SUSE / Novell :: MP3 Audio Decoder Plugin Not Found
May 19, 2007
I keep getting this error message every time I open K3b CD/DVD Burning kreator but MAD Mp3 decoding is install for K3b & Lame is install on my machine. I uninstall it and reinstall with my Smart Package Manager. I am still getting this error message on Suse 10.2.
Error message: Mp3 Audio Decoder plugin not found. K3b could not load or find the Mp3 decoder plugin. This means that you will not be able to create Audio CDs from Mp3 files. Many Linux distributions do not include Mp3 support for legal reasons.
Solution: To enable Mp3 support, please install the MAD Mp3 decoding library as well as the K3b MAD Mp3 decoder plugin (the latter may already be installed but not functional due to the missing libmad). Some distributions allow installation of Mp3 support via an online update tool (i.e. SuSE's YOU).
I am using openSUSE 11.0. This OS installation gives firefox 3.0.5 Beta. I had installed new version of firefox at /usr/local/bin/firefox. I had placed link of this firefox at /usr/bin using this command ->
linux-snvz:/usr/bin # ln -s /usr/local/bin/firefox/firefox firefox My older firefox contains the flush plugin. So i can easily played ..... video's in my browser. But now my new browser saying that it doesn't have flash plugin. I was tried to install flash plugin once again.
Even after installation also my browser is again without flash plugin.
My music library contains some old .wma files and each time I try to run Rhythmbox, a window pops up saying that:
<Name of current song> requires an Additional plugin. The following plugin is required: Windows Media Audio Decoder. Do you want to search for this now ?
If I press the search button I get a response saying that the package was not found. Then I press the close button, only to see the same dialog popping up again. The funny thing is that all this is happening while the current songs is not in WMA format and it is actually playing
I am running fedora 11 and have configured both rpm-fusion and livna repositories.
It seems to be related to some kind of gcc library missing, but I went into YAST and I've installed the kernel sources, headers, devel, and a bunch of other things I found in various forums. I consistently get an error message about GLIBC_2.11 not found, even if I just do gcc -v. Contents of config.log:
I made an image of a server(A). It did not work because It did not see /dev/sda. So I used another cd from indentical sever(B), cd which had work. Then mounted the nfs copy the image over. Server(B) had slightly older version of sles. And its not using lvm. But point is it had appropriate driver in the image cd.
Now situation is, This new image copied ever thing over.(I can mount it using LIVE CD). But When I boot up server it wont see vg volume group. I believe scsi driver is missing.After booting from LIVE CD I chroot in root used yast to add initrd modules, qla2xxx, mptbase, mptscsih(other server(B) had those). Still when I reboot it, it get stuck saying
Code: No volume groups found unable to find volume group waitnit fot device /dev/vg1/root to appear .... not found device nodes: ..... ...... ..... No root device found. exiting to /bin/sh sh: cant access tty; job control turned off
I am unable to get a knoppix poor mans install to boot using grub and opensuse 11.3. I have tried the same method on another box, same opensuse 11.3 and it boots fine. However, no matter what partition I put the knoppix files in on the problem box, it is the same error. I also have several opensuse kernels listed in the grub menu that were added when the kernel was updated, so the knoppix grub entry is off the screen. I have to down arrow to list the knoppix entry. I read that with this kind of error using ubunto as the host system, that running update-grub will force grub to look for bootable kernels and add it to the menu of boot choices. Does the same fix apply to opensuse 11.3? I have two versions of puppy linux working on this box as a poor mans install, so I am at a loss why it will not see the knoppix kernel. Can it be a problem of too many kernels listed in the menu.lst file? This box is a live update from opensuse 11.0.
I have recently installed 11.3 onto a computer I just dropped a new mobo/cpu/memory into. At first everything worked great! (minus a few video streaming issues...but that is for a later date) Then, a few days ago, I let it do an update. Boy to I feel stupid now. I guess if it ain't broke..... So, now I don't have sound in the browsers or for the video players...such as xine. I do however still have sound with Amarok and system sounds when it boots up.
I have deleted the sound device in Yast and let it re-install several times. I tried different setting there as well. Checked and rechecked then checked again the mixer settings. Made sure my group settings included audio...just in case. Now Amarok and the online video play at warp speed, and only Amarok gives me sound....garbled...but sound. The system keeps telling me when I reboot that "one or more sound devices were removed" and wants to know if I want it to ignore them from now on. I've answered yes and no several times.I've also tried updated the alsa drivers in the software management of Yast. Can someone please help me before my wife gets mad at me for converting this computer to Linux?
Here is some information.
The "Warp Speed" for the video and audio was resolved after removing and then re-installing the audio driver and a quick reboot. But for some reason I had to reboot yet again to get the internet connection working again. This has happened to me a couple of times now. Also, when I try to adjust the Pulseaudio config under "other"in the audio config of Yast,it says it is not installed. When I try to install, it has a conflict with another program.
We have a SuSE/SLES 9 server that boots from a fibre channel card, using volumes from a NetApp filer.
We previously had the server booting from the LUNs on the filer, but after some tinkering around with the fibre channel BIOS, we have the situation where the LUNS seem to be mounted, the OS boots, starts to initialise everything but then stalls, saying:
We have tried loads of combinations of settings in the BIOS and fibre channel BIOS without any success or any idea what may have caused the error.
I have just added a local radio station to the list in Rhythmbox but when I double click on the link to listen to the radio station i get a message stating: Search for suitable plugins? I click on Search and i am finally informed that: No packages with the requested plugins found. The requested plugins are: text/html decoder Where I can get hold of the text/html decoder
I am using Fedora 15. When I try to play an mp3 file (that's all I have) on Audacious, I get the error "No decoder found for file:///<some_song>.mp3". Edit: I think I should mention that I have enabled the testing repository, and there was an update on June 30.
I just updated Audacious to 2.4.3, and now when I try to play mp3's, I get this: No decoder found for file "my song." Ogg files still play fine though. I know I can downgrade, but I'd rather this just be fixed.
I just installed SuSe for the first time on my home network. We used it at work for a mail server, but other than manage user accounts, I didn't mess with it much. I've generally used Red Hat distros up until now.In SuSe 10, I can't figure out how to permanantly add a default gateway through the CLI. In Red Hat, it's just a matter of adding a line to /etc/sysconfig/network or /etc/sysconfig/network-scripts/ifcfg-eth0, depending on the setup. Niether of these files exist in my fresh install of SuSe 10.
I've done quite a bit of Googling, and came up with two sites that said to edit etc/rc.d/rc.local in SuSe. Unfortunately, this file does not exist either. I need to know how to make the gateway permanent using the command line. Can I just create rc.local in /etc/rc.d, or is there somewhere else I should be making the default gateway address permanent?
OK... I tried everything i could think of... but i still cannot get my Open SUSE 11.1 to mount my samba share at boot! I still don't understand the 11.1 boot sequence. can NE one help me... tell me what files to give you output from... Ty guys P.S. My shares originate from a Windows Server 2003 RC2 machine, and it's dns server doesn't work correctly... so my mount command is
mount -t //192.168.x.x/files/ /nET/ -o username=linux,password=xxxxxx please let me know what other info you need... I don't have the internet, so it will be tommorow b4 i see this again!!! Thanks
im running openSuSe 10.2 and recently my desktop background and my desktop icons in Gnome have dissapeared, everything else works fine. all my icons and backgrounds are fine in root, or if i login into a kde session instead of gnome. i assume there is some issue with my gnome configuration?
i am trying to install sues desktop on my box. but getting this error,"Could not find SUSE Linux installation CD. Activating manual setup". y system spec isCore 2 Quad 2.4 GhzDG33FB Intel MotherboardRam 4 GB Kingston300Gb Sata Hard Seagate + 320 Gb Sata Western Digital HDDi think the problem is with my sata drives the module is not loaded or in bios ettings
When i am adding a user using "useradd -d /home/test test" or "useradd test", it is now creating the home directory, whereas when i am using the graphical mode and going through several menu options, i am getting the home directory.
I've got several language multimedia CD-Rom's, made for Windows 95/98/98 SE and 2000, that I'm using by means of my daughter's old PC (Win 98 SE O.S.). However I noticed, also, that you can perfectly use them even with Windows Vista. What I'd like to know is if you can use them even with Suse/Novell and (why not?) OpenSuse Linux.
I have a disturbing problem with my monitor which goes to sleep (or ??) after few minutes if my comp is not used and most of the time I have to restart my comp.I disabled everything in Powersave , but nothing. I did have that problem in previous versions of SUSE, but somehow, I solved that. I cant remember what I did then.
I've pre-partitioned my HDD and want to install 11.2 on the second primary partition.However, when using the installer, I can't get Suse to install on the prepared 20gb partition - it keeps insisting it wants to install on the large unallocated section of the drive.
I find the partitioner somewhat hard to use and the answer may be staring me in the face but I can't see it.
how to install a D-Link Access Point on Suse 11.0 or steer me toward documentation that will do that? I configured the device on XP following instruction from this forum and the AP configured perfectly.The AP is plugged directly into the network port on the computer. It *should* function correctly without a router. I tried a restart and Suse has no idea it's there. The computer is currently configured for a wired connection which needs to be changed. The computer itself is going to be used as a small home storage server.
I have been running my openSuSE 10.3 with a ViewSonic VP2130b 21" LCD monitor (1600x1200). This monitor has two inputs, a VGA one and a DVI one. I have had my Mac hooked into the DVI port and my SuSE system hooked into the VGA port. I have always had a nice graphical bootsplash.Recently, I was able to get a used Samsung 213T, also a 21" LCD monitor whose native resolution is also 1600x1200. Since both it and my video card (an nVidia 7800GS) support DVI, I connected it up using a DVI cable.
Now, when I boot, instead of a graphical bootsplash, I get the message "You have passed an invalid mode number". I haven't changed anything but the cable connection to the monitor and the monitor itself. If the mode number was valid before, why is it invalid now? I checked my GRUB boot line, and it is passing "vga=0x346". This used to work but now it suddenly doesn't.
New Suse 11.3 installation with Gnome desktop. Added K3B using Yast2, and after completing the install of K3B, there is no icon for K3B! Instead there is an "X" and the text for K3B in it.From the main menu -> more applications -> multimedia, is where the K3B icon is.Yast2 is supposed to install any dependencies needed or warn if it can not find any missing dependencies. What is missing, or is it a permission problem? All the other application icons seem fine.
PackageKit Error repo-not-available: File '/repodata/repomd.xml' not found on medium 'http://download.opensuse.org/repositories/KDE:/KDE4:/Community/openSUSE_11.2/' My 11.2 won't update and gives this error. Anyone know how to fix it?
I recently installed SuSE 10.0 on my machine which has ASUS K8SMX motherboard with AMD Athlon 64 processor. Actually, I have a dual boot system with Windows XP and SuSE10.0. Due to some problems with Windows XP, I decided ti reinstall XP. So, I popped in the CD, I get a screen which shows "Setup is checking your hardware's configuration...". But after that, the screen becomes blank and the system hangs. I thought that the CD was busted but I checked it on my friend's system and it worked fine. I reinstalled XP using this same CD without any problems.
I have been searching the Internet for instructions on building an rpm in openSuSE 10.3, but the web pages that I came across kept making reference to a "build" command to do so, which does not appear to be present in 10.3. I was wondering if someone could point me to some other resource for this, or would know how to build an rpm in 10.3. I already have a spec file and the source, so I would just like to know how to build an rpm from an existent spec file.
to get flash 10 working. I just decided to update to 11.3. Bought a 8.0GB USB stick to copy files to. USB DISK icon on visible on Desktop. mounted on /media/USB DISK Clicking on device properties it is read only. I can change permissions but that is only temporary. Looking under my computer it is formated as vfat device name is /dev/sdb
I can't copy any files to it. Can't see in terminal even being root as well. Almost started the Partitioner in Yast but didn't want to accidently crash the system. That WOULD be my luck Can't find a way to format it via GUI interface. Can I use something like fdisk in terminal. I guess I need to format it as ext3.
I have been searching for 2 days and cannot find an answer. Apparently Sax2 isn't available in 11.3. It looks as if many are having the same difficulty. I've tried xrandr and tried to edit /etc/X11/Xorg.conf with no success.Copying a working xorg conf file might be a fix, I don't know.