After many failures, I succesfully compiled Gnome Shell from GIT. I already did about two months ago on the same machine and everything went ace. This time, when trying to finally launch it with ./gnome-shell --replace, the windows briefly disappear, the screen flashes for a few seconds but the Unity or the Classic Ubuntu desktop are restored normally. This is the output in the terminal:
Is there any way I can switch my desktop shell from unity to, say, gnome-shell? I can switch using other console shell I like (bash, csh, fish, etc.). Assume that there is a stable alternative desktop shell, I should be able to choose, too.
(For console shell, we goes to /etc/passwd. But for desktop, I can't find the way to config.)
is there some wiki page on GNOME or Fedora that list which graphics cards work without problems on Fedora 15 with GNOME Shell? I have tried 3 older cards and they all failed, so I would like to share this info with others so people know which cards to avoid if they want to use full features of GNOME 3 via GNOME Shell.
Please excuse my ignorance, but I need to get it straight. I've been reading and trying to find out more about these three new desktop environments, but still am rather confused. I have had Unity on my netbook for a couple of months now and know it inside out (more or less by now). The problem is: what is the main difference between Gnome 3 and Gnome Shell?
To my understanding Gnome 3 will be a continuation of the panelled Gnome we are so used to? But then I read the panels will be gone forever, so I'm confused again Gnome Shell is somewhat similar-looking to Unity, but I haven't had a chance to try it properly yet.
How to launch a graphical application using gnome-schedule ? I got some tutorials about cron after googling . But I couldn't understand the stuff about Screen number As an example, please tell what should be typed in "Task:" to launch say, nautilus
I can no longer launch an email to a contact from gnome-do. I select a contact (using Gmail Contacts plugin) in the first pane, "Email" in the second pane, hit return and get nothing. I use Evolution as my email client because I like the tight integration with the gnome desktop. Previously, in Lucid 10.04 if I'm remembering correctly, this action in Gnome-Do would launch an Evolution email window with the To: field already populated. I'm running 32-bit 10.10 Maverick. Evidently there was a similar bug for Thunderbird that has been fixed. [URL] And something similar when using chrome as preferred email client: [URL]
I'm using 11.04 with the old panels, no side panel. For some reason gnome-panel doesn't launch automatically so I have to do it via terminal, which means I have to keep the terminal tab open if I want to keep my panels.
Adding it to startup programs resulted in invisible panels (Cannot register the panel shell: there is already one running.), which I bypassed by typing gnome-panel --replace. I would like a permanent solution though..
Does anyone know of some things I can check to find the root cause behind this error? I pulled startupmanager via apt-get, and I get an error when I try to launch the startupmanager executable from a terminal in Gnome.
Generating grub.cfg ... Found linux image: /boot/vmlinuz-2.6.35-24-generic Found initrd image: /boot/initrd.img-2.6.35-24-generic
Noticed this last night, when I try and launch either Firefox or Thunderbird using the GNOME menu or the quick launch icons, it fails. I am able to launch them both from the command line in a terminal. Other applications seem to launch fine, so I'm at a bit of a loss where to begin taking this apart... I do get a task in the task bar that says "Launching Firefox", but then nothing comes up. The same thing happens with Thunderbird. That task just goes away. Another odd thing - following a reboot the launch buttons work once. If I close them, they won't launch again unless I run them from a terminal window.
I cannot launch gnome-terminal from the Applications -> System Tools -> Terminal menu. However a gnome-terminal process is created (I can see it in a terminal that I happened to have open) but it doesn't seem to actually run (I have several of these terminals in the ps list now but they haven't actually run as terminals and it's been at least 2 hrs). At first I thought they weren't running at all until I checked (it looked like the Starting Terminal message at the bottom of the gnome GUI ran abnormally long and then terminated so I thought at first that they weren't running at all).
Also it looks like my gnome session is clobbering the CPU: running at or over 80% of cpu time at times (it does change but mostly it is high). All I'm doing is minor web work + updating a file in Open Office - when I noticed this I got out of Open Office and that had no effect. So it looks like application software is running (this was launched from a terminal) but running from the menu seems to result in processes with low priority (that doesn't seem right though). This just started today and my system has been mostly running correctly for a year or so (last year I got an Acer 5532 on sale, wiped it and installed Fedora 11).
I work on a number of servers and do so many repetitive tasks that it's easier for me to make launchers on my desktop for these tasks. It's also necessary for opening windows in my secondary screen. I like to view the error logs as I work, so I have a screen session on my servers that 'tail -f /the/error.log' for easy viewing. I set up a launcher on my desktop that launches the following command:
Code: gnome-terminal --display :0.1 --geometry=156x33 -x ssh -t my-server 'screen -r' The command works perfectly. The window is created on the correct screen, with the correct size and information. The problem is gnome-terminal will exit/crash with no errors after a little while. This happens sometimes when I get up from my computer as well as while I am working on it.
I am saying that there are no errors because I have opened a terminal and ran the command in that terminal. When the new gnome-terminal closes, there are no errors or abnormal output on the generating gnome-terminal.
Fresh Squeeze install: I have AWN running and right now I have used gconf-editor to stop gnome-panel from being a part of the Gnome Sessions. I think it was in Desktop -> Sessions -> Default Settings..or something like that. Before I did this I was just clearing out the entries for the top panel, using Apps -> Panel -> and then it was top_panel or something like that. I'm at work so I cannot fully verify, after I deleted the bottom panel. This still allowed me to use ALT + F2 to bring up the run prompt.
Since removing gnome-panel from the session, I cannot use ALT + F2 anymore. If I were to put gnome-panel back, is there a way to keep the panels from recreating themselves after I remove them from within gconf-editor? If I leave gnome-session alone, whenever I reboot the top panel keeps coming back. I have everything I want running out of the AWN dock, so I want to remove the panels completely but still have the ability to launch the run prompt.
I use ctrl + shift + s to launch synaptic in KDE. That works wonderful and it is standardized on all my systems. I want to define the same in gnome, so that it does not matter if I'm in gnome or KDE.Where can I do this?Now before you start mentioning, I am familiar with keyboard launchers like launchy or gnome do (but have to admit that I don't know that much what gnome do does in all extents), so I am not looking for a program that launches an app after typing a few letters. I want exactly that keyboard combination, everything else will not do it.
I just mention that, because it happens all the time that I see in my posts that I ask: How can I do B with Y? I don't want to use Z. (specifically asking the question) and then hear as an answer: you can do B with Z!And I am always tempted to answer: That is not what I asked, I asked something specific and got an answer that does not concern it.
I have a java program that needs to be launched with root privileges (from an account that doesn't have root privileges) from a desktop shortcut. The command would look something like this: java -jar /file/location/whatever.jar I've searched and searched and can't figure out how to do this. EDIT*** I would like it to pop up and ask for the root password before it launches the application.
I installed Gnome 3 on Natty successfully, despite some minor glitches. It works fine, but recently I found some nice screenshots that looks quite different from which I get, and from others I saw before. You can found it in this link: [URL] Some one knows to what the differences are due?
I just upgraded to beta 10.04, & am trying to get GNOME-shell installed. I have downloaded the tar file for it, but when I do ./configure in a terminal, I get the following error messages: No package 'mutter-plugins' found No package 'gjs-gi-1.0' found No package 'gobject-introspection-1.0' found
When trying to install gnome-shell I get this error: sudo apt-get install gnome-shell davek@davek-laptop:~$ sudo apt-get install gnome-shell Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming.
The following information may help to resolve the situation: The following packages have unmet dependencies: gnome-shell: Depends: libgjs0 but it is not going to be installed E: Broken packages davek@davek-laptop:~$ What would be needed to fix broken packages? I'm running 10.04 32bit
I have seen many reviews of 11.04 beta with option to upgrade from 10.10. Can somebody confirm that it could be done without damaging the present gnome. I do not want Gnome shell/Unity as the DE in 11.04 too.
the whole "Unity" thing didn't appeal to me that much, i installed gnome-shell.everything went well except there doesnt seem to be any themes to windows and stuff now, the gnome-shell looks great, but open up a program or file browser and its all grey and buttons and menus are blocks, no minimize or maximize buttons (not sure if thats a gnome thing now) but just a blocky X in the top right corner to close windows.
gnome-shell seems to go into loco mode sometimes on my computer... among other problems I'm having this one is the worst. So far, it *seems* to happen after a flash movie is loaded in firefox, although I can't tell for sure if that's the case... Flash performance for some reason is crap anyways on here, I don't know if maybe I need a different version of flash? Anyways, if you guys have any clues as to wth is going on, that would be awesome! I'm a bit of a newbie so treat me nicely
Just a quick update - reloading with r seems to fix the CPU usage issue... until it happens again...
I've noticed when someone calls attention to my name in xchat or if I get an instant message, I don't get a notification about it unless I happen to go into the dash. Then I see someone highlighted my name or instant messaged me. Is anybody else having this?
I changed the resolution in Gnome to something that my monitor cannot recognize. However, I can get into the shell, and am wondering if their is a way to change the Gnome resolution via the shell commands.
I'm attempting to play around with Gnome Shell, both in Lucid, and now in the Maverick Alpha. However, when I attempt to install it (from software center), I get an error.
Code: Package Dependencies could not be resolved. This error could be caused by required additional software packages which are missing or not installable. Furthermore there could be a conflict between software packages which are not allowed to be installed at the same time. Details > gnome-shell What dependency is missing from the repository?
I've updated to Maverick and I'm running Gnome Shell at login, the version from the repos.
My problem is that Tomboy in the tray does does not list the titles of my notes. There's just the yellow note icon. The rest of the text (Synchronize, Preferences, etc) all work normally.
If I log in to the normal Ubuntu desktop, there is no problem with Tomboy.
I just installed GS following the instructions here:[URL]... and the classic way of getting GS to start at login (adding gnome-shell --replace in start up applications) doesnt work.
To start GS now we have to use the command "~/gnome-shell/source/gnome-shell/src/gnome-shell --replace" via the terminal adding that to start up doesnt work either, does anyone know how to get GS to start at login?
