I get segmentation fault error while trying to launch eric python IDE. I tried reinstalling a lot of times but with no use. I even tried using a different version but gives the same error. I am only installing it through rpms. here is the stacktrace.
[Code]...
(I also tried chmod to make it executable since the gdb said it is not in executable format.)
Having upgraded Debian Linux i386 squeeze release from kernel 2.6.30 to 2.6.32 everything works except X-server segmentation fault on launching a graphic program (CHIMERA, [URL]... I have successfully recompiled CHIMERA on the updated Linux, to no avail.
Below - between *** - the final part of "Xorg.0.log" reporting troubles. Before that, the log is identical to when X-server is working properly (reported in full between ).
[Code]...
I updated kernel to 2.6.31.12-0.1-desktop yesterday and now i have problem with shutdown.
Everything goes as usual and system shutting down, but after all monitor keeps to work, and computer also doesn't halt.The last two lines i see on screen are:The system will be halted immediately Segmentation Fault Also i hear that some cooler or may be hard disk stops after this. But monitor and the rest of computer are still working With previous kernel i had no this problem.Reboot command works normal
Some time ago I had to reinstall all my packages under 64-bit OpenSuse 11.2. After that I can't get Skype working - Skype always gives me "segmentation fault" when trying to execute it (from command-line).
I've followed steps recommended in wiki, I've tried different versions (32-bit as well as 64-bit RPMs) downloaded from different repositories (including old 1.4.0.xx). Nothing changes anything.
I don't have any webcam and I've never had one, so I guess it cannot be related to that.
as the title describes - php5-readline causes Segmentation fault on opensuse 11.2, on both my desktop and laptop, on all listed versions of php - 5.2.9, 5.3.0 and 5.3.1
View 3 Replies View RelatedAfter installing 11.3 as an update from 11.2 Kaffeine was working but Skype was not. Following various suggestions on this site I eventually got Skype working but now Kaffeine crashes every time I try to start it, this is the message I get:
Application: Kaffeine (kaffeine-xbu), signal: Segmentation fault
[Current thread is 1 (Thread 0x7f37268a1760 (LWP 26052))]
Thread 4 (Thread 0x7f37158fb710 (LWP 26054)):
#0 0x00007f3725043709 in pthread_cond_timedwait@@GLIBC_2.3.2 () from /lib64/libpthread.so.0
#1 0x00007f372612b951 in metronom_sync_loop () from /usr/lib64/libxine.so.1
#2 0x00007f372503ea4f in start_thread () from /lib64/libpthread.so.0
#3 0x00007f3723e2e82d in clone () from /lib64/libc.so.6
#4 0x0000000000000000 in ?? () .....
What it all means in very simple English and what an ignoramus can do to put it right? I should perhaps explain that although I have been using SuSE since version 9 I am totally incapable of understanding terminal work. I have so far managed, to a large extent, by trial and error but it seems that as versions get better it gets more and more difficult to fix problems. The help provided by OpenSUSE is very good but as one gets older it gets more and more difficult to remember instructions so that they can be followed - you need two pc's one being fixed and a working one to provide the instuctions side by side!
Is there a general command which gives information what exactly causes a segmentation fault to an application. Some application have not options like debug , launching the application from a command line returns "segmentation fault" as result. That does not give information what make the application to crush , especially if another application or a plug-ins messing up with the launched application.
View 5 Replies View RelatedI am using openSuse 11.0 and have installed Thunderbird 3 (MozillaThunderbird-3.0.0-15.1) from the mozilla/openSUSE_11.0 repository of the build service. Thunderbird does not start, upon invoking it I get an instant crash with /usr/bin/thunderbird: line 130: 12025 Speicherzugriffsfehler $MOZ_PROGRAM "$@" (Speicherzugriffsfehler is the german equivalent of "segmentation fault"). I do believe, that this problem is somehow caused by some failed LDAP access.
I am using an LDAP-based user account which causes the behaviour described. For testing purposes I created a local user account, which could start thunderbird 3 without a problem. Starting and stopping nscd did not work, neither did the removal of .thunderbird and .mozilla. Here are the final lines of an strace dump:
[Code]....
Choqok has been working fine until today. Now, every time I start my computer and boot into openSUSE 11.4 x86-64 Choqok loads asks for the KWallet password which I enter, it then loads, but within seconds it crashes with a signal 11 Segmentation Fault. How do I fix this? It was working the last time my computer was on which was yesterday. I have not changed anything since then.
View 1 Replies View RelatedI am amidst installing an MIT Kerberos server right now and I got stuck on the initialization of the realm. Whenever I issue the krb5_util create command I end up getting a segmentation fault, the principals don't get created and the server is still pretty much useless.
Code:
linux-z0kg:/var/lib/kerberos/krb5kdc # kdb5_util create -r METROPOLIA.LAN -s Loading random data Initializing database '/var/lib/kerberos/krb5kdc/principal' for realm 'METROPOLIA.LAN', master key name 'K/M@METROPOLIA.LAN' You will be prompted for the database Master Password. It is important that you NOT FORGET this password. Enter KDC database master key: Re-enter KDC database master key to verify: Segmentation fault Whenever I try to start the kadmind or krb5kdc services I get the following error:
Code:
Error. Default principal database does not If anyone has an idea how to solve this
This issue has appeared at least twice in the past few years, for Ver. 10 and 11, but I've not seen any answer other than a suggestion to file a bug report.
The NFS client, on 11.4, returns an unspecified error when started from System Runlevel:
YaST got signal 11 at YCP file Service.ycp:77
/sbin/yast2: line 423: 19958 Segmentation fault $ybindir/y2base $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS
Is this client not compatible with the wide screen format on my notebook?
overnight break Left both machines running at the end of the day. This morning, Runlevel can stop and restart NFS client with no problem. The remote directory shows up in the client's Dolphin and is the correct size and content. In the medical field they call this spontaneous remission. Hope it works for you too.
I have a problem with OpenSC while trying to use cardreader OMNIKEY CardMan 6121.I've installed drivers from manufacturer website (ifdokccid_lnx_x64-3.5.1.tar.gz).After that I run opensc-tool and everything seems to be OK.But pkcs11-tool gives me a "Segmentation fault" error. Firefox crashes immediately when I insert cardreader into USB. I've installed OpenSC PKCS#11 Module (/usr/lib64/onepi-opensc-pkcs11.so) on my Firefox.
I tried to debug using "pcscd -fd" and I saw that pcscd uses right drivers "ifdokccid".All this works fine for 6 months on openSUSE 11.2 x64 and it stopped working when I made clean install of openSUSE 11.3 x64.
I got a problem with Okular crashing. This is the error message i get
Excutable okular PID 4927 Signal: Segmentation fault(11)
The PID is a different number each time i try to open a file. What could be causing this.
I recently bought an HP OfficeJet 6500 AIO printer. Since the printer has ethernet connectivity, I have managed to setup the printer with the 32bit openSuSE 11.2, 11.3 machines I have in my network. However, the 64bit 11.1 is another beast. I cannot make the printer work. The default and updated from officials repos hplip does not contain the PPD file for the printer/scanner/fax.I added the "Printing" repository (Index of /repositories/Printing/openSUSE_11.1) and downloaded the 64bit versions of hplip, hplip-hpijs packages. Now, the issues:hp-setup does not run with "Segmentation fault" error! Although I can see the printer, setup and modify it's configuration, cups cannot print, not even a test page.The errors I have are:
Code:
Unable to execute /usr/lib64/cups/filter/hpcups: No such file or directory
Regarding the 1st error, I "solved" it by using the hplip-qt3 package from KDE_3 repository. And when I used that version of hplip, (3.10.9-4.2, instead of the 3.10.9-31.1 of the Printing repository), I had no more filter related problems (foomatic etc).For the second one, it is obvious that the problem is related to the location of the 64bit filters.The /var/log/cups/error.log has the following lines:
Code:
I [13/Jan/2011:20:50:52 +0200] [Job 60] Started filter /usr/lib64/cups/filter/pstops (PID 30039)
I [13/Jan/2011:20:50:52 +0200] [Job 60] Started filter /usr/lib64/cups/filter/pstoraster (PID 30040)
code....
I using a linux kernel v2.6.26.something. Distribution: OpenSuse 10.3. While writing a c program on linux in KATE, i used character pointers to declare a string like, for ex: " char *temp " but compilation with gcc gives me the error," Segmentation Fault " what is segmentation Fault Why does it occur or what are the reasons behind it?
View 14 Replies View RelatedI did a Yum update last Friday. It was done before 5.6 was released so I still have 5.5 + various updates. Yum is now giving me a segmentation fault when I try to run it. I believe it has to do with an improperly synchronized version of sqlite which was updated and then Yum stopped working. I'm guessing that installing the latest Yum RPM will fix the dependency issues. Will this throw me out of sync with for instance updating to 5.6?
View 5 Replies View RelatedVLC was behaving weirdly recently and when I've tried to run it with primusrun command (since I have optimus card) it gave me a segmentation fault
Code: Select allVLC media player 2.2.1 Terry Pratchett (Weatherwax) (revision 2.2.1-0-ga425c42)
Segmentation fault
I've read on google that issue has been solved by a few people from updating the microcode, but I don't even understand what microcode is, I'm also not sure whether I should install amd64 or intel package for it?
Here is my lscpu
Code: Select all$ lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
[Code] ....
my KDE is making segmentation fault. KDE is not required to restart but this segmentation fault is making every time (after 2 min) when i login to kde/fedora. this is making me annoying.. my linux info is following:
uname -r # 2.6.31.9-174.fc12.x86_64
KDE: 4.3.4 (KDE 4.3.4)
problem:
[code]....
I just have installed Karmic Koala and have a problem running Firefox. I`ve seen that this is quite a common problem, but since I`m a newbie, I have no idea what to do. I have not found any solutions that would solve my problem yet. Every time I try to load a website including flash advertisings, Firefox just quits.
All the time I get this output.
Code:
I was in the process of installing something via apt-get. The laptop crashed halfway through, and now I cannot install anything new, do any updates/upgrades. I also cannot open Synaptic.When running apt-get in the terminal I get the following error:
Segmentation fault
I've been looking for an answer for this around all forums, but nothing works.So far, I've tried:
Editing "/etc/apt/apt.conf.d/70debconf" and adding
Code:
APT::Cache-Limit "33554432";
[code]....
I just made a pretty simple program in geany (GCC with default options)and I ended up with Segmentation fault. program is pretty simple and it performs binary search on an array.I know what segfault is but here I m clue less about why it is happening.and one thing more, the program runs fine in turbo C++ compiler.Same thing happened earlier too when I was making a program which included some simple string manipulation
View 1 Replies View RelatedI am programming an application with an ARM device with an embedded version of Linux. My application talks to a java application via socket. If there is any connection problems, it attempts the connection again. My problem is that after exactly 146 times, there is a Segmentation Fault. Apparently this happens in opening the socket, which is not successful after this amount of attempts.
Following, some code that I'm using:
The function for openning the socket and perform a connection:
Code:
What different between Segmentation fault and aborted
When I read about dbg I make different reason from the tutorial ....with the same code
Example in tutorial the gdb Display a message like this
Code:
And in my computer I have
Code:
I want to know what the different between them
I have a problem with a directory which contains my music collection. It can't be opened; all other directories work fine. I can cd into my ~/Music directory, but ls gives segfault and KDE programs hang when trying to open this directory. The problem probably has appeared after the rename of subdirectory under the Windows (don't remember particular ext3 driver; can check tomorrow).fsck says that the partition is fine. The whole disk is mounted on the single partition. Windows is located on another physical disk.Is there any way to recover my directory?
View 4 Replies View RelatedI have a centos server running nagios for monitoring. I restarted the machine, it is actually a console server anyway. After getting to the login screen, I typed in my user name but it never propt for my password. I can't even ssh into the system. So I tried to use the installation cd and enter into rescue mode where I typed chroot and was able to enter into the root environment. I was able to configure a network interface in the rescue mode and can ping the machine at this point, though can ssh still. In the root environment, I tried running couple commands. like try to restart the sshd. When I typed /etc/init.d/sshd restart, I got an error saying:
766 segmentation fault.
when I vi any thing I get error:
segmentation fault.
how can I solve this problem? What is causes this. Even in the event of restarting the machine, I see so many fails with segmentation fault.
I wrote a small c-code, which is based on a pseudorandom-alogrithm from the internet[URL]If i compile the code with "gcc test.c -o test -O2" the output is: "4194449".That's ok.I can compile the code without optimizations and the outut is the same.But if i compile the code with "gcc test.c -o test -O3" it creates a segmentation fault. But why? why this happens?Here the code:
Code:
#include <stdio.h>
// Code based on http://www.dreamincode.net/code/snippet342.htm
[code]....
simple program to create a segmentation fault:my problem is if i include the same code char *s="hello world"; *s='H'; in my project, it is not giving any seg fault, instead it runs without any problem. what may be the issue.
View 13 Replies View RelatedI would just like to ask why my red hat cannot log a segmentation fault in any of the log files located in / var/ log. I purposely tried executing a C++ program that segfaults but nothing was logged.
View 3 Replies View RelatedWhen I compile my C program on SUSE, I receive a segmentation fault error. To my knowledge, this occurs when a program tries to recall memory but is not allowed to. So I'm using GDB for the first time to solve this problem. After a series of commands, I reach this point:
Code:
#0 0x00002b13e1bab127 in getdelim () from /lib64/libc.so.6
#1 0x000000000040167b in main () at dmsp_cusp.c:158
Here's the offending code in dmsp_cusp.c:
Code:
157 printf("enter the input file name:");
158 getline(in_fname);
159 fp3 = fopen(in_fname, "r");
160 if(fp3 == NULL) {
161 printf("can't open input file %s",in_fname);
162 exit(1); }