Server :: Server Restarts On His Own ?

Oct 7, 2010

I have a problem with one a server installed with Debian 3.1, that is restarting almost every day at the same hour, 6,25 AM. Here are the messages obtained with #cerberus:/etc# grep -C 5 restart /var/log/messages

.....missing displays....

.....missing displays....

As I said, there are days when the system is not restarting, but more often it does. For example, on 6th October it didn't restart, but on 7th it did, and the messages are the same.

View 11 Replies


ADVERTISEMENT

Ubuntu Servers :: Server Restarts When It Wants?

Jul 12, 2010

I'm currently using ubuntu desktop 9.10 (without desktop - I've removed packages) as OS on my server.But there's going on some strange thing ... There are about 8 users, and the thing is they many times user rar or some other disk-demanding programs. What I've noticed is that sometimes server will go with load over 20 (I know that's not good ...) and it will come down in few minutes and everything is OK, but sometimes it just restarts itself. I would like to disable that so it won't restart

View 9 Replies View Related

Ubuntu Servers :: Server Restarts Continuously?

Jan 31, 2010

Recently, I updated the kernel to the latest version and also installed Ruby and the Passenger module for Apache. The server was fine for a few days.However, today, it's been restarting randomly (usually a minute after I can log in).I tried booting with recover mode so I could view the logs for a longer period of time, but that caused it to restart before even allowing me to log in. Now, all boot modes will just cause the server to restart right after the GRUB messages appear.Our server setup complicates things. We have a RAID-1 mirroring for the /boot partition and a RAID-5 (software) for the / partition

View 1 Replies View Related

Ubuntu Servers :: Server Restarts Randomly?

Jul 2, 2011

I`m using Ubuntu Server 10.10. The system randomly restarts each day.Here are the logs: http://paste2.org/p/1499309Everything seems normal except that UDP: short packet thingy but even Google didn`t help me to find what`s thatBy the way, I think reboots started after I configured this PC as a gateway between internet and my local network

View 2 Replies View Related

Red Hat / Fedora :: My Virtal Server Automatically Restarts

Sep 2, 2010

This is my first message. I manage a Virtual Web Server(provider Dattatec).

The problem is that the server automatically restarts... in /var/log/messages, i don't see any message:


I ask mi provider, and says that is because is out of memory... How can i check this? How can i know why my server restarts ?

View 5 Replies View Related

Debian :: Alt+Ctrl+F1 Restarts X Server - No Virtual Console

Feb 8, 2010

I installed latest stable debian lenny. However when I want to switch to a virtual console by pressing Alt+Ctrl+F(1-6) the X server is restarted and I get the gdm login screen. When I kill gdm, virtual console switching works fine. How to switch a to a terminal and return to my X session by pressing Alt+Ctrl+F7?

View 10 Replies View Related

General :: If Server Restarts Does Information In Iptables Get Lost?

Aug 9, 2009

If the server restarts, does the information in iptables get lost? I have seen a number of pages where people recommend readding lines or creating bash scripts to get it to work again. What about files like squid.conf, ncsa_auth files, etc.?

View 10 Replies View Related

General :: Crontab Saved In Case Of Server Restarts?

Aug 10, 2009

Is the crontab saved in case of server restarts?

View 2 Replies View Related

General :: OpenSSH Server Restarts Twice When Booting - Ubuntu 9.10

Mar 20, 2010

Changes I've made to the config files:

Connecting with PuTTy works fine with my public/private keys. But why does sshd start and then restart twice when booting? I tried looking in the logfiles under /var/log/ for anything with ssh/sshd but nothing shows up.

Ubuntu Server 9.10

View 6 Replies View Related

Fedora Networking :: Automount A Nfs Share When The Server Machine Restarts?

Mar 16, 2010

I'm making a clever backupsystem based on nfs and rsync.Basically, I export folders from the clients to a backup server, and the backup server processes them and makes backups.The backupserver mounts the folders during startup, but if a client restarts, then I guess it would unmount from my backupserver, right?What can I do to make it automount the folder whenever the client gets back up again?All the clients are static servers without much interferance, without any risk of external people tampering with them and without internet access. Security is not an issue, and any kind of shady compromisingcripts will do.However, installing software on them is tricky as I have to download packet for packet and transfer them via usb manually.

View 9 Replies View Related

Ubuntu :: Run From Cron Shutdown Command Restarts Server Instead Of Shutting It Down?

Jan 4, 2010

I want my server to automatically shutdown at 23:59 and startup at 8:00. The startup is handled through by bios but the shutdown is to be managed through cron. I thought I had this working, I actually swear I had it working because I thought the uptime command showed the appropriate uptime. I happened to be up and was streaming a movie from my server when at the time it should've shutdown it actually just restarted. If I run the shutdown -h now command by itself it works well but the scheduled command just restarts the server. Here is the what is shown when I enter crontab -e.

View 9 Replies View Related

Server :: Ubuntu And Bind - Named Log File Is Not Logging Info After Syslogd Restarts

May 7, 2009

Ubuntu ver 8.04.1 and Bind ver 9.4.2

I've set this up as a primary dns server, Bind is the only thing running on it, no gui, etc. I followed the default settings so I have a named.conf, named.conf.options, and named.conf.local file.

I have a log file I labeled as named.log in this path /var/log/bind. I'm using logrotate to rotate out the file.

My problem is that after syslogd restarts in the morning. My named.log file don't start logging info until I restart Bind. The new named.log file gets created and the old files rotate out and compress. All of the other log files in /var/log, syslog, messages, mail, etc, rotate out and compress like they should, after syslogd restarts.

I know that I could restart Bind using Cron but I shouldn't have to.

Below are snips of the files I'm using.

I named this one 'bind' and it's in the directory /etc/logrotate.d

View 8 Replies View Related

Debian :: Installed With Debian 3.1 - Server Restarts On His Own

Oct 8, 2010

I have a problem with one a server installed with Debian 3.1, that is restarting almost every day at the same hour, 6,25 AM. Here are the messages obtained with #cerberus:/etc# grep -C 5 restart /var/log/messages

.....missing displays....

.....missing displays....

.....missing displays....

As I said, there are days when the system is not restarting, but more often it does. For example, on 6th and 8th October it didn't restart, but on 7th it did, and the messages are the same.

View 1 Replies View Related

Server :: Server Configuration For Small Office Server, Which Smtp, Pop Imap Server And Backup?

Apr 2, 2010

I have installed a linux server in my office to run 16 machines. Its main use will be a internal mail server but will be also running websites.

I have installed Ubuntu 9.10 server x64 and have got apache running.

I am looking for the simplest more robust solution for smtp, pop3 and imap. I have only ever used qmail before and found it a pain to configure and its getting old so I though I should probably try something new. I have not much experience with running pop3 or imap on linux so would love a suggestion on that.

View 4 Replies View Related

Server :: Create A Webhost On An Running Fedora Server Which Runs Multiple Webpages + A Coldfusion Server?

Sep 29, 2010

have to create a webhost on an running fedora server which runs multiple webpages + a coldfusion serveri have to add an coldfusion virtual host to these.what i would do:*crate a new user & group*enter vhosts.conf and copy an existing host and modify it for the new one.*create an new folder and copy the main files (phpstarter and webroot) *chown the files for the right useri think an apache graceful would be needet

View 1 Replies View Related

Server :: Minimum Partition Size Required In Redhat Linux Server For DNS Server Configuration?

May 5, 2011

Right now i have a HP DL 180 Server with 130 Gb Hard Disk & 8 Gb ram after Raiding0+1. i want to configure Domain Controller Server for my office for 200 to 300 Users. what should the partition size must be mentioned in my 130 Gb Hard Disk, is that going to be Sufficient for ME ?

i am bit confused about /Usr /Var /Boot partitions, as i need to manage perfectly in 130 GB

if i go with 4 Gb swap and remaining for " / " is that will be fine ? should i need to specify partition sizes separately for / tmp /var / usr ..

View 3 Replies View Related

Server :: Server Slow : Apache Mysql Fine Tuning Server For Faster And More Responsive?

Apr 21, 2011

I'm running a linux cloud server with the following config
1.2ghz Processor allocation
752MB Ram

The site loads slow and clicking a link almost freezes the page for a second. Also, the page loads could be much faster. We've been running mysqltuner and have pretty much optimized all slow queries. Is there anything we can do to fine tune the server for faster and more responsive?

Httpd.conf

Timeout 20
KeepAlive Off
MaxKeepAliveRequests 100
KeepAliveTimeout 5
<IfModule prefork.c>
code....

View 2 Replies View Related

Server :: Sync File Server Data Into Backup Server Machine By Command- Rsync -avu?

Jun 21, 2011

iam trying to sync file server data into backup server machine by command- rsync -avu path/of/data ipaddress-of-backup-server:/path/where/to/save after running it ask for root password and manually it is successful.but i want to make it automatic.for that i also tried cronjob and also generated authentication key but iam not successful in login automatically..anybody know how to authenticate root to login for storing data in backup server.

View 14 Replies View Related

Debian Configuration :: Install A Multi-core System And Configure It To Run Several VMs, One Each For A Firewall, A Caching Proxy Server, A Mail Server, A Web Server?

Jan 25, 2011

I will be relocating to a permanent residence sometime in the next year or two. I've recently begun thinking about the best way to implement a home-based network. It occurred to me that the most elegant solution might be the use of VM technology to eliminate as much hardware and wiring as possible.My thinking is this: Install a multi-core system and configure it to run several VMs, one each for a firewall, a caching proxy server, a mail server, a web server. Additionally, I would like to run 2-4 VMs as remote (RDP)workstations, using diskless workstations to boot the VMs over powerline ethernet.The latest powerline technology (available later this year) will allow multiple devices on a residential circuit operating at near gigabit speed, just like legacy wired networks.

In theory, the above would allow me to consolidate everything but the disklessworkstations on a single server and eliminate all wired (and wireless) connections except the broadband connection to the Internet and the cabling to the nearest power outlets. It appears technically possible, but I'm not sure about the various virtual connections among VMs. In theory, each VM should be able to communicate with the other as if it was on the same network via the server data bus, but what about setting up firewall zones? Any internal I/O bandwidth bottlenecks? Any other potential "gotchas", caveats, issues? (Other than the obvious requirement of having enough CPU and RAM).Any thoughts or observations welcome, especially if they are from real world experience in a VM environment. BTW--in case you're wondering why I'm posting here, it's because I run Debian on all my workstations/servers (running VirtualBox as a VM for Windows XP on one workstation).

View 14 Replies View Related

Server :: Configure Internal Zimbra Server To Use External Server To Send Mails?

Feb 16, 2010

I have got a running mail server on CentOS5.4 Final using Zimbra free edition. . Assume that domain is organization.com.local And it is running fine with users created and bugzilla running on the same machine can send mails using this server. But it can obviously send messages to the internal users. There is this option to configure it to use external mail server to send mails outside the network but my external smtp server needs an authentication.Is it possible to configure it this way to use my external server to send mails from internal domain to say gmail?

View 15 Replies View Related

Server :: Phpsite Not Showing Images (buttons) Home Server For Game Server?

Jan 6, 2011

i recently installed apache2 mysql php exc. to run a realtime stat site for my servers.the only thing is that the buttons/ images are not showing up.i checked that my GD was up to date and installed perl5 GD. dont know what else to check.my site with problems go to:http://24.20.177.228/stats_public

View 2 Replies View Related

Server :: Server Status Command Output Getting Dumped To Smtp Server Instead Of A File?

May 24, 2010

I am working on linux server with below specifications.Linux EDT 2008 i686 i686 i386 GNU/LinuxWhile checking the status of the server using the command 'opmnctl status' and when server is down the output is not getting redirected to file.I m using the command as,opmnctl status > abc.txt.

View 2 Replies View Related

CentOS 5 Server :: Automation Of Ftp Server \ Configure A FTP Server Where Upload And Download Files?

Jan 8, 2011

i have been trying to complete the following project1) Configure a FTP server where we can upload and download files.........2) server must run at 9 pm & stop at 9 am automatically ............although the first task was easy ,i have no idea how to accomplish the 2nd task(not to mention I'm a new user)

View 5 Replies View Related

Networking :: Hide The IP Of Y Server Want X Server To Be As VNC Proxy And Redirect All VNC Sessions To Y Server

Aug 21, 2010

I've two internet based server ( xx.xx.xx.xx and yy.yy.yy.yy ) The Y server is running VNC server and is responsible for answering to VNC sessions. But I need to hide the IP of Y server so I want X server to be as VNC Proxy and redirect all VNC sessions to Y server.

I guess the best way is to use iptables but actually I can't get it working so

View 4 Replies View Related

Server :: Setup RAID 1 On CentOS 5 Server For A Zimbra Email Server

Feb 7, 2011

I'm trying to setup RAID 1 on a CentOS 5 server for a zimbra email server.I get a partion schema error. Can I do this?The server is a HP Proliant ML150 G3 server with two 80GB HDD.

View 1 Replies View Related

Server :: Configure Redhat Enterprise Server 4 As Router And Proxy Server

May 18, 2010

Im new in linux i want to configure my redhat machine as both router and transparent proxy!

View 1 Replies View Related

Server :: Error - Server Can't Find 254.0.168.192.in-addr.arpa - SERVFAIL - In Dns Server

Jan 9, 2011

uslookup command is giving me an error.otherwise dns is working ok.when i try to look for server from client using.

Code:

I got the following error :-

Code:

But

Quote:

Is working fine.

I think there should be problem in reverse zone file so i am posting my reverse zone file.

Code:

What is meaning of this error?

View 14 Replies View Related

Server :: Fuzzing - Buffer Overflow - Ability Server - Could Not Connect To FTP Server?

May 29, 2011

i am trying to send malformed string into ability ftp server in order to have some unexpected crashes. i login in into the ability ftp server on my window 7.On my virtual machine,i am working on a backtrack 4, i tried to send some string to have some unexpected crashes, but i couldn't success.here is the code:

PHP Code:
#!/usr/bin/python
import socket

[code]...

View 14 Replies View Related

Server :: Configure Email Server In Cloud Server Environment?

Jun 15, 2011

I have installed the Apache, PHP and MYSQL in the rackspace cloud server environment. Can anyone please guide me How can I configure email server in that with postfix or some other with multiple domain.

View 3 Replies View Related

Server :: Http Server In Red Hat 6 - Extend Web Server Through Virtual Hosting?

Aug 17, 2011

how do i able to allow some users that are able to create content in directory of http server. For example: i have configured a web server which have default document root /var/www/html, now i want to extend my web server through virtual hosting , i have enable virtual hosting, but i want that user sumit is able to create content in /var/www/html/secret. which is the document root for my virtual site?

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved