I have configured apache using mod_jk to front tomcat. Then I configured tomcat and my application to use https. but after that I cannot access it through https without adding port 8080 in the URL. I think I need to add some configurations to apache to cope with this situation, but I still couldn't find the proper config though I tried many.
View 4 RepliesI have tried to configure my iptables to allow only HTTPS connections to the internet. Unfortunately, I didn't get that to work. I configured it like this:
Quote:
iptables -P INPUT DROP
iptables -P OUTPUT DROP
iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
iptables -A OUTPUT -t filter -p tcp --dport 53 -j ACCEPT
iptables -A OUTPUT -t filter -p udp --dport 53 -j ACCEPT
[Code]....
Of course I am only trying to access websites via HTTPS Still, I was wondering if HTTPS somehow under the hood requires the HTTP port to be open or if my rules are in some other way wrong.
ps: I got the rules from that website: [URL]
I've noticed that when I open firefox I get really strange HTTP and HTTPS connections showing up in firestarter (which as I understand it is just a GUI for IPtables). They connect to various bits of a site listed as 1e100.net (when you use "lookup hostnames") such as wy-in-f18.1e100.net, they stay connected all the time as far as I can see unless I close firefox. I've heard people say they are connected to Google, but I can close all tabs after loging out of google and still see them... it's very odd.
View 3 Replies View Relatedi have changed the permissions of tomcat folder stiill firstly,i did this
[whacko@localhost local]$ /usr/local/tomcat/bin/startup.sh
Using CATALINA_BASE: /usr/local/tomcat
Using CATALINA_HOME: /usr/local/tomcat
[code]...
I am trying to set up an Apache frontend server followed by a Tomcat server. Tomcat needs to run as an https service. I will have two services, both accessible independently, if desired.This login module is a webapp, running inside Tomcat.
Question:
Do I configure the Tomcat on port 8443 (I want to run it as a non-root) and do nothing with Apache or do I run on the standard port 8080 and configure Apache?
If Tomcat, is it server.xml? (connector?)
If Apache, is it httpd.conf?
I was wondering if it is possible to have different certificates for different directories in a https-directory ?So what I want is that for a specificry a specific TLS-certificate is needed by the http-client to be authorized to the directory.Directory /var/www/html/secure/1 needs a certificate A.Directory /var/www/html/secure/2 need a different certificate B.So I have 1 CA, which signs the other certificates of the specific directory. The http-client gets the certificate A or certificate B (to be authenticated for secure/1 of secure/2)
View 5 Replies View RelatedI want to setup tomcat and apache to run on SSL. I did set up apache to run with ssl and tomcat (wo ssl). Tomcat is on 8081 and apache is on standard HTTP/HTTPS ports. Now I installed JK module and I want to access "host-manager" application on tomcat with ssl, but when I try https://localhost/host-manager/ I get 503 error and when I try [URL]. I get 404 error. Here's my /etc/apache2/sites-available/default conf:
Code:
<VirtualHost *:80>
ServerAdmin webmaster@localhost
DocumentRoot /var/www
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
<Directory /var/www/>
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
allow from all
</Directory> .....
Here is /etc/apache2/mods-enabled/jk.load:
Code:
LoadModule jk_module /usr/lib/apache2/modules/mod_jk.so
JkWorkersFile /etc/apache2/workers.properties
JkLogFile /var/log/apache2/mod_jk.log
JkLogLevel info
JkLogStampFormat "[%a %b %d %H:%M:%S %Y] "
JkOptions +ForwardKeySize +ForwardURICompat -ForwardDirectories
JkRequestLogFormat "%w %V %T"
and here is workers.properties:
Code:
worker.list=worker1
worker.testWorker.port=8009
worker.testWorker.host=localhost
worker.testWorker.type=ajp13
I have a Apache web server and a separate tomcat 5 server. I can run the jsp-exaples just fine using HTTP. However using HTTPS fails. For some reason it appears HTTPS is not forwarding to the connector, I get 404 not found, returned.If I simply try https://apache_server_ip I successfully connect to the default Apache page.According to this page it should just work. Apache should do the ssl encryption/decryption and tomcat operate as normal.
View 1 Replies View RelatedAnyone who can help me with good tutorials to learn Apache tomcat Administration? any ebook or material?
View 1 Replies View RelatedI succesfully extract it and run it. This code is shown
Problems: [url]
I have used same Hardware and OS platfrom for web server benchmarking and i have used similar php and jsp scripts for Apache and Tomcat. For this testing i have used apache ab benchmarking toolFrom this statistics i would like to clarify the performances about Apache and Tomcat.
1. why Tomcat have taken too much of time to finish this 10 million requests to compare with Apache?
2. why this huge different for "Request per Second"?
3. To Tomcat i have increased multi thread level 300 and JVM memory usage upto 2048mb(but performances not increased), rather than these, is there any other performance tune-up settings for Tomcat?
4. from these statistics, can i come to the conclusion that apache is the best?
5.do u feel that ab tool favouring to Apache?
I'm configuring a web server using Apache and Tomcat. I use Apache 2 and various instances of Tomcat5 and Tomcat6..I try that Apache serves the static data and tomcat the dynamic (Apache receives all requests, sending tomcat only the dynamic)I see that Apache and Tomcat can be connected using http or ajp Can any tell me:
- What connector should I use: ajp, http,...?
- How can I say Apache to serve the static data and Tomcat the dynamic?Due to I have many instances of Tomcat, connectins http and https, https with client certificates, and due to the port configuration:
- Is there any way to configure Apache-tomcat without the use of ports in tomcat (a differect connector)?
I need to install apache tomcat on centos 5.3...How can i do it
View 4 Replies View Relatedwe have configured snv in our server but when we tried to access our svn folder from client its saying path not found error.This is because apache is mapped to tomcat so when we tried to access svn by default it looks to some other path and displaying path not found error.My question is how to restrict apache from forwarding its request to tomcat or else how to stop the tomcat service. I am using centos and i tried with /etc/init.d/tomcat5 stop but it is not getting stopped.
View 3 Replies View RelatedI installed the Tomcat5.5, but when i test the port 8080 didn't work, where i can edit to work it properly? and then help me how to setup apache to tomcat? specific command, directory where i can edit and configure the scripts? and where i can put the web application file?
View 1 Replies View RelatedFor some of the files that I share using Apache, I want to make sure that they are served ONLY via https.
How can I configure this for Apache?
I am trying to get name based virtual hosts all running on HTTPS (port 443) so I can run multiple sites on the one IP.
The DocumentRoot needs to be different for each host.
[URL]
However, I am unable to find where to actually enable these hosts in the configs. The apache website says to put it in httpd.conf however that file is empty on my machine.
The existing default virtual hosts are in "/etc/apache2/sites-available/default" and "default-ssl"
The main config file is /etc/apache2/apache2.conf
I am running version 2.2.16 of apache
I need to use the same .htpasswd file for all the sites.
I have configured CNAMES on my domain for all of these hosts.
I just did a clean install of FC12 x86_64 and want to configure tomcat to run behind apache httpd. What is the easiest way to accomplish this? I'm a newbie at server configuration so detailed instructions would be nice
View 4 Replies View RelatedIf any one knows about Apache-Tomcat installation.
View 5 Replies View RelatedI have FC13 with apache up and running. I need to run tomcat to do some dynamic web with eclipse, I checked my setup and noticed that I already have tomcat5 in add/remove software as installed bu can not find any etc/tomcat and not able to find how to test. I went through the FC13 documentaion, nothing is mentioned abou apache tomcat setup finalizing and testing that ships with FC13 it works. I googled and found some docs around setup tomcat6 or tomcat 5 but not how finalize the one shipped with FC13.
View 2 Replies View RelatedI have installed apache tomcat 5.5.27 in centos5. I edited the server.xml file also. The startup.sh and shutdown.sh commands are working fine. But tomcat is not opening in the browser. Can you suggest me something or tell me the steps involved in installing tomcat. Is admin.tar.gz of apache tomcat required for its working?
View 1 Replies View RelatedI installed very old the rhel package Apache Tomcat/5.5.20. I want to update it 5.5.33 or Tomcat6. Do you have the update for redhat?
View 1 Replies View RelatedI am trying to configure simple tomcat with apache in rhel5. How can I do the same.
View 4 Replies View RelatedI am about to configure LAMP (Linux, Apache, MySQL and PHP) and following this link.However, I want to use Apache Tomcat instead of Apache, can I do so ?I can very well try and figure this out, but was just curious if someone has tried it. Or may be I can get some more ideas and useful links.I am just trying for knowledge.Meanwhile, if someone else is interested, these are the links used to download appropriate source packages.
- JRE & JDK : Java Platform Standard Edition (Java SE) 6 Update 10
- Tomcat
- Apache Ant
Here, "Apache" Ant is a software tool for automating software build processes. It is similar to Make but is implemented using the Java language, requires the Java platform, and is best suited to building Java projects.
- PHP 5.2.13
- MYSQL 5.0.90
Right now I have Apache and Tomcat running on the same server. For reasons I won't go into I'm experimenting with putting Apache on a separate server, and installing Tomcat on multiple back-end servers. This isn't a load-balancing scenario as each Tomcat container on the back-end servers will be providing a separate application/responding to a different url. In a typical setup (everything on one box) the configuration file (we use workers.properties)sets what appears to be parameters such as the location of tomcat and Java. For example, here is the current output of workers.properties:Quote:
workers.tomcat_home=/usr/share/tomcat6/
workers.java_home=/usr/lib/jvm/default-java
ps=/
[code]...
I've installed Apache Tomcat--6 and even jdk1.6.I've even created a tomcat.sh file to start the serverautomatically and it includes the Environment variables also ($CATALINA_HOME & JAVA_HOME) for automatic startup.Next when i'm using http://localhost:8080 to call the server it shows unable to connect.I've tried changing the port no of tomcat in server.xml file. but still its not working.
-->Then i tried using--telnet localhost comand--it shows Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
telnet: Unable to connect to remote host: Connection refused
Here I'[m stuck i don't understand how do i make the localhost work.
-->If I'm giving telnet localhost 25 the sendmail server is working.But the 80 and 8080 ports are not getting configured.
-->I've tried adding the port and its name in /etc/services file but still its not working.
-->When I'm giving the command--/sbin/chkconfig --list--->Its shows: xinetd based services:
...
...
telnet on.what should i do to get my tomcat server work properly.
For some years now I have been able to use openssl (apache-mod_ssl) to process encrypted traffic because I had, in effect, only one host - the main server - as the sole entry in our ssl_vhost.conf file.
Now we are working toward serving a couple of more secure sites for closely related organizations, but with their own distinct identities. This, in the past, would have meant additional static IPs with matching nic cards for starters. But my understanding is that since 2007/8 we have been able to use gnutls (apache-mod_gnutls) which gets around the old problem of Apache not being able to direct name-based traffic because that would not yet have been decoded. This is referred to as SNI - Server Name Indication.
Here my confusion begins. Is there an overlap between SSL and TLS? For instance, I would have generated RSA keys and a self-signed certificate with the genrsa command. Is this sufficient for gnutls or does it need to generate its own keys and certificates? I realize gnutls is relatively a new kid on the block but it is appealing and I'd like to give it a try.
I am working with the Mandriva/Mageia cooker with an x86_64 architecture so all packages are up-to-the-minute.
I have tomcat installed with port forwarding to http port 80. I configure ldap authentication for apache2(/var/www). But I could not configure tomcat for ldap authentication.
View 1 Replies View RelatedI am trying out jUDDI. I have to copy the MySQL JDBC driver to {TOMCAT}/common/lib but the thing is I am new to Linux and I cannot find the common/lib folder. I tried to search for apache inside the usr/lib so that i could copy the MySQL JDBC driver inside it but couldn't find the specific folder. 'Locate' and 'which' were not very helpful. I have installed 'servlet and jsp engine' for tomcat 6.
View 1 Replies View RelatedI am having two domains. for ex: www.example1.com and www.example2.com. These two domains need to be hosted under one ip. Yes by configuring name based virtual host we can do that. But, my question is my first domain(www.example1.com) need to be hosted by Apache web server, and my second domain(www.example2.com) need to be hosted by Tomact. Is it possible to configure name based virtual host for a scenario like this.
View 6 Replies View Related