I installed dante from yast on opensuse 11.4 and edited /etc/socks.conf to reflect my network configuration but when I try to socksify a command, nothing happens. Even a non-network command, such as "ls -l" does nothing when preceded by socksify.
View 9 RepliesI'm going to make this as easy as possible for everyone to understand my thoughts. I am trying to install dante socks server on bt4. I'm using the root account incase someone asks.Information on what i have and want:
Code:
root@bt:/# uname -a
Linux bt 2.6.30.9 #1 SMP Tue Dec 1 21:51:08 EST 2009 i686 GNU/Linux
Code:
root@bt:/# apt-cache show dante-server
Package: dante-server
Priority: optional
[Code]...
So what do you guys think i should do? Apart from searching on google wich i already did, but then again i'm no linux expert so i'm not sure what to look for.
I'm trying to configure dante so that it only connects to the internet through the PPTP VPN interface (which is ppp1). My configuration file is currently like this:
Code:
internal: 127.0.0.1 port = 3333
external: ppp1
method: username none
logoutput: stderr
user.notprivileged: abc
[Code]...
I use an internet connection with a proxy. I have set the proxy in Firefox and systemsettings so now I can browse the web and I can ping Google from Console. But when I start Software Management, it says "Cannot access installation media". Whats wrong?
View 3 Replies View RelatedI'm new to SuSe and lateley I was trying to establish a Network, when some weired problems occured. I was able to establish the network and i have connection to the internet. The suse-machine is rechable by ping from all the other computers in the network. If I'm tryiing to ping the other computers from the suse-machine, nothing happens. The router responds without packet loss, but every other ping occurs in:
From 192.168.2.6: icmp_seq=2 Destination Host Unreachable
From 192.168.2.6: icmp_seq=3 Destination Host Unreachable
From 192.168.2.6: icmp_seq=4 Destination Host Unreachable
From 192.168.2.6: icmp_seq=5 Destination Host Unreachable
I've been searching for some ideas to solve this problem but couldn't find any.
I can not get my network to work.Wireless shows no networks at all and wired the ethernet light does not even turn on. I have dpne heaps of searching but i can not seem to find a solution.
View 6 Replies View RelatedI am using open suse 11.1 in my acer emachine laptop. Everything is okay except Network cards are not working. It says that firmware is missing or kernel problems. My network cards are Broadcom network cards. How can I fix it?
View 9 Replies View RelatedI have a fresh install of openSUSE 11.4 with KDE. This includes ALSA and Pulseaudio.
I have a mic and speakers and a webcam. As far as I can see microphone and sound reproduction work, the webcam also works:
- I can arecord and aplay
- KMix works
- amixer and alsamixer work (I am using microphone boost)
- test sounds play
- the webcam works in "Personal Settings (Configure Desktop)": Hardware > Multimedia > Phonon (test camera)
- Pidgin and Empathy work with sound and video.
(had to set this: gconftool-2 --set --type=string /system/gstreamer/0.10/default/audiosrc pulsesrc,
without this setting it was set to alsasrc by default and Pidgin and Empathy didn't work).
I installed Skype 2.2 (also tried 2.1) and tested the video camera in Skype. Result: doesn't work.
I made a test call: I hear the voice of the lady answering the call, but my own voice is not recorded.
In Skype everything is set to use Pulseaudio.
I am at a total loss to understand what is going wrong here. Why does Skype not work, when everything else does??
I made this observation:
When an application records something, a "Capture stream" shows up in the KMix "Capture Streams" tab. For example, when I use arecord, "ALSA capture" shows up, while I record. When I make a call on Empathy, a capture stream shows up in the said tab.
When I make a Skype call, NO capture stream shows up, so obviously Skype is not capturing anything.
I'm having some trouble setting up ssh on Suse 11.2 x64
Login with pubkey and/or password works fine over lan :
Code:
slack@mint ~ $ ssh mick@192.168.2.5
Last login: Fri Apr 2 16:44:50 2010 from 192.168.2.14
Have a lot of fun...
mick@linux-s1s2:~> exit
[Code]....
I'm running 11.2 on a Dell PowerEdge1850. In the normal kernel, bonding is working just fine on the two ethernet ports. When I reboot into the Xen Kernel, I get the following error at boot:
FATAL: Error inserting bonding ... : Unknown symbol in module...
dmesg shows several Unknown symbols. In the end, the module is never loaded.
If I reconfigure the network in Xen to not use bonding, it works fine.
I recently upgraded from 10.3 to 11.2, keeping 10.3 and using Gnome. I can't get web access through various browsers but can ping outside IP's and the ISP DNS works. I'm connected through a DSL modem.
The browsers tried so far include Firefox 3.5.4 -> 3.6, Konquerer, and Lynx.
I have used the Network manager in Yast to make the changes and have compared network files in both 10.3 and 11.2. The settings are the same.
I am having trouble getting ANY publickey to work against OpenSuse 11.3's SSHd. I have tried generaating them on Fresh installs of 11.3 as well as on windows, Freebsd, Opensuse 11.1, OpenSuse 11.2, Mac OSX leopard (PPC), and Fedora. None of them work and it falls back to password authentication when trying to connect to a OpenSuse 11.3 SSHd.
sshd -ddd log output:
debug2: load_server_config: filename /etc/ssh/sshd_config
debug2: load_server_config: done config len = 926
debug2: parse_server_config: config /etc/ssh/sshd_config len 926
debug3: /etc/ssh/sshd_config:13 setting Port 22
[code]....
I'm trying to setup NAT for modem0 (ZTE MF100 HSDPA modem) under OpenSUSE 11.3 64-bit, however it's not working. The same configuration works with eth0. eth1 is connected to the internal network. These are the commands I used:
For eth0:
echo 1 > /proc/sys/net/ipv4/ip_forward
iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
iptables -A FORWARD -i eth0 -o eth1 -m state --state RELATED,ESTABLISHED -j ACCEPT
iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT
[Code].....
After 2 years of good service and after I've changed IP addresses in the router from 192.168.1.2 to 192.168.1.102 my autofs stopped mounting my NAS with NFS. That was the only change.
View 8 Replies View RelatedI have setup samba server, set NMBD, SMBD & NTPD from system services and set apparmor to complain but I am still unable to read any network drives. I have checked the firewall and seen that samba is set to enable for internal allowed services. Also should I be changing the NMBD, SMBD & NTPD to complain from App armor?
View 9 Replies View RelatedI was wondering if anyone else is having trouble getting updates. I ran the software update out of the control center when I first installed 11.4 with the gnome desktop.I ran the yast online update and got what was on there, but now it just gives me error messages, basically it's stating it can't connect to the repositories.
View 1 Replies View RelatedMy laptop is configured to boot openSUSE 11.1, Vista, and Win2k. Access Point is AirLink101 (Atheros Based).Laptop is Acer Aspire 9410-2028.Win2k wireless speed is 108 (using Atheros Drivers)Vista Wireless speed is 54 (using windows drivers)openSUSE 11.1 Wireless speed is 12 (Using MadWiFi)When I was on 10.3 it ran at 108 on 11.0 it was 36. 36 is not 108 but it was solid 36. I tried using networkmanager and speed went down to 1. Each new version of openSUSE has caused a drop in wireless speed.lspci |grep Atheros0a:05.0 Ethernet controller: Atheros Communications Inc. Atheros AR5001X+ Wireless Network Adapter (rev 01)
View 2 Replies View RelatedI have a SuSE server (sorry but no idea what version of SuSe it's running.. I'd take a guess at 10.0) on a network with several other SuSE servers. They are all able to be SSHed externally as well as internally and all have their local firewalls disabled. I just had to reboot one of the servers and it is behaving quite strangely. I am able to SSH in and out of it externally, but can't SSH in and out of it internally.
When trying to SSH out internally I get the message:
"ssh: connect to host *.*.*.* port 22: No route to host"
When trying to SSH in internally I get the message:
"ssh: connect to host *.*.*.* port 22: Connection timed out"
Using ssh -v doesn't give any more useful information.
I have double checked that the IP is correct and that the internal firewall is disabled etc. The external firewall hasn't got anything that would prevent it (and shouldn't be an issue anyway as it's an internal only problem... SSH externally works fine). Also, it might help to know that I have the same problem with ping. I can ping this server from an external system, but not from an internal one.
I`ve the following internet configuration at home -
WORLD
to
ADSL modem in BRIDGE mode with DHCP
[code]....
All internet browsing function are ok, but when I try to upload file using sftp to a remote compute - it hangs. This is not a problem of remote computer. Download is working ok. I disabled firewall on wireless router but this did not help.
I've just installed openSUSE 11.2 (KDE 4.3) on my Dell 1720 lapcrusher (a fresh install - had no space to install next to my old openSUSE 11.0, so had to wipe that). I have a huawei e169 (e620) that worked fine in 11.0 (after some initial trouble/configuring, details of which I cannot remember) using knetworkmanager, but try what I might in 11.2 I cannot get this HSDPA modem to connect to my ISP (Virgin Mobile Broadband in Brisbane Australia).
I'm looking for some advice on where to start - first up the modem is detected fine in KDE 4.3, I can setup a profile with the correct APN "VirginBroadband" and "blank" inserted for username/password, and PAP enabled and CHAP disabled - thats pretty much how it was setup under openSUSE 11.0, and it will try to connect but always will not authenticate - I'm not sure at which stage of authentication the process goes pear shaped. I've tried different combos of turning on/off compression/echo options etc, turning on/off MSCHAP/MSCHAP2, but to no avail.
I was trying to activate my wireless connection .... in turn did something that triggered eth0 no-carrier when "ifstatus eth0"
View 2 Replies View RelatedI have a dwa-125 dlink wireless card which will not work. This is my first time using OpenSuse 11.2 (Well OpenSuse period). I had the same problem with Ubuntu 9.10 as well. If it will help the solution I used with Ubuntu is here: [ubuntu] Dlink DWA-125 Wireless Card Issue - Page 4 - Ubuntu Forums. I'd rather use OpenSuse than Ubuntu.
View 4 Replies View RelatedHe has a Samba 3.2 server on openSUSE 11.1. It worked fine with XP and Vista as a PDC. There are no NT servers on this office LAN. Now he has a W7 computer, and he was not able to sign on. From searching, it seems that an upgrade of Samba and a tweak of the registry are required. He did the upgrade to 3.5 from a supplementary openSUSE repo and restarted the server. But it seems he cannot sign on yet. I don't know if he did the registry tweak, I'm waiting to hear back.
The MS article: Windows 7 and Samba 3 interoperability
My question is: He seems to be under the impression that Samba 4 is required to work with W7, but that M$ article seems to contradict him. Has anybody got W7 working with Samba 3 as a PDC like in XP and Vista? I can't find any FAQs about this.
I desperately need to get my apache server on OPenSuse to use the worker MPM I have tried simply placing worker in the quotes of the apache file /etc/sysconfig/apache2 but when I stop and start apache in the task monitor it is still showing the httpd2 processes to be prefork. Also there seems to be a problem on restart saying it cant find MPM.
View 9 Replies View RelatedJust recently installed Opensuse 11.2 in a KDE environment. The problem I am facing is that when I connect it to my network either via wired or wirless neither getting internet or access to the network although the network manager shows the connection as active
I am using a Dlink Di-524 Wireless Router at home
The Wirless router for the computer is Broadcom BCM 4312
Was able to install the drivers for this from the packman repository
Also when I connect my laptop directly to the internet connection via wired it is working fine. However if i connect it to my wireless router either over wifi or thru wired it just shows connected but i can neither access internet or other computers on the network.
Have checked the wireless router other computers (windows and ubuntu are being able to access the internet via it)
Results of my ifconfig-a command when i am connected over my wirless connection code...
I'm new to OpenSuSE and have just booted up an Acer Aspire 4736z laptop with the 11.2 livecd. All of the specs (gathered from lspci -n) are available here: Debian HCL - Acer / Aspire 4736Z. Wired internet does not work. I have tried `modprobe atl1e` then `service network restart`to no effect. NetworkManager says nothing is plugged in (perhaps a hotplugging issue?). eth0 is listed in ifconfig.
View 3 Replies View Relatedi got everything working on my laptop, i just can't set up my network sharing..
I have a desktop pc running Windows 7, and this laptop running openSuse 11.1!
I use Gnome by the way... When i get to Network in Nautilus, i double click on Windows Network -> Workgroup -> Windows7PC, but at that point i don't see any folders or anything..
This is my smb.conf file:
Code:
# smb.conf is the main Samba configuration file. You find a full commented
# version at /usr/share/doc/packages/samba/examples/smb.conf.SUSE if the
# samba-doc package is installed.
# Date: 2008-12-03
[Code].....
In firewall i added Samba in broadcast, followed some tutorial on the net..
I have just installed openSuse 11.2, but my network connection isn't working. I'm new to linux so i don't know how to approach this problem and how to diagnose what's the problem. Few information about my system: I have Asus X51L laptop with KDE installed. I have cable internet wired to laptop via ethernet network card. In Windows XP my connection is working without problems, but in Suse I have problemsThe main problem is when I enter Suse PC light (on modem) is not working, and it should blink (at least in Windows does). Cable and power light is turned on, and that's good.
View 9 Replies View RelatedI am with a customer who has Suse 10.1 in production environment and connected to the internet.For now I want to install denyhosts on this machine since I see lots of failed login attempts outside office hours.However when I do: python setup.py install I get the message File "setup.py", line 4, in ?from distutils.core import setupmportError: No module named distutils.coreI don't know how to solve this. I have added a repository to install distutils.core but could not find it
View 1 Replies View RelatedI got the WMP300N installed by using ndiswrapper, but in Network Settings in YaST, I enter in all the info, and it will not connect. I set the Module Name as ndiswrapper, but it still won't connect. I blacklisted bcm43xx as some guide told me to. Could that be the problem?
View 2 Replies View Related