I have a file that I am attempting to use to restore a website for a client. The file is a drupal folder structure where all of the files in the folder (3000+) have been individually compressed into 3000+ individual gz files.
I have figured out how to uncompress all the files using WinRAR but it puts all the files into a single directory, i need the original folder structure maintained.
How do I download all the files form here: [URL]. I am on freeBSD 7.0 and I tried wget with the -r switch and it gives me URL's only. Maybe this is simply not an ftp site I don't know. How I can download all those files with the same directory structure.
View 5 Replies View RelatedI have uShare 1.1a setup to talk to my XBox 360. If I share a directory that has no subdirectories, the video files display on the XBox. However, most of my files are in sub-directories on a different partition - I don't really want to copy them to the share, but uShare doesn't seem to recognise any sub-directories or files contained therein.
I have tried setting up symbolic soft links directly to the video files (although this is a pain, it is better than moving the files)...
Code:
ln -s /home/jonftp/TV-Shows/Buffy/Season-1/Buffy-101.avi /home/share/Buffy-101.avi
...but these don't show up on the XBox either.
How can I get uShare to "drill down" the directory structure to list the files or how can I get uShare to follow symbolic links?
I have a drive with an NTFS partition where all the files were deleted. What I'm looking for is a way to rebuild the directory structure and recover the files. I really, really want the directory structure as the partition contains 460 Gigs of data. Normally I would use the tools here: [URL] but I've never dealt with this much data before. Everything there that I've used creates a pretty messy dump however.
I have used ntfsundelete before but only for a few files at a time. I have no idea what would happen if I tried to run it on a partition of that size. I'm comfortable with data recovery but this amount of data is beyond me. I've run ntfsundelete with no args and from what I can tell of skimming the pages of output all the files are fine. The partition has not been written to.
What is the best and simplest way to compare two directory structures without actually comparing the data in files. This works fine:
diff -qr dir1 dir2
But it's really slow because it's comparing files too. Is there a switch for diff or another simple cli tool to do this?
I am trying to check flac files in a multi-level directory structure, and would ideally like to get ordered output with the full path file name.
I could write a multiline script, but was wondering if there were better ways of accomplishing this.
The current command I am using is:
Code:
find . -name '*flac' -exec flac -t {} ;
I want get the information from a directory full of files.
What I have so far is this:
Code:
find <path> -exec head {} ; | tail -2
My question is, how do I get that certain section from each file, since tail will only affect the last file. I've tried piping head and tail to sh but that's not available due to permissions.
I need to recreate in a local folder called /distro/fedora/ the full directory tree (including eventually hidden files, symlinks, etc.) contained in the .iso file just downloaded (Fedora-15-i686-Live-Desktop.iso).
I understand I can mount the ISO image using something like this:
mount -ro loop /path/to/image.iso /mnt
but then, which would be the best way to get a copy exact of what I see underneath /mnt in to /distro/fedora ?
cp, tar, clobber?
i have a large directory of .bsp files that i would like to convert .bz2 archives. I've been searching for some time and all i can find is the obvious compress multiple files into one large archive. If anyone knows how to convert each file individually, while retaining the original file name (testmap.bsp would be archived as testmap.bsp.bz2)
View 5 Replies View Relatedi just started dabbling with this Linux program Fedora and i go to school for cpu forencics but havnt reached Linux+ yet.
View 13 Replies View RelatedI've the following file structure that I would like to add to git.
Code:
These are big directories and I don't need them all checked out. I only need the src directory. After I commit the files in the /app/src, it must be pushed to a remote site.
If I want only to checkout the src directory to work on, it's important to create a special file structure in git? For example, instead of doing git init on app general directory, should I do git init on all subdirectories?
Is it possible to checkout only part of a file structure in git?
Unfortunately, I deleted my /home/ directory by running "rm -rf *" accidentally. The partition (/dev/sda3/) has an ext3 filesystem. After deleting the /home directory, I shutted down the PC and rebooted from a RIPLinux liveUSB, which has some tools that allowed me to recover some files. However, what I would like to do is to recover the directory tree structure, rather than the files, in order to see which files I deleted.
What I exactly want is the following:
I would like to have the output of "ls -lR /home/" before deleting all the files, but the problem is that now the /home directory is empty.
My clearly outdated Linux course I'M using is telling me that the directory structure for building RPMs is in /usr/src/redhat, but on my redhat system, there is only /usr/src/ > debug & > kernels, folders.
View 5 Replies View RelatedI am using GTKPOD to add music and sync my Ipod touch. I have gtkpod up and running and I have gone through the initial steps of changing the repo and selecting my ipod touch. But now when I try to "load ipod" i am receiving an error stating that the IPOD directory structure not found.
I have changed the repo so that is ipod mount point: /mnt
But after selecting load ipod;
Could not find iPod directory structure at '/mnt'.
If you are sure that the iPod is properly mounted at '/mnt', it may not be initialized for use. In this case, gtkpod can initialize it for you.
Do you want to create the directory structure now? >>>Create Directory Structure
Following this message; Warning
The following has occured:
Error initialising iPod: Problem creating iPod
How do i create the iPod Directory Structure that it is asking for?
I'm trying to configure Freevo and can seem to find this directory "~/.freevo/local_config" .
My question is what does the Dot mean before freevo in the path ? and where is it pointing to I'am looking in the home directory but not seeing it ?
I've recently installed xubuntu 9.10 and when try to delete a folder with many sub-folders, this is what happens:
dav@dav-desktop:~/Downloads$ ls -l
total 1266644
-rw-r--r-- 1 dav dav 243161797 2010-04-06 20:06
[code]...
I am using RHEL 4.4. Last time when I reboot my server it generate an error, and mention to run fsck command in repair mode. When I ran, this fix some problems, but after that it generate an error of gdm and X11 services after showing login sceen and getting user name and passwod. But I login via putty from a remote system. So, when I tried to make changes like create directory or file or even tried to make any change in any file it generate an error that " you can not make changes in read only file system".
View 10 Replies View Relateddiff has the ability to trasverse directory structures. cmp has the ability to manage binary files.
I'm looking for something which allows me to compare a directory's contents, including files and subdirectories, and so a binary comparison.
Any suggestions, scripts, etc. which may be of help?
Some of my directories are huge, with huge (image) files in them.
I've been using rsync in a bash script to make hourly copies of jpeg files that are created every few minutes. The images are contained in a number of subdirectories, with the filenames using the date and time
Quote:
data/images/GARI/GARI_20100825_135403.jpg
data/images/GARI/GARI_20100825_135903.jpg
data/images/FRED/FRED_20100825_135407.jpg
At the moment, my source and target directories are identical, and rsync is easy:
Quote:
rsync -av data/images/ /mnt/data/images
Note that the source directory is purged at regular intervals to stop it filling up. So the target directory has all the images, but the source doesn't.
I need to change my script so that the target directory has a different structure from the source directory, like this:
Quote:
/mnt/data/images/GARI/2010/2010-08/GARI_20100825_135403.jpg
/mnt/data/images/GARI/2010/2010-08/GARI_20100825_135903.jpg
/mnt/data/images/FRED/2010/2010-08/FRED_20100825_135407.jpg
Is there any way I can do this with rsync in a bash script?
Amarok is nice, and currently the only thing I've tried that will actually play audio from network shares and not lock up. Only problem is that it doesn't seem to list my library by directory/folder structure.. only album/artist/genre or some variation thereof. Is there anything that does list by folder structure?
View 3 Replies View Relateddoes any one knows a linux based program/script that can generate html files based on directory structure?
View 1 Replies View RelatedI would like to find the command that copy my eclipse options to another workspace code...
It doesn't work, and it could be source of error to write the path .metadata/.plugins manually. It certainly a better idea to create a complete script ?
I have several copies of a file set with different organizational structures, but the same files. i.e.
On client1 files can be found in ~foobarfile1, ~foobarfile2, ~foo-avernfile3, ~foo avernfile4
On client2 files can be found in ~foo-barfile1, ~foo-barfile2, ~foo-tavernfile5, ~foo avernfile6
On client3 files can be found in ~file1, ~file3, ~file5, ~file7
I have access to one client and the server where I'd like all the files to be synced. I'm not worried about conflicts, just having a complete copy of all files[1-7]. Is there a way to cause RSYNC to remove the directory structure, so that I get something like:
client1% rsync files server:backup
client2% rsync files server:backup
etc
where at the destination all files will be checked against the destination set regardless of the source directory structure?
Is there a way to force rsync to not make directories in its destination directory; ie, to simply dump all of the files from the source directory directly into the destination without copying any of the folders that the files were originally in? I tried --no-dirs, but that seems to only be for empty directories.
View 1 Replies View RelatedI'm having problems with compiling recursive Makefiles in my directory structure:
My folder layout is:
top/|- one/|- one.c (With main function)|- zero.c|- two/|- two.cin my top folder the make file looks like:
Code:
MAKE_DIRECTORIES = one two
.PHONY: all
all: $(MAKE_DIRECTORIES)
.PHONY: $(MAKE_DIRECTORIES)
$(MAKE_DIRECTORIES):
@echo $@
$(MAKE) --directory=$@
in my one and two folder I have the following Makefile:
Code:
.PHONE: all
all:
@echo $@
$(CC) $(CFLAGS) *.c
But when I compile it from top folder: make
I get following output:
Code:
one
two
Which states that directory statement by echo in main Makefile is ok but the files are not compiled in one and two.
I am trying to create a simple bash script to rsync some folders within a directory stucture. I am using wild cards, in the rsync source directory structure, but my command always fails. I believe it is the way I am using wild cards within my for loop. Here is my command ;
Code:
for seq in `cat test.txt` ; do rsync -nvP /folder/folder/folder/folder/folder/**/$seq /folder/folder/folder/ ; done This always fails, where if I do a ls to the destination, to test the path, it always works.
I have a file that has been created by exiftools and then parsed and cut to fit my needs and thrown into a file that looks like this:
Code:
I then make the file executable and then execute it. Trouble is, the destination directories don't actually exist, so naturally, the "ln -s" fails.
Is there a way to create the destination directories dynamically based on what is specified in the file above?
I will be doing actual development and testing on the same machine as the server. It is a single user machine in the sense that I will be the only one working on the machine. There will be multiple hosted languages, specifically PHP and RoR while possibly expanding later. I'd like the setup to translate well to a production environment. With those 3 things in mind there are a couple of things I've had in the back of mind.Seeing as it's a single user machine I haven't been able to decide whether or not I should be working on things out of my home directory or if they should be located outside of it.I'm feeling that outside of a user directory would be better as it would translate better to a production environment, but I'm also not sure if that will come with any permission annoyances or concerns seeing as I'll be working on the same machine. Hosting multiple languages seems like it may be a bit quirky. With PHP I've found you're generally just dumping the project somewhere in the document root where as something like a Rails app you have the entire project and you only want the public directory in the document root.
View 1 Replies View Relatedi am running Ubuntu Lucid x64 as a fileserver that shares its files via SFTP, NFS and Samba. Currently the hard disks are configured to go to standby if they are not needed. This works perfectly as long as no one browses the shares or my HTPC is running: That one repeatedly looks through the shares for new music or movies. In other words my problem is that the disks are spinning up a lot more often than they should have to. Additionally the spin-up time delays the response time while browsing. Since the machine has a lot of unused RAM i want to tell the kernel that it should keep the directory structure in memory. That way the disks would not need to spin up every time someone browses through the directories.
View 2 Replies View RelatedI have to set up my development environment under OEL 5.4. The internal directory structure is more or less fixed, the question is where to put the whole application tree in standard FHS for the development phase.For production, the system will be deployed on a server where data is kept with an Oracle 11g database. Development goes with JDeveloper which has its own internal application/project directory structure; however, I whould like to be independent from this. Unfortunately, by carefully studying the web for FHS, if I will adhere to it I only find ready-made packages to put under /opt, for example. No development aspects are mentioned. make some proposal, possibly with respect to best practices.
View 4 Replies View Related