I am trying to compile thc hydra on my netbook. I am running ubuntu 10.10.The configure goes fine, but when I try to make I keep getting this error, and I don't know which library it needs. Anyone help?
Quote:
/usr/bin/ld: cannot find -lpq
collect2: ld returned 1 exit status
make: *** [hydra] Error 1
I'm having trouble with the installation process of THC HYDRA, it's my first time using it, someone was telling me about THC HYDRA GTK? I managed to get THC HYDRA running in CMD, but I want to use THC HYDRA GTK and I don't get how to get it working. I checked the main site of THC HYDRA, and it has screenshots of GTK but I don't know how to get it like that. For me I am only working in CMD...
View 3 Replies View RelatedI want to install Hydra GUI. Does anybody knows how to install it via yum, and how to bruteforce ip for FTP/specific open service/port.
View 13 Replies View RelatedI downloaded the tar ball from the site.compiled it all fine. But when I try to run the line
Code:
./hydra -C Combo001.txt 10.0.6.100 ssh2
I end with
Code:
Error: Compiled without LIBSSH support, module not available../configure gives the following, and I see nothing wrong since it says ssh is found.
Code:
medusa@Cerberus:~/Desktop/hydra-5.7-src$ sudo ./configure
Starting hydra auto configuration ...
Checking for openssl (libssl/ssl.h) ...
[code]....
i want to install hydra-5.4 from source . but at first in ./configure i have this problem :
Code:
Checking for SAP/R3 (librfc/saprfc.h) ...
.. NOT found, module sapr3 disabled i didn't want that in any place such as it's site.how can i fix this problem?
I set up an ASUS WL-500gP with original ASUS firmware to my LAN with IP address 192.168.1.1. If I navigate to address [URL] in my Firefox address bar, an Authentication required window opens up asking for "User name: " and "Password: ". Correct "User name: " is "admin" and correct "Password: " is "pA55w0Rd". They work fine if I type them in manually to the Authentication required window, but for some reason I can't get in using the hydra with words.txt password file, which contains "pA55w0Rd":
Code:
[root@ ~]# cat words.txt
password
user
pA55w0Rd
[code]....
i'm trying to follow this guide: [URL] (THE GUIDE AT THE BOTTOM OF THE COMMENTS, NOT THE GUIDE IN THE OP) EDIT: Managed to install the GUI XHydra, but when I tested it out I get this error:
[Code]..
I am having trouble installing Ubuntu 10.10 netbook remix edition onto a Acer Aspire one netbook. I am attempting to install the OS from a 16GB PNY usb drive w/ the usb-universal installer and ubuntu 10.10 netbook remix .ISO
The reoccurring problem that I am encountering is that when I boot from the USB-drive and begin to install everything seems to be working, and then it is stuck at the menu where it asks who are you?; and of course i have filled in everything asked and at the bottom where you can look at what its doing in the terminal/detail section all it says is ready when you are, and the forward tap is unselectable.
my play on linux wont work i go to download a game and it just freezes then it asks me to force quit or wait is because of the computer im using a netbook nb305 toshiba with a intel atom processor with ubuntu netbook os?
View 14 Replies View RelatedWhy i cant change from 800x480 to 1024x600, that this model of EEE pc doesnt support anything higher than 800x480 at the 10:1 ratio...
Firstly my question is, is it ACTUALLY possible to 'overclock' this type of netbook to run a higher res?
Im running ubtuntu netbook remix 10.04 and am new to linux (again, so sorry) so be nice, and ive tried getting my head around this 'sudo' stuff, and the xorg.conf file (which is nowhere to be found) and ive even tried a program calld astray but im pretty sure ive exhausted my patience as trying to self-teach . . .
And ive also tried to much around with xrandr or whatever that command was.. but i cant really get my head around it, and it kept telling me the resolution didnt exist ect...
For the past 2hrs I have been struggling to make KDE launch plasma-dekstop instead of plasma-netbook, but all in vain.I removed, then purged plasma-netbook and plasma-netbook-default-settings packages but after logging out and re-logging in the Netbook UI was back! After restarting the system now I can't even seem to get the KDM. I am greeted with a black screen.--- I restarted the system again and the nasty little bugger is back again! This is so frustrating. How do I get plasma-desktop to load instead?---- Great now I can see that plasma-desktop and plasma-netbook both are running simultaneously! netbook on top of desktop. So my final Q is how do I stop plasma-netbook from loading?
View 9 Replies View Relatedi would like to change my OS to Ubuntu netbook remix, but I already have installed Kubuntu netbook package.
Is there any easy way to make switch from Kubuntu to Ubuntu? Without need to delete all my data?
I installed Ubuntu Netbook 10.04 and immediately noticed the keyboard of my eeepc 1000HE was abnormally warm. Since I dual boot XP I booted to XP and found the fan running faster to compensate for the previous heat. This did not happen on Ubuntu-the fan just was barely running. I had to place the side of the netbook in order to feel the fan running. I issued "sensors" in terminal and it showed 67 degrees C for the cpu temp. Is the latest Ubuntu such a resource hug that it heats up the CPU?
View 9 Replies View RelatedIm a new linux user and so far im loving it, problem is i just tried installing Ubuntu 10.04 netbook remix onto my Compaq mini 311 (via usb) and at first i couldnt even install from the flash stick...finally managed to by formatting the flash with an HP tool and then creating the bootable Live OS with "Linux Live USB creator 2.6."
I selected to use the whole Hard disk to install (the hard disk was empty anyway as i recently formated the drive which had windows 7 on it)
The the installation completed successfully but the problem is that after rebooting the OS wouldnt boot, leaving me with a flashing cursor or _ on the top left of the screen...
I have tried everything i could think of, using different Usb creators, formatting the hard drive before re-installing but for some reason im still left with the same blinking cursor after every install.
I have just installed the regular version of ubuntu 9.04 which works perfectly after installing but id much rather use the netbook version of 10.04
(I assume the issue has something to do with the bootloader but im completely new to the topic so cant really troubleshoot)
I wanted to try installing the Metisse window manager, and it depends on Nucleo. I got Nucleo from the AUR, but it fails to compile:
Code:
PNGenc.cxx: In function �void nucleo::png_memory_write_data(png_struct*, png_byte*, png_size_t)�:
PNGenc.cxx:38: warning: �png_struct_def::io_ptr� is deprecated (declared at /usr/include/libpng14/png.h:1125)
PNGenc.cxx:38: warning: �png_struct_def::io_ptr� is deprecated (declared at /usr/include/libpng14/png.h:1125)
PNGenc.cxx: In function �void nucleo::png_memory_read_data(png_struct*, png_byte*, [Code].....
I too have one of those nagging "stdio.h file or directory not found" things when I try to compile with gcc.
I do the following:
gcc hello.c
which gives:
hello.c:1:20: error: stdio.h: No such file or directory
hello.c: In function 'main':
[Code]...
I want to learn how to compile vim from the sources, because there are some additions that I want to add, and learn how to deal with this situations, but until now I didn't have success doing it, I can compile vim, but without its GUI I think it's a dependencies problem, but I can't figure out which packages I have to install, what are the dependencies to compile vim with its gui? how to compile gvim, but I don't have the packages for install in my ubuntu 10.10 repositories.
View 1 Replies View Relatedthis may be the wrong forum but how do i compile a .DEB from a tarball? and give me full step by step instructions preferebly for checkinstall since im not gonna distribute anything. none of that
"./configure make sudo checkinstall" crap plz cuz i dont understand it i rly wanna switch from win 7 completely but ill need ur guyz help or im stuck with it T-T.
I suddenly can't compile anything using gcc - it just stalls (even with a basic Hello World program). I'm very stumped by this in terms of what might be wrong or how to go about finding out, so the best I can do for the minute is post the trace output (attached) and ask for some pointers.
View 1 Replies View RelatedI can't compile several applications on my 11.2 x64 installation. Configure script returns something like:
"checking for Qt... configure: error: Qt (>= Qt 3.0) (library qt-mt) not found. Please check your installation!"
qt3, qt3-devel, qt3-32bit, qt3-devel-32bit packages installed. If I ran ./configure with --enable-libsuffix=64 it's done without troubles:
"checking for Qt... libraries /usr/lib/qt3/lib64, headers /usr/lib/qt3/include using -mt"
But then make returns error:
".../usr/lib/qt3/include/qrect.h:53: error: variable Q_EXPORT QRect has initializer but incomplete type
/usr/lib/qt3/include/qrect.h:53: warning: extended initializer lists only available with -std=c++0x or -std=gnu++0x
[Code]....
I am following this tutorial:But I just can't get it to compile. What do you think is wrong?
Code:
$ nasm -f elf -o loader.o loader.s
[michael:test]$ gcc -o kernel.o -c kernel.c -Wall -Wextra -nostdlib -nostartfiles -
[code]....
I have CentOS 5 x64 installed. I would like to know if --ignoreos is enough to bypass a basic package who installs a file into /usr/bin, for example. Is there a way to create an RPM designed for CentOS4, without actually installing it and run the spec file on it?
View 6 Replies View RelatedI would like to install Centos with yum-upgrade, asterisk and some iepbx program and burn it into ISO images.
Unfortunately I don't know which files to be compile into rpm. Can somebody direct you on this?
there are a number of Netbooks that will work under Debian. I am looking for one that will support touch screen, and Debian. I understand that the touch screen will not run under Debian, but I want a Netbook that will run Deb with as few issues as possible.
View 3 Replies View RelatedWhen I try to compile it get there errors: [URL].... compiling with: gcc -v execv.c -o hola I already installed build-essential, what could be happening with my gcc compiler? this is my code, as you can see it's not complex
[code]....
I can't compile using the instructions on the package... the package in question is this: [URL] ....
Just trying to play with old and good windowmaker. When running make it just says "make: nothing to be done for 'all'.
I would like to install PHP 5.2.x on my machine because Drupal does not yet fully support PHP 5.3.x and I get a bunch of deprecated warnings.
I already installed PHP 5.3 via yum and a few other php extensions.
If I install/configure PHP 5.2.x do I need to uninstall my PHP 5.3 first?
When configuring PHP 5.2.x can I use the php extensions I already downloaded when I installed PHP 5.3?
I am trying to compile a very simple 32-bit program on my 64-bit fedora 12 install, but it won't let me.
I get this error.
I tested it on the school server (64 bit Red Hat Server), and it compiled flawlessly without any warnings. I think I am missing some libraries, but don't know which.
I use a fedora-11 system and recently I installed llvm ( sudo yum -y install llvm llvm-docs llvm-devel ). When I search for llvm I get them in /usr/bin. some of the links to the binaries are broken(llvm-gcc,llvm-g++,llvm-cpp,etc.) the include files are found within /usr/include/llvm and libs at /usr/lib/llvm. How to compile them using g++? I tried to compile the kaleidoscope code given in the tutorial [URL] as per directed, but it fails to compile..
I get this...
toy.cpp:5:30: error: llvm/LLVMContext.h: No such file or directory
toy.cpp:352: error: �getGlobalContext� was not declared in this scope
toy.cpp: In member function �virtual llvm::Value* NumberExprAST:odegen()�:
[code]....
I cannot find the LLVMContext.h file too. so i guess this might be a version problem. what should i do to make it work?
I switched from suse to fedora, but i have a problem with gcc (i guess) i tried to reinstall it or upgrade it but i coudn't fix the problem.. There is a very simple example
Code:
#include <stdio.h>
int main()
{
printf(" :( ") ;
[code]....