OpenSUSE Install :: 11.4 Installations And Invalid Screen Settings

Apr 26, 2011

SuSe 11.4 install problem. I've installed 11.4 and have the following sequence of events
Power on - dell hardware boot options
Grub
Choice of
Standard suse boot
Safe mode
Windows 1
Windows 2

Choosing standard goes through a boot sequence but leaves me with a invalid screen setting with a scrambled display. Are there any options I can provide grub with that will enable me to boot and trouble shoot the system?
Grub has
vga = 0x348
The graphics are
NVidia geforce 6150se
Monitor
Dell 22 inch widescreen
SuSE 11.1 worked fine and the windows side works fine.

View 9 Replies


ADVERTISEMENT

OpenSUSE :: Install AWN For A Month Now On 3 Different 11.2 Installations And Kde And Gnome?

Jan 28, 2010

I have tried to install AWN for a month now, on 3 different 11.2 installations and kde and gnome, and would really like to know why I can't install it. I have tried:

- packman 1-click
- packman individual package installations
- rpm installation

and I keep getting these errors

- libawn1>=0.2.6 needed by avant-window-navigator-0.2.6-6.45.x86_64
- libpython2.5.so.1.0()(64bit) needed by libawn1-0.2.6-6.45.x86_64

and believe me I have tried to find these and have tried even similar looking things, no luck this is getting my opensuse experience down.

View 9 Replies View Related

OpenSUSE Hardware :: Max Screen Resolution - Screen Goes Blank When Click On The Display Icon In System Settings

Jan 11, 2011

i have just put a Geforce 7300 GT graphic card into my machine the problem is the max resolution I can get is 1024x768 at 60 hz the screen is a benq fp71g+. also the screen goes blank when i click on the display icon in system settings. i know that the screen can be run at 1280x1024 so I don?t know where the problem is.

View 3 Replies View Related

OpenSUSE Install :: Saving System Settings (yast Settings)

Apr 1, 2011

Is there a way I can save system settings and have yast revert to a config file in case I ever need to reinstall the system again? I hate having to configure the firewall, runlevels, samba shares, samba workgroup, apparmor, and all the other junk after every install. It's not like I install often, but should suse 11.5 or 12 roll out, I'd like it to be a snappy upgrade.

View 6 Replies View Related

CentOS 5 :: Black Screen During Installations?

Jul 29, 2011

when i install centos 5.6 on dell optiplex 990 i got black screen when anaconda start

my graphics card is Intel HD Graphics and i7 Sandy Bridge

View 4 Replies View Related

Ubuntu :: 10.4 RC - Your Audio Capture Settings Are Invalid

Apr 24, 2010

Running 10.4 Luci RC 64-bit desktop and when attempting to run Applications > Sound & video > Sound recorder, I receive the following error message:

Quote:

Your audio capture settings are invalid. Please correct them with the "Sound Preferences" under the System-Preferences menu. When I do go to System > Preferences > Input, there is only 1 device - "Internal Audio Analog Stereo" with no options for modification.My laptop does have an internal microphone but it apparently isn't working as nothing was recorded when I ran a Skype test call. This is the reason why I attempted to record something to check the mic.

View 1 Replies View Related

Ubuntu :: 11.04 - VirtualBox 4.1.0 (Invalid Settings Detected)

Jul 30, 2011

I'm running Ubuntu 11.04 on a Compaq Presario CQ62, with factory specs. I have downloaded and installed VirtualBox 4.1.0 r73009, and successfully installed Windows XP SP3 and Windows 7. However, I have now hit a problem. When I go to Settings for either virtual machine, I get an error that says "Invalid settings detected". It doesn't matter what I try to change or adjust, this message will not disappear. I do not currently have USB support for the Virtual machines, but it's not a big concern to me at this time. I don't know what commands I need to issue or what information I can offer to get the readout of what's not working right. I am very comfortable using Terminal, but have no idea what to look for or where to go.

View 4 Replies View Related

OpenSUSE Install :: Invalid Partition Table Error?

May 8, 2010

I installed openSUSE on a XP runnng computer and every thing is OK.When I tried to Install a new XP, I got this error:Code:Invalid Partition Table I fixed it by reinstalling GRUB using Rescue System.I tried fix mbr on XP Repair System and I got that error again.Now I want to keep XP and remove openSUSE. But computer only boots by GRUB and XP's boot loader is unable to boot and shows that error

View 9 Replies View Related

OpenSUSE Hardware :: Screen Settings Does Not Appear A Resolution Higher Than 1024x768

Apr 6, 2011

Recently I have acquired 2-port KVM switch. When the monitor is connected through this KVM in Windows 7 resolution is properly detected - 1280x1024. When I go under Linux (openSUSE 11.4 with KDE, nVidia 260.19.44) there is a problem with the resolution. In the screen settings does not appear a resolution higher than 1024x768. How do I set the desired resolution in Linux?

View 4 Replies View Related

OpenSUSE Multimedia :: White Screen After Visual Settings Configuration

May 7, 2010

I was configuring my visual settings and thinking that my pc could handle the max setting I enabled it. Now I cant see or do anything. Is there a way to reset them???

View 2 Replies View Related

General :: Fedora 13 - Cannot Get Any Of The Resolutions Settings To Look Right On Separate X Screen With The Nvidia X Server Settings Gui

Aug 21, 2010

I am using Fedora 13 x86_64 on a Acer Aspire 7730ZG laptop with: 01:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 9300M GS] (rev a1) I have kmod-nvidia-2.6.33.6-147.2.4.fc13.x86_64-195.36.31-1.fc13.2.x86_64 installed from rpmfuison when I plug in the hdmi cable to the tv, my tv says the resoultion is at 720p, and I can not get any of the resolutions settings to look right on seperate x screen with the nvidia X server settings gui. my tv is a vizo 42inch. also another question is their a way to set the video card to output at 1080? this might be part of my problem?

View 14 Replies View Related

OpenSUSE Install :: 11.1 KDE LiveCD - Invalid Or Corrupt Kernel Image

Mar 30, 2009

I finished downloading of "openSUSE-11.1-KDE4-LiveCD-i686.iso" file. I downloaded it by Opera WB. Then using Nero I burned this file to CD. But there is a problem with boot. Please, make a support to this problem. Maybe file, which is in a site opensuse.org is damaged?

After the reboot of computer this text appears:
ISOLINUX 3.63 0x49364136 Copyright (c) 1994-2008 H. Peter Anvin
Unknown keyword in configuration file.
Unknown keyword in configuration file.
Unknown keyword in configuration file.
Unknown keyword in configuration file.
Unknown keyword in configuration file.
Loading
Invalid or corrupt kernel image.
boot:

View 7 Replies View Related

OpenSUSE Install :: 11.4 Download - Invalid Data From Tracker Error

Mar 10, 2011

Has anyone tried to download 11.4 via Torrent? I use Ktorrent and I'm getting Invalid data from tracker error.
DVD and CD versions
Straight download seems to be working

View 4 Replies View Related

OpenSUSE Install :: Upgrade To 11.2 With Broken Zypper / Repository 'gwdg_suse11.1' Is Invalid?

May 24, 2010

When I attempt to refresh my zypper repositories, I get messages like:

Repository 'gwdg_suse11.1' is invalid.
File /var/tmp/TmpFile.vRNflE doesn't contain public key data

I've asked for help (which has been freely given) on these forums before, but nothing has worked, and I've been stuck with this error for many months now. In effect, my system is effectively non-upgradable.

However, I would like to upgrade to 11.2. Is there an upgrade CD, or should I just download the 11.2 DVD (at nearly 5GB) and choose the "upgrade" option from it?

View 9 Replies View Related

OpenSUSE Install :: Grub - Start Menu Is Gone - Windows Lizens Would Get Invalid

Jun 2, 2010

I can't turn on my PC and write jet from my neighbors notebook. Because of problems with Windows updates und ubuntu vpn I installed today Windows 7 again and then openSuse. It was OK. Than I began with set up of different Programms for windows, like WinRar, Avira Antivir ect... As soos as it was done I wanted to begin with set up of openSuse... But the start menu is gone - there is nothing there now! Last time I could choose betwee 2 windows partitions, openSuse start-partition and openSuse fall-Save. -Now there is only "grub>" line

And I doesn't have any idea what I can do, I doesnt know where are startfiles, where is /boot/grub order, I don't know how can grub be used also. But I know that if I try to register my windows 7 agan at the same day, my windows lizens would get invalid. Has someone any idee what can be done?

View 7 Replies View Related

OpenSUSE Install :: Cant Boot Xp - Invalid Or Unsupported Executable Format Chainloader +1

Sep 27, 2010

I was installing opensuse on the c partition and it gave errors so i aborted it now i click on windows and it says invalid or unsupported executable format chainloader +1 so then i proceeded to try and fix this by changing the menu.lst to this:

And now it tells me that disk isnt found so i need to know what to put in the menu.lst to load the actual windows partition and then fix the original error.

View 9 Replies View Related

OpenSUSE Install :: Gzip.c(line 508):gzip_x86_64 : Invalid Exec Header

Oct 11, 2010

whenever I tried to boot into V1 in the following, it hang.

# uname -a
Linux tadpole 2.6.32.12-0.7.1.1381.1.PTF-default #1 SMP 2010-05-20 11:14:20 +0200 x86_64 x86_64 x86_64 GNU/Linux
# cat /etc/*release*

[code]....

After using yast2 and install "xen" hypervisor, the bootloader show "V1" as label for Xen kernel, if I choose to boot into V1, it will just hang with very little message on screen:

ELILO boot: ...
V1
SLES11_SP1
Failsafe

[code]....

View 2 Replies View Related

OpenSUSE Install :: Invalid Module Format - FATAL: Error Inserting P4_clockmod

Jan 10, 2010

I have a problem with loading the powersaving kernel module p4-clockmod.ko. When I try inserting the module (via modprobe or insmod) I get FATAL: Error inserting p4_clockmod (/lib/modules/2.6.31.8-mediaserver/extra/p4-clockmod.ko): Invalid module format The module has been compiled together with the kernel. Other modules load with no problem at all. I've tried recompiling the kernel (after re-installing the sources, make xconfig from scratch) - no avail. There's only one kernel source package installed. Searching the forum and google didn't yield a helping answer.

View 9 Replies View Related

OpenSUSE Install :: WARNING: Gsignal.c:2273: Signal 'dialog-hidden' Is Invalid For Instance '0x81299b8'

Jun 18, 2010

Upgraded my 11.2 system to 11.3 today. Can't login anymore using gdm or xdm login window. The password prompt is displayed but no chars are echoed in the password field. when you click Login, it displays "Authentication failure" in the window. The logged messages in the /var/log/messages for the gdm-greeter are:

gdm-simple-greeter: GLib-GObject-WARNING: gsignal.c:2273: signal 'dialog-hidden' is invalid for instance '0x81299b8'
gdm-simple-greeter: Gtk-WARNING: gtkwidget.c:5628: widget not within a GtkWindow
gdm-session-worker: gkr-pam: couldn't get the password from user: Conversation error
gdm-session-worker: pam_unix2(gdm:auth): conversation failed

Note that I can login at init level 3 as root of the user I"m attempting to login with in the gdm window.

View 1 Replies View Related

OpenSUSE Install :: Boot Two OpenSUSE Systems With The Same Settings?

Apr 3, 2010

Is it possible to make two computers have the same users, home directories, and users? As in if I login to one computer and add things to the home directory can you apply it to the other computer and if I add a user on computer 1 the user will be on computer 2.

View 9 Replies View Related

OpenSUSE :: GCC C++ Compiler Installation - Repositories In The Application Sticky Only Applied To Installations Through 11.3

Apr 18, 2011

I am looking to install a c++ compiler. I run 11.4, and was told to look in the Software Manager for easy installation. I have no repositories installed, as the repositories in the Application sticky only applied to Suse installations through 11.3. I found the package "gcc45-c++" (Version Number 4.5.1_20...208-9.8) when I searched the Software Manager. I proceeded to install it, and had no problems, but when I looked in "applications", the compiler was not there. I'm aware that I may be revealing some great ignorance here, so I'll ask, should gcc appear? If not, how do I execute the program?

View 9 Replies View Related

OpenSUSE Install :: GRUB Settings During 11.3 Install Not Honoured?

Nov 26, 2010

I recently installed 11.3 from the network install CD and I wanted to configure GRUB to have a boot password. I went into the necessary options and enabled the password and saved. I went back in to confirm it stuck, and the password option was unchecked and the password was blanked.I re-entered the information and just carried on. The installation summary didn't mention any password being applied to GRUB, but I just kept on going. Sure enough, there is no password on boot with GRUB now.I tried this over multiple installs in the past couple days, as well as with the 11.2 network install CD, and on no install was the password option honoured

View 4 Replies View Related

OpenSUSE Install :: Migrate KDE 11.2 Settings To 11.3?

Jul 16, 2010

I installed 11.3 as a "fresh" install (not upgrade) into a second partition, so now I have both my current 11.2 and the new 11.3 as a dual boot.

I'd like to migrate my old KDE (4.4.3) settings to the new 11.3 (KDE 4.4.4) installation, most importantly KMail and its archived mail folders. My plan was to copy the kmailrc file from the ~/.kde4/share/config/ folder and overwrite the default kmailrc that's on 11.3 and then replace the ENTIRE ~/.kde4/share/apps/kmail/mail/ folder on 11.3 with the one on 11.2 (including the hidden files and folders).

My questions are:

1. would this work, or am I missing other files and folders.

2. Would I be better off just copying the entire ~/.kde4 folder from 11.2 partition to 11.3?

View 3 Replies View Related

OpenSUSE Install :: Getting 11.4 MS4 With All Brand New Settings?

Dec 4, 2010

Not sure if this is correct place to ask this but here go:I have the following setup today:

sda openSUSE 11.2
sdb openSUSE 11.4 ms3
sdc openSUSE 11.3 (production)

sdb is my test environment. sda is still around since its the only way I can power down my system. 11.3 and 11.4 hang on power down. (Another subject) I have the 11.4 ms4 dvd made and I want to install to sdb without carrying over any of the settings. In the past I've just formatted and installed but the settings for the user and root were saved. Want to do a total fresh install. Reason for not carrying over setting is problems with Akonadi not starting (tried all the trouble shooting tips), and Vbox freezing keyboard and mouse when installing XP.

Russ
openSUSE 11.3 (2.6.34.7-0.5-default)|KDE 4.5.3 Release 10|
Intel core2duo 2.5 MHZ,|4GB DDR3|GeForce 8400GS

View 3 Replies View Related

OpenSUSE Hardware :: Nvidia-settings Won't Install From Rpm

Jul 19, 2010

I am extremely disappointed in this 11.3 release. openSUSE had a system that worked. I never had a major problem with the Nvidea video drivers before this release. When I did have a problem with the drivers (usually because Nvidia screwed up) I was able to easily use "The hard way" to install the drivers and all was good. But now the system is so screwed up that the drivers wont install. I can't find a working Saxx2 anywhere. nvidia-settings won't install from rpm. What the hell is going on? This release should have been held up until this garbage was fixed. Novvaeu (sp?) won't work for some of the programs I want to run.

I probably changed so much stuff that I bet my system won't boot now. Oh and what happened to the lack of repair software on the install disk? For two versions now the only repair option we have had is the command line. That's great if you use those tools on a regular or semi regular basis.

View 5 Replies View Related

OpenSUSE Install :: Non-persistent Display Settings In 11.2 / Kde?

Apr 4, 2010

My default display (DF-770 monitor) comes up something like 1280x960. In the "configure desktop" > display I set the display to 1152x864@75Hz. Next I accept the setting after the preview. When I reboot, the display is back to 1280. Do I have to manually edit some file to make my selection permanent?

Sysconfig editor has a variable that starts off with 1024x768, but that doesn't seem to be my problem, so I didn't mess with it. How do I get my display preferences saved?

View 5 Replies View Related

OpenSUSE Install :: OS 11.3: Configure The Monitor Settings?

Jul 17, 2010

The default Gnome desktop now has a 1600x1200 @ 75 Hz which fit my monitor but is a little too big (or at least the font sizes are too small). I would like to switch to a lower resolution. I don't find anywhere in Yast how to configure the monitor settings. No more sax2, no more /etc/X11/xorg.conf? What does replace them?

I mean, where can I set which monitor I"m using (Targa TM4896-1), what are the screen resolutions supported, if I want hardware 3D acceleration (or not), if I want to use dualhead (Matrox G400 DH)?

View 9 Replies View Related

OpenSUSE Install :: Display Settings Won't Stick?

Oct 8, 2010

I have no clue why KDE is doing this, but whenever I reboot the system, the resolution resets to 1024x768. I really need to stop it from doing this. Also, Sax2 doesn't seem to be working and there is no xorg.conf file that I can see of.

View 4 Replies View Related

OpenSUSE Install :: Reset To Live CD Settings

May 20, 2011

I had a machine with 11.3, and tested 11.4 live CD. It looked good, network worked and so did compiz. But then I installed, and I can't see any wireless networks, the screen flickers and compis doesn't work. Is there any way to simple reset all settings so that they become the live-cd settings?

View 4 Replies View Related

OpenSUSE Install :: Combination Of Settings Which May Make It Run Better?

Jun 28, 2011

attempting to reinstall 11.3, my system always freezes up at different points. Always during actual installation (not setup). Burned an 11.4 disc and the same happens. First was a DVD, but the new one is a CD, and now with the new version, a little dialogue comes up at the start to tell me 1 gig of RAM may not be enough. Well, it always was before. Is there a certain combination of settings which may make it run better? Also, a live session works fine.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved