OpenSUSE Hardware :: Canon MP210 Via Jetdirect 175x?
May 20, 2010
I got hold of an HP Jetditect 175x and thought I'd try to use it to get network printing other than via a dedicated server box. Managed to get into it and reconfigured it to have an address on the network. Downloaded and RPM'd the canon drivers and have tried to get the printer configured via YaST using both the TCP/Jetdirect route and the LPD route but no joy. Port 9100 is configured on the JD and it comes up in YaST as well. LPD is also opened on the JD - as is Appletalk but that's for the kids . The JD reports that it has a "MP210 Series" printer attached. Is this just a case of the JD wont allow a non-HP printer to run?
View 9 Replies
ADVERTISEMENT
Oct 26, 2010
I have been trying to use the above printer as a network printer by connecting it to the HP Jetdirect 175x gizmo. However, nothing I do works. I have been round and round the configuration roundabout both on the JD and the CUPS Server without joy. I recently had the chance to put an HP printer on the JD and there was no problem configuring CUPS to use the networked printer. The issue seems to be that the JD and the Canon are not talking.
Whereas I could print the JD's config page to the HP (there's a wee button on the JD that does this), I could not get it to print when the Canon was connected. The JD has 4 or 5 options as to which language it will use to "talk" to the Canon for this purpose but none of them works. The JD knows that the Canon is connected because, via its web interface, it shows me the make and model etc. The config page via the web interface shows that it is communicating with the Canon in "Bi-directional" mode whereas it was using "IEEE 1284.4" for the HP. Any attempt at printing results in the JD replying with "FF" and immediate shutdown of the connection. Is it a lost cause to try to get the Canon operational using the JD or does anyone have some voodoo?
View 1 Replies
View Related
Sep 21, 2009
I want to get my Canon MP210 printer / scanner working under Fedora 8 Linux. When I plug the USB cable in, I get a little popup with a setup wizard, but my printer isn't even in that list. I've tried the system-config-printer wizard as well as going in through the control panels and trying everything reasonable.
View 5 Replies
View Related
Dec 10, 2010
I'm getting mad trying to use a HP Business Inkjet 2200 over the network with my brand new Fedora 14 box.. The detection part is OK but I can print only 1 page, whatever it is: the test page or the first page of a document. After that, the printer is locked in "print" mode and no one can print any more until it was power down and powered up again. I say that it is locked in "print" mode because its LCD screen displays "print" instead of "ready".
I've tried all the different drivers available (foomatics and other gutenprints).I've tried with the JetDirect protocol or through a samba share.Always the same result: only one page printed then locked for every one..I'll try to find a way to attach the cups troubleshoot and a wireshark capture, they're to big for now..Could any body help me ? If not for me, do it for the community: my colleagues there all say that's normal since I'm using linux!!!
View 2 Replies
View Related
Mar 20, 2010
i am having trouble installing my multifunctional Canon MP190 under openSUSE 11.2 x64. I have downloaded the 32-bit drivers (there are no 64-bit drivers available) from Canon 's site (PIXMA MP190) in .rpm format but that 's about it This is what i have done so far:
1) I untarred the file i downloaded ("MP190_RPM_drivers.tar")
2) Inside there are 2 more tar files
- MP190_RPM_printer.tar
- MP190_RPM_scangear.tar
3) Trying at first to install the printer functionality, i untarred the "MP190_RPM_printer.tar" file and i got 3 more files
- cnijfilter-common-3.00-1.i386.rpm
- cnijfilter-mp190series-3.00-1.i386.rpm
- cnijfilter-common-3.00-1.tar.gz
4) I tried clicking the file "cnijfilter-common-3.00-1.i386.rpm" but it gives me an error saying:
Code:
Subprocess failed. Error: RPM failed: error: Failed dependecies:
libpopt.so.0 is needed by cnijfilter-common-3.00-1.i386
View 9 Replies
View Related
Apr 8, 2010
Im attempting to install a Canon MX330 as my default printer. I have made reference to several posts that deal with Canon printers and have followed them without success.
I first searched [URL] for the appropriate drivers and came up with -cnijfilter-common-3.10-1.i386.rpm and cnijfilter-mx330series-3.10-1.i386.rpm.I then issued rpm -ivh for both, but got the error message libpopt.so.0 is needed by cnijfilter.I then issued ls -l /usr/lib/libpng* and saw that libpng.so.3 wasn't found. I next issued zypper in libpng3 and then -- ln -l usr/lib64/cups /usr/lib/cups and ln -l usr/lib/cups/filter/pstocanoni /usr/lib64/cups/filter Then I issued /etc/init.d/cups restart. Finally, I entered ln -s /usr/lib/cups/filter/pstocanonij /usr/lib64/cups/filter. ls -l /usr/lib/libpng* shows ---
and smoltGui shows that the driver for the printer is still unknown.If I try to use Cups to install the printer, I can't get past the screen that asks for the driver, since my driver is not listed and I don't know how to enter both drivers as new PDDs.
View 9 Replies
View Related
Mar 24, 2011
I have just installed OpenSUSE 11.4. Everything works perfectly on my HP Probook 4520s. Except my canon printer LBP3100. I downloaded the files from Canon for the CAPT and CUPS drivers ver 1.90. Installed and did exactly as they said in their manual. When I plug in and add printer with YaST, Open SUSE sees the printer and installs it. However when I try to print, nothing comes out!!
View 9 Replies
View Related
Mar 19, 2010
I have just installed SUSE 11.2, but although my ip3000 shows in the hardware, I cannot get a correct print out on A4 paper and I am informed that no driver is available. There must be a work-around for this?
View 6 Replies
View Related
Jun 11, 2010
I am interested in acquiring a Canon MP620 printer scanner. I am looking at the printer list from linux.com, and I don't see it there. Wondering if it works really good with Opensuse.
View 5 Replies
View Related
Jul 24, 2010
I can't seem to get the drivers to install properly. I'm back in dependency nightmare stating it's missing libpng12.so. Located and tried to install it but states that it's already there.
View 9 Replies
View Related
Oct 15, 2010
It's weird because it did not even print different shades of gray (for the colors), as though I set it to print to black-and-white, when clearly I did not.
View 3 Replies
View Related
Oct 17, 2010
I recently upgraded (fresh installed) from OpenSUSE 10.3 to OpenSUSE 11.3. One thing I noticed missing was support for my Canon MP600 printer. Searching around, I found a solution on a Finnish OpenSUSE support page (which I translated with Google):
Canon MP600 ei asennu
Here's the fix:
1. Download file Linux_Print_Filterv270.tgz from Canon Print Filter for Linux (rpm)
2. Unpack with: tar xvzf Linux_Print_Filterv270.tgz (this also has support for other printers, including MP610, MP510, IP3300, and IP4300).
3. Install cnijfilter-common-2.70-2.src.rpm
4. Install cnijfilter-mp600-2.70-2.i386.rpm
This errors out with missing dependencies:
# rpm -Uvh cnijfilter-mp600-2.70-2.i386.rpm
error: Failed dependencies:
libgdk-1.2.so.0 is needed by cnijfilter-mp600-2.70-2.i386
libglib-1.2.so.0 is needed by cnijfilter-mp600-2.70-2.i386
libgmodule-1.2.so.0 is needed by cnijfilter-mp600-2.70-2.i386
libgtk-1.2.so.0 is needed by cnijfilter-mp600-2.70-2.i386
libpng.so.3 is needed by cnijfilter-mp600-2.70-2.i386
libxml.so.1 is needed by cnijfilter-mp600-2.70-2.i386
5. I forced the installation using
zipper install cnijfilter-mp600-2.70-2.i386.rpm
Then select option "2" (break dependencies):
Solution 2: break cnijfilter-mp600 by ignoring some of its dependencies
Choose from above solutions by number or cancel [1/2/c] (c): 2
and it installs perfectly.
6. If you're using 64-bit openSUSE Linux (as I am), you need to copy the print filters:
mkdir -p /usr/lib64/cups/filter && cp -p /usr/lib/cups/filter/* /usr/lib64/cups/filter
7. Install the printer as usual.
I selected the MP610 CUPS+Gutenprintv5.2.4 simplified driver for my MP600 and printed a test page. The MP610 drivers work for MP600. There are about 4 of them, and I didn't try the others, but my guess is they will work also.
View 2 Replies
View Related
Nov 27, 2010
I just downloaded and installed openSUSE 11.2. It looks good. Very fast and extremely stable.
My problem is that I use a 'Canon MP280' Printer / Scanner / Copier.
It seems that my printer and openSUSE are not compatible.
OpenSUSE can't find Canon MP280.
View 6 Replies
View Related
Dec 18, 2010
When I try to instal the rpm I downloaded from canons support website after authentication the install process fails with the following error report: [PK_TMP_DIR|dir:///var/tmp/TmpDir.kLgXId] Repository already exists.
I believe the packages I download (cnijfilter-common-3.40-1.i386.rpm and cnijfilter-mp250series-3.40-1.i386.rpm) are fine--not corrupted.
View 7 Replies
View Related
Jan 14, 2011
I'm trying to get my Canon Pixma MP510 scanner to work under openSUSE 11.3. Canon Linux Support doesn't seem to have anything for 11.3, but sane claims to provide basic functionality. The printer is working fine, but I don't manage to configure the scanner.
I tried to configure via YaST, but the following happens: The scanner is found, but (correctly) labbelled as "not configured". Clicking "Edit", the PIXMA MP510 is listed and a driver suggested: "Canon PIXMA MP510: (Package sane-backends) Driver pixma should provide basic functionality (USB-ID 0x04a9:0x1717)" If I select this option an click on "Next", the window crashes and I get the following error in the KDialog window, but I have no clue what it means: "YaST got signal 11 at YCP file Wizard.ycp:849 /sbin/yast2: line 399: 5663 Segmentation fault $ybindir/y2base $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS"
Is this a YaST problem? Or driver related? I thought about configuring the scanner without YaST, but don't know how to do it. I tried to google a HowTo, but couldn't find anything useful.
The command "sane-find-scanner" successfully detects the scanner, "found USB scanner (vendor=0x04a9 [Canon], product=0x1717 [MP510]) at libusb:001:004", but the command "scanimage -L" yields "No scanners were identified."
how to make YaST configure my scanner? Or how to configure it without YaST?
View 9 Replies
View Related
Jan 18, 2011
I'm trying to get photos off my Canon PowerShot SD1100 IS but while Device Notifier pops up telling me I've attached a canon, and I can see it when I run lsusb, It's not actually being mounted anywhere, or creating a device for itself to be mounted with..I plug the camera in to the computer while it's still off, and I turn it off again before disconnecting (As I've heard this is the proper way to do this.) but I am still not getting a device. I've also tried the following advice (Although I'm obviously on openSUSE not Ubuntu).Ubuntu Forums - View Single Post - Unable to mount camera or import digital pictures.
View 9 Replies
View Related
Sep 6, 2011
I have just installed OpenSuse 11.4 on my old desktop Compaq Presario, I coming from an amount of experience with Linux, anyway, for the moment I have a problem with my printer connected on a domestic network, this printer have an assigned address as the same as for my desktop and all other devices of this network, but I'm not able to connect with it, if I try to connect the printer by USB I haven't no problem, more strange is because of the printer have got a scanner and I was able to connect it via network, the same problem I had with Ubuntu.
View 9 Replies
View Related
Jan 29, 2010
I have recently purchased a canon pixma mx330 all in one printer. I tried using yast on 64 bit opensuse 11.1, kernel version 2.6.27.7-9 to locate the necessary driver to no avail. Is this a futile attempt or is there a driver that yast can't find.
View 1 Replies
View Related
Mar 11, 2009
1st. I still haven't got a reliable working printer driver direct on linux.
2nd. I am currently using the driver via smb to a windows box.
Okay there is no x86_64 driver for the capt drivers, that I could find. But you can download the standard linux drivers, which also contain the source.
The easiest way to get a 64bit driver is to unpack the drivers.
You will find a directory Src. In there are two source packages.
Copy both to /usr/src/packages/SOURCE
unpack both in a temporary directory.
I can't say which other packages you need to compile and build all of this, but you will need the c++ compilers, and various -devel packages. I would just add them via yast as you go along.
Anyway off to work out how to get this working directly on linux reliably.
View 9 Replies
View Related
Feb 23, 2010
I recently installed openSUSE 11.2 on a computer with a Canon i860 printer attached to it. Previously this computer had Ubuntu 9.10 installed on it. When Ubuntu was installed on it, the computer found and printed on the Canon i860 printer just fine. When I installed openSUSE, the list of Canon drivers did *not* include the Canon i860. Just for giggles I selected Canon BJC 4000.
It prints, but it "misbehaves" - For example, if I want to print a document that says only "Hello world", it will print it, but it prints it about 20 times on one sheet. I figure this insanity is caused by the improper driver I selected. I'm not expert enough to know how to get this printer working. And - why would it work okay in Ubuntu 9.10, but not openSUSE 11.2? Did I do something wrong while installing openSUSE?
View 3 Replies
View Related
Jul 9, 2010
I just acquired this printer. I would like to get it to work with my laptop.I'm running OS11.2 I've looked in yast but it isn't listed. Looked in Canons website and didn't find a driver for linux.
View 9 Replies
View Related
Oct 23, 2010
I have Canon MF4150 printer. I have downloaded Linux Printer Driver (UFR II) Ver.2.10E from canon asia site. Adding the printer and printing work fine, except that after one printing, the printer stops working. There is no error message./var/log/cups/access_log shows
Code:
localhost - - [23/Oct/2010:19:53:55 -0500] "POST /printers/Canon-MF4100-Series HTTP/1.1" 200 45240 Print-Job successful-ok
[code]...
View 1 Replies
View Related
Jan 1, 2011
I have a Canon S95 digital camera that used to work just fine. I plugged it in, the device notifier showed a couple of actions for it, I chose digiKam and downloaded the photos. Now I tried to get new photos out of the device, but it's not showing in the device notifier any more. DigiKam shows "Canon Inc. Canon Digital Camera (auto-detected)" but doesn't do anything when selecting it.
In dmesg I see:
[ 988.197025] usb 1-3: new high speed USB device using ehci_hcd and address 4
[ 988.313730] usb 1-3: New USB device found, idVendor=04a9, idProduct=3212
[ 988.313734] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 988.313738] usb 1-3: Product: Canon Digital Camera
[ 988.313741] usb 1-3: Manufacturer: Canon Inc.
[ 988.313743] usb 1-3: SerialNumber: [number]
So it works but KDE doesn't seem to be able to notice it. I'm using openSuse 11.3 with KDE 4.6 RC1, and it might be that 4.6 betas/rc broke the functionality though I'm not sure.
View 5 Replies
View Related
Mar 27, 2011
Have updated my system to 11.4 (Fresh install) and installed the driver from canon, and when you print the test page, it prints fine. But it now when I want to print a pdf or web page where it will say printer data error on the printer. Another thing is that it seems to print fine when the document is plain text like if I print a document from libre, it will print or when i send a print test page. Also when the document does not go through, the cnpkmoduleufr2 sits in memory and then chows 50% of cpu. In 11.3 worked beautifully so am thinking that this is a software issue.
View 8 Replies
View Related
May 8, 2011
When I try to set up my printer a Canon Pixma MP530, there is no driver! Only the Generic ones and they don't work. On Ubuntu using the Pixma MP500 driver works just fine, but there is no option for that on suse. Only for HP and Generic. The only solution I have found was turbo print, and that costs $30. I am hoping to find a solution, I really like SUSE, but I may have to go back to Ubuntu.
View 9 Replies
View Related
Jan 23, 2010
I need to install the driver and I downloaded the Canon install package. The instructions read:
# rpm -ivh [file name of common module for CUPS drivers]
This rpm package construct was used in the Fedora distro.
Does it also work in openSUSE?
The only other construct given was for a deb package.
I looked in YasT for the driver but it was not there.
View 9 Replies
View Related
Jan 7, 2011
I'm trying to get my Canon Pixma MG 5150 scanner/printer to work. While the 'printer' is doing well the 'scanner' appears to be stubborn. I use the scangearpm-MG5100series-1.60-1 driver provided by Canon which is said to be fine with Suse 11.2.
The trouble is, that though the scanner scans it does not deliver anything back. Here are the details:
When I run scangearmp as root in a terminal I get the following output:
Code:
(scangearmp:6902): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
[Code]....
View 9 Replies
View Related
May 7, 2010
Need to install a Wacom Intuos2 tablet. ALso Have a Canon MP620 multi-function printer that YaST does not see. It tells me that it is a bad port. I have pinged it and it is there but YaST won't let me install it.
View 8 Replies
View Related
Aug 4, 2010
I have a canon pixma mp640. Under opensuse 11.2 64 bit the printer worked (printing and scanning via wifi). I recently reinstalled my system with 11.3 64 bit, and after installing the canon rpms and creating the printer I get the following error in /var/log/cups/error_log:
Code:
Backend returned status 1 (failed)
printer-state-message="Illegal backend: Success"
In opensuse 11.2 I needed to create some links:
Code:
cd /usr/lib64/cups/filter
ln -s ../../../lib/cups/filter/pstocanonij
cd /usr/lib64/cups/backend
[code]....
View 6 Replies
View Related
Nov 13, 2010
Bought a Canon all-in-one (printer, copier, scanner) today, which prints beautifully on XP & connects to our WiFi without problem. Only downside, is it can't find a driver for Linux. Anyone out there using this printer under Linux, or any pointers to the right driver?
View 3 Replies
View Related
