I have a hash of hashes and I need to sort this by value and write to a javascript array file..Currently I am using the following
foreach my $key(sort { keys %{$trans{$a}} <=> keys %{$trans{$b}}} keys %transmission)
{
foreach my $role(sort {$trans{$key}{$a} cmp $trans{$key}{$b}} keys %{$trans{$key}})
[code]...
I am in need of some syntax help. I'm trying to figure out how to store and retrieve an array out of a hash of hashes. For this example, I'm trying to access the city list for a particular state for a particular country. I understand I could do a join and split on the hash key to combine Country and State, but trying to keep things separated.The code I have gets in all the information for the Countries, and states, and gets the list of cities together, no problem. I store all the city names in an array, then make an anonymous pointer to the array for the hash, like this - $MY_CITIES{$COUNTRY}{$STATE} = [@CITIES]I believe that syntax is correct, or is it? What I'd like to do is I need to cycle through every hash to find if a city exists or not. If it exists in 3 states, then it should print 3 times. Here is the code block to search -
Code:
for $COUNTRY (@LIST_OF_COUNTRIES) {
for $STATE ( keys %MY_CITIES{$COUNTRY){$STATE} ) {
[code]...
I'm trying to figure out how to code for this specific type of instance - I want to use a hash and have the key be a reference to an array, and not use the key in the standard way of it being a scalar. Basically, I have a large output that I need to process line by line, and rather have access to it as an array than a big block in a scalar. For the big block hash as a scalar I would do -
Code:
foreach $CONTROLLER (<CONTROLLER_LIST>) {
$ALL_DISKS{$CONTROLLER} = `ssh -n <commands>`;
}
Now I know I could take the scalar and split it to another array after the fact like -
Code:
@TEMP_HOLD = split (/s+/,$ALL_DISKS{$CONTROLLER});
How would I code it that I would have access to the key information as an array and not a scalar? I know it needs to be a pointer and we're going to have -> in there somewhere, but not sure how to approach it. Some of the documentaiton I've been reading about referencing I've found a little confusing so far, and trying to figure out how to use them in context of what I'm working on.
Can I have a custom delimiter for hash in perl?
View 4 Replies View RelatedI am trying to make a hash of objects in perl (long story.) I have a package containing the main hash and all the subroutines necessary to work with it. My "new" subroutine used to add an object to the hash goes like this:
Code:
$tmpdir="/tmp";
$subdir="/AutoScript";
[code]...
The perl script I wrote works fine if I print the result to screen
x0_amber.pl 1 1000 0 5
But whenever I want to output to a file with
x0_amber.pl 1 1000 0 5 > x0_out
it never really prints out to the file.
It worked earlier, but I was playing with my PATH lately, I don't know if it's related to that
Each line of the file I am sorting is in the following format:
<url> <month> <day>
For example:
[URL]
I wrote the following to sort:
Code:
#!/usr/bin/perl
$in = shift;
chomp($in);
[code]....
The script worked fine for my small testing files, but failed in my input file. The input file is 18MB and containing more than 300,000 lines. The output will contains some lines like that:
url_one 10 1
url_two 10 1
url_three 10 3
url_four 10 1
Is that because my file is too big for perl to handle ?
I have a file which looks something like this:
##########
some
text
text also includes empty lines
##########
some
more
text
##########
Basically all sections are separated by 10 hashes and I need to somehow only print all lines in the last section (the "some more text" part in the example above"). I tried all kind of things with sed and awk but I didn't find any way to identify the last "section".
What options should I use when I'm using the sort command to sort the top 5 CPU processes (ps -eo user,pid,ppid,%cpu,%mem,fname | sort ??? | head -5) showing max to min usage?
View 2 Replies View RelatedI have something like this:
$arr_hash{'produce'}{'veggies'}[0] = Broccoli
$arr_hash{'produce'}{'veggies'}[1] = Cauliflower
$arr_hash{'produce'}{'veggies'}[2] = Carrots
[code]...
We switched from unix to linux and we have an old report that extracted data from a database, output to an ascii file and then sorted the results in the file based on different arguments. The report now blows up when it runs,and I can only guess it is because the options for sort on linux differ slightly from unix.For example, here is one of the commands issued from within the report app that ran on the old unix box:
if sort-sequence = "descending" then
'sort -t~" -f +3.0f -4.0 +5.0r -6.0 -f '
else
'sort -t~" +3.0f -4.0 +1.0f -2.0 -f'
I will eventually rewrite the report to store the data in a local table, but I can simply adjust the options to suit the requirments of linux. Basically, I need to know if this can be a quick fix for the short term.
I'm writing an interpreter and it used simple association lists for mapping varaible names to their values. Here's the code:
Code:
#include "assoc_array.hpp"
#include <string.h>
using namespace LANG_NAMESPACE;
[code]....
I thought that I would replace it with a hash table to increase performance. Note that I decided to store linked lists in the buckets instead of the actual values, in case the hash function outputs the same index for multiple variable names:
Code:
#include "hash_table.hpp"
#include "assoc_array.hpp"
#include <string.h>
[code]....
It runs in about 0.333 seconds on my machine. Since I'm using git version control, I decided to bring back the old version that used association lists. To my amazement, it ran 3 times faster, completing in 0.116 seconds! Is my hash table implementaion really that bad, or is this a really poor benchmark (and real-world code actually will be faster using the hash table)?
I was reading about Ruby code blocks, but it's all a bit hazy.My questions:1. Can you store executable code in the value part of a hash (err...associative array)2. If you did, how would you call the code?3. If you executed this stored code, would it be possible when doing soto pass in an object to the code that it could use?
View 1 Replies View RelatedWhat is the easiest way to replace a hash in a shadow file for one particular user, not using passwd, and when the current password is unknown?
View 3 Replies View RelatedI have a very bad attempt at hashing the components of an tcp session to assign/locate the session in a hash table bucket. I am pretty sure that it has a very high collision rate and when there are a very large number of tcp sessions my application is having to search a long linked list to find the session within the bucket.
All the hashing functions I have found take a single string input where I need to input several integers and hash them into a single result. My guess is that any real hashing function is going to produce better results than what I am currently doing.
[Code]...
If you can follow this discussion:url
I'd like to know what "import by hash" is.
Where is the perl module for programming with sockets?
View 4 Replies View RelatedI just downloaded Tk-804.028 and try to install it (according to the README.linux) but I get:
> perl Makefile.PL
/opt/ActivePerl-5.10/bin/perl-static is installed in /opt/ActivePerl-5.10/lib okay
PPM for perl5.010001
Test Compiling config/perlrx.c
Test Compiling config/pmop.c
Test Compiling config/pregcomp2.c
[code]...
Any recommendations on what Perl tutorial to use?
View 1 Replies View RelatedI am taking an input from the user for free and Used capacity in a disk. I wish to convert Input entered in MBTB to GB and this is how i am doing it.
Code:
<some code>
print "Enter Total disk space";
$tot = <STDIN>;
convert($tot);
[code]...
how do i pass the value of conv[0] after conversion back to $tot or $use such that they contain only value which is in GB?
I really would like Perl Qt4 bindings. The best I could find is this:[URL]The problem is that the sources would not compile, and the RPMs are for 32-bit machines.Is there really no such thing as good Perl Qt4 bindings?
View 8 Replies View RelatedI am a newbie on linux and just searching everything about perl scripting and modules nearly 3-4 days. I need a perl script but one of not easy to find on searching google. Okay now I need a perl script which create or recreate (edit) id3 tags (artist, comment, album, year, cover) of mp3 files stored on my linux centos server. I installed MP3::Tag version 1.13 pearl module to my server. I Searched tutorials about how to use it, finally I get through reading id3 tag of mp3 file but not achieve to modify it or create a new id3tag.
These are the details:
I have a mp3 file called 1.mp3 this script will process that '1.mp3' file read its id3tag if there is one, than modify or create id3tag for it by my fix artist name for example:
'1.mp3' files id3 tag details are like this
Artist: Dj xx
Year:2010
Title:yyyyy
Comment:eerwer
Cover: x.jpg
Now via this perl script which uses MP3::TAG I will change it's
artist as YYY
Title:ttt
Comment:cool
Cover:t.jpg
these are gonna be my fixed values. I mean all '1.mp3' file will have same artist based on script value.
The reason of this script is I will share Dj podcasts on my server and Dj's would have upload their mp3's which has got different id3 tags and cover pics. etc. I want to create more organized podcasts of them by the way I would trigger this perl script via Cronjob.
How can I generate a md5 or sha-1 code with perl?
View 2 Replies View RelatedI'm currently running tests on my SAM file on my XP partition. Partly because I want a password that is hard to crack, and also out of curiosity. While running John the Ripper (no options used) I'm noticing that there are 8 pasword hashes, yet only 4 users associated with WinXP. I know that JTR only does 7(?) characters when it check for a solution. Is the 8 hashes because it separates passwords longer than 7 into 2 hashes, and then cracks them individually as 2 parts? I did try googling this,
View 2 Replies View RelatedAs some of you know that I am new to this forum. I have another problem that I got stuck on. I have this file called "Fib.rbb" and my instructor told us to write an interpreter program by using Fib.rbb.
"You are to write an interpreter in Perl for Rongs Basic Basic (RBB) as explained in class. The BNF description for RBB and a test file called Fib.rbb are part of the RBB.zip file which is available in the Course Documents folder on blackboard. If you call your interpreter myIntp.pl, you would execute the program via perl myIntp.pl Fib.rbb
Code: Print "A few Fibonacci numbers:"
Just installed Fedora 14. I wanted to try "Hello World" with perl. But where is it?
Code: [user]@user bin]$ ls
Im somewhat new at perl and was wondering if there was a way to run a perl script or tool made from perl, from a USB pen that would work both on Linux and on Windows?
View 1 Replies View RelatedI writed my home.html page in /var/www with following form:
Quote:
<form action="/cgi-bin/login.cgi" method="get" class="form-font">
<label>Already you registered?</label><br/><hr/><br/>
<fieldset><br/>
<legend>Insert your account</legend>
Email: <input type="text" name="email"/><br/><br/>
[Code].....
I'm the server guy which is why I don't know this, but were staging a new webserver and we use some custom perl scripts and as were moving the site over for testing, apache is blowing a perl error;Can't locate web.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.10.0 /usr/local/share/perl/5.10.0 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10 /usr/local/lib/site_perl .) at /home/mcp/htdocs/cgi-bin/newgraph.gif line 11.,Now I can copy that file local, but there are a bunch of things, so the question is how do you globally add a folder to the perl search path
View 1 Replies View RelatedI have a debian lenny machine that I am trying to add mod_perl to and use apache asp on. I have had a range of failures on it. Is ther a way I can build apache2 with mod_perl in it? Instead of separate. Apache2 is built with some modules built in by default, how can I make mod_perl one of them?
View 1 Replies View Related
