OpenSUSE Hardware :: Can't Get Lavrec To Work
Jan 3, 2010
I'm not sure if the following is an openSUSE specific issue,a motherboard issue, a 64 bit issue, or if it's something else entirely.I have a Hauppauge WinTV (BT878) card that I would like to use. I have used this cad before in an older computer, with linux, and it worked fine then, so I'm assuming it still works fine now.
The main issue that I have is that I can't change the resolution to (motv, transcode, etc) to anything over 352x240. If I do, I get errors about not being able to dequeue frames and such and I get no picture and/or the program hangs/crashes. Also, I can't get lavrec to work no matter what resolution I set. It crashes with queuing errors as well.In case it matters, my motherboard is an Asus M4A78T-E, I have openSUSE 11.2 64 bit.
View 1 Replies
ADVERTISEMENT
Dec 17, 2010
When I try to capture a video with my Conexant BT848 capture card, I get this error:
** ERROR: [lavrec] Error queuing buffers: Device or resource busy
The command I used is lavrec - software-encoding - format = a - input = P - quality = 100 - geometry = 912x576 file.avi
View 1 Replies
View Related
Feb 5, 2011
How do I get mixer and dsp to appear in /dev? I can't use Lavrec without disabling audio.
View 1 Replies
View Related
Oct 4, 2010
Can anyone suggest a good free Virtualization Software Package that work on OpenSuse with the KDE Desktop, as I need to use Windows for some applications that have not got a Linux equivelant, Namely Reserch In Motions BlackBerry Desktop Manager and the drivers for my Printer and Scanner, so I would also need something with USB pass through. Or if there isn't any free virtualization software that will dowat I want that's free then something that is not expensive that's paid for. I like the look of Parallels Desktop 4 for Windows & Linux but I'm not sure if I would be able to justify paying �54.99 for the ammount of use that it will get?
View 9 Replies
View Related
Jun 10, 2010
I successfully installed OpenSUSE on a 4gb pen drive using the instructions contained within this portal. However, for the life of me I can't figure out why the persistent feature doesn't work.
Here's my partition table map:
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[Code]...
View 1 Replies
View Related
Jul 8, 2009
I just purchased a Verizon USB 760 Modem.I purchased the Modem from Verizon because their web site stated that it supported all major OS including Linux.
My system specs are: HP Compaq 6715b Laptop
OS Information
OS: Linux 2.6.25.20-0.4-default i686
Current user: jraglin@Jada
System: openSUSE 11.0 (i586)
[Code]...
View 9 Replies
View Related
Feb 17, 2010
I installed opensuse 11.2 64-bit edition. I installed all of the software I wanted.I now want to clone the installation to 6 other workstations that are 100% identical to the first.I used clonezilla to create the image, but all of the new workstations will not boot. This is due to the fact of the fstab being 100% cloned and other boot volume problems.Does anyone know of a good, easy way to clone opensuse 11.2 that will work?
View 9 Replies
View Related
May 6, 2010
I upgraded to OpenSuse 11.2 and just about the only thing that doesn't work is my wireless internet. From my research, I should be using the iwl4965 or iwlwifi driver; however my system seems to be running iwlagn. I have no idea how to switch it as neither of the correct drivers can be found in my yast, and I've failed to find any information about this on the Intel® Wireless WiFi Link drivers for Linux* website.
View 9 Replies
View Related
Jan 12, 2010
I have three machines with the same configuration. ssh and SFTP enabled on all three and I can see all three from the network. I can also ping all three. Here is what I get with the ssh debug command on the problematic machine:
linux-csp7:/home/ines # ssh -vvv ines@192.168.2.19
OpenSSH_5.2p1, OpenSSL 0.9.8k 25 Mar 2009
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug2: ssh_connect: needpriv 0
[Code].....
View 4 Replies
View Related
Feb 25, 2010
I am trying to get my mic working for voice chat on DDo, but I have had no luck so far. I have a headset with a microphone on it, but I don't seem to be able to get it to record. the audio out put works though.
View 9 Replies
View Related
Mar 7, 2010
When I type
Code:
or
Code:
On shell, kernel does not recognize it. What can I do for that?
View 3 Replies
View Related
Aug 13, 2010
I have vnc running, but I can't change the startup script to use a different desktop manager. I can't tell if it has anything to do with it being TightVNC or not. I can't find information regarding VNC (which I want) and guides are cryptic/don't work 100%.
I'd like to set the default to KDE and log in via internet which I can do via url. Unfortunately, I'm not exprienced with remoting in as well VNC is enabled and config script is listed below.
Visited: VNC HOWTO - openSUSE
- Remote Access to the openSUSE Linux Desktop - Techotopia
Version: 11.3
Default X: KDE (Installed Fluxbox, lxde, xfce)
[Code]....
View 3 Replies
View Related
Sep 4, 2010
I just did a fresh install of OPENSUSE 11.3. And I can't connect to the machine via ssh.
I get the folowing error in /var/log/messages: Sep 4 08:04:11 OSUSE sshd[10589]: Accepted keyboard-interactive/pam for primzy from 192.168.4.222 port 1042 ssh2 Sep 4 08:04:11 OSUSE sshd[10589]: syslogin_perform_logout: logout() returned an error
how to solve this but nothing seams to work. One of the links was this one: link . From this link I found out that I'm missins /etc/ttys file, But creating it did'n make any difference.
Here are some information on my system:
OSUSE:/etc # zypper lr -d
# | Alias | Name |
[Code]....
View 9 Replies
View Related
Oct 13, 2010
I have the cnf utility not working. What should I do to restore functionality?
View 9 Replies
View Related
Feb 10, 2010
I have used Gscan2pdf for a long time on opensuse11.2 and it worked very well as a scan tool.I have now reinstalled suse 11.2 (I managed to break it last week) but cannot get gscan2pdf to work and do not know how I did it last time.It requires certain dependancies to be manualy installed and that has been ok, but I cannot find one of the dependancies called.Does anybody know where I can get it from?
View 1 Replies
View Related
Feb 16, 2010
I have just installed compiz through the YaST2 software manager.It all downloaded and installed OK as I can see it in the Kickoff Application Launcher.But although I have set the configuration for cube rotate, when I point and click to different desktops on the task bar, the switch is without rotation
View 5 Replies
View Related
Feb 21, 2010
Picasa Web Albums - Sri - Linux
when i hit alt+F2 the run dialogue opens up but i am unable to type anything there.you can see the screenshots of those in that link.any packages to reinstall??
i am using kde 4.3.1 (KDE 4.3.1) "release 6" on opensuse11.2 64 bit.i have used this before with no problem.i recently formated my system and i am getting this since then
View 4 Replies
View Related
Aug 25, 2010
using suse 11.3 and kde 4.5 I installed kvm, I tried to install widows xp, everything works well until when the windows cd restart, there kvm shows en error like no disk to boot and don't reboot to continue the installation.
View 1 Replies
View Related
Nov 21, 2010
It seems that I cannot get Exaile to work...
View 2 Replies
View Related
Apr 3, 2011
Compiz does not work completely in 11.4 even ccsm does not start with the following output:
anixx@anixx-desktop:~> ccsm
/usr/lib64/python2.7/site-packages/gtk-2.0/gtk/__init__.py:40: RuntimeWarning: tp_compare didn't return -1 or -2 for exception
[code]...
View 9 Replies
View Related
May 12, 2011
when trying to launch Avogadro 1.0.1_x.x on opensuse 11.4, I get:
Code:
The _C_API object in the sip python module is invalid.
Could not initialize SIP API !terminate called after throwing an instance of 'boost::python::error_already_set' And the program does not launch!
It is apparently not restricted to opensuse 11.4 but also to other recent Linux systems. On Avagodro's site, this problem is claimed to be solved in 1.0.2 (and 1.0.3 is now out), but I could not find anything else than 1.0.1_x.x versions for opensuse 11.4. Could someone be kind enough to make a new 1.0.3 package so that Avogadro works on opensuse 11.4?
View 8 Replies
View Related
Sep 11, 2010
How do i get TV out to work with my ati 9250 chipset video card??? It flickers and is incomplete resolution after default 11.3 install
View 1 Replies
View Related
Dec 9, 2009
Host is x64 openSUSE 11.2
guest is winxp pro
VirtualBox ver 3.0.12
The install and setup of VirtualBox is good and working.
I'm having a perplexing issue with usb devices. I have three usb devices connected to my system - apc battery, sd carder, and a Logitech joystick. All devices work on the host. I can connect the apc and the card reader to the guest and they work perfectly. But not the Logitech joystick. I get this error, same as I've seen in some other threads:
Failed to attach the USB device Logitech Force 3D Pro [0600] to the virtual machine winxp1. Failed to create a proxy device for the USB device. (Error: VERR_READ_ERROR)
under "details" is this:
Result Code: NS_ERROR_FAILURE (0x80004005)
Component: Console
Interface: IConsole {0a51994b-cbc6-4686-94eb-d4e4023280e2}
When I installed I modified my fstb:
Code:
/dev/disk/by-id/ata-SAMSUNG_SP2004C_S07GJ1UA115587-part1 / ext4 noatime,acl,user_xattr 1 1
/dev/disk/by-id/ata-SAMSUNG_SP2004C_S07GJ1UA115587-part2 /home
[Code]....
View 1 Replies
View Related
Jan 26, 2010
I need a Etext reader to help me read my txt books. I can not use the RFBD or get the Virtual box to work! Both tread told me to Not Try! so what is a etext reader for the txtbooks.
View 2 Replies
View Related
Apr 6, 2010
Im having some trouble getting sensors to work on kernel 2.6.33.
This is what i have at sysconfig under lm_sensors:
Code:
When i do /etc/init.d/lm_sensors restart i get this:
Code:
I know k10temp driver is now included on kernel 2.6.33 so i dont know what to do.
View 1 Replies
View Related
Apr 17, 2010
KDE world clock does not work I mean when I put it as widget it apper very small I can not see any thing on it and I can not open it to the desktop by double click as I use to do in KDE 3
View 1 Replies
View Related
Jul 6, 2010
I'm working with Opensuse 11.2 and KDE 4.3.5. I tried to restrict the run command (with Alt-F2) in the kdeglobals file:
~/.kde4/share/config/kdeglobals
[KDE Action Restrictions]
run_command=false
But there is no effect. With Opensuse 10.3 and KDE 3.5 it works fine.
View 3 Replies
View Related
Jul 21, 2010
The reason why I'm asking help here is because I'm being continuously ignored in #opensuse-irc-channel in freenode. I updated from 11.2 to 11.3 couple of days ago. I have always used gnome and loved it. Update from 11.1 to 11.2 didn't bring any problems and neither did from 11.2 to 11.3. Update went fine, no errors whatsoever occurred. Of course I had some problems with nvidia drivers and it was hard to get dual screen to work, but I managed. After that I figured out that nautilus is missing, because my desktop was empty and no right clicks worked. So I tried to run it from command line to see what it prints out:
Code:
[03:39:33] peikko ~ $ nautilus
nautilus: symbol lookup error: nautilus: undefined symbol: nautilus_file_info_getter In irc they said me before that I have mixed packages or something. I don't know what's the case but my nautilus just won't work. I ran "zypper dup" and synced the packages, and after reboot I figured maybe nautilus from 11.2 would work, so I one-click-installed it from software.opensuse.org/search without adding the repo of course. And for some reason it worked, maybe because I had zypper dupped before.
Being happily using my computers couple of days I noticed video thumbnails don't work any longer, so I killed nautilus. And duh, it didn't start again. I reinstalled nautilus from 11.2, and it looked like this:[URL] I decided to update it back, and live without nautilus until I find the solution. This is also my server, so reinstalling the system is not an option because I have all those confs and I don't have hard drive for backuping. I also tried again zypper dup from official repo with no joy. I also tried zypper dup & reboot from couple of other repos, like gnome latest for opensuse 11.3, but nothing changed.
View 1 Replies
View Related
Aug 6, 2010
I am using Suse 11.1 on a 64-bit computer. Some time ago, I was helped on these forums to get a Brother MFC-640CW printer/scanner to work by downloading the relevant drivers from the Brother website. Although the printer works fine, when I attempt to scan something into the computer nothing happens. A pop up box appears on screen when the printer is used with an XP OS. Can anybody suggest a way to get the scanner working?
View 3 Replies
View Related
Aug 28, 2010
I installed the package "java3d" with yast, and I already have Java_1.6 installed, with the plugin(2 files from YAST). I went online to do a java3d test, and every test site says it is not installed, when it is. Now, where exactly was this supposed to be installed so I can use it under Firefox? Obviously it was installed in the wrong place and Firefox does not see it.
Current java3d installation directory>>>>/usr/share/java
View 6 Replies
View Related
