Would Suse run well on Dell E1705 laptop? I am currently running Ubuntu 9.10 and it's OK except it's buggy as h3ll when it comes to sound issues. Have been troubleshooting for months to no avail and ready to try another Distro.
View 1 RepliesI installed Ubuntu onto my computer, and after awhile i decided to completely delete my windows side, so i turned around and installed ubuntu fully and formatted the whole hard drive, what happened was after i did that, it said failing reallocated sector count. I poked my father who has a degree in computers, and said i had to defrag or reformat the hard drive, now both sound crazy to me, but if he said i should jump off a cliff, i would salute him and say right away sir. So after looking up how to defrag it, found out it didn't need defragging, i turned around, backed up my personal files, and tried to put the ubuntu disks...
found out it didn't want to run from disk, so i told my dad, he said pop in the repair disk for it. I replied that I didn't have one, he asked if i had any repair disks, I told him i had an acer 2420 repair disk. He said that would work, I tried it, it installed everything after a few minor issues saying it needed to reformat the drive. So i followed the step by step directions of the disk, and it did what it would do. Now, I boot it up, and it's still running on the ext3 format and it now says
[Code]....
This is what I get w/ lsusb:
linus:~ # lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
I am new to linux . i am trying to install SUSE linux 10 SLES. all the steps are clearly installed but. the final step- Hardware configuration step failed.in this final stage system takes more time and restarts.
View 2 Replies View RelatedI intend to re-install open suse 11.2, 32-bit. On a previous install,suse did not provide a grub entry for ubuntu.My current setup has
ubuntu/root on /dev/sda6
ubuntu/home on /dev/sda7
ubuntu/usr/local on /dev/sda8
[code]...
I've got several language multimedia CD-Rom's, made for Windows 95/98/98 SE and 2000, that I'm using by means of my daughter's old PC (Win 98 SE O.S.). However I noticed, also, that you can perfectly use them even with Windows Vista. What I'd like to know is if you can use them even with Suse/Novell and (why not?) OpenSuse Linux.
View 4 Replies View RelatedOK... I tried everything i could think of... but i still cannot get my Open SUSE 11.1 to mount my samba share at boot! I still don't understand the 11.1 boot sequence. can NE one help me... tell me what files to give you output from... Ty guys P.S. My shares originate from a Windows Server 2003 RC2 machine, and it's dns server doesn't work correctly... so my mount command is
mount -t //192.168.x.x/files/ /nET/ -o username=linux,password=xxxxxx
please let me know what other info you need... I don't have the internet, so it will be tommorow b4 i see this again!!! Thanks
When i am adding a user using "useradd -d /home/test test" or "useradd test", it is now creating the home directory, whereas when i am using the graphical mode and going through several menu options, i am getting the home directory.
View 1 Replies View Relatedhow to install a D-Link Access Point on Suse 11.0 or steer me toward documentation that will do that? I configured the device on XP following instruction from this forum and the AP configured perfectly.The AP is plugged directly into the network port on the computer. It *should* function correctly without a router. I tried a restart and Suse has no idea it's there. The computer is currently configured for a wired connection which needs to be changed. The computer itself is going to be used as a small home storage server.
View 3 Replies View RelatedI have a disturbing problem with my monitor which goes to sleep (or ??) after few minutes if my comp is not used and most of the time I have to restart my comp.I disabled everything in Powersave , but nothing. I did have that problem in previous versions of SUSE, but somehow, I solved that. I cant remember what I did then.
View 4 Replies View RelatedI've pre-partitioned my HDD and want to install 11.2 on the second primary partition.However, when using the installer, I can't get Suse to install on the prepared 20gb partition - it keeps insisting it wants to install on the large unallocated section of the drive.
I find the partitioner somewhat hard to use and the answer may be staring me in the face but I can't see it.
I tried to use different version of Python, and followed the Readme like this
./configure
make
make test
[code]...
PackageKit Error repo-not-available: File '/repodata/repomd.xml' not found on medium 'http://download.opensuse.org/repositories/KDE:/KDE4:/Community/openSUSE_11.2/' My 11.2 won't update and gives this error. Anyone know how to fix it?
View 2 Replies View RelatedNew Suse 11.3 installation with Gnome desktop. Added K3B using Yast2, and after completing the install of K3B, there is no icon for K3B! Instead there is an "X" and the text for K3B in it.From the main menu -> more applications -> multimedia, is where the K3B icon is.Yast2 is supposed to install any dependencies needed or warn if it can not find any missing dependencies. What is missing, or is it a permission problem? All the other application icons seem fine.
View 4 Replies View RelatedThe software use to work well here, but now I got this when I try to run it
sparky: error while loading shared libraries: libtk8.4.so: cannot open shared object file: No such file or directory
But I can not find it.
I also tried
cd /usr/lib
ln -s libtk8.4.so libtk.so.0
ln -s libtcl8.4.so libtcl.so.0
but this does not work neither.
I am using a dell laptop which has Dell 1397 802.11B/G Wireless Mini Card. I not able to connect to internet and was not able to detect what actual problem is weather card is not supported (i.e. drivers are not available) .
Also, if any one can point to exact process to connect to wireless Lan using fedora12.
I have been searching for 2 days and cannot find an answer. Apparently Sax2 isn't available in 11.3. It looks as if many are having the same difficulty. I've tried xrandr and tried to edit /etc/X11/Xorg.conf with no success.Copying a working xorg conf file might be a fix, I don't know.
View 8 Replies View RelatedI use Termlite from SCO as my terminal emulator. It works on SUSe 9.3 but i can not get it working on 11.3. How do I enable the networking for this in SUSE 11.3.
View 1 Replies View Relatedto get flash 10 working. I just decided to update to 11.3. Bought a 8.0GB USB stick to copy files to. USB DISK icon on visible on Desktop. mounted on /media/USB DISK Clicking on device properties it is read only. I can change permissions but that is only temporary. Looking under my computer it is formated as vfat device name is /dev/sdb
I can't copy any files to it. Can't see in terminal even being root as well. Almost started the Partitioner in Yast but didn't want to accidently crash the system. That WOULD be my luck Can't find a way to format it via GUI interface. Can I use something like fdisk in terminal. I guess I need to format it as ext3.
I have SuSE 11 box. I notice that there's an entry in /etc/services that shows windream running on port 534. Can someone tell what is windream? I tried to google but it keeps bring up German website or something.
View 1 Replies View RelatedI bought this laptop several years ago. It had Vista. Just long enough for me to download SUSe, nuke and pave the HD and install Linux. Recently I upgraded from 1 GB to 4 GB of RAM, the maximum that is allowed given the motherboard (based on from what I am able to learn the Intel 945 chipset).
After upgrading to 4 GB, the machine (according to "My Computer") only sees 2.9 GB. I understand that under an earlier version of the BIOS that the machine would not recognize the RAM correctly. Additionally the "My Computer" page lists the display as "Intel 945GM". My problem is that I can find no Linux utility to flash the BIOS on this machine-- Toshiba only provides the BIOS included in an .exe file for either XP or Vista. I am hesitant to use the BIOS for the Intel 945 series motherboards from their site.
I accidently removed bottom panel of suse 11.1.Please be so kind to help me to get it back my bottom panel.
View 6 Replies View RelatedI am trying to connect to my network. I am dual-booting with windows 7 ultimate and that connects just fine. When I plug in my ethernet cable to the LAN adapter of the motherboard nothing happens. In the network manager it doesn't even acknowledge something has been connected (ie no eth0 or anything). I'm guessing that I don'tave a driver for it installed under linux. The adapter is the Marvell Yukon 8059 (88E8059 I think)
View 5 Replies View RelatedI am using kde and can't get rid of a gnome patch. Problem won't go away in updater applet tray or yast online update.
View 2 Replies View Relatedi am having linux suse 8.2 (i586) kernel 2.4.20-4gb-athlon (tty1). when i start my pc there is a window comeing asking me option like linux floppy linux - safe settings. on selecting linux suse runs and get halt with a message Welcome to suse linux 8.2 (i586) kernel 2.4.20-4gb-athlon (tty1. below that another message as(none) login : asking for login when i put my login i have again this message Welcome to suse linux 8.2 (i586) kernel 2.4.20-4gb-athlon (tty1. below that another message as(none) login : asking for login what should i do i cannot start my Suse operating software.
View 3 Replies View RelatedI'm stuck in the "log off" mode. I don't get the shut down menu. It started when I turned the computer on today. I got a verbose boot up and had to login and enter password and run "startx". Then I got a gray screen before the splash screen.
I had been trying to get alsa to start in the "runlevel" section yesterday, could I have messed something up in there causing this?
Where can i request a free openSUSE cd's from online.I could not Download Because my Internet connection speed is very low.
View 1 Replies View RelatedIf hypothetically I deleted my gpg keys and am not getting updates is there anything I can do to get updates? Almost all software installed is from the repositories where openSuse employees works (official repositories). I have a few packages from openbuild but not too many.
I am trying to read up on security now and see how the keys work so I don't run into this again. It happened during my paranoid attack when I realized I installed packages from the non official repositories and became nervous about having done so.
There are so many virus and malicious software threats now it is making me nervous (especially for XP) and I feel the need to do a little more reading.
How to activate Wireless connection in Opensuse 11.3? The wireless ADSL modem autologin, i just need the connection. i am using notebook, the wireless is automatically installed.
View 2 Replies View RelatedI want to creat a new repository on my openSUSE. As the root, i typed zypper addrepo and i had some options. My problem is, how do I specify the name of my new repository. Which commands should I use
View 1 Replies View Related