Software :: Fedora 12 Yum Hangs
Jan 5, 2010
Installed F12 a few weeks ago. Everything was working fine. Then I wanted to install perl-cpan, so when I run "yum install perl-cpan", or "yum update", it hangs on "Loaded plugins: presto, refresh-packagekit".
I've let it hang there for hours, nothing ever happens.
For the first week or so, Yum worked fine, I could manually update as I've done on other Fedora versions without any issue.
In the Gnome gui I have automatic updating disabled. As far as I can tell, yum-updatesd isn't running and isn't enabled. I wanted to update things manually for a while until I got this new box "settled in".
I know I can install cpan via other methods, but this strange behavior with Yum has me worried.
why Yum just hangs?
View 8 Replies
ADVERTISEMENT
Feb 15, 2011
I am trying to install Ubuntu 10.10 x64 on a HP Pavilion p6565uk.
My PC is x64 compatible, although ubuntu will not install.
I don't get to any gui, it says ubuntu will continue install in 5 seconds, at 0, nothing happens. The CPU light is flashing, but nothing happens.
After about 10 minutes, it reboots, but when the HP splash screen shows (Before the boot selection screen) it just hangs. I have to do a hard shutdown to boot back up.
I am using wubi for install.
View 1 Replies
View Related
Oct 5, 2009
I rebooted my Fedora 11 server via SSH and when it came back up it booted the gui, but no option to log in just a mouse pointer and a spinning blue circle...nothing I can do to get it back.
I should add that I installed the latest updates this morning and this was the first reboot since then.
View 1 Replies
View Related
May 24, 2010
Since i installed fedora 12 i cannot successfully shutdown or reboot my pc as was possible with fedora 11: i already tried with no luck with desktop button, the commands 'poweroff', the 'shutdown -h now' and the 'reboot' but the system go to the bliking cursor and hangs without powering off (and reboot while requested). And i have to hard poweroff the system... (GRRRR)If i go on the console I can only see the system terminating services and saying "halting system" and then hangs...
Now i have kenel 2.6.32.12-115.fc12.i686.PAE, but this problem happened with last 5 preceeding.I use the mjm installation guide since fedora 7 (or later) and i had the following HW (lspci).
View 3 Replies
View Related
Dec 5, 2010
My fedora 14 is upgraded from fedora 13, which was upgraded from fedora 12. Everything seems fine, but recently I met across a very strange thing.Fedora 14 shutdown properly, but it won't reboot. It will hang at the last step(I guess that is the last step: [*****.*****] Restarting system.The picture of the last steps before it hangs is attached. Please someone give me a hint how to diagnose it ?
View 6 Replies
View Related
Jan 21, 2011
First time on the forum, excuse me if i'm posting this in the wrong area. So with that being said, here's what goes on - right before it gets into the loader, it hangs right before it gets to it, where it says it's going to load it.
View 3 Replies
View Related
Jul 28, 2009
i have been using F10 and before that F8, so after release of F11 i couldn't resist to install. system specifications are:Intel Pentium D 2.8 GHzRAM 512MbHDD 80Gbthe only problem is that it ceases and it's unexpected. sometimes i loose my work although it is not of much importance but it is that way.for initial few times i hoped it as a bug. but i think it is not.i love Fedora i looking forward to use it.only my mouse is moving all others locks up.one thing i used "unexpected" because it all happens regardless of any specific applicationor any time duration.all i need after it happens is to restart manually using restart button.i don't know whether my graphics driver is right or not?graphics seems right but during scroll it doesn't looks good.
View 6 Replies
View Related
Sep 29, 2009
I have been using F10 since its release and have not had any trouble until now. During my last session, I ran an update. Today when I boot my desktop (single boot btw), it hangs just after the boot loader. The only sort of warning is:
eth0: link up, 100Mbps, full-duplex, 1pa 0x45E1
I have browsed the forums to no avail. Other have the same issue, but with no posted solution. I have tried disabling NetworkManager, but I think it may be the service that runs after NetworkManager.
View 2 Replies
View Related
Dec 4, 2009
I have recently rebooted after applying weeks of updates and I cannot login through ssh. In the /var/log/secure log it shows the public key is accepted but the session never gets to a bash prompt and ctrl-c must be issued from the connecting xterm. I have tried to connect from several other redhat and ubuntu machines all with the same result.
View 1 Replies
View Related
Dec 22, 2009
fC 12 hangs at auto logon. It was working fine and other than updates haven't made any changes. I have a backup image a week or so old that I can revert to, but was hoping to do a repair. Anyways it gets to the logon window and that's it.
View 2 Replies
View Related
Dec 31, 2009
About a week after I installed F12 on a brand new system, a friend came over and went on to play poker on facebook. At some point he yelled that the PC froze. I was working on another machine at the time and tried to ssh to the supposedly hung system, but couldn't; Except for playing poker he had audacious open and about 3 seconds of the song that was playing at the time of the hang, kept looping. Neither Ctrl+Alt+Backspace nor any of the Alt+SysRq combos had any effect whatsoever, so I had to press the reset button (and I have to say this was the first time I had to do so in linux after almost a decade of using it, save for a hiccup with my first gentoo kernel).
The system usually freezes if there are two or more sound streams, but that is not always the case. The best way to get the system to crash is by playing something in audacious or rhythmbox while seeking through a video in mplayer or vlc or having flash content appear in firefox (I am using adobe's latest 64-bit flash plug-in and have been using it without any problems -though on other systems- since F10). Also most but not all the times the system is going to hang, there are a few skips in audacious every ~10-30 minutes. I've been getting the lock-ups with every kernel released so far.
My system logs don't contain any useful info after each hang; there are however certain problems mentioned in syslog which I thought they could be relevant, but they always appear whether the system works fine or not, namely the following:
Code:
I used to get a lot more of these with previous kernels:
Code:
Code:
This one appeared every now and then until Dec 25:
Code:
And this one is always there:
Code:
Finally, at every boot I get this from abrtd, but it doesn't seem to be related:
Code:
Yesterday, I devoted the entire day to hunting down the culprit, but I couldn't get the system to hang; I had rhytmbox, audacious, totem, vlc, mplayer and vlc all playing music and videos simultaneously from local disks, network shares and through upnp, I got myself a facebook account in order to play that zynga poker thing, I upgraded alsa-lib to 1.0.22 from updates-testing, rebooted countless times, but the system didn't hang nor did any of the above messages disappear.
Today as I was browsing through some web pages, one of which had an interactive flash ad, while listening to music and the system froze again.
System specs:
View 13 Replies
View Related
Feb 23, 2010
i've installed nvidia driver by
Code:
yum install akmod-nvidia
every thing went ok , but after reboot the system hangs right after
[code]...
View 1 Replies
View Related
Mar 1, 2010
My Fedora 12 Hang in the GUI Log In screen.
Some time can boot in runlevel 3 sometime cannot.
From my CentOS box I'm giving this Hard info:
Code:
View 14 Replies
View Related
Mar 27, 2010
I have a problem in fedora 12. During playing of mp3, some times the song hangs for about 20-30 seconds, and resume with the seconds added of the blocking period.
This problem is indifferent of player. I've used exaile, audacious, banshee and rythmbox. I have noticed that when this happen in /var/log/messages appear this message:
Code:
The pc is a notebook acer aspire 5715z with cpu intel t2390, chipset intel gm965/ich8-m, vga intel x3100.
View 8 Replies
View Related
Aug 9, 2010
Does not matter if I first start Xorg from GDM or from console (runlevel 2 then startx), but after I upgraded to Fedora 13 Xorg is hanging on the first run.
I have to always kill Xorg and then start again. Second run works fine.
View 1 Replies
View Related
Dec 4, 2010
I'm trying to run CentOS 5.5 on QEMU/KVM (Virtual Machine Manager) but it randomly hangs during the installation.. Someone is having the same problem?
View 6 Replies
View Related
Jan 16, 2011
Boot-up hangs at black screen with blinking cursor in upper left corner for over 2 minutes before continuing. I select F 14 with grub hit the enter key and go straight to a black screen with blinking cursor. Hitting the esc key does nothing until boot-up actually starts. Afterwards, boot-up is perfect. I had this problem a few upgrades ago and the fix was simple but I can't remember what I did. I've searched every phrase I can think of and can't find a thread that addresses my problem.
I have a F 13 kernel on my machine and have no problem booting it.
Dual-boot, F 14 and windows 7, 64 bit.
View 2 Replies
View Related
Aug 5, 2010
After doing a reinstall, and then upgrading, I have a problem: as the boot script comes to ATD, it hangs. Someone suggested doing an interactive start ---- and it worked! Just say no to ATD, and boot goes well. Of course, I don't really want to do that each time. How do I remove it? That is, get it out of the init.d or rc.d boot procedure
View 4 Replies
View Related
Apr 20, 2009
I want to install fedora 10 on my PC. But after booting from DVD a screen comes which tells me to:
" - to install or upgrade in graphical mode, press the <ENTER> key - use the function key listed below for more information [F1-Main] [F2-Options] [F3-General] [F4-Kernel] [F5-Rescue]"
when I press "Enter" nothing happens, even the function keys does not work & after some time PC restarts. The DVD is ok I have checked it in my friends PC, it works on his PC very well. My PC configuration is:
Precessor : Core 2 Duo 2.20 GHz
Ram : 1 GB
Hard Disk : SATA 160 GB maxtor
OS : Windows XP service pack 2
BIOS Version/Date:Intel Corp. NL94510J.86A.0010.2007.0523.1650, 5/23/2007
I have tried to install fedora 10 in "virtual box 2.1.4" but the result is same.
View 2 Replies
View Related
Oct 18, 2009
I'm running fedora 11 2.6.30.8-64.fc11.i686.PAE. System hangs within 10-12 hours of running almost every day. It happens when nobody at the pc. There is nothing interesting in the log files. Kindly let me know where and what I have to check in this case for solving it.
View 12 Replies
View Related
Oct 24, 2009
My mouse still moves, but it doesn't have any effect clicked. My keyboard doesn't work. Sugar doesn't hang at all
View 1 Replies
View Related
Dec 23, 2009
I booted up the computer (Fedora 11) and it hung at the blue screen with the F bubble in the middle. I waited for quite sometime without any change to the system I held down the power button to power off and tried starting the computer again with the same result.
When the sytem reboots and I press alt+ctrl+2 i see messages like below on the black screen:Unknown username "root" in message bus configuration file.Could not get password database....Failed to start message bus: Could not get UID and GID for username "dbus"..Please help me get the system up. I saved some data and did not take a backup. Is there's a way I can restore my system to a previous date? Or backup my data somehow?
View 2 Replies
View Related
Jan 23, 2010
Initially I have A system with XP sp3,1GB RAM and 250GB Hard Disk,Intel Dual Core Processor 1.8GHz. After I Installed Fedora10 with dual booting option. Till now everything is fine.. After I updated the Fedora10 to Fedora 12. Fedora 12 is hanging in 3d Desktop Environmnet.It is working well in normal Desktop environment..
View 6 Replies
View Related
Feb 18, 2010
I see there are lots of messages about fedora 12 freezing.Actually I have such a problem with fedora 11 since I updated to kernel 2.6.30. My laptop, all of a sudden, freezes. Everything is freezed: mouse is not working, keyboard not responding (hitting caps lock produces nothing), can't switch to terminals, ctrl+alt+canc don't work. I can just push the power button to shutdown the system. BUT the hard disk activity is still going on. I can see and hear the sleeping daemons that cause some usual disk activity while the rest of the system is completely freezed.My system is a HP DV5-1025el with an AMD Turion ZM-80, Ati Radeon HD3450, 4Gb of RAM and 250gb HDD.I got fedora 11 regularly updated, now has kernel 2.6.30.10-105.2.23.fc11, but it is used to happen also with older 2.6.30 kernels, NEVER happened with 2.6.29 kernels. Video driver isn't the cause, since it happens with both proprietary fglrx and OSS radeon drivers.
View 5 Replies
View Related
Feb 21, 2010
The title says it all.I'm not much for the command line so I really don't know how to debug this.Any help would be appreciated .It was working fine then I had some updates and now the window opens but It is just blank.deluge never fully starts.Transmission starts and I was using it for a while but it never worked as well as deluge.no where near for that matter. It was very slow and seemed to choke itself.
View 14 Replies
View Related
Apr 12, 2010
I have no idea why I can not shut down my system properly. Every time I try to shut down, it just hangs and the only thing what I can see is my wallpaper. Then I am forced to do hard shut down, holding shut down button for a few seconds. Can someone help me with this? I have to mention that month ago everything was fine. No major system changes where done till that. My F11 is all up to date. Laptop: Acer Aspire One 751H.
View 9 Replies
View Related
Jun 11, 2010
Problem with FC13 on a 64 bit box...tried to get Tor and Polipo going and at boot, the system hangs as soon as Polipo starts up. I need to adjust or delete the Polipo service but can't seem to get to any kind of a terminal either...it used to be just hit ctl-alt-and and F key and it dropped to a term. Now that's not happening. Can I do that? And...alternatively, can I force a skip of the Polipo service as it's booting?
View 2 Replies
View Related
Jul 28, 2010
Whenever I boot fedora core 13 it starts Plymouth and a txt progress bar starts at the bottom. Whenever it gets to 100% it flickers a little bit then does nothing. The system doesn't hang I can still crrl-alt-delete and it shows the processes stopping. When it displays the programs starting it gets to jexec and nothing happens.
View 1 Replies
View Related
Oct 24, 2010
After first installing Fedora on my computer, I was having a problem with my programs hanging for about 10-20 seconds, and then starting working again. After a while I discovered that every time it happened, there where some disk activity, and when the disk activity stopped, the programs started working again. The problem also occurred, when I was copying large files. Then the programs would hang until the copy was finished.After some googling around I tried to change the scheduler for SDA from cfq ro deadline, which seemed to solve the problem.
However the problem still seems to occur, if I do something that requires heavy network activity. If I copy a large file from one computer to another or download something using Vuze, all programs becomes unusable until network activity stops again. have 2 computers, which both seems to have the same problem (AMD X2 3800+ and Intel Core I5 750). They are running Fedora 12 and 13 both 64 bit. Both are using Asus motherboards with onboard LAN
View 6 Replies
View Related
Oct 30, 2010
Under GNOME, the X server hangs about every hour under regular use. When this happens, I can usually move the mouse pointer, but nothing else. I can't click anything, I can't type anything, etc. I have CTRL-ALT-Backspace configured to restart the X server, and that works if I do it before it hangs: after it hangs, that doesn't do anything. The only thing I can do right now is reboot the entire machine.How can I figure out why it is hanging? Also, can I somehow restart the X server without rebooting the entire machine?
View 2 Replies
View Related
