I got a TV I'm using as a monitor, and it has support for 1080p (1920x1080 resolution), but I can't change it to that. I've tried using the graphical monitor preferences and adding to to xrandr manually and trying to change it, but it doesn't work.
The computer I'm using has a (crappy) intel g31 graphics chipset, could this be why? I looked it up and it says it should support it. It also says that it needs a special fix/driver because they had problems, but I can't/don't know how to get the driver on ubuntu.
The native resolution of my monitor is 1920x1080. I can't get Ubuntu 10.04 to display at this resolution. Current xorg.conf (relevant sections):
[Code]....
I was able to get the terminals to run at 1920x1080 by adding Code: video=sisfb:mode:1920x1080x32,rate:70,mem:4096 to my grub command. That's nice, but I really want Xorg running at that resolution, and it didn't. I've been working on this for hours, through dozens of gdm restarts with every variation of the above I can think of.?
I have a Sony Vaio vpc-sb1v9e connected to a Asus22ti1 monitor. I have installed Debian 8.1 and the resolution is 1920x1080 with the hdmi port connected. The problem is that the desktop not fit the monitor size, and is more large and more higher than the monitor.
Here Code: Select allxrandr output:
Code: Select allmichele@nbook:~$ xrandr Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 LVDS1 connected (normal left inverted right x axis y axis) Â Â 1366x768Â Â Â 59.94 + Â Â 1360x768Â Â Â 59.80Â Â 59.96Â Â Â 1024x768Â Â Â 60.00Â Â Â 800x600Â Â Â Â 60.32Â Â 56.25Â Â Â 640x480Â Â Â Â 59.94Â VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis)
[Code] .....
What's the problem? How can I restore the correct size?
I recently bought a 37" Vizio M370NV HDTV and connected it to my Kubuntu 10.10 desktop.Currently my resolution is 1280x1024, so there is black bars on the side of my screen. I want my resolution to be 1920x1080, which is what the TV/monitor says is it's primary resolution. However, when I set that resolution in nvidia-settings, my screen scrolls up. By that I mean that my screen keeps moving up my monitor and appearing at the bottom.
It's looking like from the options on the grub CL that the highest I can go is 1280x1020x32bit. But it still does not fit my entire screen (23'' LED) if there is a way to make runlevel 3 1920x1080, I have a Nvidia GTX460. Also, whether or not I can do it, how do I save the settings, so I don't have to type it in at the bottom of the screen in the boot menu? How do I drop back to runlevel 3, when I'm in the x system (GUI)?
Alright guys. I need to find a way to enable a black screen screensaver (or turn off the monitor, or something to avoid burn in) while the machine is sitting at the login screen and completely turn off the ability for the computer to sleep. how I can accomplish that?
Was wondering if its possible to scale ubuntu theme/environment to suite 1920x1080. Im using my comp on a 42" plasma TV, and it gets kinda small with the default scale.
Don't want to change to a lower res, simple because it's not as pretty and the toolbars are almost hidden.
I just installed ubuntu 9.10 32-bit on my parents computer. My dad was having this weird problem where it would only randomly allow him to log in every few tries. Let's say every 1 out of 12 tries.
I believe I have figured what is keeping him from logging in. Only on his user is there an issue with logging in. Only on his desktop have I turned the screen resolution down. From 1152 to 1024.
The usual sequence goes like this - - I choose his user - I enter his correct password - It appears to be logging in, half the log in sound happens and the splash screen runs for 6 or so seconds - The splash screen flickers between a 1152 and 1024 resolution - Reverts back to the log in screen, his desktop is never visible.
any ideas on how to fix this? The computer in question is a Compaq Presario circa 2000-2001 if that makes any difference. I have not looked into the video card make yet
I recently installed Deluge 1.2.0 from the following PPA:[URL]I using this on two different Linux computers. One is running Linux Mint 8 and the other is running Ubuntu Netbook Remix 9.10. The first time on either computer when I enable WebUI in the Deluge GUI it works fine. However if I ever disable it in plugins section I am subsequently unable to re-enable it (doesn't appear in the side panel again). Rebooting or reinstalling Deluge seems to have no effect.Is this a bug or am I doing something wrong?
I have a serious problem: I just installed Ubuntu 10.04 on my computer which has a Hanspree HF257 25-inch monitor with a native resolution of 19201080. I have an NVIDIA GeForce 9400GT graphics card, and before I installed the proprietary NVIDIA drivers, the screen resolution was fine, but after I installed the recommended drivers, the screen resolution went way down after restart!
The monitor is recognized only as a "CRT-1 (CRT-1 on GPU-0)″ under the NVIDIA X-Server settings. The highest resolution I can adjust it to is 1360768. I have no idea what to do, but I'm sure there's a fix for this, right?
I finally decided to replace my monitor. I got a HANNspree HF225 with a native resolution of 1920x1080.
Alas, my Ubuntu 8.04 only allows me to select the 1400x1050 (50Hz) as the highest resolution.
I tried using gksudo displayconfig-gtk, to no avail. (yes, I also tried selecting Generic LCD display 1920x1080).
The strange thing is the monitor itself (via its OSD information) says it is running 1680x1050 (at H: 65.6KHz V: 60.3Hz).
Clearly, Ubuntu 8.04 can't see the real hardware capabilities of my system. My graphics card is "nVidia Corporation NV44 [GeForce 6200 LE] (rev a1)". I know it is capable of delivering the 1920x1680 because it has been previously driving 1920x1600 on a DELL P1110.
I installed Natty about a month ago. First time i installed, i got this same problem.Installation pendrive works on 1920x1080, and the first time it boot it was lovely.I did all the recommended installs, including ATI / AMD proprietary FGLRX Drivers, and the second time my machine boot, it came on 1600x1200. I did some troubleshooting with xrandr, and was able to get HD resolution again, until i rebooted, and then i couldn't even get it with Xrandr.
This is really driving me nuts. I was able to get it fixed by going into recovery mode, and running ubuntu in low graphics mode, i was choosing reconfigure and it worked sometimes, but now i'm stucked with 1600x1200 and i hate it. I don't want to go back to windows, and i really followed every trhead i found with solutions and can't get it to work.I forgot to mention that i have an Ati Radeon 4670 video card. Also i am a total n00b on linux, i am good at following instructions though
I'm new to Ubuntu Linux but have many years on windows platform. Please can someone help me with how to change the following items.
No.1 I would like to change the HORRIBLE!! YAK!! brown background color behind the word Ubuntu in the start up screen when the machine loads up (before the login). I have located the image file for this which I have found to be: /usr/share/images/xsplash/bg_2560x1600. jpg but the OS says that root is the owner and that I don't have permission to change this. So how can I change this for a color I do like.
No.2 I would also like to change the login dialogue screen style. I know this is possible but again I'm fumbling to see how I can do this. I have tried with the start up manager but every attempt fails, the settings don't take. Once again I suspect permissions are at the bottom of the problem?
No.3 Would like to have a colorful splash screen image on boot up, I've managed to remove the old one (small white 3 ring ubuntu logo on black background) but havent been able to install or replace with a new one. Its been incredibly frustrating, I'm feel sure I'm missing something simple here. Wondering if its permissions yet again?
Anyone who can offer help on any of the above, guidance or advise me would be much appreciated. Please bear in mind that I'm still very much feeling my way with Linux so keep it simple.
I just installed Ubuntu 9.10 I have ATi HD5700 and its Catalyst drivers downloaded from http://ati.amd.com
The monitor is Hanns-G HH251 (25", 1920x1080@60 max) I cannot make either "Display Settings" or "ATI Configuration" to show the refresh rate of 60 Hz as available. When I change the resolution to 1440x900 then I can pick 60 (but obviously I don't want that resolution). However, if I pick 1920x1080, the only two refresh rates available are 25 and 30 Hz, causing the image to flicker and whatnot.
I just put a HTPC together, it's a MSI 890GXM-G65 RT motherboard (on-board video, no video card) connected to a TV (SAMSUNG LED UN40B70) via an HDMI cable. I've put latest Ubuntu Desktop 10.10 on it. Installation went beautifully, the screen placed correctly, However, once it was actually running, the display is totally wrong. Looks like it's too far to the left and up - there's nothing on the screen except for background, at 1920x1080 resolution. Once I change the resolution to lower, it works.
I just bought a new laptop with 1920x1080 resolution. I installed Ubuntu 11.04 via "wubi" just now, however everything in ubuntu is too small to keep my eye comfortable. I searched the web and forum and tried to enlarge those, but the solution was about Ubuntu front and folder icon only (change in "appreance", and "edit->preference"). The front and icon are still small in other applications, such as Google chrome, firefox. Note: the change of front size in chrome and firefox only changes those on the page, but not page background, not the size in tab and anything else.
I'm trying to reorganize my files and organize my music on Rhythmbox, but I've run into a really annoying problem. The cover art for one song on a particular album isn't right. All the other songs in the album are displaying properly.
I have the album cover in the same folder that the music is in with the name "Cover.jpg".
I've tried about everything I can think of. I've tried renaming the image file, tried dragging it to the album art area in the player, and I've tried moving it to the Rhythmbox folder under the name "~/.gnome2/rhythmbox/covers/Artist Name - Album Name.jpg" (Of course inserting the correct album name and artist name exactly the way it is shown in Rhythmbox). It will change if I drag and drop it, but once I go back and play the song again, it will revert to the wrong cover art.
After 2 weeks of the nightmare that is KDE4 I've been driven back to S12.2 and the sanity of KDE3.5.
However, I'm unable to get higher res than 1024x768. Monitor is a BenQ G222HDL and card is an ATI Radeon HD4760.
Relevant section of my xorg.conf is:
As you can see I've mucked about a little bit with alternative drivers and resolutions and poked around via google without anything obvious popping up, but I suppose the driver is the issue. # randr only ever gives me 'can't open display'. I realize this is a new monitor on an older OS. Should I try the xf86 drivers from ATI, or will running xorgconfig do the trick with such a new card?
I installed Ubuntu 10.04 on a new system. The system is not showing correct resolution in the grub menu and the splash screen is black, until I reach the logon screen.Screen resolution, and video rendering after booting is picture-perfect.I presume this is a bug of the sort "VBE does not support 1920x1080 wide screen resolution".Or, maybe I am missing some point.I hope there must be some workaround.
So i pulled some files off my buddy's computer via my wireless home network, i can access them but in the permission tab the owner is "nobody" so i can move the files. How can i change the permissions to enable me to move the files?
i used to have 9.10 but now upgraded to the latest version. Back then I changed the background to full black for both the preboot screen and login screen.Now after upgrading it changed it to the purple color screen. I am wondering how I can change back the background color?
I have Fedora 13 installed on my laptop. For some reason it always seems to run at 1GHz even though the maximum is 1.67GHz (even under 100% load).
The output of cpufreq-info code...
I tried changing the limits by setting cpufreq-set -r -g userspace -c 0 -d 1000MHz -u 1670MHz but the output it still identical (in particular "frequency should be within 1000 MHz and 1000 MHz").
Im using a Vizio 22" 1080p LCD HDTV has a monitor for my Ubuntu server over HDMI. It works great, except I cannot see the top or bottom bar at any resolution. Id really like to get it working at 1920x1080. Ive been tinkering with the xorg.conf a bit to no avail.
I've instaled 11.4 and in personal configurations the resolution is set fine (1920x1080), but it's don't maximizes all monitor area. I'm using Radeon 5670 with a TV/Monitor HDMI connection 1080p.In Win7 running fine.
I would like to be able to change my BIOS setting to enable me to access a live cd or dvd to try some Linux Distros. At the moment ,when I access the BIOs ,it willl not stay as adjusted ,it ignores the settings ,it goes to default.
I have noticed that, using nvidia's latest drivers, HDMi output to my 32" LCD (1920x1080) and totem or vlc, the video on my LCD gets a bit "choppy" when the image changes faster.. some bars start appearing on the moving parts of the image.. like the system is having trouble rendering the video. This doesn't happen on my laptop screen even when both displays are running at the same time.
Also, this problem doesn't appear in windows 7, everything works perfectly there with one odd thing... the picture gets "choppy" on the laptop screen when I'm running both at the same time. It's not that noticeable, but I can tell the difference between windows and ubuntu in quality and it's annoying me
I have a problem with the screen resolution in that most of the time it defaults to 800 x 600. However on occasions when I switch on the resolution increases however just today when it happened after typing in my password it refused to log me in.
Before anyone asks my password is in lower case and the NUMLOCK is off and I know I'm not mis-typing it.
here's the strange bit, when I reset the computer and the resolution goes back to 800 x 600 it then accepts my password. go figure!
I recently upgraded from Lucid to Maverick I can't seem to disable screen lock after resume from suspend. It's a minor annoyance, but still a considerable annoyance to have to enter my password every time the computer wakes up.
I've thusfar
1 - changed screensaver preferences to not lock
2 - set the gnome_keyring_hibernate, gnome_keyring_suspend, hibernate, and suspend, values all to false in gconf-editor
3 - commented out the line LOCK_SCREEN=true in /etc/default/acpi-support
BUT am still being prompted for a password every time the computer wakes up from suspend. I'm stumped, what could I be forgetting?
I have done a fresh install of ubuntu 11.04. Everything is fine, Ubuntu seemed to be using the opensource ati drivers upon first boot. Then prompted that I install the ati catalyst control center/drivers from additional drivers which I did.Again smooth sailing untill I decided to enable my HD tv (hdmi) as my secondary screen. This again worked fine cloned. But I could not enable extended. The option is available but requires xinerama to be enabled.
After restarting I could not login. Read up on this and others have has this issue with different cards. I proceeded to login to ubuntu (no effects) session and then swtiched off xinerama. (this did work in this session). The issue is getting it to work with unity. Logged back into unity now but I don't know how I can enable dual screens in extended mode. There are recomendations on other threads advising to use the open source drivers. But these don't work correctly. The card I am using is an ASUS EAH5570. This I believe has the radeon 5570 chip.
I've been working on this off and on for the last couple of days and I can't seem to get this working. I'm using the latest Catalyst Control Center (11.5) and I've also got xorg.conf set up for this resolution. If I switch the driver in xorg.conf to radeon from fglrx, I can get my 1920x1080 resolution (only on GNOME;the login screen and Fluxbox have a black bar on the left that cuts off about a quarter of the screen). When using fglrx and Catalyst Control Center, I can only get a maximum resolution of 1600x1200.
