Server :: Can't Figure Out Where The Missing Piece Is To Close Gap?
May 11, 2011
I'm having issues getting apache to respond to requests outside of my local LAN. If I goto my server [URL].. it says connecting... but never finishes and returns anything. I'm using Ubuntu Server 10.10.
a) The DNS is working fine. It's pointed to my cable modem's IP and ping responds fine.
b) The apache server is setup and is working locally. In fact, if I use w3m and goto [URL]..I reach the test page perfectly. I can't figure out where the missing piece is to close this gap. Here are some config files to illustrate my setup:
[Code]...
View 2 Replies
ADVERTISEMENT
Feb 10, 2010
Can someone recommend piece parts construct a reliable green server?
I am thinking:
-Case with hot swapable drives, and energy efficient power supply
-SSD harddrive for 5900 RPM drive
-low power CPU, but one with a decent amount of power, IE. 2.0ghz dual core or better.
View 2 Replies
View Related
Apr 29, 2011
This is probably a really simple fix but tbh since I installed unity I'm stumped.
I didnt like the unity desktop so I've gone back to the classic desktop but I have no bar above my windows with the max/min/close option.
To add to that issue, sometimes windows open with their menus under the panel at the top of the screen so there is no way to move or close them
View 3 Replies
View Related
Mar 20, 2010
After the last daily update using 9-10, I have lost sight of my Min, Max & Close icons to all programs
How do I get these icons back & not have it happen again.
View 6 Replies
View Related
Dec 17, 2010
I recently lost my Min Max and close buttons on pretty much every window. This seemed to start when I upgraded to 10.10. I did what was told in another thread on missing task bars. I managed to get them all back except on Firefox. I tried the preferences, double clicking up there, right clicking.
View 3 Replies
View Related
Jul 19, 2009
I just had an update and after that it required a reboot. When I logged on the system there was no CLOSE, MINIMIZE, MAXIMIZE buttons on windows!
View 9 Replies
View Related
Feb 24, 2010
After a week or so i noticed that the title bar (the one with the minimise and close buttons) is missing. After a little search i found that in terminal if i type metacity --replace it would come back.And that it did.However, everytime i reboot i need to do it again.Starting to get a little annoying now.
View 3 Replies
View Related
Apr 24, 2010
as you can see in the screen shot provided i'm missing my close,minimize and maximize botton that normally suppose to be at the right hand conor of an application. this goes for all of the application and i dont know what i did for this to happen.
View 3 Replies
View Related
Apr 29, 2009
i saw a thread on here regarding this same topic a few months back but i can't seem to find it now. my problem is that in firefox, the bar at the top of the window with the minimize/maximize and close buttons is gone... i don't know how this changed, must have hit something by mistake..
View 1 Replies
View Related
Jul 22, 2009
About a month ago I upgraded from Lenny to Squeeze and everything seemed fineBut sometime between then and now I lost the maximize and close buttons (I still have the minimize)This is only a minor annoyance for me but a major one for my wife.I searched the web and some other forums but have found no help.
View 3 Replies
View Related
Jan 9, 2010
I have a pretty strange problem, when I booted the computer and logged in on Ubuntu none of the close, minimize, etc. buttons were showing up.
View 1 Replies
View Related
Sep 18, 2010
I've been using 10.04 for a few months here and installed the truglass 0.5 theme for quite some time. I've been putting up with one downfall of it, which is on certain windows the min/max/close buttons do not show. I can hover over where they should be to actually use them, but they are not visible on all windows. They always come up with firefox, unless I hit a pop-up and a new window comes up. Any nautilus window doesn't have them unless focus on that window is lost. Any ideas on how I can solve this? See attached screenshot.
View 1 Replies
View Related
Jul 29, 2011
As title states, they are missing, and from every window. I have googled this and found fixes but in doing some of the "fixes" the bar at the top of the screen disappears and docky becomes effectless.
View 7 Replies
View Related
May 3, 2011
I have installed recently a bunch of distros and settled with xubuntu 11.04 for my old laptop. Everything worked fine out of the box except some times wireless stopped working and the pc needed a restart. One of those times i restarted and because restart seemed unresponsive I clicked again but a problem tab poped up. Every time that i clicked restart, the pop up appeard I was forced to force shutdown.
1. Maximize/Minimize/Close buttons are completly missing. Even windows settings (where you can unjust those buttons) does not work. It is blank.
2. Cursor is invisible but when i click something appears , stays visible but the cursor is a different icon than before.
3. other problems as well. I cannot move terminal etc.
View 2 Replies
View Related
Mar 16, 2010
I am trying to figure out ho to setup EC2 clustering. I am seeing heartbeat as an option. I need something that will monitor the state of a daemon, and not if a daemon is running. For example, say I want httpd to be high availability. Does heartbeat monitor if httpd is not in a hung state, or does it simply do a ps -e |grep httpd? So my question is, how does heartbeat work?
View 2 Replies
View Related
Nov 6, 2010
I'm running several SHOUTcast server instances and a WowzaMediaServer instance on a CentOS machine. I'm experiencing a memory leak problem, but I can't figure out which processes are eating memory.
TOP command reports as follows:
[Code]...
Something misterious to me (I'm still a Linux newbie) is that TOP reports a total of 7.5GB used ram but very small percentage for single process (0-1%). Memory consumption starts at 1GB/8GB after reboot and in three days running gradually increases up to 8GB. I'm practising with Linux, but I still miss a lot to understand what's happening on my system. For instance, are there linux kernel logs saved somewhere that I can look at?
View 4 Replies
View Related
Jul 22, 2011
[Code]...
I think I can eliminate Media Companion as the problem since all other samba servers work with it.
I want to trouble shoot this but don't even know where to start. How do I figure out what makes OPENWRT samba server different from the other 100% working FREENAS and PC-01 Servers?
How would you go about trouble shooting this?
View 1 Replies
View Related
Nov 9, 2010
Just installed Debian 5 Lenny on my PC and found myself in front of strange problem: 3/4 of my screen is filled by graphics on default, i mean 1/4 of screen is just GREY on logon screen, and then when GNOME starts i got the lower pannel on the bottom of 3/4 of screen, but suddenly i can take it and put it on the bottom, like it should be.
same stuff with maximizng the windows. when i maximize by just pressing one of those right-top buttons - it just fills 3/4 of screen. but if i maximize it by hands at first and THEN press the button - everything feels great.
something inside me says that i should post xorg.conf
[Code].....
View 1 Replies
View Related
Jun 10, 2011
We have the need to install an older Linux distribution (Suse 10) on a brand new laptop. The kernel that comes with Suse 10 doesn't have new enough drivers for the NIC and the drive controller. We've been able to find the source code for the NIC and build a working NIC kernel module however, we can not find the source code for the drive controller outside the kernel tree. Newer kernels see the drive fine; the controller is the Intel ATA_PIIX. Its included in the kernel, the hardware we have it just newer than the version in the old suse 10 kernel supports. I've crawled all over the intel site looking for the code outside the kernel source and have been unable to do so. Is it possible to lift the code from a newer kernel source tree? Is it available for download anywhere?
Edit: (from a comment below) SLED-10-SP2-x86 is the OS. The installation of these systems in an automated process, trying to change the process to include a VM (if we had the memory) or install a different base OS; while doable- can't be done in the time allowed. To get through process development, testing, UAT, staging and deployment takes much longer than the time we have. The old laptop had this same issue and the fix by my predecessor was building the NIC and drive modules by hand. We need to simply update those modules for this new laptop
View 3 Replies
View Related
Nov 30, 2010
I recently built myself a backup computer/file server running Fedora 14, and I'm trying to install the NVidia driver. For some reason, I can't seem to switch to console mode to save my f'ing life! Ctrl+Alt+F1 does nothing, as does the terminal command init 3. Seriously, I can't figure out for the life of me what could be causing this issue.
View 5 Replies
View Related
Dec 4, 2010
So, I usually write/find a test case generator for any code that I write. This type of code generally leads to some file output. To be thorough, I try and generate many different files to test my code on.
Say the command is like this:
Is there a way to automate this for many different values of the parameters and generate many different files?
I tried:
I wasn't able to use the $i in the filename, and without it the command gave me no errors, but did nothing else either. I know the Unix command line is very powerful, and I have a feeling that this should be possible, but I just don't know how to do it.
View 3 Replies
View Related
Apr 7, 2011
I'm still a but confused about the standard way of removing it for left-associative operators: [URL] Especially about how to construct an AST from it by executing a peice of code for every nonterminal matched. And I'm still not totally convinced that it will be left-associative, I just barely understand it. Also, how would you remove left-recursion for something like this:
Code:
expr ::= expr "(" param_list ")"
| other stuff...?
View 8 Replies
View Related
Oct 3, 2009
I've just had a log email sent from the server box and it seems Somebody's trying to gain access to the server via ssh
sshd:
Authentication Failures:
root (210.38.xxx.xx): 16 Time(s)
unknown (210.38.xxx.xx): 7 Time(s)
Invalid Users:
Unknown Account: 7 Time(s)
& it seems that it's somebody who's at Zhanjiang Ocean University in china I've got the firewall enabled, but how do u set up rules to stealth the server's IP address to make it invisible & disable ssh so only I can log into the server to fix any problems (eithernet cable) not over the net
[Code]...
View 1 Replies
View Related
Dec 1, 2009
Does fedoraproject close its official rsync server? Or I did the wrong way?
View 1 Replies
View Related
Jul 18, 2010
I am trying to create an usb install from an gnome-live cd. All I have done is not working:
dd
fedora liveusb-creator
fusbi
linuxlive usb creator
unetbootin
pendrive
All I can get are errors saying cang find kernel or error like that. I have used linux and windows environment. The iso I am using is fine, I am sure because I have instaled it on two pcs. Iso gnome-live >> usb (bootable to install)
View 1 Replies
View Related
Apr 9, 2010
Really love Ubuntu and want to upgrade to lucid when it comes out (currently using jaunty) as i have heard nothing but good about it. My problem is i did try karmic but one big thing that put me off was the Ubuntu software center and the fact that i could only install one piece of software at a time. This is very annoying as i use a lot of software. When i reinstall a system i like to be able to choose everything i use, install, sit back and have it done in one go.
View 4 Replies
View Related
Feb 22, 2011
I am trying to get this piece of hardware to connect to my computer. I got it to recognize it through NDISWrapper, or at least it says that it is there, but when i use lspci i dont even see it on the list. It shows the internal wireless card, which is a broadcom pile of garbage, and thus the reason i have bought this card. There are two lights on the card, neither one lights up, so it isnt even registering that it is getting power as that is what one of the lights is. I honestly dont have the slightest idea where to go from here.
View 3 Replies
View Related
Apr 8, 2010
If I rpm -U a .rpm file, and it starts spitting out "need this library" and that library etc., what do I do after that to get hold of those libraries and make the software work?Do I have to run ldconfig after getting those packages? Exactly what does ldconfig do?
View 14 Replies
View Related
Apr 29, 2011
I'm attempting to put together a 'nice' front-end for a set of image deployment scripts I've written. I'm running in to two different issues that I'm sure are related, but I can't quite figure out what the cause is. I am populating a variable with information from several text files to form my tag, string and default state for a dialog statement...
Code:
for dir in /tmp/apps/* ; do
APPMENU="$APPMENU $(echo $dir | sed 's//tmp/apps///') $(cat $dir/info)"
An example of the contents of /tmp/apps/office/info:
Code:
'Microsoft Office Enterprise' 'on'
The result of echo $APPMENU:
[Code]...
Does anyone have any idea what I should check for? Is there's a specific quoting method I need? In a Bash script I'm pulling quoted text from a file with cat then writing that same string (hopefully quoted!) to a variable. I have a single set of hard quotes (') in my text files presently.
View 1 Replies
View Related
Jan 31, 2011
I have a Red Had EL5 server. Free -m shows total mem: 3042 and used mem: 2903. However, when I run a top or ps, there's barely anything using any memory. how I can identify what is using all this memory?
View 2 Replies
View Related
