Software :: Xfce + Kdesu Konsole + Tab Completion Ends Up With High CPU Usage By Dbus?
Jun 18, 2010
With Slackware 13.1 I decided to switch to Xfce, but as I like Konsole I'm using it under Xfce. I like to have Konsole being fired up with root privileges, so I added Launcher to Xfce panel with command as follows:
Code:
kdesu -c "konsole -e /bin/bash -l"
Now, when I open the Konsole with this Launcher everything is fine, I can run commands as the root user. But if I try to use tab completion in bash, the CPU usage suddenly goes very high. I found that the process causing this problem is:
and it is owned by root. When I kill this process the CPU usage gets normal, but I'm not able to run Konsole with the Launcher any more. The only way to get it back is to kill all the kdesu (owned by me) and dbus processes (owned by root). I also noticed that normal user (that is me using Xfce) has also exactly the same dbus process running, that is
BTW, this doesn't happen when I run xterm or Termianl. Also, using
Code:
kdesu dbus-launch konsole
gives the same odd effect. So I'd like to ask how can I solve this problem? I'm running Slackware 13.1 with Xfce 4.6.2 built with Robby Workman's SlackBuild [URL] with the source code modified so it runs KDE4 services (kdeinit4 and krunner) instead of KDE3 services (kdeinit and dcop). I have also my own custom kernel, but I think it's not relevant in any way.
I just upgraded KDE on my openSuSE 11.2 installation. I have never had any problems doing this in the past, but this time, when I rebooted, I noticed that after a few seconds of idle time, my CPU usage goes sky high. I ran top in a console and noticed the culprit was xorg. I am using an NVIDIA card on an AMD64 3200+ with 1 gig of memory. KDE version is currently 4.5.85. Like I said, I didn't have this problem until the last update. Any ideas as to what could be causing this?
I'm running desktop machine with with a core2 duo E6400 with 2GB RAM. I have completed a fresh install of Ubuntu 9.10 (fully updated). I have 10GB root, 2GB swap, 10GB home and 80GB data parititons.
I log in to main administrator account (first boot), create a new user (desktop) account and then use the switch user to log into the desktop account (so logged in to two accounts at the same time).
Whilst logged into the desktop account the CPU usage as seen in system monitor shows the two CPU's alternating at around 100% and the system slows down greatly.
Ubuntu 9.04 64-bit I just checked my system monitor and it looks like my memory is at a constant 900 MB's out of 4 gigs of ram. This seems high for only having firefox open.
I have recently upgraded from Kubuntu 9.10 to 10.04. I am having trouble with CPU usage by the X server. When running KDE programs (for example Kontact and Amarok) my computer is becoming very sluggish. This seems to be because X is using 90-100% of the CPU constantly when there are any changes to the application (any sort of redraw, even the mouse moving across the screen). I don't experience this with other applications (I am currently writing this from Chromium with no issues at all). Below is all the relevant information I can think to include.
INSTALL PROCESS: Fresh install from Ubuntu 10.04 LiveCD. My /home direrctory is on a separate partition so that has remained unchanged from 9.10. After installing Ubuntu, I installed the kubuntu-desktop package to install kdm and the KDE desktop.
The only real change from my last install is that /var is now also a separate partition (in a bid to save my MySQL data should I have to reinstall again) but it is on the same hard drive as my root partition and so shouldn't be causing any performance issues.
MY X SETUP: Three screen setup using onboard and PCI graphics cards. This worked perfectly before and, after reconfiguring X using nvidia-xconfig works almost as well again. Except that one of my monitors autodetects at 1280x1024 where before it was a higher (and widescreen) resolution.
The issue only presents itself when KDE application screens are visible and disappears when they are hidden (either minimised or closed) As far as Ican tell it could be an X, Qt or KDE issue. But I am not sure what versions of these will have been changed in the upgrade.
My problem seems to be very simple, it's high memory usage. I occasionally will use movie player to watch a few shows and I use firefox as well. My memory usage starts out real small about 500 mb but after using firefox lightly and movie player it jumps to almost 2 gigs and this is after they've been closed what gives? I've attached an image so you can see what I'm talking about.
I don't understand why I have a 800MB usage at startup. I didn't add any programs to start at startup. I do though have 10 primary partitions that are auto mounted at startup but it shouldn't use up so much, I have 2GB total RAM.
At startup nautilus uses ~400MB of virtual memory in the "system monitor"
Also which is RAM and which is SWAP in resources in system monitor: Virtual Memory && Memory?
-i figure vm is ram but thats not possible sometimes...it exceeds 2GB
I play RuneScape most of the time i'm on the computer and i always keep an eye on the performance. Yesterday and the days before, everything was going good, cpu usage it was causing was between 30 and 60%, now it wont go below 70%. It's always 70-99% for some reason :s i have set settings for graphics to OpenGL (they were like that before too with no problem) and it started causing high cpu usage. If i set it to Safe Mode in graphics settings it gets 100%, I never tweaked the drivers, i have a NVIDIA GeForce 9600 GT, i have the opengl thingies installed along with my nvidia driver. Ubuntu 10.10 32bit.
I am calling clock_gettime() function to get time with nano seconds accuracy. My program works fine on Ubuntu but have high CPU usage problem on CentOS 5. it takes 40% CPU on Ubuntu and 90% CPU on CentOS. Kindly give me solution so that I can reduce high CPU usage problem on CentOS. You can build this code like: "gcc -lrt gettime.c -o gettime.e"
I've installed my debian sid about one month ago (first xfce, next gnome) but noticed that it's kind of really slow. The upgrades take ages, launching (and using) firefox takes so much time,... In comparaison to my ubuntu, archlinux (on the same computer) or previous installation of debian there is clearly a problem somewhere.Today I tried to do a "top" sorted by mem usage : 3.5% xulrunner-stub, 2.1% dropbox, 1.4% aptitude (doing upgrade), 1.4% clementine,... nothing terriblebut still I've 2.7Gb or RAM used (more than 50%)
$ free -m total used free shared buffers cached Mem: 3967 26851282 0 79 1938
Gnome-shell uses high percent of CPU (more than 90%) on Xorg. I have debian jessie on a Asus N53 ( Core i7 and Nvidia GT550 with nvidia optimus). I also installed bumblebee but nothing changed.
top says there's only 12MB free (out of 1GB), but I can't figure out what's using all the RAM. rtorrent is using 13MB, and the rest are in bytes. (ran top as root)
However, I would like to ask if anyone else is experiencing Higher than normal CPU usage with openSuSE 11.4 PR?? My system, which is probably similar to others, increases the air flow with the fan on the CPU when it is working hard. Mine gets rather noisy. (don't have it on the floor, but right next to me) This fan speed increase has been lots more prevalent in the newest version of openSuSE.
Have also used 'top' and it looks like xorg is one of the biggest hogs. However, when I use VMware it goes into hyper drive a lot.
yesterday when 10.04 got released i decided i'd install it and try it out, when i tried to run a java applet on it (runescape for example) the CPU usage got really high (around 100%), is that normal?
Info about my processor if you need:AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ 2,61 GHz.This is my first time ever using ubuntu.
I've been using Ubuntu consistently for about three days now. I really, really love the interface and how everything works and all that, but I've been having a couple of weird problems with speed.
Graphics things seem to work really well. When I go into the overview of all my workspaces, it's instant and looks great. The problem is when I open and use some applications.
For example, when I open up the software center, it takes longer than it did the first time to start up. Also, when I drag windows off from being maximized, it takes literally about five seconds for it to show up as being dragged around by my mouse.
When I look at the system monitor, about 20% of my CPU cores are constantly being used. That's 20% each. I have a 3-core CPU, could that be the problem?
Another example: when I went to ..... just now, it would take a second for any volume changes in the video to register.
And I also have smooth scrolling in firefox, but it's very unresponsive now. It's slow as all hell. Even notifications are showing up more slowly.
So, what's the deal? What could I have done wrong?
CPU: AMD Phenom II X3 2.8Ghz GPU: ATI Radeon HD 4860 1gb RAM: 4gb
One more thing: I have really bad screen tearing when I try to move windows around, as if there isn't any vsync on. Where can I turn it on or fix this?
I'm still pretty new to Ubuntu and Linux, but I'm an advanced computer user. Since I feel linux is killing my CPU I think I'm going to boot back into Windows 7 for now, but if I can fix this problem I think I want to keep Ubuntu as my main OS after this, having Windows for games, unless I can get Wine to work right with them.
OSS, even though it's emulated *through* ALSA, consumes a microscopic fraction of straight ALSA's CPU usage. For example, when I'm playing something through ALSA with XMMS2, I'm getting about 25-30% CPU usage, but with OSS output, only 2%, tops. The same applies to any other application in which I can choose the output method. And, I'm on 10.04.
I use an Ubuntu 10.04 minimal install with only the packages I want, I like to keep things pretty slim.
On bootup, when I execute "startx", everything starts to load, this is fine. However, just off of a cold boot with only my startup apps running, conky shows around 450mb of RAM usage. It usually is only around 150 - 175.
Sometimes when I boot my computer Conky shows the normal RAM usage in the 150mb range, sometimes it's in the 450mb range.
My startup apps when I start X is openbox, tint2, wicd-gtk, feh (for wallpaper), and conky.
I open up htop when conky reports the weird RAM usage. htop also shows the weird RAM usage but I can't seem to find the memory hogging app.
Is this a kernel issue? I'm using the vanilla Ubuntu 10.04 kernel. Will recompiling from kernel.org fix this?
i am learning to using ubuntu as my server and learning using vps too
now i getting consfuse about my server memory usage i just have 3 sites , 1 blog site and 2 company profile but apache memory usage is more than 300MB and total of memory use in my server is more than 500 MB (maximum 512MB burst memory)
i am using drupal for my website is this normal ? because in last week, memory consumption in my server no more than 380 MB
I have a problem that the process modem-manager eats up all the cpu resources making it impossible to do anything on my PC. This issue is comes up randomly even during boot up and unfortunately very often. The twist in it is that I can not even kill the process using kill or killall (tried to kill even from top; of course with sudo)
How can I shutdown a process when kill does not help? Is there any way I can disable to start this process during boot up?
I'm diagnosing why my application is slow and I found the problem by writing a simple TCP client/server, where each side sends/receives 64k at a time. The bottleneck is on the receiving end, which uses has a Realtek 8139 100Mbit/s NIC and running Windows 7. I'm able to get 11.9 MiB/s as expected, but the CPU usage is very high - 80% on 0th CPU and ~20% on 1st CPU. Task manager shows conhost.exe taking 25% CPU and 10% for my program.
When I try the same receiving program on Debian, I can still get 11.9 MiB/s, but the CPU usage is now only 1% (user & system). On the sending side, the CPU usage is practically 0% in both Windows 7 and Debian.
I tried changing the TCP receive/send buffer sizes and disabled internet connection sharing (does extra packet processing?) on the receiving end,
I am trying to figure out why the remote X performance of our RedHat 5.3 system is so bad. We have tried using X (Gnome session) from several different X Servers (Windows Xceed, Windows XWinPro, Linux Xnest - both Fedora 11 and Centos 5.3 and Mac OS Xnest) and the system is barely usable. I have monitored the network traffic on the RHEL system and it goes up to 6MB/s at some points, which seems a bit too high for X net traffic?I have disabled ipv6 and any ip_tables modules and that has helped a bit, but it's still not very good.I suspected the network hardware and driver, but I cannot see how that would cause network traffic problems.I wonder if there are any X Server network settings I might check, or whether trying XFCE would be a better option over Gnome. If so, do I have get the xfce group from a CentOS Repo, or is there something better suited to RHEL?
For some reason after I close firefox , firefox-bin keeps running and it eats more cpu than when firefox was open, a lot more. Same thing with seamonkey, seamonkey-bin keeps running after it is closed. Attached are two pictures , 1) While firefox is running: notice the low CPU usage 2) Firefox closed, CPU is almost 50%
I have two pc's that I've recently converted to Lenny boxes, and I've noticed that whenever there's a lot of disk IO, one of my cores (both pc's have dual core cpu's) jump to 100%. Is this normal? They're both amd64, and I think both of them should be using the AHCI SATA driver.
If you need any more information about my setup, let me know.
I upgraded from Fedora 13 to 14 over the network. Everything seems to have worked. The one problem after my install is that I have noticed that setroubleshootd consumes alot of memory.
[Code]
It doesn't take long for setroubleshootd to jump in memory usage. I can kill the process but it will start up again. I have tried disabling the service but it doesn't show up in /etc/init.d. # service setroubledshootd stop setroubledshootd: unrecognized service So I am not sure what I can do to resolve the issue with setroubleshootd besides killing it off every 15 minutes.
I'm using Karmic koala 9.10 64bit.Have three HDD, WD Raptor 36GB X 2 and Seagate 160GB.2 WD Raptors are striped (RAID 0), and all hdds are formatted by ext4.(Intel ICH9R raid) Problem is that, when reading/writing hdd heavily, system freezes a moment or very very slow down. When I used a windows XP, there's no problem. Moreover, one other machine, Karmic Koala 9.10 64bit and ext3, no raid, works very fine.
My system consists of, Intel C2Q Q6600 2GB DDR2 6400 (1GB X 2) Gigabyte P35-DS3R Geforce 8500GT 256MB
[Code]...
If I format my hdd and re-install ubuntu, does it become better? or, if I use software raid provided by linux kernel, or if i don't use a raid?
thing I did when I installed 10.04 was to re-arrange my icons. I clicked on the first and started to drag. The icon did not move, and nautilus was using 94% of my cpu for a good 15-20 seconds before gtk-window-decorator was using 95-100% of my cpu for a few more seconds. Finally, after a few more unsuccessful tries with the same results, I was able to move the icons.
I assumed this was a bug in nautilus, however the same thing occurred in Chrome when I tried to re-arrange my bookmarks, and the same thing in gnome-panel. The only thing in common I see is gtk-window-decorator.
I am running latest apache2 available in the lucid repos on my desktop. All packages are updated as of this moment. Now in the root of my web server I have placed several soft links that point to folders on another ext3/ntfs partitions on the same disk. When I try to download any large file (say above 500M)on this server using firefox, when the 'save' window appears, my desktop freezes, I notice very high cpu-ram-disk usage, even though I have not yet clicked on 'ok' to save the file. This issue is not present when the file size is small. Note that firefox and the webserver are running on the same computer.
Also I have tried nginx and lighttpd and the issue is present there as well. When I tried downloading the same files using Internet Explorer 6.0 using a XP VM the issue is not present. However on Windows as well using Firefox the issue recurs.
I have been using ubuntu for 4 years now on my decent laptop with 2 Gb RAM, dual core centrino, etc etc. Yet, in all those years I have been using this superior OS, I still have to do hard shutdowns because some program runs wild. I have lately 2 scenarios where I have to interfere with the process:
1: amarok crashes and leaves the python script for the gnome shortcut keys running at 100% CPU. Or: thunderbird-bin keeps running after apparently clean close of Thunderbird. That's not really bothering me, I just kill both processes.
The bigger problem is scenario 2: 2: VLC starts eating all my RAM (for no reason), my SWAP starts filling and my computer becomes unusable for 10 minutes. Or: my matlab script is too big and eats up too much RAM -> same. Note: I have nothing against SWAP because at many other times it's very useful
These are stupid and annoying problems where there is an easy solution:
1) automatically kill the stupid process that runs at 100% CPU 2) automatically kill the stupid process that eats up all my RAM
