Quote:
Select a starter package from the table at the top of this page and download it to your development computer. To install the SDK, simply unpack the starter package to a safe location and then add the location to your PATH.How do I add a location to PATH?
I have added the smbd file location to the path of root. I can now execute it from any location. I noticed after reboot of the machine (RHEL 5) that this file location is no longer in the path. How do I make this permanent?
View 1 Replies View RelatedWhen I add some path in .bashrc by commenting out old path and adding new one like this:
#EXPORT HOME_PLAY=/home/gem/old_play
EXPORT HOME_PLAY=/home/gem/play
EXPORT PATH=$PATH:HOME_PLAY
After saving above changes, I enter the command: source ~/.bashrc Now if I do echo $PATH, the path shows both the old PLAY_HOME and new PLAY_HOME. This is really bad and messes up a lot of things in my project. This problem only goes away if I logout or reboot, a rather very long process. What is happening is that the old path is added to new path element and the old path includes the old path element you want to remove.
How do I permanently add a location to my $PATH so it is always there when I open terminal?
Also is there a GUI for this?
I installed Ubuntu 10.04 only be dismayed to find ${HOME}/bin FIRST IN THE PATH. I blogged about it at my blog (I sudo an xterm rather than just sudoing to get a different background for the sudo'd xterm): [url]
I agree that some new user should probably not be logging on as root. But if the replacement for 'ls' is in their ${HOME}/bin/ the sudo'd shell inherits the same PATH, umask, and everything else! In general I take a dim view of a sudo only way of doing things. It seems to cause more problems than it solves for disciplined, knowledgeable users. In the case of Ubuntu it caused me to create a /root folder for root to reset the umask back from 077 which is what I use over to 022 which is what root should use. The /root/.profile of course made sure there is no /home/me/bin in the sudo'd PATH. It didn't matter because somebody is not just SETTING the file perms and is instead calculating them based off of modifications to the umask. JUST SET THEM! I ran into a problem with GRUB getting things fouled up because I was having to remove the new kernels and instead of using the command line option (much prefereable) used Synaptic Manager instead: [url]
In fhe case of an infection living in a user's file space you really should want to go in to clean it out as some other user than the user that is infected. Having said that the hackers seem to be going for the whole enchilada right off the bat. A WARNING is in order here. DO NOT USE A ROOT ACCOUNT OR SUDO FOR NORMAL TASKS! But please put ${HOME}/bin last in the PATH or preferably don't even put it in the PATH at all. Let users add it themselves if they want it. Also once hackers figure out that hijacking a sudo tty (from what I just read else-where here I would say several hackers are working on doing that right now - sendmail my ****) is a dandy way of doing things you really will need to provide for ways of cleaning a user infestation out by going at it some other way than through that infected user. A lot of Ubuntu users have only one login account, the one they created when they set the machine up.
I'm trying to install Go (programming language):
[URL]
The installation was OK, but I can't find where the PATH variable is set for 10.10 netbook remix.
Code:
~$ echo $PATH
gives:
Code:
/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
How can I find the lynx location path on my server via SSH
View 2 Replies View RelatedI have a program that has a GUI which I have placed in /usr/local/bin however when I invoke the program I receive the following error:
Unable to find a supported JDK or JRE version. Version 1.3.1 or higher is required. Check your installation and use +javahome to specify the JDK or JRE location
I have since installed Java into the usr/local/ directory however I am now just totally Lost! Additionally, I believe that i have tried to install Java several times with no luck.
Questions:
1) Where should java be installed to have system wide access to all programs?
2) How can I place the Java location in my $PATH? here I am going to need very easy and detailed instructions?
3) Is there a way to ensure that the location where I intall java gets updates?
I just downloaded intel's fortran compiler, ifort. However, I seem to have to add it to path for every single terminal I open using:
Code:
source <install-dir>/bin/ifortvars.sh <arg>
I immediately think that there should be a way of doing this automatically at startup. However, this isnt just pointing to where ifort is, but running a shell script, which evidently only affects a single terminal session.
I have made the installation of Qt4 in my Fedora/MacBookPro. It also got a first compiling and running a simple program. The point is that for the compiler to run I need to point out every time where the bin is located, as that:
$ /home/threader/kinetic/bin/qmake -project
I have tried the following, but it still doesn't work:
# script
#-----------------------------------------------------------#
# /etc/bashrc or /home/threader/.bash_profile
# config to Qt compiler
[code]....
I've followed the guide here for installing MATLAB. The installation completed successfully, however, the launcher created doesn't launch MATLAB as MATLAB isn't installed anywhere pointed to by $PATH. What's the best way of solving this - adding MATLAB's directory to $PATH (in which case how do I go about doing so), or (re)installing MATLAB to somewhere already in $PATH?
View 2 Replies View RelatedI have openSUSE 11.3 Gnome installed. The nautilus address bar shows the "Button Bar" and if I press Ctrl+L it swaps to the "Text Location Bar". The Text Location bar is where you see the full path to the directory that you're viewing.But I can't set the default addressing to the Text Location Bar.What else should I do to get the text location bar (i.e. the full path) to be the default view in the address bar?
View 4 Replies View RelatedI've noticed that the root account $PATH does not include /usr/local/bin or /usr/local/sbin by default. Are there any potential issues that could arise from adding those directories to the path? If so, what is the best way to make sure your shell finds executables in those directories, without affecting the stability and security of the system?
View 2 Replies View RelatedI've installed rubygems on ubuntu, but it has a known issue that the rubygems' bin/ directory is not in the PATH. I know about exporting the PATH variable, and adding it to .bashrc, but I'd like to configure it so that every user has it on his PATH, even if he tries to run it with sudo. Where should I export the PATH variable then?
View 2 Replies View RelatedI found the following function in /etc/profile file.
[Code]...
1. I dont undestand what "if ! echo $PATH | /bin/grep -qE "(^|:)$1($|:)"" this if statement actually comapres??
2. Also what is the difference between PATH=$PATH:$1 & PATH=$1:$PATH
I'm working with a program that uses Open Motif to create all of the widgets, including the Open File dialog box (obviously). However, Open Motif being kinda old-timey, 80's vintage, and for the most part now an abandoned project, it is quite clunky. So, actually what I need to do is to open some files located on my work server. I have already successfully connected to the relevant server directories with Samba, and with programs built with GTK+ (such as GIMP) I can open files across the network because I have created a bookmark in Nautilus, and those bookmarks appear in the Open File dialog box created by GTK+. Now, Open Motif is different: it doesn't see network locations, orNautilus shortcuts. When I type "smb://serveripyadayada" in the search folder, it really doesn't like it and complains. So, what do I do? Can I get somehow Open Motif to open a network location? Or can I do a run-around and place a shortcut in the file system that points to the network location?
View 2 Replies View RelatedI have been testing ubuntu 10.10 maverick, it has some nice features. Anyway I am missing the possibility of writing manually the folder you want to go on nautilus using the Location bar. It was used to have some kind of icon which you can click and it switched between graphich breadcrumbs or the location of the folder and you could changed it manually, you know what I mean?
View 2 Replies View RelatedI use this command:
Code:
find ./ -atime +360
to figure out the files that haven't been accessed since 360 days. The command above will return results like this:
Code:
/uploads/2010/02/some-file-name.ext
/uploads/2009/08/another-file-name.ext
... etc
I'm taking here about tins of directories, thousands of files. I'm looking to find a command that makes me able to move the results above to another path, and to create that path once it doesn't exist like below:
Code:
mv /uploads/2010/02/some-file-name.ext /old-files/uploads/2010/02/some-file-name.ext
But I want the executed command to create this path
Code:
/old-files/uploads/2010/02/
If it doesn't exist.
Java applet not loading image with relative path(e.g. images/1.jpg) but loads image with absolute path(i.e. from /root/user/images/1.jpg) . This is a problem when i want to host the applet on web server
View 2 Replies View RelatedI have a program that takes a relative path as input appends it to a some path string to get the actual path.
Now all I can input is the relative path. So if I want to go one level above my input will be ../mypath.
If I know the depth of the path used internally, I can use .. as many times to go to the root directory and then give the absolute path. But suppose I do not know the depth of the directory, can I construct a relative path string such that it considers it as a relative path. One way could be to have enough .. in the path string so that I can force an absolute path for some maximum depth of path.
Is there some path string syntax that I am not aware of but can achieve this?
Experimenting with shell variables, accidentally deleted the path variable how could I return to the original path value. What kinds of problems will I have if I don't have a path variable.
View 3 Replies View Relatedhow to add a path to PATH variable permanently so that it remains persisent even after closing shell and rebooting the system when i added a path, to variable it remained there as long as i didn't closed the shell. but when i reopened it ,changed were undone.
View 2 Replies View RelatedI have a path c:windowsackup I need this string to be changed into /windows/back/up I used the command -bash-3.00$ echo windackup | sed 's/\//g' but the output is windbackup
View 7 Replies View RelatedCurrent script:-
prefix=user@my-server:
find . -depth -type d -name .git -printf '%h�' | while read -d "" path ; do (
cd "$path" || exit $?
[code]....
How shall i go about changing the absolute path to relative path, so that /home/git/mirror/android/adb/ndk.git gets converted to /mirror/android/adb/ndk.git //echo <command> "$prefix$PWD.git" ?? - anything for relative path?
i found that 10.04 hasn't edit location icon at location bar of nautilus. how to get it?
View 2 Replies View RelatedI am trying to figure out how i can add the path /usr/sbin/ into the $PATH variable. I want this to be used from the normal account. I am bored settinh this manualy each time my computer starts.
View 2 Replies View RelatedDoes anyone know how to get the path with a inode number by C programming?
Or can I get the absolute path without giving a "path" but a inode number by C?
like this: get_path(unsigned inode);
not such this function: getcwd(".", xxx);
taowuwen@gmail.com
running Windows 7 64bit with VMware Workstation 7.01-build 227600. I have some knowledge of Linux, I have installed f12 and have updated the system as of 03/22/2010. All updates completed successfully.
1) How do I install VMTools on the f12 (after mounting the CD/DVD tool package)
2) How do I update the gcc files it says are dependencies?
Here's what I get on installation:Before you can compile modules, you need to have the following installed...
make
gcc
kernel headers of the running kernel
and then I am prompted for this input from the install script:
Searching for GCC...
The path "" is not valid path to the gcc binary.
Would you like to change it? [yes]
and this is where I get stuck. How do I get around this or satisfy the requirements for the install?
kernel 2.6.21.5, slackware 12.0
GNU bash 3.1.17
Code:
As you can see, /usr/local/bin is in the path. However, bash does not look for nasm in /usr/local/bin.
If I am root, things go well:
Code:
me whereabouts in /home a private key that I've generated would be?I've just done a clean install of Lucid and want to import the keys from my backup of my Karmic home folder.
View 4 Replies View Related
