/kernels etc?
Is ext4 advisable for the new /home partition?
The process after partitioning seems somewhat complicated, from what I've been reading. Basically the process involves copying my existing /home folder to the new location, telling the OS to mount that new /home partition instead of the old /home, then deleting or renaming the old /home.
However, in practise it doesn't look that simple. There seem to be many terminal commands involved that I don't understand.
I'm a Linux newbie and trying put ubuntu jaunty for a while now. So far it's been a nice experience , so I want to devote more disk space to ubuntu. I'm currently dual booting with winxp sp2 and recently I've used Gparted to cut down about 20Gb from windows and reformatted it as ext3.But the problem is i don't know how to add it to home so that i dont have to mount it every time.
View 1 Replies View RelatedI keep my /home on a separate partition. After every clean install of Ubuntu my old panel configuration is loaded. Meaning, shortcuts on my panel and different applets I've put on my panels as well.
what file in the /home folder is keeping these settings? Simply, I'd like to delete so I can have that "fresh" install feeling on my desktop.
What's the size of your /home partition? I'm thinking about 1~2 GB, but then there is Wine's C drive. Is it good to move the C drive folder on another partition and pointing to it with a symbolic link?
View 3 Replies View RelatedWhen I powered-up my computer today I received the message that the home partition listed in /etc/fstab cannot be mounted and to press ESC to go to the recovery shell.
My computer is dual-boot, with Windows on the first hard disk (sda) and Ubuntu 9.10 on the second hard disk (sdb); I am using Grub version 1.97 beta4. The home partition is thus on sdb2 and the file system is ext4.
The /etc/fstab file contains all the partitions and has not changed since last October. Also, when issuing the command fdisk l, all partitions are correctly displayed, including the home that cannot be mounted.
Finally, the command fsck /dev/sdb2 quickly returns the result that /dev/sdb2 is clean!
I know there is a lot of tutorials about this but I`m kind a new in Ubuntu and Linux. I know that it is good to set different partition for /home. But when I installed my ubuntu 9.10 I made 4 partitions
swap
/boot
/ - 40GB
/usr - 200GB
[Code]...
I am reaching the upper limit of my /home partition. As shown in the image attached, my /home is located in /sba3, and I have an additional partition for storage in /sba6. Since Lucid Lynx is about to be released, is it possible using the GPart software on the LiveCD to remove the /sba6 partition, add 1 GiB to my swap partition and the rest to /home without messing up all of my data in /home? So far in my search of the forum I have not come across anything exactly touching this subject, so I am requesting some guidance before proceeding. I have already back up all of my data for a full clean install if it comes to that.
View 2 Replies View RelatedI have a Dell laptop with dual-boot Vista-Ubuntu. I never ever used Vista and am not planning to.I'd like to move from 9.04 to 10.04. I know how to backup and run an update already. But for the sake of simplicity, i'd prefer to erase the data of the current Vista-partition and use it as my /home content.It makes more sense to me, so i don't have to make a backup of everything for ever again and again when installing or updating my OS.
View 9 Replies View RelatedI'd like to set my comp up to dual boot with lucid and the maverick alpha. Currently I have lucid with a separate home partition. Is it possible to have both instances of ubuntu using the same home partition? or will this corrupt it in some way?
View 6 Replies View Relatedcan a fat32 partition be marked as /usr or /home during or after installing ubuntu?
View 5 Replies View RelatedI just want to know if I can share my /home partition... I mean, I have 3 partitions swap, / with Ubuntu NBR and /home and want to install another distro (in a 4 partition), double boot and share /home.
If my /home partition is encrypted by Ubuntu, can I share it with another distro?
What I want to "also" use is Ubuntu Moblin Remix or meego.
ubuntu 10.04
kernel 2.6.36
Code:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda2 17301912 4858836 11564180 30% /
proc 0 0 0 - /proc
none 0 0 0 - /sys
[code]....
Code:
hb lost+found
"home" is partition with 8gb
"hb" is my space With baobab disk usage analyzer the size of "hb" folder = 1.8 gb
Why partition home is full
I have installed various distros/releases of linux over the past few days and have read of a few people keeping separate partitions for their /home folders. I have a few questions:
1) I assume /home is installed with the OS and would always be on the OS partition.
2) Can I repartition the drive even though I am already installed to allocate space or would I have to start from scratch, create the partitions, and reinstall the OS?
3) How much space would one need for a home folder? Majority of hdd right?
I would like to mount a partition on a second disk as /home. I have two hdds. one is 250gigs that I wish to use for the / of two or more os'. The other is 1TB that I would like to use as /home/charlie and /home/prisca as well as some other partitions. Here is my current /etc/fstab
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda6 during installation
[code]....
I bought a new computer that has Windows preinstalled and I want to install Ubuntu to dual boot. I'm considering making /home on a separate Windows partition in Gparted.. would it slow the performance significantly if I used this setup? I'd like to be able to access my important files regardless of whether I boot into Windows or Linux..
View 4 Replies View RelatedI have a dual boot machine. I have changed "My Documents" in Windows 7 to my G partition to the folder "G/Windows data" I have just bought a Buffalo networked 1TB LinkStation backup drive for our two desktops and notebook, and the backup software is useless for Linux and Windows 7 - won't install with anything later than XP! So I will want a linux program to backup the two folders in Drive G to the LinkStation every day, automatically - if that is possible. I now want to change my /Home drive to another folder in the G drive called "G/Ubuntu data"
View 9 Replies View Related
