OpenSUSE :: OpenOffice.org 3.2 Crashes On 11.3 With GNOME?

Sep 8, 2010

When I've installed openSUSE 11.3, OpenOffice was asking me to install JRE, and I did it. However, next time i run it, it crashed without any error log. When I run it again, it sad a couple of time that JRE is defective, and asked me to reinstall it again. Eons passed, but my patience was rewarded. OpenOffice.org Impress was up. but just for a few seconds. Then it crashed again, and left no signs of life. I've repeated the same cycle few times... Then I decided to search for a solution, and read topics where similar problems were discussed. One solution was to expand my swap memory, and the another one was to install an older version of OO. I wasn't very eager to install an older version of OO, so I tried to expand swap memory by cutting memory from the other partitions. I found reference that swap memory should be twice bigger than RAM. Since i have 512 + 256 MB RAM, I've typed 1536 MB as a new value for swap memory. Error appeared that value of swap memory must be between 42MB and 684MB. I'm not sure about the second number, but it was between 600 and 700... I must get OpenOffice.org working as soon as possible, because it's very important for my work. I'm running 64bit openSUSE 11.3 on AMD Sempron 2800+ with 768MB RAM using OpenOffice 3.2.1.4-1.2 and java-1_6_0-sun

View 9 Replies


ADVERTISEMENT

OpenSUSE :: OpenOffice.org Base Crashes

May 10, 2010

Every couple of hours OOo Base crashes - just closes the program of its' own accord.

Annoying enough in itself, but at least it usually recovers up to the last point I saved my work. The last time it happened though it didn't even recover to my last save point - it recovered to an old save point! So I have lost 30 minutes' work.

View 3 Replies View Related

OpenSUSE :: OpenOffice Crashes On Start In 11.3?

Aug 12, 2010

Recently OpenOffice has started crashing on me when loading the program. The splash screen will appear for a moment then the KDE crash handler comes up. Here's what I get when launching from the console:

slomojo@linux-yiyy:~$ ooffice
KCrash: Application 'soffice.bin' crashing...
sock_file=/home/slomojo/.kde4/socket-linux-yiyy/kdeinit4__0

I've tried deleting the .ooo3 directory in my home directory but that doesn't seem to help. Also, I'm running with Sun's JDK in case that makes any difference. I know that OpenOffice was working fine for me immediately after my fresh install of 11.3. I only use OpenOffice once every couple of weeks so I'm not sure if there was a specific update or anything that broke things for me.

View 7 Replies View Related

OpenSUSE :: OpenOffice Crashes While Loading Literature Database?

Nov 15, 2010

I have a strange problem which I've encountered for a long time but still weren't able to solve it. In openoffice writer, when clicking on extra->literature database the program immediately crashes. I encounter this problem with all the latest versions of Oo (3.2,3.1...) and on OpenSuse and on Kubuntu, so I guess it must be a widespread problem.

View 3 Replies View Related

OpenSUSE :: OpenOffice Crashes: "Failed To Create XIC" In Command Line?

Jan 7, 2011

Whenever I used "Ctrl+S", "Ctrl+O", or any other keyboard command that opens a KDE FileDialog, OpenOffice crashes every time. OpenOffice produces the dialog closes it and produces another two and then crashes. This happens from every OpenOffice program. Running OpenOffice from the terminal, the error that it outputs is "Failed to Create XIC".If I just access the same commands using the mouse such as Clicking "Save As", "Open", or any other command that opens a KDE FileDialog OpenOffice does not crash.The error is very similar to that of "http://web.archiveorange.com/archive/v/wmeLD7sxJO78TtWLhIm8".OpenOffice 3.2.1scim 1.4.7-174.1KDE 4.4.4openSUSE 11.3 64-bit

View 1 Replies View Related

OpenSUSE :: Gnome 3 - Desktop Search (tracker-needle) Crashes / What To Do?

Apr 24, 2011

The desktop search (tracker-needle) crashes as soon as it starts to search.
I'm running Gnome 3 with openSUSE 11.4.
The tracker services are running.

The error message when run in a terminal code...

View 1 Replies View Related

General :: OpenOffice Crashes After Run It After Installation?

Sep 19, 2011

I've installed OpenOffice 3.2.1 on Linux s390x System z server after downloading the OOo_3.2.1_Linux_S390X_install-rpm_en-US.tar.gz file from [URL].. I installed it using the following command rpm -ihv *.rpm. Now everything installs successfully with no errors. But when I cd /opt/openoffice.org3/program and type in soffice to start OpenOffice I see the splash screen for a second, the loading bar moving to around 33% before it crashes and shuts down with no errors or exceptions. Have tried uninstalling and installing many times with no sucess whatsoever. Last few lines of strace ./soffice added below,

[Code]...

View 1 Replies View Related

OpenSUSE :: Gnome-panel On Left Side Ofscreen Crashes / When Too Much Programs Loaded

May 11, 2010

My gnome-panel is at the left side of my screen (I use the 'splendid' cairo-dock at the bottom of my screen). But when more than eight windows are open, the dock freezes. The 'Computer' button works, as well as the tray icons. My CPU rushes to 26% constantly. Solution is to kill gnome-panel and it reappears without complaining (if few than 8 windows open).

View 2 Replies View Related

Debian Configuration :: Openoffice.org Base Crashes?

Jun 22, 2010

I am trying to start OpenOffice Base (3.2.0) but it keeps crashing once I begin to edit a new data base. Calc, Writer and Impress work fine.

ramack@ramack2:~$ soffice -base
ramack@ramack2:~$ libgcj failure: gcj linkage error.
Incorrect library ABI version detected.  Aborting.

I haven't a clue as to how to fix this one. A web search finds a Debian bug that a couple years+ old. The bug has since been resolved. It crashes if run as root too

View 2 Replies View Related

Ubuntu :: OpenOffice.org Crashes When Writing In Writer

Jun 9, 2010

I have the problem that whenever I write something it freezes up the window, my processor use rise to 100% and then it crash showing the OpenOffice.org crash-screen. This only happens in Writer and not Spreadsheets, Presentation refuses to start.

Info about the system:
OpenOffice:
OpenOffice.org 3.2.0
OOO320m12 (Build:9483)

[Code].....

Edit: Reinstalling the entire package and rebooting did not fix this issue.

View 7 Replies View Related

Software :: Openoffice Crashes When Scrolling Menus?

Mar 23, 2011

I have just installed openoffice.org 3.3 on my archlinux (xorg + windowmaker) but it shows no text in menus but two scrolling arrows, and when try to scroll with them, it crashes. I've installed it following this wiki: [URL] Here is a screenshot..

[URL]

View 3 Replies View Related

Fedora :: F14 Gnome-applet Dwell Click Crashes Gnome-panel / Solution For It?

Nov 12, 2010

Seeing this on two systems that went through F13-F14 upgrade.

version: gnome-applets-2.32.0-1.fc14.x86_64

symptom: via right click on a gnome panel, perform "add to panel" and choose Dwell Click.
Gnome panel bites the dust with SIGSEGV at this point, restarts, and then you've got dwell click on the panel.

Anyone else seeing this, and better yet, have a solution?

View 1 Replies View Related

Fedora :: Add OpenOffice To GNOME?

Jul 20, 2009

I'm new to Fedora, so have me excused, if the terms below are not correct.

I started installing a lot of packages using "yum". Among the packages were OpenOffice.

Now OpenOffice is installed, but I would like to make it available from the Fedora GUI interface (I guess it is called GNOME?).

How to do this simple operation?

View 6 Replies View Related

Fedora Installation :: Openoffice 3 Crashes In Fedora 6 Whenever Keyboard Is Used?

May 30, 2009

I installed openoffice 3.0 from openoffice site (www.openoffice.org) in my Fedora Core 6 OS computer. However, while doing that I might have made some mistakes. I removed openoffice 2.4 and 2.0 by using openoffice uninstall. In fact, couple of occasions, I have uninstalled and again fresh installed openoffice 3.0 when I noticed that moment I pressed any key, the program crashes. I have by mistaken the script ooffice, thinking that it would automatically install a new one. But there is no ooffice. I have to call soffice for that.

View 2 Replies View Related

Fedora Installation :: Can't Open Openoffice 3.2 In Gnome / Resolve This?

Nov 11, 2010

I have installed open office using yum install.

To install OpenOffice you can use yum like:
connect to the internet
open a console
su -
root password
yum install openoffice.org-base openoffice.org-calc openoffice.org-calc openoffice.org-draw openoffice.org-draw openoffice.org-writer
(all on one line)

This will install the man packages for Openoffice. To see all packages available for OpenOffice use:

yum list openoffice*

I am running fedora 14.

I have no openoffice icons on the desktop, or items in the menus.

View 5 Replies View Related

Ubuntu :: Gnome / OpenOffice Lock-up When Scrolling Inside Documents

Feb 10, 2010

Thoroughly repeatably, OpenOffice locks up on me when scrolling inside documents. Here's the breakdown:

* Only happens when actively in the process of scrolling
* Doesn't matter if you use keyboard, mouse wheel, drag the scroll bar, or click the scroll arrows
* Always happens within 15 minutes of steady use
* Happens in both writer and calc -- haven't tested the others
* OOo freezes up and no longer repaints the window or responds to anything
* gnome-session peaks out at 100% CPU and stays there
* Currently running application continue to work fine
* Most applications (gnome-terminal, firefox, koffice) can no longer be launched
* Some applications (abiword) can still be launched
* Launching from icons brings up the spinner, but nothing else happens
* Launching a GUI app from a terminal, it looks like it runs on CLI, but nothing ever happens in the GUI proper
* X starts leaking descriptors and thus chewing up drive space at ~1M/s

Killing X and bringing up a new session puts everything back to normal, including CPU usage and drive space. This happens every time on my 64-bit Intel laptop and has persisted through several X/OpenOffice/kernel updates. It never happens on my 32-bit Intel desktop.

View 3 Replies View Related

Ubuntu Multimedia :: OpenOffice Makes Video Refresh And Gnome Crash?

Jun 30, 2010

Since upgrading to Lucid a few days ago I'm having intermittent problems (90% of the time)with opening OpenOffice files.When I open up a spreadsheet (.ods) in OO, (whether OO was already open or not) my screens go black, then flash on and off for 30 seconds (ish) as if trying to change the refresh rate.Sometimes this results in Gnome crashing and restarting itself. it settles down and is OK. On a few occasions I have had to change terminal and manually restart gdm.

Here's my environment;

Dell Latitude D620
nVidia GeForce Go 7300 (according to hwinfo)
Ubuntu Lucid 32-bit (upgraded from Jaunty)
2 GB RAM

I've got the recommended "NVIDIA accelerated graphics driver (version current)" hardware driver and the NVIDIA X Server Settings applet, which says my NVIDIA driver version is 195.36.24. I'm running dual screens (1440x900 and 1280x1024) using TwinView. After a flicker, here is what I find in the Xorg.0.log;

Code:

(II) Jun 30 12:17:42 NVIDIA(0): Setting mode
(II) Jun 30 12:17:42 NVIDIA(0): "CRT:nvidia-auto-select+1440+0,DFP:nvidia-auto-select+0+124"
(II) Jun 30 12:17:43 NVIDIA(0): Setting mode

[code]...

View 6 Replies View Related

Fedora :: USB Crashes While Copying On 15/GNOME 3?

Jul 12, 2011

This usb crashes every time copying about 1,200 files of size 800k - 1.2m. Some right away and others randomly. Using the file manager and dragging the image folders from the USB to the local drive. Upon the crash, the USB cannot be used for anything until the system is rebooted.Below are the error messages from GNOME 3 and dmesg GNOME 3 messages:

Error splicing file: Input/output error

A dialog window would ask to Cancel, Skip All or Skip. but by this time the USB had already stopped.

dmseg output:

[ 333.560089] usb 2-2: new high speed USB device using ehci_hcd and address 3
[ 333.676405] usb 2-2: New USB device found, idVendor=058f, idProduct=6364
[ 333.676411] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[code].....

View 6 Replies View Related

Ubuntu :: Gnome Do 0.8.2 Crashes When Using Ping.fm?

Jan 3, 2010

I am using Gnome Do 0.8.2, which I added using the PPA. It is great, although when I summon Do, and type a Ping.fm status, and press enter, Gnome Do crashes with this output:

Code:
Exception in Gtk# callback delegate
Note: Applications can use GLib.ExceptionManager.UnhandledException to handle the exception.
System.ArgumentNullException: Argument cannot be null.
Parameter name: element

[Code]....

View 1 Replies View Related

Debian Multimedia :: Gnome Crashes On Login

Jun 22, 2015

I was using Debian (jessie) testing for quit a while now, and since jessie is now the new Stable I wanted to update to testing again.

And I have an issue now, and I can't tell if it is a really a bug, or some new packages are interfering with my configuration files. Well to be honest I have more than one issue, but I am guessing that at least a few of them are related to the same issue.

Whenever I startup my Debian(testing) system, I get the gdm3 login prompt, I type in my password and hit Enter. Than there is a: “Oh no, something went wrong”-window for an blink of an eye (1-2 seconds).

After that gnome starts (almost*) normal .[gnome version 3.16.2]

*But: the gnome-sound applet doesn't start correctly. Alsamixer is running but Pulseaudio seems not to. When I start Pulseaudio manually after that everything with the sound is fine.

The most annoying thing is, that none of my Shortcuts work anymore ( Ctrl+Alt+T for terminal, Ctrl+<anything; Fn+<anything> screen brightness for example; hardware Volume Up/Down keys [Thinkpad x230t])

I checked my costume Shortcuts, Ctrl+Alt+T is set in the keyboard settings.

I have two monitors connected (its a laptop so it the build in and an external). I tried to disconnect the 2nd monitor and restartet the problem persists . Everything else seems to work fine (at least I haven't found any other issue yet). I would be glad to add some Log files, but I don't know exactly which one I should attach.

I attached the Xorg-log since it seems to me that something went wrong there:

115.284] (WW) Falling back to old probe method for vesa
[ 115.284] (EE) intel(0): [drm] failed to set drm interface version.
[ 115.284] (EE) intel(0): Failed to become DRM master.
[ 115.284] (II) UnloadModule: "intel"
[ 115.284] (EE) Screen(s) found, but none have a usable configuration.

[Code] .....

View 2 Replies View Related

Fedora :: Gnome Panel Crashes On Boot?

Dec 7, 2010

i've just upgraded from F12 to F14 and my gnome-panel crashes on startup every 2-3 boots. where to look for error messages and stuff so i can resolve the problem, becouse it's really annoying.

View 4 Replies View Related

General :: Gnome - Navicat 8/9 Crashes My Debian?

Dec 9, 2010

I run Debian 5 + Gnome and it seems that after I made certain updates with aptitude, whenever I run a query in Navicat ( sql program that runs on WINE ), as the results are being presented linux goes into the command line and the GUI dies and it restarts and it asks me to login again ( all my programs crash ).how I could go about debugging this? I suspect it's some issue with Gnome and WINE, but I'm not sure.

View 1 Replies View Related

Ubuntu :: Changing Background Crashes GNOME

Jul 9, 2010

Been trying to get mac4lin to work, and in the process, I attempted uninstalling, rebooting, then reinstalling gtk-engines-pixbuf. This has now screwed my system so that the background is a light grey and any attempt to change the wallpaper just makes X crash, forcing me to Ctrl Alt Backspace. I'd rather avoid a reinstall of the system since I have it customized to my needs, so is there a solution to this? I tried reinstalling the pixbufs package, but no dice.

View 1 Replies View Related

Ubuntu :: Gnome 3 Random Crashes / Resolve This?

Jun 4, 2011

About 1-2 times a day (3 today and it's just 9 AM here...) Gnome 3 decides to just not care about me any more, crashes and logs me out. No warning, no error on screen, just some black screen with text (like when shutting down the computer and it's stopping services) which lasts half a second, then back to the login screen.

Any ideas what might be wrong or where I could find some logs to post them here?

View 1 Replies View Related

Ubuntu :: VLC Player Crashes Gnome Desktop

Jul 6, 2011

Ever since I upgraded to 11.04 the vlc player crashes the Gnome Desktop every time I use it.

View 2 Replies View Related

General :: Gnome-globalmenu Crashes Emacs / What To Do?

Jan 14, 2010

I've recently tried gnome-globalmenu-0.9.7 on my Linux Mint Helena and it causes Emacs to crash whenever I disable and re-enable the menu-bar. Is it just me or has anybody else noticed this?

View 1 Replies View Related

CentOS 5 :: 5.4 Gnome Cdplayer Crashes With Audio Cd In Either Drive

Nov 4, 2009

Recently updated 5.3 to 5.4. The easiest upgrade yet thru yum! (Ubuntu9.04 to 9.10 failed.) Have latest yum updates including kernel(2.6.18-164.6.1.el5). Trying 2 other 2.6.18-164* choices makes no difference. When insert cd in either drive and click on Apps.>Sound&Video>Cd player get crash. Even get bug-buddy open as soon I insert cd without clicking on cdplayer. Trying to send report with bug-buddy gets me a notice that bug-buddy failed and "to try newer gnome version". Vlc works fine since it allows selecting which drive to use. Cd player doesn't give me chance to select drive before crashing. It used to.

View 2 Replies View Related

Fedora Hardware :: F15 Separate X Sessions Gnome Panel Crashes

Aug 18, 2011

I am starting to get more used to Fedora 15 and GNOME 3, but I still have one outstanding issue remaining. Before explaining the problem, I am using GNOME 3 in Fallback mode because I prefer the look and feel of the gnome-panel over the gnome-shell. Plus, I have performance issues using x11vnc in regular GNOME 3 mode that I do not see in Fallback mode. I cannot use Separate X Sessions (TwinView "0") and get the gnome-panel to launch without crashing. The gnome-panel works fine when I set the screen back to TwinView "1".

Here are the error messages when running from a terminal window:
(gnome-panel:5205): Gtk-CRITICAL **: gtk_style_context_get_background_color: assertion `priv->widget_path != NULL' failed
(gnome-panel:5205): Gtk-CRITICAL **: gtk_style_context_get: assertion `priv->widget_path != NULL' failed
Segmentation fault (core dumped)

Versions:
rpm -qa|grep -i gnome-panel
gnome-panel-libs-3.0.0.1-4.fc15.x86_64
gnome-panel-3.0.0.1-4.fc15.x86_64
gnome-panel-devel-3.0.0.1-4.fc15.x86_64 .....

View 1 Replies View Related

Ubuntu :: Switching To A Virtual Console While Logged Out Crashes GNOME?

Jul 16, 2010

If I am logged out of GNOME and switch to tty1 and back, I get a stream of errors (which I can't copy...) on a black console. If I am logged in I am fine. This is very annoying because I would like to be able to log out of GNOME while I am running particularly memory-intensive scripts (they approach the limit of my 3.8 GBs of RAM).

View 7 Replies View Related

Ubuntu :: Gnome-Do Crashes While Posting Status With Twitter Plugin

Aug 2, 2010

having problem dealing with gnome-do, before this, I never have problem while tweeting with the tweeter plugin in gnome-do.Now, when I want to tweet up with gnome-do, the gnome-do suddenly crash and I need to open it back via Application to make it use back again.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved