I'm trying to write a python script that will calculate my test scores from a text file named "exams."
Sample input would be:
Output will look like:
I have the following code:
Code:
My intent is to sum the values found in L and divide by len(L).
I think my issue is that when I split the values, I get a string array (ex. ['85', '90'] ), which makes it hard to do calculations.
With array in php. All I was having the following columns:
Code:
Now Like the Above there were more variables defined through script:
Code:
Now what the above code is doing is calculating average of above values from columns{1-?,4-?)..likewise
Say If I remove two Machine and calculate the avg.
I have a data in a column.
Code:
I want to calculate average and standard deviation. As first step I want to calculate average for the data than calculate (del=data - avg) for all the data.
I suppose get
Code:
For this I use AWK and the code goes like this
Code:
But I get different answers.
Code:
Why the answers are so different? since this is wrong I can not continue calculating the standard deviation.
I am new to shell script and to this form as well, I did try to search for a similar post like mine here, but could not find one.
Here is what I'm trying to do:
I am trying to grep server logs to find a specific string and then capture the time stamp and the value of that grep string in them. The log file prints out messages on per sec basis.
My script is able to grep the server logs for the entire period of my load runs and then outputted it to a .csv file too.
Unfortunately this .csv file is too large to extract it on my PC and to generate graphs as it exceeds the excel limit. I need some help on how to read this .csv file in a shell script and then take an average on per min basis before I can export it out on my desktop and generate graphs for analysis. example of the out in my .csv file:
I'm writing a script which will calculate bandwidth usage, I'm monitoring the bandwidth with cacti and the results don't quite line up, can someone either correct my script (if it contains faults) or tell me why the results aren't the same. I'm using a guide obtained from cisco here: [URL]. Here's my code:
Code:
SNMPCOMMUNITY=public
IP=127.0.0.1
INTNUMBER=1
OUT=$(snmpget -v2c -c $SNMPCOMMUNITY $IP ifOutOctets.$INTNUMBER | awk '{print $4}')
[Code]....
I want to be able to do
sudo ./program.py
instead of always having to do
sudo python program.py
What do I need to change?
I've already used line split stuff to transform my data into something like this in a text file:
Code:
['1', '1', '3', '20.7505207']
['2', '1', '3', '23.0488319']
['3', '1', '3', '-1.5768747']
['4', '1', '3', '-26.4772491']
[code]....
How can I get this on a python program so I can manipulate it as an array?
I have a text file with 4 columns and 18 rows. All are integers. I wish to find the average of first 12 numbers in the third column using 'awk'.
View 8 Replies View RelatedI have a file which has several entries with
# comment 1
1245
# comment 2
5667
# comment 3
456456
how can I read the file, sum the numbers ( "avoid" the #lines) and then get the average of the numbers?
I do awk '{s+=$0} END {print s}' /tmp/file.txt. and this give me the sum correctly, but how can I get also the average ?
I have a function definition in a Python 2.x script which take a tuple as one of its arguments, but 2to3 has no answers nor any of my searching on how to represent the same in Python 3.x
Code:
def blah(self, (string1, string2))
I'm new to the linux world and its been quit sometime since i've done any programming. However, I'm writing a program which simply calculates the load average of a process. In doing this I need to use the uptime command for linux in a java program. I've done a little bit of searching on the net and it mentions this is possiable by using java runtime command. Unfortunatly though I have yet to find a working example of this. I've tried just simply reading the /proc/uptime file but I have no clue how to format the 2 numbers in seconds to make it the same as if you just typed in uptime in the linux command prompt.
View 2 Replies View RelatedI want that I click with the mouse on the video, it paused.I notice that there is "BaconVideoWidget" which I guess is the video rendering widget but it don't have signal named "clicked":
Code:
vd = totem_object.get_video_widget()
vd.connect("clicked", vd.hide)
[code]....
I'm starting to learn python and I am wondering whether I should start with python 2.x or should I just start learning python 3.x?
View 2 Replies View RelatedI have an existing line of code from a P2 script that I cannot find a solution to converting to P3:
Code:
for i, x in map(None, list1, list2):
I have found the information about converting the simple case:
map(None,x) becomes list(x)
But my googling was unable to find a solution when more than one iterable exists.
I have a python script I wrote a while ago and now I would like to call that script from inside C. I know how to do one command from C, but how would you execute an entire script from C, and passing arguments? Like:
Code:
int main(void)
{
python( myprogram(1 2 3) );
}
So I can pass arguments to my script.
what the equivalent function in Python 3.1.1 is for Python 2.6.4s:
Py_FindMethod
Be buggered if I can find anything in the doco to say what replaced it or what alternative code may need to be entered to replace it
I have decided to learn python as it seems to be powerful not just for web development (like php) but also a clean powerful language for other puposes.
Q: Can someone suggest a tutorial or book, on learning python (beginner to intermediate) which has as its focus for learning, web development?
In order of preference: 1. Comprehensive, 2. Online, 3. Free
I have a bash script that I want to import in to Python, mainly just to see if I can or not. However in the script I do use some piping of commands into sed to trim it down to what I need. When I tried doing it with the os.system() call, it didn't work. The exact error is
sed: -e expression #1, char 16: unterminated `s' command
However the command that was run can be run in bash without an error. Is there a better/another way to do this? For reference the command is:
Code:
locate -n 1 wp-config.php | sed 's/wp-config.php/
/g' | sed '/wp-config.php/ d' | sed '/^$/ d'
I am using Centos. I have written some scipts in python that access my routers and fetch the configuration, etc. Now i was thinking of creating a web interface which i can access from my windows XP. I want it to have good look n feel :-),
View 7 Replies View RelatedI want to create 3D animation and also make some big programs. Is python capable of that? or should I stick to C++?
View 3 Replies View RelatedI am trying to build an application that must link with python so as to load a python module during runtime.I have this makefile :
Code:
[alex@iskandhar src]$ cat Makefile
CFLAGS = -Wall -O3 -I ../../../SPOOLES.2.2 -DARCH="Linux" -DSPOOLES -DARPACK
[code]....
I have a list of list and I'd like to sort the list according to the last value of each row.
Let's say we have the list
L1 = [ [1,2] , [4,6] , [78,-3] ]
I wish to get
L2 = [ [78,-3] , [1,2] , [4,6] ]
Is there a simple way to do that in python?
I've been loosely following this:http://norvig.com/lispy.htmlAnd I have a problem: the parsing function throws an array out of bounds exception. I thought that maybe I'm doing it wrong, so I copy and pasted the code from the page, and still the same error
View 2 Replies View RelatedI am having a problem initializing the Pmw megawidgets for Python 2.6.I have Pmw_1_3 loaded in the site-packages directory.
View 1 Replies View RelatedI found an interesting screencast online about how to make gtk Pyton apps. The thing is, though, the guy was using the interactive shell. I've been trying to get his code into a script, and have been having troubles.
Here's what I got:
Code:
It spits out the error "NameError: global name 'browser' is not defined"
I know I'm doing something wrong with how I'm telling it where to find "browser" and "text", but I can't figure out how to point it to the right place.
In the code below:
Code:
The output is:
Code:
Looks like the "," operator in the print inside the loop is adding a space for its own.
I want to print the sequence WITHOUT spaces. Something like this:
Code:
But I couldn't figure out how to do this.....
How to print a sequence, inside a loop, without that space ?
But it's been hell finding an answer, or I just don't know what to look for..I have a prompt that asks for a float, and if the user doesn't put in a valid number, then it should die with an error message.
Code:
def die_with_error():
print 'ERROR: You didn't specify a valid number!'
[code]....
I need to write a program for time. like i have 2 tasks both minutes and hours.
like this
1st task=5 hours and 30 minutes
2nd task=2hours and 45 minutes
Together they will take 8 hours and 15 minutes.
I need to write a program thats called ADDTIMES to do something like this.
This is what i have so far.
H1=int(input("enter the number of hours:")) etc..
For a work project, I've got a bunch of python code from about a year ago that controls the movement of our EVI-D30 camera over a ttyUSB connection. It used to work fine on a 32-bit Fedora box, but recently we moved our whole project over to a 64-bit Gentoo server, and the same code seems to be worthless on the new platform. I didn't write the code, so I'm have trouble figuring out how to fix it. Error messages usually look like this:
Code:
File "./CameraController.py", line 172, in pan
turn_callback(cmdStruct[0], cmdStruct[1])
File "./CameraController.py", line 147, in turn_callback
cameras[camera].TiltUp()
[code]....
I'm writing a command-line flash card program in Python. I've tried many existing applications, but none fit my specialized needs.
All of the words I'd like to study are manually added to a text file (study.txt). Each time the software is loaded, it checks for new words in that file and also compares them to a dictionary (a tab-separated file, dictionary.txt), and adds that to a matrix. The flash cards are thus automatically generated from study.txt and dictionary.txt.
Now, the software must manage lots of information about each word I'd like to study and add new information made while interacting with the program (such as when that word should be studied next).
That seems easy to put into a matrix. But what is the best way to put that information in a place where I can pull it back when I run the software tomorrow? Do I need to save the matrix to a CSV file, then convert the CSV file back to a matrix the next time the application is run?