Red Hat / Fedora :: Promiscrous Mode Of Network?
Nov 29, 2010
Currently , I have a PC with linux installed (centos ) and connected to this port and try to dump the data using wireshark 1.4.2. Unfortunately , I only capture data withsource/destination directed to itself . I confirmed that all data are redirected toobserving port because if a PC of Win2003 + Wireshark is connected and really dump all data. So I guess it might be caused by the NIC configuration in Linux . I am not sure that the NIC does really work in promiscous mode so that it abandon other data.Besides ,I also try to dump these data using TCPdump ,and so is it .
View 1 Replies
ADVERTISEMENT
Jun 5, 2009
For a certain reason , I have to set network in text mode . My X window need network to start .
I have a router at 192.168.1.1 DNS address: 202.102.134.68 / 202.102.128.68 I want my PC at 192.168.1.2 in LAN.
How to do with it in text mode ?
View 14 Replies
View Related
Aug 16, 2011
I made a big mistake. While logged in as root i deleted the /bin directory by mistake. I cannot boot up now...I tried to re-install with the upgrade option...Did it partly but it does not go to the login. I tried a rescue operation and have gone into /mnt/sysimage...However I do not know how to copy my data files over the network to another computer. If I could do that it would be great...I can then backup my file and reinstall.
However I do not know how to setup the network in rescue mode..
Agter going into the network option ...It gave 2 places where I could enter the values ipv4 .and ipv6...I tried entering the old IP address in the first oprtion ........./....Its prompting for some entry to be put after the /. I think its a 3 digit input. Not sure what has to be done.with namesserver and default gateway....I have a small dlink hub and normally (when the system was running) I just needed to go into network manager and enter the machine ipaddress, subnet mask 255.255.255.0 and some value for the default gateway which was not really there....It worked, i could remote connect with another computer in my LAN. How do i enter the 255.255.255.0 in rescue mode?
View 5 Replies
View Related
Jul 2, 2010
when I tried to install Nvidia driver for my computer, and when I reboot it, I found i can not log into the x-window mode as the screen display freeze at the point where suppose to be login screen. so use grub go to text mode, try to reinstall the akmod-nvidia xorg-x11-drv-nvidia-libs.i686, but it failed, sames i don't have internet connection to retrieve it. how can I start my network connection under text mode?
View 13 Replies
View Related
Jun 13, 2011
I am an emacs user, and I noticed that on my new machine (running F15, 64bit) flyspell-mode will not work in tex mode.
I get errors that look something like this:
Code:
Spell-checking inequality-model.tex using hunspell with default dictionary...
Spell-checking region using hunspell with default dictionary...done
ispell-send-string: Process ispell not running
When done with a buffer, type C-x #
code....
View 2 Replies
View Related
Aug 30, 2010
Below is a print out of my partition Table from Fdisk, in Cylinder mode, Sector mode, and then in expert mode?
Why in expert mode does it look like Partitions 2 and 3 share the same sector / hd / Cylinders? Is this OK?
Code:
View 3 Replies
View Related
Jul 25, 2011
I wonder if it's possible to configure Debian so that it keeps network connection live while in sleep mode
View 3 Replies
View Related
Feb 10, 2011
I have never had a working suspend. But ... every year or so I try it DOH!!! to see if the updates have solved itI used suspend mode today, and when I woke the system up , all seemed fine untill I tried to browse the internet.It told me I was offline. no ammount of clicking "go online" would work.So, then I noticed the network connection was broken.I did a few things to get connected, and I want you all to tell me what I need to put back again ! IPV4 and IPV6, I unclicked the box to require this for connection to complete.Somewhere else, there was a list of servers to ignore. I removed them all. (I think there werre 3) one was localhost another was similar, and the third was a number.I just want to know what these should be set at, because just because it works - doesn't make it right
View 6 Replies
View Related
Jun 17, 2010
I want to monitor network traffic with ntop from a Lucid 10.04 machine. Both NICs have picked up an IP address, I need to put one in promiscuous mode. I typed sudo ifconfig eth1 promisc and the response was SIOCSIFFLAGS: Permission denied.I also tried sudo su ifconfig eth1 promisc[sudo] password for user1: I put it in Unknown id: ifconfig
View 3 Replies
View Related
Dec 20, 2008
I've successfully install kvm with private network (nat) up running. I want to switch the kvm network using bridge mode (or host-interface), but do not success. env: nic iwl4965/ kernel 2.6.27.8/ debian etch upgrade to lenny/ kvm 0.9.1/ hardware hp 6910p The doc I follow up is at [URL] The way how i set it up is to modify /etc/network/interfaces by adding following section to enable br0
Code:
allow-hotplug br0
iface br0 inet dhcp
bridge_ports wlan0
bridge_fd 9
[code]....
However, the problem is the guest os, which starts with -hda k1.img, can not access to the internet. Is there any step I miss? or it is because wireless does not support bridge (I've heard doc says that wireless does not support wireless bridge)?
View 4 Replies
View Related
Apr 7, 2010
I have installed CentOs 5.4 for Snort sensor , on the location where i intend to place the Snort sensor to listen for internal firewall leg (LAN) the switch doesn't support port mirror so i would like to create with 2 nic's bridge and pass trough the firewall internal leg my question how do i set such configuration.
View 2 Replies
View Related
Dec 22, 2010
I feel really dumb for asking this but I cant figure out how to get it back to simple mode
View 4 Replies
View Related
Aug 29, 2010
I have a HP Pavillion DV7 laptop running Ubuntu 10.04, and I am having some problems with Ubuntu handling a network connection. Every so often, I leave my computer in locked mode overnight to download something. But, when I do this, the network just deactivates early on [there is a symbol of a blank wireless symbol with a red "?" by it]. Both the wireless and wired network connections are deactivated, and I am using a wired connection. This also sometimes happens in suspend mode, too, but less often. I have to restart my computer before it will connect again, as logging out and back in again does not suffice.
View 1 Replies
View Related
May 27, 2010
If I switch the network card in fullduplex mode (switching command: ethtool - change eth0 autoneg off duplex full), then the network stops working. On Slackware 13.0 this problem did not exist.How do I switch the network card in fullduplex mode?
View 2 Replies
View Related
Nov 18, 2010
I've looked today on my logs /var/log/message and I find device eth0 entered promiscuous mode I don't remember putting eth0 in promiscuous mode I'm connected to the net thru a router how do i turn that off ?
View 1 Replies
View Related
Jun 2, 2010
after trying several pci and usb network cards none were able to have their ssid broadcasted. The question that i have is: Can a suse box be converted to act as an acces point without the use of atheros based hardware, without switching over to ubuntu and or debian, without the use of openwrt?
View 4 Replies
View Related
Apr 4, 2011
I would like to change wireless mode on my network card. When i type in iwconfig in terminal so i get abg I would like to have only a mode active. How do i do?
View 2 Replies
View Related
Nov 30, 2010
I am configuring an internet kiosk on a centos 5.3. For that I need the browser in the full screen mode but here the network manager applet does not pop up the network status as the ethernet cable is plugged in/out. I want that feature in my kiosk. This feature works fine in an ubuntu machine. update me if any particular setting is responsible for this behaviour.
View 1 Replies
View Related
Jan 23, 2011
I virtualised backtrack on windows 7, and set up the network connection to bridged mode, but my networking still fails.
dhclient eth0, outputs many DHCPDISCOVER but no DHCP offers.
View 2 Replies
View Related
Feb 28, 2010
I've got problems uploading files to a remote FTP server using passive mode with enabled SuSeFirewall2 (Using 11.2)
I've disabled Firewall and everything went ok. Why firewall disables or terminates OUTGOING connections to a remote FTP?
View 7 Replies
View Related
Apr 23, 2010
how do I make grub boot to allow me to choose, like safe mode and normal mode and all that second, how do I do automated back ups (preferably using file copy) for something like every sunday at 11:00 am using the command line, i use to know but forgot.
View 1 Replies
View Related
Nov 18, 2010
I attempted to install Catalyst 10.11 for my ATI HD 2600XT and the system now only displays lines and a large block of pixels where the mouse would go. CTRL-ALT-F1 kills the system and does not provide a command prompt. This is a single installation, not dual-boot, but there is no Press Esc to access the Grub menu during startup so I cannot choose safe mode. I attempted to get into Recovery mode using the flash drive that I used to install the system and it tells me there is no Recovery kernel (I used the 64-bit Desktop installer, not alternative). Does anyone know an alternative to get into the Grub menu other than ESC during bootup? Alternatively, do I need to download the 64-bit Alternative ISO and create a new boot disk with it so I can access Recovery mode? Is there something else I'm not thinking of?
View 5 Replies
View Related
Dec 1, 2010
My linux workstation recently crashed. After rebooting, Linux (Red Hat 5.3) will not boot properly and automatically went into emergency mode or recovery mode i think. I can still see my /home/user/ and all the files inside.I boot from CD to rescue mode and tried mounting read-only the /dev/sd5 which contains the files in the crashed hard disk to try to copy out my files but mounting was unsuccessful (invalid argument). I checked the filesystem type using fsck -N /dev/sda5 and shows it to ext2. i tried to mount another known working hdd and was successful.
My question is why in emergency mode, the crashed hdd is able to be mounted automatically as read-only but cannot be done in rescue mode thru a bootable CD?Is there any special mount options used in emergency mode?I also cannot copy out in emergency mode booting from the crashed hard disk as everything is read only.
View 3 Replies
View Related
Sep 21, 2010
I ordered this USB 802.11n dongle for about $10 and am having problems.I found a firmware related bug (Bug #595455) that keeps it from working out of the box and got around that. I put the right firmware file in the right place and CAN CONNECT TO B or G Access Points.hen I put my AP in N-Only mode, I can see the network, but cannot associate. With the AP in mixed mode I can Associate using G.The most interesting thing I found was something that had very
few google hits (like 4). In the dmesg output after associating I see the message:
Successfully associated, ht not enabled(0, 1)The most interesting thing about this is the (0, 1) at the end.I don't know what that means but it seems like a clue as to what the problem is.This device uses the realtek chipset 8191S, there are conflicting reports on this, but all the reported possibilities seem to use the same driver from realtek (rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.2010 0625).Here is some random info:
Dmesg output:
[85082.620027] usb 1-3: new high speed USB device using ehci_hcd and address 6
[85082.754586] usb 1-3: configuration #1 chosen from 1 choice
[85082.755456] ==>ep_num:4, in_ep_num:1, out_ep_num:3[code]........
View 1 Replies
View Related
Jan 2, 2010
I played with the graphics in kde4 and seem to have losy my installation. i have tried the rescue system option, recover system options and in desperation (i was just about to reinstall) tried booting in failsafe mode, and it worked!
where do i go to find out what the problem is regarding the normal boot mode? i think my pc is starting to resent the continual use of the reset button!
View 6 Replies
View Related
Jan 30, 2010
I installed ubuntu 9.10/9.04 on my usb key as live image couple of time. I have trouble when I try to install wine on my usb key. I am wondering what is the difference if I install my ubuntu into my usb key directly? will that be slower compared with live CD mode? I guess live CD mode may use memory as part of harddisk to save temepory files and normal usb linux installation won't do this for me. Is this true?
If so, do I have a choice to point my tmp directory to system memory area?
View 1 Replies
View Related
Feb 8, 2011
When I first installed ubuntu 10.10, the display was for some reason tinted green and shifted a few inches to the right. After experimenting with the resolution preferences, I eventually got it to a large resolution (1280x720 ... or something like that) yet is was quite blurry. I found out that the problem was with my monitor after I switched it to TV mode, then back to PC mode. It became perfectly clear! All I had to do then was adjust the screen positioning by shifting it left a bit.
Even though I have made the resolution I figured out to be default, whenever I turn the PC on after shutting down, it goes back to the "green-and-to-the-side" mode. :/ Ain't really a big problem, until I tried to fiddle with the resolution preferences s'more.
Somehow, I have set it to be twice as wide of the maximum my monitor can display, went back to being green tinted for some reason, and is completely shifted left (yet the right side is still visible) This means that I cannot see what is going on the left side, and cannot adjust the resolution preferences, nor can I click blindly cuz the border is only around my visible side of the screen. Now it is stuck like this.
I've researched many hours and eventually found the terminal command for the resolution preferences. it popped up on the visible side. Although it was to no avail cuz I HAVE TRIED EVERY SETTING AND OPTION and absolutely nothing changed. I assume a system restore would simply revert it back to the previous satisfactory settings, but the thing is I want to FIX it. I am new to this terminal stuff, so I want to learn it and all that. To put it simply, here's what I want:
Learn how to manually adjust resolution without depending on a simple dialog box. Make the satisfactory resolution default and consistent through turning it on and off. Link that could teach me the essential commands, all this googling is stressful. D:
View 3 Replies
View Related
Sep 14, 2009
The system always boot up in Graphic Mode. After installation of Web Server, I want to disable Graphic Mode and change it to boot to Text Mode to save memory. Is there a way to disable graphic mode?
View 1 Replies
View Related
Jan 12, 2011
I was reading about ext3 feature and I have read about its journaling modes. I would like to ask what is the default journaling mode of ext3 fs in slackware(or is it in all distro using ext3)? I'll install slackware when my new pc arrive and the fs I will use will be ext3 and I like it to have data=journal mode for its journaling. I have read in some wiki how to set the journaling mode into data=journal mode.
Code: # tune2fs -O has_journal -o journal_data /dev/sdXY Do i need to issue this command or is this the default mode in ext3 in slackware?
View 9 Replies
View Related
Dec 7, 2010
I accidentally chose the "recovery mode" and now i dont know what to do. What commands i have to enter to go back to normal ubuntu mode with graphic etc?
View 9 Replies
View Related
