Ubuntu :: Can't Autostart And Automount RAID5 Created With Mdadm But It Starts Manually
Jan 17, 2011
Relatively inexperienced user using Linux/ubuntu. Not too savvy I admit and like to use GUI as much as possible. Not a great fan of the Terminal window... I have installed a couple weeks ago Ubuntu 10.10 (Desktop Edition) using Alternative install disk (don't ask why!) on 4Gb usb stick. Working fine except one thing with the raid array. I have created a raid5 array made of 6 drives using GUI (Disk Utility). After an expansion of the array (or was it a reinstall of the OS, I can't remember exactly?) the array does not autostart anymore. Of course nor does it automount anymore.
THE WEIRD THING is that I can still start it MANUALLY from the "Disk Utility" GUI after two tries. And it works just fine thereafter!!! The first time i try to start it gives an error (something about /dev/md0_127 being not ready or buisy). THE SECOND TRY ALWAYS WORKS like a charm, the array starts and i can mount it just fine. Here is a screenshot: I have also noticed that there is no entry in fstab for /dev/md0 although I can manually mount it using the same Disk Utility GUI. That is strange to me. Is it normal? i could easily add it manually but Ubuntu it won't boot anymore (i tried and failed, hence the reinstall). I tried for two weeks to find a solution browsing on different forums but the problem is beyond my expertise...
BELOW are further details about my configuration mdadm.conf, fstab, fdisk -l result and other info. I don=t want to loose my data but it would be nice to make this thing work and be able to access my fileserver via vnc instead of having to keep it connected to a lcd monitor as now. This is the blkid result:
[Code]...
View 3 Replies
ADVERTISEMENT
Jul 19, 2011
This is the error message I'm getting when trying to Format the mdadm RAID5 created with 4 drives
Code:
Error creating partition: helper exited with exit code 1: In part_add_partition: device_file=/dev/md1, start=0, size=6001196531712, type=
Entering MS-DOS parser (offset=0, size=6001196531712)
MSDOS_MAGIC found
found partition type 0xee => protective MBR for GPT
Exiting MS-DOS parser
[Code]...
View 3 Replies
View Related
Jun 30, 2011
I know you can fail and then remove a drive from a RAID5 array. This leaves the array in a degraded state.
How can you remove a drive and convert the array to just a regular, clean array?
View 9 Replies
View Related
May 3, 2010
Created my own file server/nas, but get stuck in a problem after couple of months. I have a server with 4x 1,5tb disks, all connected to sata ports and 1 40gb ata133 disk running ubuntu 9.10 x64 amd. I've created a raid5 array using mdadm. It all worked great for couple of months but lately the raid5 array is degraded. disk sdd1 is faulting every few days. I have checked the drive but it is fine. If I re-add the disk and wait for 6 hours my raid5 array is all fine again, but after a few shutdowns, it is degraded.
my mdadm detail:
Quote:
root@ubuntu: sudo mdadm --detail /dev/md0
/dev/md0:
Version : 00.90
Creation Time : Mon Dec 14 13:00:43 2009
Raid Level : raid5
[Code].....
View 9 Replies
View Related
Nov 2, 2010
I have ubuntu server 10.04 on a server with 2.8ghz 1gb ddr2 with the os on a 2gb cf card attached to the IDE channel and a software raid5 with 4 x 750gb drives. On a samba share using these drives I am only getting around 5 MB/s connected via wireless N at 216mbps and my router and server both having gigabit ports. Is a raid 5 supposed to be that slow? I was seeing speeds of anywhere from 20-50MB/s from other people and am just wondering what i am doing wrong to be so far below that.
View 4 Replies
View Related
Jun 14, 2011
I cant seem to get my RAID 5 (consisting of 8 1tb hard drives) assembled for some reason and I have no idea why and cant find any solutions online. Ill go ahead and show what my problem is:
here is all my hard drives:
Code:
server:~$ sudo fdisk -l
Disk /dev/sda: 10.2 GB, 10242892800 bytes
255 heads, 63 sectors/track, 1245 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0004f041
[Code]....
So as you can see the array for those last four look fine however for the first four it marks the last four drives as faulty for some reason. I am kind of clueless to do from this point on honestly, I have data on this array that I'd really like to save.
View 3 Replies
View Related
Jul 27, 2010
after a failed upgrade from 9.10 to 10.04 I had to format my computer and do a clean install of 10.04, and now my mdadm raid5 array wont start.my array is called "The Library", and i believe the space between "The" and "Library" is causing the command disk utility uses to start the array to fail.The exact error isAn error occurred while performing an operation on "The Library" (RAID-5 Array): The operation failed
Error assembling array: mdadm exited with exit code 1: mdadm: unrecognised word on ARRAY line: Library
mdadm: unrecognised word on ARRAY line: Library
[code]....
View 1 Replies
View Related
May 13, 2011
My fileserver initially had 3 1TB drives in RAID 5 configured with mdadm as /dev/md1. (System root is a mirrored raid on /dev/md0) I went to go add a 4th 1TB drive to /dev/md1 and grow the raid 5 accordingly. I was initially following this guide: [URL] but ran into issues on the 3rd and 4th commands. I've been trying a few things to remedy the issue since, but no luck. The drive seems to have been added to /dev/md1 properly, but I can't get the filesystem to resize to 3TB. I also am not entirely sure how /dev/md1p1 got created, but it appears to be the primary partition on the logical device /dev/md1.
Relevent information:
Code:
fdisk -l /dev/md1
Disk /dev/md1: 3000.6 GB, 3000606523392 bytes
2 heads, 4 sectors/track, 732569952 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 65536 bytes / 196608 bytes
Disk identifier: 0xda4939fa .....
The filesystem originated as ext3, I believe its showing up as ext2 in some of these results because I disabled the journal when doing some initial troubleshooting. Not sure what the issue is, but I didn't want to blindly perform operations on the filesystem and risk losing my data.
View 9 Replies
View Related
Feb 18, 2011
I am getting really frustrated with trying to get my RAID5 working again. I had a RAID5 array built with 4 of the Western Digital 1.5tb "Advanced Format" drives, WD15EARS. However, when copying 1.5gb dvd encoded files to the drive, I was getting speeds of ~2mb/s. When researching how to make this faster, I came across all the posts about the Advanced Format drives and how that was causing a lot of issues for a lot of people. It looked like the solution was simple enough: partition starting at sector 64 or 2048 or whatever and then recreate the RAID. However, this is not working for me.
Here are my computer specs:
Motherboard: Gigabyte GA-EP43-DS3L LGA 775 Intel P43 ATX
CPU: Intel Core 2 Duo E8400 Wolfdale 3.0GHz 6MB L2 Cache LGA 775 65W
RAM: 4gb DDR2 1066 (PC2 8500)
Video card: ASUS GeForce 9600GT 512MB 256-bit
Linux: 10.04
[Code].....
View 1 Replies
View Related
Mar 6, 2010
i was adding another disk to my raid 5, all was going well it started the reshape, got past the critical zone, worked for 20mins, but now it seems to have crashed.When i cat /proc/mdstat, or mdadm -D /dev/md0, those programes hang and dont print anything or return.from my kern.log i can see that there was an error on a disk, the raid array removed it, was going to continue the reshape but finished immediately. Anyone know what i should do?
Mar 6 16:20:26 Aries kernel: [1931119.599107] md: reshape of RAID array md0
Mar 6 16:20:26 Aries kernel: [1931119.599107] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
Mar 6 16:20:26 Aries kernel: [1931119.599107] md: using maximum available idle IO bandwidth (but not more
[code]....
View 2 Replies
View Related
Jun 21, 2011
I've been playing with this for hours, and have been unable to figure it out. I tried to convert my RAID5 array of 4 active disks and 1 spare to a RAID6 with 5 active disks.
I did this:
Code:
mdadm --grow /dev/md4 --raid-devices 5 --level 6
Here is what I have on /dev/md4:
Code:
/dev/sde1 active
/dev/sdg1 active
/dev/sdj1 active
/dev/sdf1 active
removed
/dev/sdh5 spare
code....
but it tells me that /dev/sde is busy, and then that it has a bad superblock (From what I've read, I'm sure the bad superblock is just because of the "busy" message). I've tried this with the -f option, too, with no luck.
View 7 Replies
View Related
Feb 15, 2010
I have a problem with my mdadm RAID. I wanted to know if anyone had any experience with shrinking RAID5 arrays. I was growing the array from 5 to 6 devices however the grow got interrupted and it has recovered to 5 drives. The 6th drive is toast and I am unable to re add it to the system. I would like to drive the device listed as "removed". I have tried mdadm /dev/md0 --remove detached and failed with no success. I am running Ubuntu kernel 2.6.28-11 and mdadm is v3.1.1.
Here is output of a "mdadm -D dev/md0"
/dev/md0:
Version : 0.90
Creation Time : Wed Jan 12 00:46:41 2009
Raid Level : raid5
Array Size : 4883812480 (4657.57 GiB 5001.02 GB)
Used Dev Size : 976762496 (931.51 GiB 1000.20 GB)
Raid Devices : 6
Total Devices : 5
Preferred Minor : 0
Persistence : Superblock is persistent
Update Time : Mon Feb 15 20:25:07 2010
State : active, degraded
Active Devices : 5
Working Devices : 5
Failed Devices : 0
Spare Devices : 0
Layout : left-symmetric
Chunk Size : 64K
UUID : 74fa5199:84b88e81:4ae0fbae:92643084
Events : 0.1331010
Number Major Minor RaidDevice State
0 8 16 0 active sync /dev/sdb
1 8 32 1 active sync /dev/sdc
2 8 48 2 active sync /dev/sdd
3 8 0 3 active sync /dev/sda
4 8 64 4 active sync /dev/sde
5 0 0 5 removed
cat /proc/mdstat
Personalities : [raid6] [raid5] [raid4]
md0 : active raid5 sdb[0] sde[4] sda[3] sdd[2] sdc[1]
4883812480 blocks level 5, 64k chunk, algorithm 2 [6/5] [UUUUU_]
unused devices: <none>
View 4 Replies
View Related
Feb 2, 2010
Something weird happened last night and my raid5 failed. I am trying to re activate it and see if my data is dead or what. When I run mdadm -Asv /dev/md0 I get
Code:
mdadm: looking for devices for /dev/md0
mdadm: cannot open device /dev/dm-1: Device or resource busy
mdadm: /dev/dm-1 has wrong uuid.
mdadm: cannot open device /dev/dm-0: Device or resource busy
mdadm: /dev/dm-0 has wrong uuid.
mdadm: cannot open device /dev/sde2: Device or resource busy
mdadm: /dev/sde2 has wrong uuid.
mdadm: cannot open device /dev/sde1: Device or resource busy
mdadm: /dev/sde1 has wrong uuid.
mdadm: cannot open device /dev/sde: Device or resource busy
mdadm: /dev/sde has wrong uuid.
mdadm: cannot open device /dev/sdd: Device or resource busy
mdadm: /dev/sdd has wrong uuid.
mdadm: cannot open device /dev/sdc: Device or resource busy
mdadm: /dev/sdc has wrong uuid.
mdadm: cannot open device /dev/sdb: Device or resource busy
mdadm: /dev/sdb has wrong uuid.
mdadm: cannot open device /dev/sda: Device or resource busy
mdadm: /dev/sda has wrong uuid.
View 4 Replies
View Related
Mar 12, 2011
I'm trying to find out which one is safer when it comes down to recovery process in case of a drive failure
A RAID5 created in mdadm
or
a Stripe RAID created on pure LVM
the RAID is purely for data storage for a SAMBA server, the OS will reside on its own drive.Ideally the RAID physical hard drives should be re-build on another machine in case of catastrophic server failure (mother board problem, or any other random problems as an example)I can't decide which of the 2 software RAID method is more convenient and safest, don't care about performance, it'll be a dedicated server for mass storage, it's going to mirror other 3 file servers on fakeRAIDs (dmraid), it's simply a redundant backup for the backups
The important goal here is portability.from what've read it appears that LVM might be more portable?but according to some dated (2009) info the mdadm seems to be a bit buggy when it comes to rebuilding the array, yet LVM doesn't appear that safe either which one would you pick for ease to rebuild on catastrophic failures?
View 2 Replies
View Related
Jan 25, 2010
I have an old Athlon XP 3000 machine that I keep around as a file server.It's currently got three 1TB drives which I had setup as mdadm raid 5 on FC10. The machine's original drive held the superblock for the raid array and it just had a massive heart attack. I've searched, my biggest source being URL...I can't tell if I can reassemble the superblock info lost with the original hard drive or if I've lost it all...
View 9 Replies
View Related
Apr 26, 2009
I've got a RAID5 array that doesn't want to automount after rebooting. I'm pretty familiar with linux, RAID, and mdadm, and up until now, I've had the RAID5 array working just fine. However, whenever I reboot, the array drops off and won't remount until I manually assemble and then mount the thing. I find this odd because I had everything automounting just fine back in 10.3, and even in 11.0 (I think - not sure on that). Currently, things are working, but I'd really like to not not have to type
Code:
mdadm --assemble /dev/md0 /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1
followed by
Code:
mount /dev/md0 /mnt/data every time I reboot. Even including this in some sort of start-up script seems kludgey... Surely there must be a more elegant way of automatically bringing up a RAID5 array after booting? I'm not sure what information you'll need, so I'm going to go ahead and include as much as I can anticipate...
So having already used the commands:
[Code]....
View 9 Replies
View Related
Mar 10, 2010
I have done lots of searching and I haven't been able to find anyone else with the same problem. Whenever I create a RAID with 'mdadm', regardless of level (I've done linear, 0, and 5) the command I use is:
Code:
mdadm --create --run --verbose /dev/md0 --raid-devices=11 --spare-devices=1 --chunk=256 --level=5 /dev/sd[abcdefghijkl]1
The RAID is build RAID 5 as it should be. However, when I check /proc/partitions it shows under "md3".
[Code]...
View 1 Replies
View Related
Feb 17, 2011
One of the disks in my RAID5 arrays started acting up, giving me some I/O buffer errors and making the RAID stop. disk info
Code:
=== START OF INFORMATION SECTION ===
Device Model: WDC WD10EARS-00Y5B1
Serial Number: WD-WMAV51466805
Firmware Version: 80.00A80
[Code]...
View 9 Replies
View Related
Dec 27, 2010
Not sure if this belongs here or in the upgrade forum but since the upgrade went OK I figured I would post this here. I come from a RedHat background and am not too familiar with the Ubuntu/Debian way of dealing with service startup so this may be simple. I was running 10.04 LTS on a Sony Vaio and did a distribution upgrade to 10.10. When running 10.04 LTS the sshd daemon started on boot and I was able to ssh into the PC. Now that did the update I can start the daemon using the command "sudo /etc/init.d/ssh start" but it doesn't start when the systems boots.
I even tried creating the entries in the /etc/rc.#.d directories like this:
/etc/rc0.d/K20ssh -> ../init.d/ssh
/etc/rc1.d/K20ssh -> ../init.d/ssh
[code]....
View 5 Replies
View Related
Mar 10, 2010
I'm just trying to install Ubuntu server 9.10 to a logical volume manager partition. I have two physical disks of 250GB - each has a 10GB primary partition and 240GB logical partition for LVM
I created partions using 'manual partitioning'.
It shows:
LVM VG grpA 240GB
LVM VG grpB 240GB
SCSI1 (sda) 250GB
#5 logical 240GB K lvm
[Code].....
I want '/' (i.e root) to be on a logical volume in the lvm 'grpA' (on disk sda).
But the installer does not offer creation of Logical Volumes or their format - only seems to go as low as volume group. If I try continuing installer complains that 'no root file system is defined'.
Does anyone know how I create the LV and install with root there?
(On another machine with 9.04 I used the guided partitioning with use entire disk and lvm - that just worked putting root in the lvm... but this current machine needs a specific layout).
View 4 Replies
View Related
Jan 9, 2010
I have no drive failures but just need to recreate a raid5 set as the next free MD disk number. Originally I built a temp OS of debian on a single drive and had 4x2TB drives in a raid5 software array (MD0) this worked fine and allowed me to move all data to it, and remove our old fileserver. I have now pulled out the 4 x 2TB Raid 5 drives and created a new OS on two new 80GB drives, partioned as follows,
MD0 is now 250mb Raid1 as /boot
MD1 is 4GB Raid1 Swap
MD2 is 76GB Raid1 as /
If I turn off and push back in the 4x2TB drives I cannot see a MD3. I presume I would need to create a MD3 from these 4 drives but I dont want to mess things up as its live data. So im here asking for help, or a bit of hand holding to get it done right.
PS - Its a Debian Lenny 5.0.3 Raid1 fresh install replacing a Debian Lenny 5.0.3 on a single disk.
View 2 Replies
View Related
Nov 22, 2009
Here's a brief description of my system:
120GB Sata HDD - Primary OS drive
3 x 1.0TB Sata HDD - Raid 5 array
This is on a C2D MSI P35 Platinum board. Anyway, did a fresh install of F12 on the 120GB, which I had problems with - Anaconda refused to see the drive. Fedora Live could see it fine, and it was listed as an 'nvidia_raid_member' - no idea why, but I completely erased the disc under the Live CD and proceeded to install F12.
Once F12 was installed, I loaded up mdadm to re-activate my Raid 5 array, using 'sudo mdadm --assemble --uuidthe uuid) - and it started with only 2 of the 3 drives. My /dev/sdb drive did not activate into the array, due to what mdadm said was a mismatched UUID. Ok, so I erased /dev/sdb, intending to rebuild the array. Erased /dev/sdb, and then attempted 'sudo mdadm --add /dev/md0 /dev/sdb' and I get this error: "mdadm: Cannot add disks to a 'member' array, perform this operation on the parent container" - I can find NO information on this error message.
[Code].....
I don't believe the hard drives are connected in the exact same order they were in before - I disconnected everything in the system and blew it out (it was pretty dusty)
View 1 Replies
View Related
Jan 11, 2010
I am planning on setting up a 4x1TB RAID5 with mdadm under Ubuntu 9.10. I tried installing mdadm using "sudo apt-get install mdadm", all worked fine except for the following error: Code: Generating array device nodes... /var/lib/dpkg/info/mdadm.postinst: 170: /dev/MAKEDEV: not found failed. The end result is the /dev/md0 device has not been created, as can be seen here:
Code: windsok@beer:~$ mdadm --detail /dev/md0 mdadm: cannot open /dev/md0: No such file or directory After googling, I found the following bug which describes the issue: [URL] However it was reported way back in April 2009, and it does not look like it will be fixed any time soon, so I was wondering if anyone knows a workaround for this bug, to get me up and running?
View 4 Replies
View Related
Feb 10, 2010
Sometime after I upgraded to ubuntu 9.10 I've been having trouble with my wireless network connection.It will usually log on to the network, then disconnect a shortly after. Then try to connect again, usually successfully, then it cuts off again. Then connects again, then disconnects. FWIW, ubuntu 9.10 works on a different machine pretty consistently, so I don't think its a problem with the router.
View 2 Replies
View Related
Aug 1, 2011
I'm a little bit confused with partitioning the filesystem in Linux. the difference between creating the file system with fdisk and mkfs (when formatting the disk). I can't clearly tell my problem, so please look at this picture:
View 2 Replies
View Related
Jul 28, 2010
My Ubuntu is the latest, Ubuntu 10.04 64-bit.
I have 2 hard drives, one holds windows (160gb), another has three partitions, 15gb for ubuntu 10.04, 5gb for swap, and the remaining 480gb formatted as ntfs for files..
The 480gb space is drive D:, my files are located there and i point the apps to get their files from drive D:. For example, "My Music" folder is in drive D:, and so I tell SongBird to grab the music files from that directory.
It's not a big problem, but whenever I restart ubuntu, drive D: does not automatically open so SongBird initially cannot locate the files. What I want to happen is that when ubuntu starts, drive D: is already loaded, so that the applications can grab the files they need from that drive automatically without me having to manually open drive D: everytime ubuntu starts.
View 9 Replies
View Related
Feb 11, 2010
I have coldfusion installed on a guest ubuntu server in virtualbox, it is configured with apache2 & everything works great. But how do i get Coldfusion to autostart when i boot up the guest ubuntuserver ?
View 8 Replies
View Related
May 21, 2010
How do I get processes to run as root during startup? I have a random script and a package which both need to run as root in the background, but I can't find a way to do this automatically.
View 1 Replies
View Related
May 23, 2010
I have a java application that is in this path: java -jar /home/jbo10/.stuff/run.jar
If I type that command the gui comes up and it's ready to run. I want this program to autostart with ubuntu, so I went into gnome-session-properties and put that command in there.
But it's not starting. I'm not sure what I'm doing wrong or if there's another way to autostart programs?
View 5 Replies
View Related
May 29, 2010
how do i clear autostart? i've unchecked everything i don't need in "startup applications" but still after reboot i get everything running. i cleared ~./config/autostart but after reboot there appear all the default startup applicatons. What should i do?and is there a way to remove volume indicator from indicator menu?
View 2 Replies
View Related
