I don't know what i have done by mistake.
[root@server1 ~]# su - user
su: warning: cannot change directory to /home/user: Permission denied
-bash: /home/user/.bash_profile: Permission denied
-bash-3.2$ cd ~
-bash: cd: /home/user: Permission denied
-bash-3.2$
I see this questioned asked a lot and figured this tutorialThis tutorial explains how to create an SFTP server which confines (or chroot) users to their own home directory and deny them shell access.
View 1 Replies View RelatedIs there anything special about a home directory before users' home directories are stored there, or is just as typical as any other "empty" folder?Let me just cut to the chase, but please no ear ringing about the folly of messing around as root, particularly with directories at root level. I know it's considered stupidity, but I deleted my home directory.
Is there an easy way to restore a working home directory? I tried copying /etc/skel under root, but I'm not sure what a home directory should look like once it has been restored. Besides . & .., there were .screenrc & .xsession in my home directory when I copied /etc/skel. Are these files suppose to be in "/home" or "/home/~" or both?
I have two partitions on my HD partition1 mount point / and partition2 mount point /home. I had ubuntu 11.04 32bit installed and wanted to switch to 64bit so i reinstalled ubuntu and chose the same boot points. Since i reinstalled i had to create a new user and it created a new home folder. Now i want to replace my current users home folder with the previous home folder i had.Would a simple rename work?
View 2 Replies View RelatedI have a box with multiple users on it and I want everyone to be able to have full access to their home folders, but not be able to see the contents of /home/ or another user's home folder (I.E. bob has full access to /home/bob but cannot access or even see the contents of /home/john)Right now users can see other user's home folders but can't modify what's inside. How do I prevent them from seeing the contents at all?
View 1 Replies View Relatedhow to change when running command "adduser" or "useradd" the placement of the users home directory. Have tried editing the /etc/default/useradd file with no results.
I want it to be placed in /var/www And I would also want to know how more folders and files can be created in the home directory automatically.
CentOS 5.5
I am trying to add new users, when I use the command: # useradd newuser
I get: useradd: cannot create directory /home/users/newuser
I went to my /etc/skel and when I use the command ls it displays:
home
and when I go into /etc/skel/home I have the two directories that I created.
I am logged in as root, and when I ls cd / it shows /home, when I cd into /home everything looks normal.
How do I get this error to stop so I can add new users?
I've created other users in my machine. now I want to add all my home directory contents and settings to the home directory of other users. how can i do that? Can I do it from /etc/skel directory?
View 1 Replies View RelatedI need to add another user besides the one set up during the installation procedure but I also need to limit all users to use only their own /home/user directory.
View 4 Replies View RelatedI have an SFTP server using OpenSSH on a server running Fedora 12. I want to chroot my sftponly users into their home directory but I want to let them have write access to their upload/ folder. Right now users can log in and view & download items, but for some reason I can't get write access to work. Here's some info:
username: testuser
group: sftponly
from /etc/passwd:
testuser:x:501:501::/home/testuser/:/bin/false
[code]...
As I regularly move between Mac and PC, I thought it would be a good idea to put all my data on an external drive. As Windows 7 and OS X have similar home folder layouts, I just simply put all the folders I need for both on the root of the external drive and changed a few settings so that the Home folder for my user is on the external drive on both Windows and OS X.
Whilst Ubuntu also has a similar structure, I cannot work out how to have it so that my users home folder is on the external drive. I have done a little research and all I can find is how to have the /home directory on another partition. a) this is not what I'm trying to do, just the folder for my user and b) this would mean formatting the external drive to extX format, which just wouldn't work for me.
I am using 9.10 (or will be once the upgrade is complete)
I am using 10.04 ubuntu server. I configured the ldap server. I configure the client machine to contact the ldap server for authentication. But if i tried to ssh john@localhost, it says could not chdir to home directory /home/john: no such file or directory.
View 1 Replies View RelatedI have to create a script to identify those users who have un-sanctioned (forbidden) files in their home directory. I tried something like this (this is a try and I need some opinions):
Code: #!/bin/bash
user_belongs() {
if `groups $var1 | grep $var2`
then
return 0 else
return 1
fi
} .....
How can I allow normal users to mount a tmpfs under any subdirectory owned by them?
View 3 Replies View RelatedI have an interdependent collection of scripts in my ~/bin directory as well as a developed ~/.vim directory and some other libraries and such in other subdirectories. I've been versioning all of this using git, and have realized that it would be potentially very easy and useful to do development and testing of new and existing scripts, vim plugins, etc. using a cloned repo, and then pull the working code into my actual home directory with a merge.
The easiest way to do this would seem to be to just change & export $HOME, eg
cd ~/testing; git clone ~ home
export HOME=~/testing/home
cd ~
screen -S testing-home
# start vim, write/revise plugins, edit scripts, etc.
# test revisions
However since I've never tried this before I'm concerned that some programs, environment variables, etc., may end up using my actual home directory instead of the exported one. Is this a viable strategy? Are there just a few outliers that I should be careful about?
How can i chroot group of users to thier home directories and they have ssh access on RHEL 5.5 .. i tried many tuts but it was about chroot services.
View 2 Replies View RelatedI'm testing a Debian Lenny virtual machine to simulate my ideal setup for FTP server (with vsftpd): I want all internal users (corporation users with Active Directory accounts) to ftp into the same directory (i.e. /var/FTP/AD-DOMAIN/) and external users (customers) to ftp into their home directories (created manually on request).
I added user_config_dir=/etc/vsftpd_user_conf option in /etc/vsftpd.conf file and I've created /etc/vsftpd_user_conf/domain-user1 with local_root=/var/FTP/AD-DOMAIN
I have setup vsftp so I can ftp with every external and internal user chrooted and is working properly. AD validation for internal users and "normal" validation (via /etc/passwd) for external users work perfect.
I can FTP this server into /var/FTP/AD-DOMAIN with any AD user with its home directory created (i.e. /home/AD-DOMAIN/domain-user1/) but if I try to ftp with any AD user without its home directory created I get the error "500 OOPS: cannot change directory:/home/AD-DOMAIN/domain-user2"
I have found some references (http://wiki.flexion.org/FtpServer.html and http://howto.gumph.org/content/setup...ies-in-vsftpd/) about vsftp PAM authentication so I would supposedly get rid of the error message and the user would log into /var/FTP/AD-DOMAIN without problems, but I can't figure out how to setup my FTP server.
I did useradd -g users ldaptest and tried logging in remotely but the client always says no such user. what do I have to do to update the users that LDAP sees?
View 2 Replies View RelatedOS: CentOS 5.3
vsftpd ver: vsftpd-2.0.5-12.el5_3.1
I installed vsftpd server in one of my servers using "yum install vsftpd" command. NFS server is running in the other server and mounted as "/data" in this FTP server. root in FTP server has also root authority in NFS server. All the files and sub-folders under "/data" in FTP server have 755 or 766 mode. Even I modified vsftpd setting to allow root login.
When I login as root to FTP server with FileZilla client, I can see all the file list in root home directory and move to /data directory. I can download any file in a local HDD but I can not download any file in /data directory.
Using CentOS 5.5. I have a handful of users that I need to have connect to my server via sftp and start in the same directory. for example, user1, user2, user3, etc.. will connect via sftp and upon connection will all be in the /some/dir/path/ftp-root directory.I know one way is to create these users all with the same 'home' directory, since by default a user starts in their home directory when connecting via sftp, but before just doing that, I wanted to find out if that is really the appropriate method to use? alternatives? Is there some setting on the sftp server end that could direct all users to one starting directory so that these users don't have to have the same 'home' dir? I'm using the sshd daemon that comes with CentOS 5.5 (with all current updates/patches)
View 4 Replies View RelatedI have RHEL5 with apache installed and running. I have a directory off of / called software that I would like to have show up as a directory listing so if I go to [URL] I get the directory listing. I have tried searching around and nothing seems to work for me. So out of the box how do I get this to work? My server properly resolves to [URL] so I am good there.
View 8 Replies View RelatedI want to create a shared folder in a ubuntu sistem but I want to know if I can get access to some users of my domain active directory windows 2003 server?If I can, I would give that security in some of the subfolders of that shared folder as explained at the example:XAMPLE:
Backups (all have access and it's shared)
Mail of Charles (Can only have access Charles that have an account on domain)
Mail of John (Can only have access John)
[code]...
I have running windows 2008 active directory. need to login ad users to linux system, which is inside the windows domain
View 3 Replies View RelatedI have set up an NFS server on Fedora 13, and I am connecting to it with Fedora 13 and Ubuntu 10.
On both clients the command
Code:
works fine. On Fedora I can get into the directory with Nautilus and have read/write permissions as specified in /etc/exports on the server, but on Ubuntu I can only get into it from a sudo'd command line.
The ownership of the file on Fedora is "nobody" and on Ubuntu it's "user #500", with only people in the "500" group having access to it.
Obviously the permissions can't be changed on the client, but with the Fedora box being able to read/write to it with no problems I'm not sure what else I can do on the server to let normal users on the Ubuntu box read it.
I have a server running Ubuntu server edition with SMB server all set up and running. I've set up the main root of the drive to be shared and I've set up a user in /etc/samba/smbusers to say root = "joeflood" so I can sign in as root using the username "joeflood". This works and I have read/write access to the filesystem (yay!). However, if I browse to /home/javawag (my main user home directory), I no longer have write permissions! I can see all the files in there and read them no problem, but writing is a no-go. I'm logged in as root though?! Btw, I can login via SSH and create folders/etc as root in the /home/javawag folder, and they showed up in the SMB mount on my mac too.
View 1 Replies View RelatedI have an NFS mount on the NIS client that I want to use as the home directory for all NIS users logging in, but I also want to retain the original /home directory for system users and root on the same client.The NFS mount is /nishome, and when I defined the NIS user on the the NIS server, I identified this mountpoint as the NIS users' home directory. This same NFS mount is mounted on the NIS server as well.
View 4 Replies View RelatedI want to change the the user and group of user kumata as kumara,but not getting change by using the below command. #chown -R kumara:kumara kumara
Getting using doesn't exist.
For reference find the below output.
[root@xyz ~]# /usr/bin/getent passwd | grep mathurr
mathurr:x:12271:12271:Mathur, Rajat X:/home/mathurr:/bin/bash
[root@xyz ~]# /usr/bin/getent passwd | grep kumara
kumara:x:12102:12102:Kumar, Abhishek X:/home/kumara:/bin/bash
[Code].....
We are trying to set up a classroom training environment where our SIG can hold classes for prospective converts from Microsoft/Mac. The ten machines will have /home/student01..10 and /home/linsig01..10 as users. We want /home/student01 to be able to explore and sudo so they can learn to administer their personal machines at home. We don't want them to be able to modify (sudo) /home/linsig01. I've seen the tutorial on Access Control Lists but I'd like other input so we get it right the first time.
View 3 Replies View Relatedis /home/Local_Data a directory located on your PC, or on a server? and how can we know that?
View 3 Replies View RelatedI am using NIS and I want to replace this with 389 ds. I have installed 389 ds and configured it. I could create user account from 389-console. But it does not create user home directory. Do I have to create user account and user home directory in linux first?
View 1 Replies View Related