OpenSUSE Hardware :: Font In Yast Is Hard To Read
Feb 24, 2010OS11.2 Kde4.3, It is quit small and the font style contributes to its difficulty to read. How can I change it? The font in everything else is good.
View 4 Replies
ADVERTISEMENT
OpenSUSE :: YAST's Too Small Font Size?
Jul 3, 2011I am running openSUSE 11.4 KDE 64bit. I found the default font in YAST, for example, in Bootloader and Software Management, is about 8-9 points which is too small to read. Why on earth does openSUSE set a tiny font size as default?
I did try Configure Desktop >Application Appearance, etc. as well as qtconfig in the terminal but these seem not to increase the font size to 12-14 points.
OpenSUSE :: YAST TEXT SIZE - So Small Hardly To Read
Jan 25, 2010I installed Suse 11.2 on my computer... i have 42" screen threw my HDMI output at 1360x768. now.. when i booted it up the first time.. .the text on everything was so small i could hardly read it... so i went and adjusted it threw my System settings by clicking on "Configure Desktop" changed everything to "Sans Serif 15"... BUT.... everything in YAST all the text is NOT readable... ANY ONE KNOW how to fix that..everything BUT yast is just fine...
View 3 Replies View RelatedUbuntu :: Got A Dark Font Color And Hard To Read On The Dark Background?
Aug 26, 2010I'm using the shiki colors theme from the repos right now. "Shiki-Noble" to be specific. When typing something into Firefox's URL bar the internet addresses have got a dark font color and are hard to read on the dark background. Here's a screenshot: FF.jpg
I've had similar issues with other themes and Firefox's URL bar before.
OpenSUSE :: Firefox Font - Gaps In Alphabets Are Making Them Difficult To Read
Jul 9, 2010I am facing some problems in font rendering issue for Urdu (South Asian language). Actually the alphabets are being displayed as, for example, "a p p l e" instead of "apple" - if you see this website, probably you will see the gaps in alphabets are making them difficult to read.
I have installed at least 10 different Urdu fonts but still no help, then I tried adding:
MOZ_DISABLE_PANGO="0" to /etc/environment but it also did not helped.
I am using OpenSuse 11.2, Firefox 3.5.10
OpenSUSE Hardware :: Cannot Read My USB Hard Drive
May 7, 2011I can not see my usb hard drive here is some information
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00021330 .....
OpenSUSE :: Can't Change Font - Font Size FIrefox 3.6.8
Aug 16, 2010I can't change fonts in Firefox preferences (Content).
My OS is openSUSE 11.3, KDE 4.4.4. release 8.
Any type and size of font I use, nothing happens. It's still same font which I choose for the first time I've started Firefox afer installing openSUSE 11.3.
Ubuntu :: External Hard Disk /Hard Drive Mounts As Read Only (Suddenly)?
Jan 17, 2011I recently bought 320 GB Trancend external hard disk and working fine days back.Earlier i could copy from and to the hard disk with out any issue. I dont know what happened after that now i am not able to write any files in to the external hard disk. This is not NTFS formatted device. here is some of the out put from terminal.
Code:
sundar@sundar-sundar:~$ fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
[code]...
OpenSUSE Network :: Device YaST - Can't Identify YaST - "Unknown Network Device"
Dec 8, 2010In my YaST Network Settings (11.3), I see an entry labelled "Unknown Network Device" how to remove the confusion? The Overview tab also correctly lists my three known network devices (listed below), as does the Hardware Information utility. This is the output of lspci, and as far as I can tell, is accurate and complete. So what has YaST seen that it can't identify?
Code:
00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 11)
00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 11)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI [Code].....
Ubuntu :: Hard Drive Set As Read Only?
Jan 19, 2010I set up a server using ubuntu 9.10, with two hard drives in a hardware Raid 1 setup and with two more drives for recurring backups. The problem is that the two drives for backup are set to read only and won't allow me to change the permissions even when logged in as root. I have tried putting "rw" into the "fstab" file with no luck, I have also tried running "gksudo nautilus" and "fsck -r /dev/sdc" but still have the same message that I don't have the necessary permissions to complete the task.
**I just tried erasing the data on the disk and creating a new partition, the disk utility allowed me to erase the data and create FAT32 partitions with the same permission problems but would not allow an EXT partition or NTFS partition (it would give and error message stating:"Error creating file system: helper exited with exit code 1: helper failed with:mke2fs 1.41.9 (22-Aug-2009)")**
***I fixed the problem by fixing a formating problem in fstab and reformatting the drives to ext4.(the fstab had a problem with the way that I broke up the lines when I input the info for the new drives, and I didn't realize it until I maximized the window in gedit.)***
Ubuntu :: Hard Disk Becoming Read Only - Why
Feb 26, 2010I have just freshly installed Karmic on hardware that was previously running Intrepid without any problems. I have not installed anything beyond a few bog-standard applications. I am now running into regular system lock-ups because the / partition is becoming read-only. Once this happens I am unable to start any application or to shut down, because there is no write access. If I happen to have a terminal open, then it is apparent that the disk has become read-only because I can not remove, create or modify any file. If I do not have a terminal open, then I can not open one. Obviously there is nothing written to any log.
View 2 Replies View RelatedDebian :: USB Hard Drive Mounts As Read Only
Jan 4, 2016Trying to go through some old hard drives I'd saved from a Mac we tossed years ago. Using a Sabrent USB adapter (USB-DSC9) I connected it to the Debian box and it mounts as /media. Here's the weird thing: although I can read all the random stuff, the directory with all my actual documents shows up as "you do not have the permissions necessary to view the contents". When I try to fix this with chmod, it tells me that the drive is read-only. Grr.
How do I mount the drive so that it's not read-only?
Ubuntu :: Can't Read WD Hard Drive / Make It Possible?
Dec 26, 2010I have a simple WD external USB hard drive, but when I plug it into my computer nothing happens. Not only is there nothing popping up, but I cannot access it through the file browser. The light on the hard drive turns on as usual.
View 3 Replies View RelatedGeneral :: External USB Hard Drive Became Read Only
Aug 21, 2010I was in the process of backing up data from my hard drive to an external usb drive when the drive suddenly became read only. Does anyone know how I can make it read/write again? I am using Debian Lenny and the drive is ntfs formatted. I have another ntfs formatted usb drive that is not effected in this way.
View 7 Replies View RelatedOpenSUSE :: Red Text In Yast?
Jul 8, 2010What does the red text in Yast mean? I installed a printer driver (Gutenprint 5.2.4) from here: software.opensuse.org: Download openSUSE 11.2) and when I view the installed packages in Yast, it shows up in red text. Why? (btw, that newer Gutenprint has the driver for my new Epson Artisan printer as well as my Samsung laser printer).
View 2 Replies View RelatedOpenSUSE :: Yast FTP Not Working In 11.3?
Jul 16, 2010I report this issue since RC1 but the problem left unsolved .
I unable to start vsftp from yast .
OpenSUSE :: Get OpenMosix With Yast?
Jan 24, 2011i want to install openmosix.
someone told me is easier to do it with yast.
exactly, where do i have to go in Yast in order to install openmosix?
OpenSUSE Install :: Can't Use YaST
May 22, 2011I have been using YaST to install software. It has been working probably. But yesterday when I want to use it again. I can goto that SUI (blue screen) but I just can't go into the software management. and then I try the other options. None of them can't be used.
View 9 Replies View RelatedUbuntu :: Hard Drive Read Only After Backup Crashed
Mar 13, 2010I was busy making backups to my external hard drive just now, but Ubuntu crashed 10 mins into the backups. After rebooting the affected folders are now Read only, and I cannot add or remove anything. This is extremely annoying, I already threw away two USB flash disks because the same thing happened to me in the past. I don't want to throw away the external because it's far more expensive and packed with backups.
Symptoms: I can write or delete a file to the hard drive, in any folder, accept the folders that was being accessed when the computer crashed. I have tried to change permissions, but I get an error. I tried opening a terminal and sudo rm -r that folder, but I get a input/output error. I'm running Karmic. Backups were made by Back-in-time.
Ubuntu :: Cannot Format FC Hard Drive - Unable To Read
Sep 8, 2010Below is results from attempt at formatting my hard drive. As you can see a driver is installed, but not working. Perhaps something is missing? Seems a bit odd that a "unable to read" comes back when disk data is reported. The drive just went through a low level format. BTW this is a fiber channel drive. Also on board are 5 scsi drives. Adaptec raid card. Not sure if that would have any relevance, but there you are.
barry@vm1:~$ sudo lshw -C disk
*-disk
description: SCSI Disk
product: ST173404 CLAR72
vendor: SEAGATE
physical id: 0.0.0
bus info: scsi@1:0.0.0
logical name: /dev/sdb
version: 3A98
serial: 3CE0SRYL00007142FHAW
capacity: 67GiB (72GB)
capabilities: 10000rpm
configuration: ansiversion=3
barry@vm1:~$ sudo fdisk /dev/sdb
Unable to read /dev/sdb .....
Ubuntu :: External USB Hard Drive Keeps Getting Read-only Permission
Feb 17, 2011I have a computer with Ubuntu 10.04, with few disk space. For downloading some torrents, I've connected a USB hardrive, ext4 formated. But this idea wasn't a solution, because the drive keeps getting read-only permission... Is there any way of prevent this to happen?
View 2 Replies View RelatedGeneral :: External Hard Drive Mounted As Read-only
Mar 16, 2011I administer a remote server via SSH that runs CentOS 5.5. I have been unsuccessful in all my attempts to write to two different external USB hard drives with a single ext3 partition when logged in as root.
When attempting to create a "test" directory I get one of two messages:
Quote:
Both drives *appear* to have filesystem issues. When I run an fsck on either drive, I get:
Quote:
Keep in mind this is a newly-formatted, empty drive.
Not putting stock in the odds that I've had two hard drives (different sizes and brands) with the exact same hardware problem, I'm going to assume this is a software issue, although maybe it isn't. Hence, my post in "Linux - General". I've heard talk elsewhere of controller (chipset) issues coming into play. Is this valid?
Okay, here's the information you'll need to make a diagnosis....
Here's the output of a "df -h" command:
Quote:
Here's the contents of my /etc/fstab:
Quote:
Here's the output of "cat /etc/mtab":
Quote:
Here's the output of a mount command:
Quote:
Here's the output of fdisk on the device in question:
Quote:
The number of cylinders for this disk is set to 48641.
There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK)
Command (m for help):
I've got someone with access to the box if necessary. But it might take days to implement solutions since this isn't his full-time job. Remote solutions are, therefore, preferable.
OpenSUSE :: How To Choose Theme For Yast
Oct 30, 2009Using OpenSuse 11.2 RC2. After playing around to install the nvidia driver, Yast lost its beautiful initial colours (light blue, as the rest of the kde desktop) and became a bit uglier (dark blue, more rudimentary, etc; I think the default "unbranded KDE"'s colour).I have the KDE theme set either for the regular user and for root. I have also installed the packages yast2-theme-openSUSE and yast2-theme-openSUSE-Oxygen installed but, how shall I choose one of them?Some webs say that there is an option in Yast under "miscellaneous" to choose Yast's theme, but I do not have it.
View 5 Replies View RelatedOpenSUSE :: YAST Not Showing Updates
Jan 21, 2010I've installed OpenSUSE 11.2 and I'm pretty happy with over all system, the only issue that I had is with Yast, so far. It gives me alert for security patches but no alert for Software update. When I did "zypper up" as superuser I saw that there are updates available for more that 14 applications but yast didn't show me.
if there is any setting for it or should I file it as a bug.
OpenSUSE :: Gnome Install Using YaST Over KDE
Feb 24, 2010From a fresh install of OpenSuse 11.2 64 bit the default is KDE. But if you want to install both KDE and Gnome on the same machine. I got to Yast --> Patterns --> And tick Gnome Desktop Environment and Gnome Base System.
That inturn pops up with a dependency issue. That states the following:
#### YaST2 conflicts list - generated 2010-02-24 13:18:37 ####
pattern:gnome-11.2-20.22.1.x86_64 requires patterns-openSUSE-gnome, but this requirement cannot be provided
uninstallable providers: patterns-openSUSE-gnome-11.3-1.1.1.i586[http-download.opensuse.org-ae9db630]
patterns-openSUSE-gnome-11.3-1.1.1.x86_64[http-download.opensuse.org-ae9db630]
patterns-openSUSE-gnome-11.2-20.22.1.x86_64[openSUSE 11.2-0]
patterns-openSUSE-gnome-11.2-20.22.1.i586[repo-oss]
patterns-openSUSE-gnome-11.2-20.22.1.x86_64[repo-oss]
[ ] do not install pattern:gnome-11.2-20.22.1.x86_64
[ ] break gnome by ignoring some of its dependencies
[x] deinstallation of patterns-openSUSE-kde4_pure-11.3-1.1.1.x86_64
#### YaST2 conflicts list END ###
So my question is what exactly does removing and applying the Gnome pattern do. Because it seems to change alot more than just branding. It changes the default environment to GTK. How would go about reverting the pattern back to KDE after the install of all the correct Gnome Dependencies.
OpenSUSE :: Yast Can't Connect To The Internet?
Mar 3, 2010When I start Yast it hangs at "downloading opensuse(...)repdata.xml". the only way to bring up the main window is to skip autorefresh
It seems like it cannot connect to any reporitories at all. When you try to install software from within Yast it is, once again, unable to download anything.
OpenSUSE :: Can't Update Via YAST Or Zypper
Jun 10, 2010Turned on my PC as soon as I got home & found that Factory repo had a whole bunch of updates, so I selected to 'switch system packages' & clicked accept.
Whatever I tried to download & install displays an error message
Have even deleted the factory repo & re-added, to ensure it wasn't a change of url causing problems.
I'm running 11.2 64bit KDE 4.4.3
OpenSUSE :: Yast-gtk Sw Manager - Reinstall An Rpm?
Jul 13, 2010Yast-gtk sw manager - is there a way to reinstall an rpm? There is in the qt version but can't see how in gtk.
View 9 Replies View RelatedOpenSUSE :: Unable To Yast Logs On 11.3
Aug 27, 2010on opensuse 11.1, i was able to see my system logs using yast. but on opensuse 11.3 i'm not able to find it
View 9 Replies View RelatedOpenSUSE :: YaST Keeps Downloading Repodata
Nov 18, 2010How do I stop YaST from downloading the repodata every time I open the software manager?Even if I have opened it 5 minutes before, YaST still downloads the repomd.xml again.This is also a real pain if I am offline and trying to install an rpm, because I have to wait for it to realise that it can't access the data before it allows me to skip the auto-refresh.By the time that happens I could have installed the software already if I was using a debian or windows based system.
View 4 Replies View Related