OpenSUSE Hardware :: Try To Get Wintv Pvr Usb2 Running?
Sep 9, 2011i want to try to get my wintv pvr usb2 running will this article still work to get it going? Set up Hauppauge WinTV-PVR USB2 - openSUSE is there a easier way?
View 9 Replies
ADVERTISEMENT
Fedora Hardware :: Hauppage WINTV USB2 Driver 14?
Nov 27, 2010i have a hauppage wintv usb2 tv device, works with windows OS, i want to watch live tv using this.
View 2 Replies View RelatedOpenSUSE Hardware :: Ehci_hcd Fatal Error With USB2.0 Hard Drives
May 30, 2011I'm getting failures of ehci_hcd at random times when trying to copy files between USB2 hard disks on my new installation of OpenSUSE 11.4 on my new i7 machine. Kernel version is 2.6.37-0.5-desktop, x86_64. The error is very repeatable but happens at random times, not associated with any particular disk sector or file etc.It's becoming very annoying as it is causing files on my drives to become corrupted if they are open when the error occurs.
I have two USB2 hard drives plugged in, and I'm trying to copy files from one to the other either via terminal or nautilus. The symptom of the failure is that all USB devices on the root hub of those drives will suddenly disappear in the middle of a file transfer. This includes the KB & mouse , so I lose every USB device on the same root hub at once.
If the keyboard is on a separate root hub I can retain control of the PC. In this case, lsusb shows that the root hub to which the drives were connected has vanished - not just the drive itself. The whole root hub is gone. I have confirmed that it is NOT a problem with the drives themselves, because
(a) I have tried many different drives, of different brands, and they all do it,
(b) all my drives work flawlessly under Windows 7 and
(c) this never happened under my old OpenSUSE 11.2 on my old x86_64 core2 duo PC with the same hard drives.
They are all NTFS formatted and I use NTFS-3g to write to them. I don't have a choice about the NTFS, since they bring data from other Windows PCs. I'd much prefer to be on ext3, but what can you do. The root cause of the problem is that the ehci_hcd module is failing at a low level. It's not the NTFS-3g driver, by the looks of things. I have no idea how to fix this. I don't think it's a problem with my USB2 drives going to sleep mode because it happens in the middle of a file copy operation!
/var/log/messages output follows... /var/log/messages shows these kinds of errors at the leadup to a failure. Nothing suspicious appears until we suddenly see this:
kernel: [ 505.042722] hub 1-1:1.0: cannot reset port 3 (err = -110)
... same message repeated 4 times ...
kernel: [ 509.075401] hub 1-1:1.0: Cannot enable port 3. Maybe the USB cable is bad?
kernel: [ 509.083593] hub 1-1:1.0 cannot disable port 3 (err = -110)
[code].....
NTFS-3g then unmounts ALL the drives on that root hub and everything falls in a heap as all I/O operations and every device on that hub fails in sequence.
OpenSUSE Multimedia :: Get TV Card (WinTV-HVR 4000 HD) Tuned On DVB-S2 Transponders?
Feb 13, 2010After some difficulties I succeeded to run this TV card under SUSE 11.1 with kaffeine 0.8.8.Everything works fine except for that the card refuses to tune on a DVB-S2 transponder. (For Example TP 11 on Astra 19.2E)The terminal output looks like this:
Tuning to: Das Erste HD / autocount: 1
Using DVB device 0:0 "Conexant CX24116/CX24118"
tuning DVB-S to 11362000 h 22000000
[code]....
Ubuntu :: Booting The USB2 And E-SATA?
Mar 20, 2010I've been using a 2GB flash drive with Ubuntu on it for the last few weeks, instead of a full install as my main laptop is down with hardware failure. I'm finding that it works so well, that I'm tempted to go this way permanently. I really like having the same setup on whatever machine I happen to be using. Anyway, If I was to do this I'd need a drive with more space and I've come across portable SSD drives that support connections over both USB & E-Sata.
If I had Ubuntu installed on such a drive would it be able to boot over both kinds of connections or would I be limited to whatever connection I did the install over? My work laptop supports e-sata, so I'd like to use that mainly but I would like to be able to use USB when e-sata isn't available.
Debian Configuration :: Usb 3.0 Stick Only Boots From Usb2 Hub
Sep 2, 2015My usb stick with Debian only loads from the usb hub it's crazy. I just tried putting the usb stick onto a usb3 port in my desktop and also on a usb2 port even the one where the usb hub is connected to and it wont' load!. Same initramfs prompt happens as when connected on the laptop usb ports.
the usb hub has usb2 speeds so is not that the stick is under usb1.1 emulation.
Debian Hardware :: USB Mouse Working With USB3 But Not With USB2
Aug 1, 2014I have Debian Jessie (testing) with a custom kernel 3.15.7 installed on an Acer Aspire V5-123 netbook which has 2 USB2, and 1 USB3 ports. The problem is that my A4 tech usb mouse is only detected when I connect it to the USB3 port!
Here is the dmesg output after I plug the mouse to the USB3 port:
Code: Select all[ 844.152073] usb 1-1: New USB device found, idVendor=09da, idProduct=000a
[ 844.152089] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 844.152098] usb 1-1: Product: USB Mouse
[ 844.152106] usb 1-1: Manufacturer: A4Tech
[Code] ....
and the lsusb output:
Code: Select allBus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 04f2:b3f6 Chicony Electronics Co., Ltd
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 09da:000a A4 Tech Co., Ltd Optical Mouse Opto 510D
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
But, if I plug the mouse to one of my USB2 ports, I get the following output from lsusb regardless of having or not having my mouse connected:
Code: Select allBus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 04f2:b3f6 Chicony Electronics Co., Ltd
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
And finally, the modules loaded:
Code: Select alllsmod | grep usb
usbhid 44476 0
hid 98196 2 hid_a4tech,usbhid
usbcore 162472 5 uvcvideo,ehci_hcd,ehci_pci,usbhid,xhci_hcd
usb_common 12440 1 usbcore
Apparently, people have had similar problems in Ubuntu, Fedora, Arch, ..., but, I did not find a unique fix.
Fedora Hardware :: Digital Video Import Via Usb2?
Feb 25, 2011I have a digital camcorder (panasonic NV-GS33) and would like to get the video's to my Hd for editing etc,etc. From what i can see, linux only supports ieee1394. But, as with most google searches and linux you only ever seem to see the problem stories so thought id ask here to see how i could transfer via the usb2 port or weather its even possible?
View 3 Replies View RelatedFedora :: USB3.0 Drive Slow On USB2 Port?
Apr 8, 2011I bought a Thoshiba StorE art 3 1TB external hard drive yesterday and I had to clear off a lot of data from my vaio to the ext drive. But I am facing an acute problem in the data transfer and write speed. The drive is USB 3.0 and my usb ports are
Code:
lspci|grep -i usb
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
I am running on fedora 13 with
Code:
uname -r
2.6.34.8-68.fc13.x86_64
When I try to transfer a big chunk file, the speed I get is 1.7MB/s. I have tried in my other boot windows and had 56MB/s
The second doubt is, I have formatted the whole disk as a single partition of 930GB(NTFS). Do I have to partition into smaller parts for efficiency ?
Ubuntu Multimedia :: Using Coolgear USB2-HDMI With Kubuntu?
Nov 4, 2010Has anyone tried using a USB to HDMI video card with ubuntu? Is it possible?
I was thinking of purchasing the Coolgear USB2-HDMI.
Ubuntu Multimedia :: WinTV HVR 950 Q Causes Overheating?
Jan 1, 2011I have configured Kaffeine to work with my Hauppauge WinTV HVR 950Q USB device, and am able to get channels scanned, and can get sound, video from channels, etc. However, its use overheats my laptop to the degree it literally shuts down- turns off! Any suggestions? It took some effort to get this to work in Ubuntu 10.10; however, if it heats up the laptop to this degree what good is it?!
View 3 Replies View RelatedDebian Configuration :: 8.2 - Getting External USB2/3 HDDs To Automount / Autounmount
Dec 10, 2015I'm running Debian 8.2 and trying to set up so I can plug in a couple of external hard drives that will be used to sync data between systems using rsync.
I've got the rsync bit working how I want, thats not a issue. But what I can't seem to get to work properly is when I plug the devices in, they don't mount automatically.
I've tried various methods to no avail so far, systemd.automount in fstab doesn't seem to want to work, for some reason it gives a I/O error. I've tried setting up udev rules and they don't work either, so I'm a bit of a loss now.
Not sure what info to provide that would be relevant at this time, but can add logs as required easy enough.
This machine is headless, so command line only suggestions would be best. I can access X via the network if I have to, but I'd rather do it by cli for ease of access.
My fstab file
Code: Select all# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=9b4e9dae-ea53-439a-a7fe-87c371c03803 / xfs defaults 0 1
# /home was on /dev/sda9 during installation
[Code] ....
Fedora Hardware :: System Uses Uhci_hcd Instead Of Ehci_hcd On USB2 Ports
Jan 14, 2011I have 8 x USB2 ports on my computer. I know this from personal experience, Windows write speeds, and the spec sheet for my motherboard. I get USB2 write speeds in windows, however when in F14 I get an average of 1.5mb/s, which is USB1.1 speed. When I run lsusb it shows 2 x USB 2.0 and 6 x USB 1.1. /proc/bus/usb/devices shows 2 ports using ehci_hcd (480speed), and 6 using uhci_hcd (12speed).
modprobe -r ehci_hcd (or uhci_hcd) fails with "FATAL: Module ehci_hcd is builtin"
rmmod ehci_hcd (or uhci_hcd) fails with "ERROR: Module ehci_hcd does not exist in /proc/modules"
1) Why are 6 ports being identified as USB 1.1
2) How to I get them to use ehci_hcd and return to USB2.0 speeds?
General :: Cannot Copy File To USB2 External Hard Disk
Jan 25, 2010I plan to reformat & reinstall my linux (centos).Before doing this, I got to backup my files into my USB external hard disk from Seagate (FreeAgent). The problem I faced is that I could not copy file into the hard disk even I was in root user. It prompted me that it is only read-only. I just wonder why.I have tested with my thumb drive. It worked. May I know why I could not copy file to the USB FreeAgent hard disk. Due to file system?
View 3 Replies View RelatedUbuntu :: Unable To Get The Hauppauge WinTV 900 Hybrid
Jan 11, 2010I can not get my usb dvb-t sick working. It is a hauppauge WinTV-HVR 900 hybrid TV stick.
The number on the backside is: M/R: 65018/BC20 Some time ago I read somewhere that this model was supposed to work with ubuntu 9.10. [URL] it is possible to make it work since the poster appears to be using the same model as I do.But I still have trouble setting it up.
Fedora Hardware :: Unable To Use 14 And Hauppauge WinTV-HVR2200
Apr 12, 2011I just put Hauppauge WinTV-HVR2200 device to my system, however I can't get it working
Code:
$ lspci -s 03:00 -vvv
03:00.0 Multimedia controller: Philips Semiconductors Device 7164 (rev 81)
Subsystem: Hauppauge computer works Inc. Device 8900
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
[code]...
Ubuntu Multimedia :: Hauppage Wintv-HVR-3000 And Kaffeine
Feb 13, 2010I have Ubuntu Karmic 9.10 with this card, its just works without any configuration but I have a big problem.
I start Kaffeine 1.0-svn3 and I can see the last dvb-T channel but when I want to change to other channel I can't see it, I have to restart Kaffeine, or wait to get the "Read error from:" error press Ok and select the channel.
Ubuntu Multimedia :: Hauppauge WinTV-HVR 1110 Won't Work
Jun 27, 2010I bought this tv card because it was listed as working 'out-of-the-box'. Well, it didn't for me. I've googled and forummed for 3 days, tried all the fixes and nothing works.
View 1 Replies View RelatedHardware :: Hauppauge WinTV PVR-150 Card Recognized As Scanner?
Jul 20, 2009Upgraded system so I could store more recorded video. Now system identifies the Hauppauge WinTV PVR-150 card as a scanner. I have the original setup disk from Hauppauge but it is not Linux compatable. Running: Ubuntu 9.04 on: AMD Athlon64 X2 Dual Core Processor 5200+
View 11 Replies View RelatedHardware :: WinTV-HVR-950Q- Ubuntu ... Install Tv Tuner?
Feb 11, 2010I bought this tv tuner. I cannot get it to work however. here is my dmesg log [URL] I have read this post at TV linux and it says that it should work out the box with karmic, my kernel is 2.6.31-17-generic I scanned channels using this command tvtime-scanner and it found some channels here is the output it shows channels picking up
Code:
xbmc@xbmc-desktop:~$ tvtime-scanner
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /home/xbmc/.tvtime/tvtime.xml
Scanning using TV standard NTSC.
Scanning from 44.00 MHz to 958.00 MHz.
Found a channel at 176.50 MHz (176.25 - 176.50 MHz), adding to channel list.
Found a channel at 184.00 MHz (183.75 - 184.00 MHz), adding to channel list.
[Code]...
how do I configure tv time to work? it just comes up with a no signal [URL] after I get this working I want to get the tvheadend working from this XBMC thread I dont know what to do as I am new to this and thought this would work out the box.
Ubuntu Multimedia :: Install WinTv Pvr-250 (Tv-card) On 9.10 Karmic Koala?
Feb 7, 2010How do I install WinTv pvr-250 (Tv-card) on my ubuntu 9.10 Karmic Koala? I am new to linux and not quite sure to begin. I would like to be able to use it to watch TV on my computer, using VLC, mythTV or similar.
View 3 Replies View RelatedUbuntu Multimedia :: WinTV Card Fails To Initialize Tuner
Sep 11, 2010I'm running 10.04 64-bit with all stable and pre-release upgrades enabled in a Dell 4-core Inspiron with 8 GB of memory. I just bought a Hauppage WinTV-HVR 1600 and it's detected in the boot process and all firmware is loaded, but then it goes bonkers and spews
[ 24.421795] cx18 0000:02:01.0: firmware: requesting v4l-cx23418-dig.fw
[ 24.612289] cx18-0 843: loaded v4l-cx23418-dig.fw firmware (16382 bytes)
[ 24.632510] cx18-0 843: verified load of v4l-cx23418-dig.fw firmware (16382 bytes)
[code]....
over and over again. All the info on the Hauppage site and LinuxTV is very obsolete. MythTV initializes, but can't find any channels on either the analog or digital streams.
Ubuntu :: Hauppauge WinTV IR Modules Broken In Natty - Previously Working In 10.10
Aug 7, 2011I am having problems with Natty AMD64 (Ubuntu 11.04) and LIRC/IR-Keytables.
I have a Hauppauge WinTV card (Bt87 (TV card and IR receiver/transmitter) that worked (for the first time) automatically with 10.10 and LIRC. I recently moved over to 11.04, copied my LIRC config files over (hardware.conf, lircd.conf, lircmd.conf, etc), and received the error couldn't find any node at /sys/class/rc/rc*
The modules I had previously been successful with were: lirc_dev & lirc_i2c, as is apropriate for my speific card.
I then learned that Natty incorporated a lot of RC elements in to the kernel, and tried following:[url]
Which suggested removing lirc. At this point, ir-keytable also gives the same error about no node at /sys/class/rc/rc*
I think that I am having a problem with the correct driver being loaded for my card. When I look at a dmesg, the relevant section is: (note: I'm not sure if this dmesg was from before or after I uninstalled LIRC and just tried keytables)
Code:
The 3rd last line makes it seem that the IR capabilities have been recognized further confusing me as to why no /sys/class/rc/rc* has been registered. I've attached an unedited copy of my proc/bus/pci/devices, and below is my lsmod.
Code:
Hardware :: Video Card Error Hauppauge WinTV-HVR 1850 Kernel 2.6.27-17-generic
Sep 4, 2010I am trying to install a Hauppauge 1850 video card into Linux Home automation system (LinuxMCE) which is based on Ubuntu Intrepid (I can't upgrade the kernel since this is what the LinuxMCE distribution supports)I am feeding analog signal to the video card, either through a coax analog connection or an RCA analog connection. I cannot see any picture from the card (I verified that the video card is working properly under a Windows Vista OS)I am trying to use the video card using a lightweight application such as tvtime, xawtv. In all applications I am failing to see an image. (For example, tvtime shows the message "No inputs avialble Cannot open capture device /dev/video0". Right clicking on Input configuration / Change video source doesn't give any options)
View 9 Replies View RelatedUbuntu Installation :: Added A "Haupauge WinTV-HVR-1600"?
Mar 26, 2010get my GUI Desktop back. I had an amd athlon x2 PC w/ onboard graphics GeForce 6150se and a dual boot between xp and ubuntu 9.10
I added a Haupauge winTV-HVR-1600 to sort of watch tv (even though i totally never watch tv) but when i wanted to go back to ubuntu it boots into command prompt and asks for my username and pass. I think the problem is with X i am not sure though, but since i changed something inside i think X needs to be reconfiged or somethin can some
OpenSUSE Hardware :: Get Frontpanel Audio Connectors Running With Actual OpenSuse
Jan 11, 2011I have 2 pc with Asus AMD boards (M4A87TD Evo and M4A88TD-M Evo) running OpenSuse 11.3.on both the front panel audio headset + mic do not work.on one PC I have an other OS also installed, so I know that on this machine the hardware is working.is there a chance to get the frontpanel audio connectors running with the actual openSuse or do I have to wait for the next version with a newer kernel/alsa version?
View 6 Replies View RelatedOpenSUSE :: Burn CDs If Running Opensuse From A Usb Stick?
Sep 17, 2010I'm going to boot up a desktop (that has a cd burner) from a USB stick of openSUSE 11.3. Will I be able to burn an iso (that's on the desktop's harddrive) to CD, i.e. can I use the cd burner, if I've booted from a USB stick?
View 8 Replies View RelatedOpenSUSE :: Is Anybody Running AT&T Vpn Client On OpenSUSE 11.2?
Apr 6, 2010Is anybody running AT&T vpn client on openSUSE 11.2?I wanna install openSUSE 11.2 on my work computer and I saw that are some problems with AT&T client.
View 2 Replies View RelatedOpenSUSE :: Kvm - Add New Mashine - Message "virtual Monitor Is Not Running And To Run Xen I Need Restart My Opensuse"
May 23, 2011have installed kvm using yast and now when I try add new mashine I am getting message "virtual monitor is not running and to run xen I need restart my opensuse, which I did and still getting the same message... thats what I am getting when going to manager virtual mashines -> add new mashine : Traceback (most recent call last):
[Code]...
OpenSUSE :: Get Electricsheep Up Running On 11.2?
Feb 12, 2010Is it possible to get electricsheep up and running on opensuse 11.2?
View 2 Replies View Related
