Server :: Warning: Group Brewbuilder Does Not Exist - Using Root
Jun 27, 2011
I am using redhat 3.0 i want to configure arp-acl mac based blocking to windows clints i have done bellow configuration but finally squd starting error is showing
#rpm -e squid warning: /etc/squid/squid.conf saved as /etc/squid/squid.conf.rpmsave
# rpm -ivh squid-2.6.STABLE6-5.el5_1.3.src.rpm
warning: squid-2.6.STABLE6-5.el5_1.3.src.rpm: V3 DSA signature: NOKEY, key ID 37017186
warning: user brewbuilder does not exist - using root
warning: group brewbuilder does not exist - using root
[code]....
View 9 Replies
ADVERTISEMENT
Mar 29, 2011
I'm running fedora 14.I want to see the source code of uname.After googling,I find a way.But a problem happens.
[Code]....
Why I got this warning. After installing coreutils-8.5-7.fc14.src.rpm,where can I see the source code of uname.
View 2 Replies
View Related
Apr 20, 2010
A bit of an oddity that I've recently run into with my storage folder in my system; it's a newly installed drive that I've set to mount at /storage. When I first tried to use it, programs that I used that attempted to write to it tossed Access Denied errors at me in their own way. Checking the permissions (at the Terminal, ls -l / | grep storage) showed that /storage was set to 'rwxrwxr--'--Owner and Group were given full read/write/execute, but Others could only read. However, my logon to my system is a member of group root. Why, then, with the above bits set, would I not be able to write to it? Changing Others permissions to rwx (and presumably rw would have worked out for me since I don't leave anything executable there) allowed me to write to it, but I don't understand why that would have been necessary. So far as I'm aware, the prior drive that was in my system--mounted at the same location--did not need this treatment.
View 7 Replies
View Related
Nov 10, 2010
User root does exist. Sendmail doesn't deliver email to local user. This is standard instalation from apt-get install. Everything worked ok since year. Everything worked ok until recently. The server worked just over a year.
View 1 Replies
View Related
Jan 19, 2010
I am triying to configure my official mail ID in Linux el5 OS. So, as I am a newbie I have searched for the same. And found that I can configure through Mozilla Thunderbird...But while installing RPM I am getting below error.
rpm -ivh thunderbird-2.0.0.21-1.el5.centos.src.rpm
warning: thunderbird-2.0.0.21-1.el5.centos.src.rpm: Header V3 DSA signature: NOKEY, key ID e8562897
1:thunderbird warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root
[Code].....
View 5 Replies
View Related
Feb 28, 2011
I have RHEL3 on of my old system.the OS is not start because the Volume group is not exist.
The single mode is not work either.the onlly shell i have is by rescue mode.and either the sysimage is not exist!should i use vgimport command?how ?I never use this command before?!?!
Part of the error that i received during start the OS is :
vgscan --ERROR "vg_read_with_pv_and_lv():current PV cant get data of volume group "vg00" from physical volume(s)
vgchange -- no volume groups found
[code]...
View 1 Replies
View Related
Oct 26, 2010
I no longer have access to my root desktop. On a session I attempted to change the root username but i apparently assigned it a wrong directory that does not exist. When I rebooted with my new root username, i was instead recognised as a simple user (no root privileges). I tried the console to change to "old" root but root password is not accepted and there is no way to access to sudoer files. it seems that inserting a new username requires root privileges and i am back to square one. Simply logging with old root username and password after restart gives me a blank screen with nothing on it and cannot even reboot.
View 9 Replies
View Related
Jan 7, 2010
When I use wvdial, most of the times on first attempt I get output like that
Quote:
[root@localhost apinder]# wvdial
--> WvDial: Internet dialer version 1.60
--> Warning: inherited section [Modem0] does not exist in wvdial.conf
--> Cannot get information for serial port.
[code]....
View 2 Replies
View Related
Feb 12, 2009
I've downloaded Ubuntu 8.10 and I have installed it within ms windows. My first problem was when I went to boot Ubuntu and the graphics weren't right so I rebooted it with a different graphic configuration and it installed successfully. When I went to boot Ubuntu a second time to actually use it I got the following error:
ALERT! /host/ubuntu/disks/root.disk does not exist. Dropping to a shell!
BusyBox v1.10.2 (Ubuntu 1:1.10.2-1ubuntu6) built-in shell (ash)
View 2 Replies
View Related
Oct 13, 2010
Just tried installing Ubuntu 10.10 from a USB device on my Windows 7 machine but something goes wrong. Far into the installation the computer restarts, asks me which operating system I want to start (it had already done this once before) and I choose Ubuntu. Then I get three alternatives:
Ubuntu, Linux 2.6.35-22-generic
Ubuntu, Linux 2.6.35-22-generic (recovery mode)
Windows 7 (loader) (on /dev/sdb1)
I pick the top choice, and get the following message:
ALERT! /host/ubuntu/disks/root.disk does not exist. Dropping to a shell.
If I start recovery-mode i get the same message. There's some text above the message that reads "new low speed USB device using ohci_hcd and address"... Could there be a problem with the usb-drive? If I remove the USB drive I get the message: Gave up waiting for root device.
View 2 Replies
View Related
Jul 4, 2011
I'm seeing on my Fedora 15 box. I want to add the superuser to a group called, say, thisgroup.thisgroup is absent. Surprisingly, when I thought of editing /etc/group, root was present there!Anyone on why groups didn't show my new addition?
View 3 Replies
View Related
Mar 23, 2010
I recently installed Ubuntu 9.10 and have been trying to set up a USB printer. I hit a problem which I eventually diagnosed as being the ownership of /dev/usb/lp0.
First, the symptom:
~$ cat Test > /dev/usb/lp0
bash: /dev/usb/lp0: Permission denied
The initial diagnosis:
~$ ls -l /dev/usb/lp0
crw-rw---- 1 root lp 180, 0 2010-03-23 21:39 /dev/usb/lp0
Notice the lp group? When I checked group properties, this group did not have any members - not even root! The default for CUPS (from the CUPS doc) is lpadmin, in any case, so not sure what lp is all about. In fact, the 'lp' group has ID=0, the same as the 'root' group.
I fixed it by doing this:
~$ sudo chown root:lpadmin /dev/usb/lp0
Then I noticed that /dev/lp0 and /dev/parport0 also had group=lp, so I also did this:
~$ sudo chown root:lpadmin /dev/lp*
~$ sudo chown root:lpadmin /dev/parport*
View 1 Replies
View Related
Nov 9, 2009
I have a question about LVM. My /dev/sda disk is partitioned into Windows NTFS on sda1, Linux /boot partition on sda2, and the Fedora 10 root (/) LVM partition is on sda3. I have moved my Windows XP to VMware on the Linux system and would like to add the sda1 partition to root LVM group.
View 7 Replies
View Related
Apr 19, 2010
I've installed BOINC for first time (from suse repos). I'm worried about running BOINC as root. How can this be avoided? I'd first like to exhaust all options with the official opensuse repo version of BOINC. If I am unsuccessful, then I'll try the version from Berkeley website.
View 13 Replies
View Related
Jan 23, 2011
I've been searching for a permanent solution for some time now, but the threads containing the same error message never seem to be about the same issue.I want to:I'm not trying anything fancy, all I want to do is open a write-protected file with gedit as root, like so:
Code:
# sudo gedit /usr/bin/deadbeef
..but every time I try, no matter the file, I get this error message:
Code:
(gedit: [process #] ): Gtk-WARNING **: cannot open display
I already know: I can circumvent this by going:
Code:
# xhost +local:root
# sudo su
# export DISPLAY=:0.0
[code].....
View 6 Replies
View Related
Sep 20, 2010
I am trying to extend my / size as its full. Well the volume group is VolGroup00 & logical volume is LogVol00 but when. I run the command vgextend VolGroup00 /dev/sda8. It says volume group not found. Can it be because I have WindowsXP in my /dev/sda1, which falls under same Volgroup??
View 1 Replies
View Related
Jan 9, 2010
According to a couple of different places, it's not possible for me to put a line in /etc/fstab to mount one of my partitions with owner and group not root; instead, I have to mount it in /etc/fstab, then chown & chgrp to my user. That seems ridiculously tedious and silly... is it true? I'm sure a short script could be written to get around it, but it seems obtuse for Linux not to allow that to be set in /etc/fstab.
View 9 Replies
View Related
May 1, 2010
After freshly installing Lucid Lynx and tinkering for some time to get everything just how I like it, I managed to somehow remove myself and all other users from all groups. Now, obviously, I've restarted and I don't have root privileges as I am no longer a member of admin group. So I am somewhat stuck. I've looked at this page: [URL]. But annoyingly, there is no grub menu appearing on boot up (unlike previous Ubuntu versions). So I'm appealing for your help to either:
a) Show me how I can bring up the grub menu so I can access ubuntu in safe mode
b) Show me another way of accessing the system with root privileges. (Would using chroot from the Live CD work? I just thought of that now so I'll try it).
View 3 Replies
View Related
Jul 31, 2011
I'm having a problem trying to customize Ubuntu 11.04 LiveCD.Everything went well until I tried to run the system updates on the LiveCD.This is the error message output:
Code:
root@lkjoel-desktop:/# sudo apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
code....
View 3 Replies
View Related
Jul 4, 2010
The normal user is now in the sudoers group. How can i allow it to install programs using it's own password rather than having to know the super-secret Root-Users password?
View 5 Replies
View Related
Jun 1, 2009
I have just configured CentOS server my new office. This is the first time I am using CentOS.
Whenever I am trying to change the webroot of the httpd server, it usually say "directory doesn't exist". whereas which can't be the case as it is home directory of the user.
To achieve this, what Do I need to do?
The second issue, I am facing that whenever I am adding new directories to public_html folder, it is not accessible. as the error page 404 is shown. I have changed the permissions to 0705 and ownership is also transferred to other user. What else is required to make new directories accessible by the web?
View 2 Replies
View Related
Oct 27, 2010
One of our client having issue with the qmail. The issue is if any one send email to abc@ourdomain.com (abc@ourdomain.com the email address which is not exist) it should send failure notification i.e."email does not exist" to the sender. The qmail server is not notifying that email address does not exist.
View 1 Replies
View Related
Apr 4, 2011
I come back to everybody cause I don't find an explicit how to do this!In our internal network, I've created an email server with Postfix and Dovecot. (Just for internal domain, no needed to go outside)
But I've some server which use linux too. All are on CentOS 5.5.I would like to configure these servers to use my internal mail server for send email, and not configure sendmail or postfix on each server.
What I've to do exactly on each servers to use it? I search on the web but I don't find something very explicit
View 3 Replies
View Related
Jan 23, 2011
But I've gotten as far as getting davfs to work on RH Linux. However, on SuSE I'm logged in as root, but when I issue the mount command I'm getting "user davfs2 does not exist". (I was getting "group davfs2 does not exist", so I created the group (groupadd davfs2) then added the user davfs2 to the new group by following the instructions at The Nerdrium : Linux : Creating Groups.
The command I'm issuing is: mount -t davfs http://.....
I get challenged for credentials, but after I enter them I get the "user davfs2 does not exist" message.
View 2 Replies
View Related
Feb 4, 2010
My test messages from one mail server to another are getting sent to my spambucket and the only error in the logs is: warning: numeric domain name in resource data of MX record for [URL]: 74.63.64.42
View 1 Replies
View Related
Jul 19, 2011
How can I create a user group that restricts Internet privileges to only members in the group, then I will assigns certain applications to join the group for access to the Internet.
For example, I want only group net to have access to the Internet. Group net is then connected to:
Code:
So far, I am using the gnome group policy manager that is standard with ubuntu but Its not working. It is possible that im misdirected and that I should use a firewall instead?
View 2 Replies
View Related
May 24, 2010
I have a text file that currently has around 150 000 usernames in it. I need to somehow group them into smaller groups of 1000 and then add that value into the DB. for example user xzy group 1 (hopefully the groups will be digits incrementing)
[Code]....
how to search for 1000 then assign them group 1 and then 1001-1999 to group 2 etc.
View 3 Replies
View Related
Oct 19, 2009
i want secondary users can able to change the files permissions of primary group?user MAC is having www as a primary and httpd as secondary group. But he want to change the file permissions (chmod) httpd group files. Is it possible or not? I think its not possible. If it`s possible then let me know how?
View 3 Replies
View Related
May 25, 2011
I've been tasked with fixing a Red Hat system that dies with a kernel panic during the boot stage:
Code:
EXT3-fserror (dev sda1): ext3_check_descriptors: Inode bitmap for group 4 not in group (block 67239937)!
EXT3-fs: group descriptors corrupted!
mount: error mounting /dev/root on /sysroot as ext3: Invalid argument
I can boot into a Rescue CD, but I'm a bit out of my element because I don't use EXT3 myself, and I've never had to repair a corrupted file system before.
View 3 Replies
View Related
Apr 22, 2009
I am trying to install Fedora on my computer and it boots fine but then comes up with an error it says"Warning : cannot find root file system"Create symlink /dev/root and then exit shell to continue the boot sequencebash:no job control in this shell bash-3.2# I am a completly new to all this so
View 3 Replies
View Related
