Ubuntu :: 11.04 Wireless Connection 802.11 Draft-N Not Available?
Jun 14, 2011
I have an Acer Aspire 2930Z notebook, and have a wireless network problem. When I installed Ubuntu 11.04 everything worked out of the box and I was extremely happy, but now that I have some other notebooks around I noticed that transferring files to the Acer Aspire 2930Z notebook did take a bit longer...
So after some digging I found out that the 2930Z only connects in the IEEE 802.11b/g range (max. 54mbit), while the specifications of Acer clearly specify that it also supports IEEE 802.11-Draft-N.
When I run MS Windows XP on the notebook I have no problem connecting at the Draft-N speed.When I run lspci -v | less I see. 06:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
The driver Ubuntu installs is clearly the correct one, so before I pull my hair what I'm I doing wrong?
View 8 Replies
ADVERTISEMENT
Jul 14, 2010
i was given a new DLink DWA-130 REV E draft N usb wireless adapter and was wondering if there are linux drivers for it?
View 2 Replies
View Related
Oct 30, 2010
I'm a newbie here and also a newbie with linux - got it for 3 or 4 days, got sick of W$ Vista (how could I put up working on Vista for about a year - I don't know...). Anyway - I'm using HP TX1300 with Broadcom 4321AG 802.11a/b/g/draft-n Wi-Fi Adapter, I managed to install drivers and stuff, and get the wireless network working. I had to shut down my computer and after reboot I cannot connect to wireless network. System "sees" the network, but cannot connect. I checked if the chosen security standards are matching those set on my router. (sorry if I made some mistakes in this post, i'm actually from Poland)
[edited] I noticed, that if after boot the wireless is named "eth1" (ethernet connection has name "eth0") then it works, but if it's loaded as "wlan0" then it cannot connect to the network. WLAN passkey is correct, as well as the security settings.
View 1 Replies
View Related
May 1, 2015
I was used to have a draft (fast, economic) printing mode under PCLinuxOS.
Printing and scanning works with my EPSON SX230 as well in Wheezy as in Jessie, but I am missing that mode.
Should be somewhere here .... [URL] .....
View 3 Replies
View Related
Mar 28, 2010
A friend who switched ISP's gave me his old Linksys WRT54-G wireless router. I went through the installation procedure and had a wireless connection up and running - smiley face. I had security set up for WPA, and decided to upgrade it to WPA2. Another smiley face. When I went to connect (had already done so successfully), I noticed it referred to my wireless as Linksys - I was expecting to see the SSID. So I started playing around in Network Manager and now I have things all effed up.
Don't know exactly what I did, but now I have no wireless. So I ran a few commands (lshw -C network, iwconfig, ifconfig, and iwlist scan), and looking at the results I see what appear to be inconsistencies in the output. I've posted them below, and make the following observations:
1. Under the lshw it refers to my wireless connection logical name as wmaster0, and has the correct MAC address, etc.
2. Under the iwconfig it says, 'wmaster0 no wireless extensions', but then refers to wlan0 as the wireless connection (although it does not seem to be running).
3. Under ifconfig I see both a wlan0 and a wlan0:avahi. The wlan0 has no IP, the wlan0:avahi does, but it is incorrect.
[Code]...
View 7 Replies
View Related
Jan 24, 2010
Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
View 5 Replies
View Related
Jun 11, 2011
My problem is exactly the same as [URL]
but I am stuck at the last hurdle
here are the output of the command that helped to solve the case in the previous post:
ifconfig wlan0
wlan0 Link encap:Ethernet HWaddr 00:1b:77:d2:59:55
inet6 addr: fe80::21b:77ff:fed2:5955/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[Code].....
I have also tried sudo dhclient but it hasn't helped and I am still unable to connect to the internet
View 1 Replies
View Related
Jan 13, 2010
I was running 9.10 in LiveCD mode and was unable to get online. Went to System>Administration>Hardware Drives and found "Broadcom STA wireless driver". Cool. So I went ahead and installed 9.10 (dual boot with Vista), repeated above steps but found no "Broadcom STA wireless driver" option, in fact no proprietary drivers. So I still cannot connect to the Internet, and I don't know where to go from here. (Note: I installed 9.10 side by side with Vista: good? bad?)
[Code]...
View 9 Replies
View Related
Nov 12, 2009
Each time I start up debian -lenny, the network-manager does not automatically connect me to my wireless network. The connection list shows a lot of networks available, but mine is always absent from the list. This means I each time have to go to "Connect to other Wireless Network" in and write in my network name (SSID) and password (PWA2 Personal). Then is connects nicely and everything works fine until next time I boot
View 5 Replies
View Related
Jun 25, 2010
I would like to have all traffic from the ethernet connection out through the wireless (basically using the box as a router) however I am having some trouble doing this.
I have done this before on Windows however I am having some trouble doing this on linux, I have tried using Squid Proxy however I am having some trouble using configuring/using it.
I am using Yellow Dog Linux however I am willing to change to any other distro as long as it is compatable with PS3 (as this is what im using linux on)
View 14 Replies
View Related
Jun 21, 2009
I have installed Fedora 11 recently. I want to share my Internet connection.
I have e LAN connection eth0 which is connected to internet.
I have a Wireless connection wlan0.
I want to share my internet connection with wireless connection.
View 3 Replies
View Related
Feb 4, 2010
I have two linux laptops. Currently, I'm using both of them at work, side-by-side. Now the problem is, I'm connected to a wireless router, but the wireless only works on one of the laptops. So I'm stuck with one laptop that has no access to the internet. Both machines do, however, have working ethernet nic cards. So, I was wondering if I could use the laptop with the wireless connection to share the internet connection with my other linux machine and access the internet on both of them. Or as an alternative, just use the internet on the machine without wireless and be able to switch back and forth, that would increase my productivity like 30 fold.
View 5 Replies
View Related
Apr 30, 2010
I'm trying to set up a wireless connection to my personal wireless net. I have a Linksys N router and I am using a WMN 300n adapter. I found out how to get the connection manager but I'm not sure if i ams upposed to enter the MAC of the router and I know what the SSID is but the B**ssid(not quite sure what that was and I'm on a Win7 system right now)so any info to get my wireless connection now
View 5 Replies
View Related
Aug 5, 2010
I am getting trouble with knetwork manager. I created a new connection by scanning and connecting using knetwork manager. But every time connection gets disconnected and ask for password and again it connects.
View 8 Replies
View Related
Dec 21, 2010
I am running FC13 on a Compaq Presario 2100 using a Broadcom BCM4306. I was able to get it running thanks to Fedora Unity Project. But It's a very unstable connection. I don't know what settings to adjust or enable or disable. It's not my router, this is the only wireless connection in the house that I have trouble with.
View 1 Replies
View Related
Feb 2, 2011
I have searched and have not found anything specific to my issue. I am currently using NDISWrapper to load the bcmwl15 driver and when it's active it works beautifully.Problem is sometimes at boot, the card doesn't "turn on" and I don't know how else to describe it. The OS does not even detect that the hardware is present. I have disabled wireless hotkey in BIOS. The only way to make the wireless card "active" is to reboot with the wiredconnection to the router. After doing that the wireless card "wakes up" and works awesome.Is there anything I can do to make sure the driver load at boot?mes I get the error that NDISWrapper is not modprobbed when I go to network configuration and if I wish to do i now? I don't know if that has anything to do with the boot sequence. Using the <modprobe ndiswrapper> command as root does nothing permanant
View 9 Replies
View Related
Apr 23, 2011
I own an ASUS N61JV-X2 notebook PC. It has an Atheros Communication, Inc. AR9285 Wireless Network Adapter. 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 0280: 168c:002b (rev 01) I cannot see any SSIDs including my home Verizon FiOS 802.11 G WPA2-AES-TKIP encrypted network. I went to Starbucks to try to connect to their free Wi-Fi and I could not make a connection. How do I solve this problem so that I can connect to a SSID of my choice and make a wireless connection while using GNOME 3?
View 2 Replies
View Related
Apr 27, 2010
I recently bought a D-Link DIR-655 router capable of 802.11n operation, upgrading from a DIR-624 router only capable of 802.11g operation. While my overall setup uses wired connections, other people in the house prefer wireless, and the upgrade was undertaken more for a hoped for increase in wireless range, rather than the possibility of increased speed, since the router is located to accommodate the wired connections. However, to test the 802.11n operation I bought a D-Link DWA-130 USB dongle for my now 5-year old laptop, which comes with an otherwise satisfactory 100Mbs ethernet port(eth1) and an 802.11g wireless card(eth0). By checking the dmesg | grep firmware output after I plugged in the dongle I determined that the necessary firmware was rtl8192sfw.bin, which I found on the web, and downloaded into the directory /lib/RTL8192SU.
A subsequent reboot and then YaST > Network Devices > Network Settings showed the device as wlan0, but not configured. I changed the Network Setup Method to ifup (since I can see no way to do a device configuration in Network Manager), and configured the device, and at the same time deleted the configuration for the existing 802.11g wireless card(eth0). I then rebooted, went back into YaST to confirm the wlan0 device was configured and the 802.11g device (eth0) was not, changed the Network Setup Method back to Network Manager, rebooted again. Making sure that the router was set to only transmit/receive using 802.11n I then typed iwlist scan. To my surprise, the output showed first that the supposedly unconfigured eth0 device seemed to be still active, for it found my home network, and claimed that the protocol used was 802.11g. On the other hand, the newly configured wlan0 device produced the message: "Interface doesn't support scanning: Network is down".
First, should I expect iwlist scan to work for a device that shows as unconfigured? And even if it should work, shouldn't it show 802.11n as the protocol, assuming that the router is in fact telling the truth? Is there any independent means to determine if the router is only using 802.11n as it claims? Second, the overall goal is to make the wireless network in the house 802,11n only, and since the dongle is backward compatible with 802.11g, I would expect to permanently unconfigure the eth0 device and use the dongle, both here and on the road. I do not need two wireless connections on my laptopThe laptop is running SuSE 11.2 as of about a month ago. Some relevant(I hope) command line output:siracusa:~ # uname -aLinux siracusa 2.6.31.12-0.2-desktop #1 SMP PREEMPT 2010-03-16 21:25:39 +0100 i686 i686 i386 GNU/LinuxUSB Information
siracusa:~ # lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 2001:3301 D-Link Corp. [hex]
[code]....
View 9 Replies
View Related
Sep 13, 2010
I just started using OpenSUSE on an old laptop. It seems that I have my graphical problems at least temporarily solved, but I continued to lose my wireless connection after an hour of use. This is an old and well supported chipset (RT2500) and I had never had any issues with it before. I use WPA security, and one kind poster suggested I had a line for using the old "wext" driver in the /etc/sysconfig/ifcfg-wlan0 file, and that seems to have sorted it since I have not had any further issues since doing that edit. I eventually found the information on my own:
# Note: This option requires a wpa driver supporting it, like
# the 'nl80211' driver used by default since openSUSE 11.3.
# When you notice problems with your hardware, please file a
[code]....
View 9 Replies
View Related
Nov 15, 2010
There seem to be a number of people that believe the junk that NetworkManager is buggy.As I believe the opposite, I want to offer more detailed instructions on how to create the initial connection, and how to troubleshoot the process. Once readers of this group have commented on this draft, I plan to ask the moderators to make it a sticky.
This description will be specific to the KDE desktop. The steps will be similar for Gnome, but the details may be different.
Step 1: Do you have a Network Manager applet in the system tray? If not, use YaST =>
Network Devices => Network Settings. Under the "Global Options" tab, click on the "User Controlled with Network Manager" button. If it is already set, you will get a warning box when "Network Settings" starts.
Step 2: Now you should see the NM applet. Click on it and check the popup. If the "Enable Wireless" checkbox is inactive (gray), there are several possibilities: (1) Your wireless device driver is not loaded, (2) the necessary firmware is not available, or (3) an rfkill switch/button is wrong. For (1), check "hwinfo --network" and check the "Driver" line. If it is blank, then you need to run the command "/sbin/lspci -nn" if the device is connected to a PCI bus, or "lsusb" if a USB device. Post the results on the Wireless forum. For (2), look at the output of "dmesg | grep firmware", which will list the name of the file(s) to be loaded.
For Broadcom devices that use either b43 or b43legacy, the firmware is obtained by using the command "/usr/sbin/install_b43xx_firmware". You will need a wired connection to complete this step. For (3), you will also need a wired connection and install the
"rfkill" package using the command "sudo zypper in rfkill". The interrogate the current settings with "/usr/sbin/rfkill list". If any device is "Hard blocked", then wireless will be disabled.
Step 3: Once the "Enable Wireless" checkbox is active, check it and click on "Manage
Connections". Choose the Wireless tab and click on Add. Enter the name for this connection. You will probably want to check the "Connect Automatically" box. Next click on the Scan button. If you do not see your Access Point (AP) in the map, you will not be able to get a connection. Click on the AP you want, and click OK. The (E)SSID should be in the SSID box. The other boxes on this screen should be OK as is. If you have several APs with the same SSID, but you wish to restrict the connection to only one of them, then you should enter its MAC address in the BSSID box.
This usage is rare. Next click on the "Wireless Security" tab and enter any encryption secrets. The correct type should have been selected. For WEP encryption, you will need to use the hex key, not a passphrase. Once this is complete, click OK to close this screen, and the configure screen. During this process, a popup should appear offering to use a
wallet to store the connection secret. If you use a password on this wallet, you will need to enter that password each time you log in. If you set no password on the wallet, the security level is lowered, but entering a password is avoided.
Step 4: At this point, you will need to disconnect the wire. Whenever the computer can make a hard-wired connection, it will supersede any wireless option. The wireless connection should then occur automatically.
View 1 Replies
View Related
Apr 7, 2011
I set up 11.4 in my laptopnd, after updating and downloading the proper firmwareeverytihing runs great. I already configured the wireless network via the standard NetworkManager but the connection never starts automatically. When I boot up it reports all the wireless connections available and also let me connect to hidden networks (mine is not broadcasting so I have to use this option). I had to reconfigure my network options the first time I selected Hidden Networks but it connects fine. Please note I had already selected the "Automatic connection" optionSo the only question is how I configure my equipment so it connects automatically to the already configured network
View 3 Replies
View Related
May 6, 2011
I've been having problems with connecting to my router with my wireless card. Sometimes knetworkmanager attempts to the connect to my wireless via it's saved profile but it just stays on "Activating" for about 45 seconds then just stops. This only started happening a few days ago, so maybe the new kernel update has something to do with it?
I've tried to debugging the problem myself and have found if I reboot my router knetworkmanager can connect immediately to the wireless router, but also something interesting I found was is I assigned a IP Address and DNS manually on the saved profile it would connect with no problem (No reboot of router required), so it is indicating there is a problem with getting network settings. I've confirmed that the wireless card is not hard or soft blocked through rfkill.
I was using the box standard ath5k driver when this problem started happening and even went as far as a complete reinstall but ironically enough on first boot from a fresh install my wireless could not connect with the problem described above. I've since moved to the compat-wireless drivers but the problem remains.
I checked a couple of logs, one log file of significance was the wpa_suppliment log which was full of these messages: From all my debugging I can only assume that the kernel update is a possible cause for all of this as the problem occurring on first boot of a fresh install sounds like a general bug. I've got all of the requested information about my wireless card below, hope I've got everything:
[Code]....
View 2 Replies
View Related
Jun 3, 2010
Some info below:
- notebook Fuijtsu Siemens AMILO Pro2065 - 4 gb ram - 80 gb hd - wireless on board Intel PRO/Wireless 2200BG
- wireless works properly with Ubuntu (with WEP key)
I'm just installed OpenSuse 11.2 and:
- wireless found my AP
- i've just inserted WEP key / 64 bit Hex-Ascii and..not working!
View 1 Replies
View Related
Jan 9, 2011
I am running Ubuntu 10.10, and I would like to use my computer to share the internet connection from an ethernet port. For example, I would like to set up my computer as a wireless access point so I can create a network that other computers can connect to for internet.
View 3 Replies
View Related
Feb 26, 2010
I'm able to configure my Wireless network to connect with an AP with WEP key but...
Now I'm at home, I've a WPA2 key (my router now is supporting both, WPA and WPA2). I used WICD to connect but no success at all! It just stops with "Connection failed: Could not contact the wireless access point"
if I type IWLIST key:
Code:
ra0 2 key sizes: 40, 104bits
4 keys available
[1]: off
[2]: off
[3]: off
[4]: off
code....
View 15 Replies
View Related
Jan 14, 2010
im having a problem with my wireless connection... This problem became apparant about 5 months ago when i was using Ubuntu 9.04, when i shut the computer down, it would take my wireless with it, so that when i started it up again, the wireless light was off. I fixed this by logging into Windows, flicking the wireless switch and choosing to turn wifi back on.
When i installed 9.10 the problem was apparantly gone, so i removed Windows as it was all i needed it for. Last night i did an update and shut it down, the problem is that now, when i started it up, the wifi light is off again, and this time i dont have Windows to boot into to fix it...
View 2 Replies
View Related
Jun 22, 2010
I have installed the latest version of Ubuntu on my LG X130 Netbook - all seems well except that I have no WiFi connection. I have read through some of the forum posts on this topic but am really none the wiser I have also tried to use the Ubuntu Help and find that I come unstuck on the first step -
1. type the command: sudo lshw -C network You should see an output, along with the words "CLAIMED, UNCLAIMED, ENABLED or DISABLED"
I get the output below but as you can see none of the "words" are included:
jimbr@ubuntu:~$ sudo lshw -C network
*-network
description: Ethernet interface
product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
[Code].....
View 4 Replies
View Related
Jul 26, 2010
i have u-verse and there modem is wireless. i have a wireless usb adapter that works with my xp but not my 10.04. i plug it in and it doesn't detect anything.
View 7 Replies
View Related
Aug 20, 2010
I have an hp G60-445dx notebook pc laptop. Ubuntu 9.10 the wireless was working just beautifully, with an ESSID hidden just fine. I changed the router to use WEP security.. and for the life of me I can't get it to work.
I have tried network manager, and wicd, and iwconfig commands manually, and setting wlan0 in /etc/network/intefaces. (none of the above approaches have worked) wicd is sort of the most promising. It wants to connect but can't get the IP address. I tried static ip, and putting in my Internet provider but still no luck. I know the wireless router is up, as other computers in house are using wireless. It could be that my wireless button is broken and won't go on?? but it was working.
My lspci - arthros ar5001
my ifconfig shows wlan0
my iwconfig shows wlan0
Would I be better off getting the usb d-link wireless? Can someone point me in the right direction?
View 4 Replies
View Related
Oct 26, 2010
I've just done a new install of Ubuntu 10.04 on my laptop, and cannot get a wireless connection. The same thing happened when I first installed it in August, and it was sorted. I've found the thread from back then, and have just done the final stages that got it working last time:
"Insert the CD, and go to pool > main > f > fakeroot and double click on the fakeroot package to install.
Then go to pool > main > p > patch and double click that package to install.
Last go to pool > restricted > b > bcmwl and double click that to install.
Then do
Code:
sudo modprobe wl
And you should be up and running."
However, this time, it's telling me "Module wl not found".
View 5 Replies
View Related
