OpenSUSE Wireless :: Sakis3g Script Not Working?
Jun 25, 2010I followed the instructions to install the script - Sakis3g for openSUSE and couldn't get it to connect. I'm using a 3.5G USB Modem.
View 1 Replies
ADVERTISEMENT
Hardware :: Sakis3G Setup & Configuration - Username Required By APN
Jun 17, 2011I am trying to use the sakis3G, i choose the option connect 3G, it asks me about username required by APN?? I have no usernames, and I don't know what APN is? I prefer using the sakis3G since it looks simpler than using USB_ModeSwitch which I didn't manage to understand it from the sites you posted.
View 14 Replies View RelatedOpenSUSE Wireless :: Atheros Wireless Adapter Not Working On Compaq Presario C700?
Feb 12, 2011I have an Atheros AR5007 802.11 b/g WiFi Adapter. I use OpenSuse 11.3, KDE desktop.When I did iwconfig, it displayed the following:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:"sami"
[code]....
OpenSUSE Wireless :: Wireless Not Working Compaq 6910p Intel 4965 AG Or AGN?
Feb 17, 2011I am running openSUSE 11.3 updated with all the latest patches and I cannot connect to my wireless router. I am running Linux Mint 10 on the same type of notebook HP Compaq 6910p and it worked right after the install. If I take off the security WPA & WPA2 Personal I can connect. lspci -v | less shows this for my wireless card.
10:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
Subsystem: Intel Corporation Device 1000
Flags: bus master, fast devsel, latency 0, IRQ 29
Memory at e4000000 (64-bit, non-prefetchable) [size=8K]
[code]....
I am using the same settings for both notebooks just can't figure out why openSUSE 11.3 won't connect. I get the prompt to key in my password, I've even checked the box to show password to make sure I was keying it in correctly. Everything was good but it just goes right back to the password prompt after it fails trying to connect.
OpenSUSE Wireless :: Followed Sticky Post On Wireless Not Working Till Got Confused?
May 24, 2011i read the sticky post on here about how to try and get my wireless card working.
i have installed opensuse 11.4
i followed step 1 of post and got following: /usr/bin/lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[code]...
OpenSUSE Wireless :: Working Unstable And Very Slowly - Wireless Appears So Late - 10min Later After Loggen In
Sep 4, 2010My openSUSE's working unstable and very slowly! Wireless is starting very late.It appears 10min later after i loggen in,and wants me to enter wireless password.This windows is showing up so late,and I can't connect internet before it shows up.
View 4 Replies View RelatedOpenSUSE Wireless :: Wireless Not Working \ When Click On Networking Panel, It Says WLAN Interface Is Unavailable?
Jul 8, 2011I have just installed openSuse 11.4 KDE 64-bit on a Dell M1330. When I click on my networking panel, it says WLAN interface is unavailable. I've followed the steps in the stickied post and found the WLAN hardware info, a screenshot of which is below:Uploaded with ImageShack.usNext it says to do this - you need to look at the logs, in particular the info in /var/log/boot.msg. To see this, you need YaST => Miscellaneous => System Logs and select boot.msg.In YaST there is no such option for system logs under miscellaneous, so I can't do that. The results of the sudo /usr/sbin/iwlist scan command produce the following:
root's password:
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
[code]....
OpenSUSE Wireless :: Intel PRO/Wireless 5300 AGN Stopped Working For 11.2?
Jun 6, 2010The wireless on my 64-bit openSUSE-11.2 installed on my Dell Studio 1537 laptop stopped working some time back (possibly more than a one or two months back). I just discovered this last week when on business. I have not used the wireless under openSUSE-11.2 for a while so I am not certain what broke it, but I am suspicious of an update. I note openSUSE-11.3 milestone-7 works great with the wireless (on a liveCD). I note possibly two related threads, although I note no failed request for firmware in my case:request for firmware file 'iwlwifi-5000-2.ucode' failed [INTEL 5300 AGN] [OPENSUSE 11.2] - openSUSE Forums, and I see another thread here: Suddenly No Wireless Network Card - openSUSE Forums... but I can not tell if what I have is the same problem, so I did not add to those threads. In my case I can scan for the network, and see the SSID. An ip address is assigned. But a ping does not work.
Some details, the wireless is:
Code:
04:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5300 AGN [Shiloh] Network Connection [8086:4235]
Subsystem: Intel Corporation Device [8086:1121]
Kernel driver in use: iwlagn
In terms of installed apps:
Code:
rpm -qa '*wireless*'
wireless-tools-30.pre8-5.1.x86_64
wireless-regdb-2009.09.08-2.2.noarch
[code]....
I know the router wireless network is good, because I can connect to the router via wireless with another laptop (old Fujitsu-Siemens Amilo 7400M with older Intel wireless), and the router wireless also works with this Dell Studio 1537 PC (with same hardware) but with openSUSE-11.3 milestone7 version.
OpenSUSE Wireless :: Wireless Suddenly Not Working While Laptop Running?
Mar 31, 2011I have Lenovo G550 and openSUSE 11.4. Everything's ok, wifi without problems, I could connect to anywhere I wanted to, but yesterday while laptop was running and was connected actually by wire to internet, after removing the wire I realized that I cannot connect to wifi (the laptop was hibernated during night) - even the light diode in the front of the laptop was not shining. I went to yast and realized that the wlan0 isn't enabled and there's new eth1 port. But the wlan by ifup I cannot start and the eth1 I cannot start as well.
View 4 Replies View RelatedOpenSUSE Wireless :: Wireless Not Working Dell Studio XPS 1645?
Aug 21, 2011I have a strange problem with my laptop and need your help in resolving it...i am using a Dell Studio XPS 1645..i have got everything working except the wireless.. and the real problem here is that the wlan detects the network but does not connect to it and will keep on looping back and forward doing the same thing again and again..I am using Opensuse 11.4 with Gnome 3 Shell..here is details of the commands that i tried using to fix the issue
# lspci
00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
[code]....
OpenSUSE Wireless :: Intel PRO 2100 Not Working - RF Killswitch Button Not Working At All?
Feb 18, 2010I followed the sticky about setting up wireless and I have come to an issue where the WLAN switch which is on this computer can be pressed, the light comes on, but no WLAN. When I looked in dmesg, this is what I get:
ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
firmware: requesting ipw2100-1.3.fw
eth0: Radio is disabled by RF switch.
When running iwconfig wlan0 heres what I get:
home/j-dub # iwconfig eth0
wlan0 unassociated ESSID off/any Nickname:"ipw2100"
Mode:Managed Channel=0 Access Point: Not-Associated
[code]....
Notice it says that the 'Radio is disabled by switch' in dmesg. I can press that switch until the end of the world comes and it does absolutely nothing but make the WLAN light put on a light show. And it shows the wlan to be unassociated with any clients. So, what are my options to get this Wireless up and working?
Computer/OS info:
Fujitsu-Siemens Amilo M7400
1.4GHz Intel Centrino R
40GB HD
Suse 11.1 KDE
OpenSUSE Wireless :: 11.2 And PRO/Wireless 3945ABG [Golan] Not Working?
Nov 13, 2009My wireless is not working after a fresh install of OpenSUSE 11.2. I cannot connect in KDE or Gnome. I installed cnetworkmanger and I can't get anything to connect. My wired network card on this laptop has been down for a long time. All I have is wireless. I have to roll back today to 11.1 if I can't fix it, but I really have been looking forward to 11.2 for some time. This is really a stupid bug to have in supposedly production ready software. Maybe I should add that in KDE knetworkmanager does not load by itself. I have to load it manually via console every reboot. I get this:
> knetworkmanager
Object::connect: No such signal QTreeWidget::itemDoubleClicked(QTreeWidgetItem*)
Object:: connect: (sender name: 'twNetworks')
It puts the icon in the system tray, and annoyingly hides it, so it took me a while to evern realize it was there. When I point my mouse at it, it says "Networking Information Not Available". When I click it, it says Network Management Disabled. cnetworkmanager spews out a bunch of errors and finishes by saying it can't find any .service files. I configured the device via 'Network Devices' in YaST. Hardware info says it is using the iwl3945 kernel driver. Everything was fine in OpenSUSE 11.1 and 11.0.
OpenSUSE Wireless :: Wireless Not Working For Compaq Presario
Apr 29, 2011I just finished putting openSUSE 11.4 on my Compaq Presario V5000. I have been trying for hours to find the answer of how to get my wireless card to work. I can't connect to my router wirelessly and the on/off button for the wireless mode does not light up when pressed.
As far as I can tell from what I have already tried, I have a broadcoamm wireless card. It is a bm4318. I have b43-fwcutter installed and I have tried updating my firmware through the terminal. I have also used 'sudo /usr/sbin/install_bcm43xx_firmware'. It appeared successful, but the laptop still cannot make a wireless connection.
OpenSUSE Wireless :: Wireless Not Working With KDE4?
Mar 15, 2010When I'm at uni I use the wireless internet. This works perfectly well. Due to some issues with another program I ended up installing KDE4 in addition to gnome, which I usually use. In gnome the computer can easily find and log on to the wireless network. However when I start a KDE4 session I can't get the wireless to work. I don't really understand why this is happening. I though it would use the same settings. How do I make the KDE4 wireless network manager use the settings from the gnome wireless network manager?
View 5 Replies View RelatedOpenSUSE Wireless :: Wireless Not Working Post?
Jan 29, 2011 I followed what I could of the "Primer on wireless issues" post and here's what I get:
/sbin/lspci
Code:
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express
[code]...
OpenSUSE Wireless :: Wireless Not Working When On Battery - On AC Everything Is OK?
Aug 15, 2011Problem as in title: on AC everything ok, but on battery my wireless is not working.openSUSE 11.4, gnome 3.0lspci:Code:03:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01)Subsystem: Askey Computer Corp. Device [144f:7179]Kernel driver in use: wl
View 6 Replies View RelatedOpenSUSE Wireless :: Wireless Not Working On HP-G60?
Nov 26, 2010I am running OpenSUSE 11.3 i had OpenSUSE 11.3 installed before and everything worked fine. I eventually went back to Windows for a bit. I have a Wireless Button that glows Orange. When I went back to windows it remained orange everytime I turned on my mp or woke it up. When I press it, it goes blue and wireless works. It was really annoying but I ignored it, I could never find a solution. I reinstalled OpenSUSE today, to find out Wireless doesnt work at all. I press the button but it remains Orange. My wireless adapter is a: Atheros Communications Inc. AR9285 Wireless Network Adapter.
[Code]...
OpenSUSE Wireless :: Wireless Not WORKING?
Aug 25, 2011I M USING HP G42 NOTEBOOK. JUST IIIIINSTALLED OPENSUSE 11.3.WIRED ETHERNET IS WORKING BUT WIRELESS IS ABSENT.I USE WIN 7 HOME BASIC AS WELL IN THE SAME SYSTEM AND WIRELESS IS WORKING.I M TOTALLY NEW TO THIS SO JUST ASK ME ANYTHING YOU ALL NEED TO KNOW AND I WILL COMPLY.
View 9 Replies View RelatedOpenSUSE :: Wireless Card Is Not Working
Feb 28, 2010I have an acer lab top and OpenSuSE 11.2 installed but now the wireless card is not working. With ubuntu I had a tool called jokey to install missing drivers. Does there exist a jockey version (rpm not deb) for OpenSUSE or is there i simillar tool.
View 1 Replies View RelatedOpenSUSE Hardware :: Wireless Is Not Working?
Sep 2, 2010I am regular user of windows, but one week ago I installed ubuntu, it was very cool and then I installed opensuse yesterday because I like its kde desktop. But i have problem with wireless, i can see my home wifi, but it doesnt connect. I have same problem in ubuntu, but it was solved when i change passphrase to 40/128 bt from 128 bt, but in opensuse, all i can see is 128 bt or 64/128 ascii. Also I m unable to play mp3 songs in opensuse
View 9 Replies View RelatedOpenSUSE Wireless :: BCM4328 On 11.2 Not Working?
Apr 7, 2010I have a macbook pro here that I have loaded OPensuse 11.2 onto.
The main problem is that it wont recognise my wireless adaptor.
I have installed the packman repository and installed the broadcom-wl driver.
OpenSUSE Wireless :: Driver Not Working
Mar 7, 2011recently switched from Ubuntu. But I'm finding it difficult to get my wireless card working. It's a Dell Wireless 1395 Wlan Mini card, but works with a broadcom driver(Ethernet card is a broadcom).
View 2 Replies View RelatedOpenSUSE Hardware :: Wireless Switch Not Working?
Sep 11, 2011I have a Fujitsu-Amilo series Laptop that I am trying to enable the wireless on. The Wireless button needs acerhk compiled from source, but I have been unsuccessful in getting it to compile. This is the only way that I have gotten wireless to previously work on this laptop with any Linux distro. This laptop absolutely requires acerhk or else I will get the following in dmesg:
[ 9.329495] ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
[ 9.329520] ipw2100 0000:02:06.0: firmware: requesting ipw2100-1.3.fw
[ 9.596922] eth0: Radio is disabled by RF switch.
The only way to prevent this is to install the acerhk module driver from Acer Hotkey driver for Linux, but I have tried to compile it and it seemingly won't work.
OpenSUSE Network :: DWA-125 Wireless USB Card Not Working
Mar 18, 2010I have a dwa-125 dlink wireless card which will not work. This is my first time using OpenSuse 11.2 (Well OpenSuse period). I had the same problem with Ubuntu 9.10 as well. If it will help the solution I used with Ubuntu is here: [ubuntu] Dlink DWA-125 Wireless Card Issue - Page 4 - Ubuntu Forums. I'd rather use OpenSuse than Ubuntu.
View 4 Replies View RelatedOpenSUSE Wireless :: MSI A6000 Wifi Not Working
Jan 9, 2010getting my wifi to work with opensuse 11.1 and i've tried everthing to get the driver installed.
So far i have downloaded the driver from rallinks website for the RT3090, I have tried to install the .tgz but its doesn't appear to do anything when i run thru the
# ./configure
# ./make
# ./make install
anyone managed to get the WiFi working using the RT3090??
OpenSUSE Wireless :: RaLink RT2860 Not Working Out Of The Box In 11.3
Aug 10, 2010Desktop PC with Trendnet TEW-642 PCI wireless N adapter (Ralink 2860 STA driver). Running openSUSE 11.3 X8_64 with KDE 4.4.4. Software Management and KNetwork Manager both identified rt2860STA as installed. However, KNetwork Manager's authentication window keeps popping up every few seconds and I cannot get wireless.
1) uname -r:
Code:
2.6.34-12-desktop
2) /sbin/lspci -nnk:
Code:
03:06.0 Network controller [0280]: RaLink RT2800 802.11n PCI [1814:0601]
Subsystem: RaLink Device [1814:2860]
Kernel driver in use: rt2860
3) dmesg:
Code:
[ 6.270671] rt2860sta: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.275290] alloc irq_desc for 21 on node 0
[ 6.275294] alloc kstat_irqs on node 0
[code].....
I have downloaded and extracted the latest rt2860.bin file from the Ralinktech website to Desktop but even as root I cannot copy it to /lib/firmware or replace the existing rt2860.bin file in /lib/firmware.
OpenSUSE Wireless :: Wlan Not Working ISL3886 (11.3)?
Aug 19, 2010after I upgraded from opensuse 11.0 to 11.3 the wlan doesn't work anymore. following the rules, how to post the trouble. I also updated the correct FW. What's wrong? packet missing?
Code:
# lspci
...
03:00.0 Network controller: Intersil Corporation ISL3890 [Prism GT/Prism Duette]/ISL3886 [Prism Javelin/Prism Xbow] (rev 01)
# dmesg
[code]...
OpenSUSE Wireless :: WiFi Connection On 11.4 Not Working
Apr 2, 2011I have installed Suse 11.4 recently and I'm trying to run the wireless connection and doesn't works.
Details:
card: pro/wireless 2200BG Calexico2
driver installed (as console said) kernel driver:ipw2200
hwinfo:
Code:
linux-4pom:/home/victorplata # hwinfo --netcard
25: PCI 604.0: 0282 WLAN controller
[Created at pci.318]
Unique ID: JNkJ.BmKY+aW7YM0
Parent ID: 6NW+.pbi2aV6ikBD
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:06:04.0
SysFS BusID: 0000:06:04.0
Hardware Class: network
Model: "Intel PRO/Wireless 2200BG [Calexico2] Network Connection"
Vendor: pci 0x8086 "Intel Corporation"
I have tried to connect by traditional method with YAST, just recognized one network call "Hotel Riga 228", but doesn't connect. Also I have tried to connect with Network Manager but this application doesn't recognize ANY w. network.
OpenSUSE Wireless :: Broadcom BCM4312 Working 1 Tries Out Of 10?
Apr 18, 2011I have installed b43 with the install script and I can see all wireless networks fine, but NetworkManager just keeps asking me for the WPA passphrase, despite it being correct. I tried disabling WPA on the router, but then the connection hangs at "Configuring interface" instad. I also tried with ifup, but I'm not sure I configured everything correctly. I don't get any smarter from the NetworkManager logs, maybe someone else can decipher them? tail -50 when connection doesn't work:
Code:
Apr 18 17:00:11 jan NetworkManager[1291]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Apr 18 17:00:11 jan NetworkManager[1291]: <info> Config: set interface ap_scan to 1
[Code]...
OpenSUSE Wireless :: Linksys WUSB54GC Not Working?
Jul 12, 2011The usb device scans in Windows with a driver but i can't find a linux driver so i installed ndiswrapper.
ifconfig does not list the wlan0 device. iwconfig lists wlan0 YaST2 doesn't find any networks. Ethernet works just fine.