Can't configure out how to configure itQuote:
Jun 01 23:18:15.605 [Notice] Tor v0.2.1.26. This is experimental software. Do not rely on it for strong anonymity. (Running on Linux i686)
Jun 01 23:18:15.605 [Notice] Initialized libevent version 1.4.13-stable using method epoll. Good.
[code]....
I just recently installed Tor again on my new Natty install along with Vidalia. It was working initially, but for some reason it has ceased to function within the last 24 hours. When I start Tor (either from the command-line or Vidalia) and go to check.torproject.org, it says that Tor isn't running. (I don't use Torbutton with Firefox, if that makes any difference. I use FoxyProxy, but the settings look fine to me. It was working only yesterday.) I've checked the config files for Polipo and Tor, and I've checked my Vidalia settings more times than I can count. It all looks perfectly satisfactory.
I'm sure that it's not my firewall, Tor/Polipo configurations, or Vidalia settings. When I launch Tor with Vidalia and check the logs, everything works just fine and it says I'm connected. The only thing I can think of is that it might be a FoxyProxy issue or a problem with check.torproject.org, but the settings for FoxyProxy look okay and check.torproject.org hasn't malfunctioned in the past.
I've purged and reinstalled Tor, Vidalia, and Polipo and restored their config files and settings to the defaults, but still to no avail. My current malfunctioning Tor configuration is identical to my old and functional one, so far as I can tell.
I recently installed ubuntu 11.04(64-bit) and have been using it for a little less than a week now(absolutely love it). I've been trying to install all the basic programs I need, and up until now, with no problem.
I've had trouble getting vidalia to work properly. Whenever I start vidalia, both the tor and vidalia processes show up. The GUI for vidalia does not. A temporary solution I found was to login as root and run it like that, but I take it that isn't the greatest idea.
I've reinstalled multiple times, both from source, building deb packages, and the tor repository.
I just finished installing and configuring 'TOR' to work in conjunction with 'Polipo' and then I realized I forgot to install it Vidalia. Am I still able to install vidalia so I am able to access the GUI to get a visual on what is going on? Or will it interfere with the TOR/Polipo team?
View 2 Replies View RelatedI want to use Vidalia to manage a TOR relay. My /etc/default/tor file references another file /etc/default/tor.vidalia. It's supposed to help manage the TOR daemon. For whatever reason, I don't have a file called /etc/default/tor.vidalia.
View 8 Replies View RelatedI just installed TOR but get an error that it has ended unexpectedly when I open Vidalia. The log has the following:
Oct 17 18:42:09.770 [Notice] Tor v0.2.2.17-alpha (git-d30d4eb843f12e65). This is experimental software. Do not rely on it for strong anonymity. (Running on Linux i686)
Oct 17 18:42:09.771 [Notice] Initialized libevent version 1.4.13-stable using method epoll. Good.
Oct 17 18:42:09.771 [Notice] Opening Socks listener on 127.0.0.1:9050
Oct 17 18:42:09.771 [Warning] Could not bind to 127.0.0.1:9050: Address already in use. Is Tor already running?
Oct 17 18:42:09.771 [Warning] Failed to parse/validate config: Failed to bind one of the listener ports.
Oct 17 18:42:09.771 [Error] Reading config failed--see warnings above.
I'm running Ubuntu 10.10.
I've downloaded Vidalia, but instead of No Configuration, I chose One-Time Restart, and now whenever I try to open TOR, it says that it is already running. I've rebooted already, but that didn't help at all. I would like to start using TOR as an experiment and to remain anonymous. Sure, there's HideMyAss! add-on for Google Chrome, but I just want to try it all out. Can someone help me?
This is what it says
"Vidalia detected that the Tor software exited unexpectedly.
Please check the message log for recent warning or error messages." code...
Everytime I shutdown/restart my computer without properly turning off the Tor network and get the following message from Vidalia:
"Vidalia detected that the Tor software exited unexpectedly"
The only way I can get Vidalia to work again is to reinstall Vidalia.
Vidalia control panel has no check box for "show this window on startup". Is there a way using linux commands to stop it from popping up or would I need to change something else?
View 2 Replies View RelatedQuote:
Ubuntu: 9.10
internet browser: Chromium
tor tool: Vidalia 0.2.6
I can see that Vidalia is working fine. It shows the status
Quote:
Connected to the Tor network!
how to let my browser Chromium bypass the blocks and reach some websites using "tor" based on Vidalia?
When originally installing 11.04 I had problems getting my Ralink 5390 wireless card to work.
Today my computer froze completely and I had to turn it off via the power switch. When I turned it back on, wireless was no longer recognized! My iPod can connect to the network just fine, so it must be an Ubuntu problem. There are no problems with my ethernet connection either.
I researched this and found several threads about blocking and unblocking wireless devices using the rfkill command. Well, unfortunately for me the rfkill command doesn't work. When I type sudo rfkill list or sudo rfkill unblock all, nothing happens; it just returns me to my bash prompt. I even tried uninstalling and reinstalling rfkill...nothing.
I have been looking around the forums searching for similar problems, it seems not only me had this problem. About a month ago I did a regular update via Upd Manager. The next day - no wired connection.Still managable, since the local library has wireless. Now that won't work either.Just after I upgraded from Jaunty, I accidentally removed NetwMngr from the top right corner of the screen, but that should not have anything to do with how the program works, right? I now cannot reach NM, if I run it from the terminal, nothing happens visibly.
View 5 Replies View RelatedI installed it on a Dell Inspiron 531 with the GeForce 6150SE nForce 430 built in video card. From the recommend driver list I installed �NVIDIA accelerated graphics driver (version current) [Recommended
Well, turns out it should not have been recommended. I had restarted and all I got was a low res ubuntu logo and a boot right into a full screen terminal. Tried startx and got a no screens found, I look online for about an hour last night and decided to just reinstall, which takes a couple hours when installing all the packages.
I have done more research today and found to install the latest linux x64 driver from nVidias website, which I did, but it does not run. I followed some more instructions and it said to do a �sudo chmod +x <file>� which I did, and it starts to open and I get �You appear to be running an X server; please exit X before installing.�
I�m starting to get a little frustrated here, guess I�m just used to a lot of the ease of windows and assumed that something like installing a graphics card driver would be easy.
I have a Dell Latitude D530 Laptop (500 GB HDD). Installed Windows XP and then Ubuntu 10.10 to do dual boot. everything works fine in Windows XP.In Ubuntu 10.10 I had issues connecting to Internet(Through Wirelss), I was able to rectify this issue by dsiable ipv6 from firefox about:config and setting true to network.dns.disableIPv6. After this I was able to connect to internet and browse websites from Firefox.But I am having Issues with Evolution Mail(Connection Timed Out) and Google Talk Client(Connection Timed Out).Empathy Internet Messaging gets connected fine.I was wondering if I will have to disable IPv6 System wide and hence I added the following lines to /etc/sysctl.conf
#disable ipv6
net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.default.disable_ipv6 = 1
[code]....
I had an Ubuntu Server 32 bit installation and everything was working fine. Now that I installed Ubuntu Server 64bit on a new drive in the same machine, the ethernet card is not working!! This is insane cause when I put the hard disk with the 32bit installation back and booting from it, the ethernet card is working without any problems but in the 64bits installation it is not shown at all using "ifconfig -a"
lspci output:
Quote:
02:00.0 Ethernet controller: Atheros Communications AR8151 v1.0 Gigabit Ethernet (rev c0)
How can I check which module is being loaded in the 32bits installation to try to load it manually in the 64 bits installation?
I just installed the lamp stack and so far my default site is working. But a 2nd site I made is not working.I created the config file in /etc/apache2/sites-availableit reads:Quote:
<VirtualHost myip:80>
ServerAdmin webmaster@mydomain.com
ServerName mydomain.com
[code]....
I have very interesting problem after ~10 PHP Fatal error, php 5(latest one) in apache2(latest one) in Ubuntu Server 10.10(with latest updates) just do not work. So if try any php page it's not working(user see white page), but HTML still work fine.What that can be? So only restart apache is help to back php. (we are running Wordpress blog 3.1)
View 2 Replies View RelatedI had a problem with apache2 and getting .htaccess working. I have done some things and i believe its working the ErrorDocument command is anyway. I believe there may be some problems with the rewrites though.Im trying to take a urlhttp://localhost/showthread/123and make it display whats on http://localhost/index.php?showthread=123The rewrite rule is Quote:
Options +FollowSymLinks
RewriteEngine on
RewriteRule ^showthread/([^/.]+)/?$ index.php?showthread=$1 [L]
[code]....
.m4a files not working in banshee but working in rhythmbox.
View 1 Replies View RelatedI can connect to the internet with wired connection. The switch for the device is on but this command "sudo lshw -C network" has the following results:
#
[sudo] password for nn:
*-network
description: Network controller
product: BCM4312 802.11a/b/g
[Code]....
I upgraded Samba to 3.5.2 to enable Windows 7 to log in to the PDC. ACL was working with the Samba 3.0.28a that came with 8.04LTS. After upgrade I can now log in to the domain with Win 7 but ACL permissions are not working on Win7, XP or anything. They still show on the server but any attempt to change permissions on the workstation fails with "Access is Denied" and only user/group/other permissions are doing anything. Anyone know what changes for the ACL were made between the two versions? I know they're working on switching to VFS modules but setting "vfs objects = acl_xattr"
View 1 Replies View RelatedOK so I set up a server yesterday and got ndiswrapper loaded on it with the appropriate driver, I edited the /etc/network/interfaces file to contact my router with it's MAC address, WEP Key, etc... So the problem is I can ping addresses like Google and Ubuntu Forums but I can't use apt-get to install or update packages. When I try sudo apt-get update I get a whole bunch of Code: W: Failed to fetch <address>Temporary Failure resolving <address>My Wireless interface is wlan0 and also I can ping my server from my other computer running Linux and my server can ping that computer too.
View 1 Replies View RelatedI have a strange problem for internet. My clients (winxp - S2) can't get internet.Let me explain my scenerios. Fedora 10 with lan (eth0) having direct internet from dsl model, client (XP service pack 2) can use samba shares using dhcp (wlan0) installed in Fedora 10 box. client can ping my linux box.Now problem is: client (dosbox) can ping the google ip address (i.e ping 74.125.39.106) but can't use 'ping www.google.com'. That means ping with ip works for internet from my client. My linux box can. I can use internet from FC10 but can't use iexplorer from my client to have internet. I have enable ipmasquarding in Firewall and dhcpd is running on wlan0 for dynamic ip address of my clients.Can someone suggest me what kind of problem having I? What should i do to success iexplorer for internet? what possibly am i missing?
View 3 Replies View RelatedI followed the sticky about setting up wireless and I have come to an issue where the WLAN switch which is on this computer can be pressed, the light comes on, but no WLAN. When I looked in dmesg, this is what I get:
ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
firmware: requesting ipw2100-1.3.fw
eth0: Radio is disabled by RF switch.
When running iwconfig wlan0 heres what I get:
home/j-dub # iwconfig eth0
wlan0 unassociated ESSID off/any Nickname:"ipw2100"
Mode:Managed Channel=0 Access Point: Not-Associated
[code]....
Notice it says that the 'Radio is disabled by switch' in dmesg. I can press that switch until the end of the world comes and it does absolutely nothing but make the WLAN light put on a light show. And it shows the wlan to be unassociated with any clients. So, what are my options to get this Wireless up and working?
Computer/OS info:
Fujitsu-Siemens Amilo M7400
1.4GHz Intel Centrino R
40GB HD
Suse 11.1 KDE
I use an internet connection with a proxy. I have set the proxy in Firefox and systemsettings so now I can browse the web and I can ping Google from Console. But when I start Software Management, it says "Cannot access installation media". Whats wrong?
View 3 Replies View RelatedI have been a long time Windows user and just recently switched to Ubuntu. At first it looked like everything was going great ... now I just seem to have lots of problems with stuff not working right or not working at all, there are lots of issues but first tings first. I can't seem to get any program to copy or burn any dvds or cds. I understand that you need certain codecs and css stuff which are already installed.
View 5 Replies View RelatedI have an asus 1215b laptop. For some reason, when I plug my mouse into any of the USB 2.0 ports it doesnt work. However, these same ports work perfectly to coppy files onto pendrives or external hdd. However, the USB 3.0 works perfectly for everything. The last thing I expected was the newer 3.0 to work and not the older 2.0. btw, my mouse is a generic, brandless laser mouse (it is an inhouse brand of PC CITY stores: PC LINE). I have never had any problems with it before.
View 1 Replies View RelatedI recently moved into my room-mates house and her wireless was not secure as I was able to log on to it unsecured with my Fedora 12 Laptop. After Securing it with WPA all the windows computers had no problem getting back on to the now secure wireless. Using GNOME I went to SYSTEM then PREFERENCES and NETWORK CONNECTIONS and clicked on the wireless tab and configured wireless security tab and configured for WPA WPA2 Personal. No problems. But when I go to the gnome tool bar and click on the network and see our SSID it wants to use WEP 40bit and others methods but has no selection for WPA.
View 10 Replies View RelatedI have Slackware 13.1 with kernel 2.6.37. Everything is working fine, except that I can't mount any CD/DVD and automount is not working either. If I connect any USb to my laptop it doesn't automount, I need to manually mount it. The same case happens with CD/DVD only that I can't mount any CD/DVD even manually. Here's the output:
Code:
bash-4.1# mount /dev/cdrom /mnt/cdrom
mount: block device /dev/sr0 is write-protected, mounting read-only
[code]...
I'm running Ubuntu 10.10 Maverick Meerkat 64-bit on my desktop with a wired internet connection (with no firewall). For the past 2 days, I have observed that1. Firefox randomly throws up errors like "Problem loading page" whenever I click on a hyperlink. When I click on Reload, the page loads up just fine. This has been happening a lot recently..and I do not remember updating anything consciously. By the way, ipv6 is disabled in Firefox.2. The network stops working all of a sudden (usually indicated by the Firefox error). The Autho Eth0 indication is active, but I am unable to connect to any external machine.
3. Needless to say, this error is manifesting itself in apt-get as well. I get "something wicked happened" errors all the time, and am unable to download or install anything.That this is not a problem with the ISP is obvious because I also have Windows (from which I'm typing this, ironically), which is able to access the internet.Is this a bug in Ubuntu 10.10?