I'm running oS 11.3 KDE 4.6.3. If I try to delete a read-only file in the terminal I can, but get a warning message I have to confirm:
[Code]...
In Dolphin the file is simply sent to trash, no warning. I couldn't find a setting in Dolphin configuration options to change this. I do have "Ask for confirmation. when moving files and folders to trash" unchecked, but even so, if the file is read-only?
I'm trying to get Eclipse IDE running on my openSUSE 11.4 (KDE).
I have downloaded Eclipse Classic from Eclipse Classic 3.7 | Eclipse Packages. I started Dolphin and extracted the tar.gz file to a directory called eclipse. Now, as I understand, to run Eclipse, I must run the executable eclipse. But when I double-click eclipse, I get an error saying, "There is no application installed that can open files of the type executable (application/x-executable)."
Note 1: I have uploaded 3 screenshots as an album at Imgur: Eclipse with image titles and captions.
According to the screenshot #1, the file eclipse has a permission set of -rw-------. The execute permission is missing on this file. So, here's what I did: (screenshot #2) Right-clicked and selected Properties and under the Permissions tab, checked the Is executable checkbox and clicked OK. But still (screenshot #3), the permission set remains the same.
Note 2: The parent directory permissions are visible in the Terminal window below in all the screenshots.
What should I do to make eclipse executable?
What are the possible problem when Windows access the file from Ubuntu got Read Only even though have a full permission to read, write and execute the file? Ubuntu to Ubuntu accessing the file there is no problem only Windows got a problem.
View 1 Replies View RelatedI'm fairly new to linux and I have a dual boot laptop with OpenSUSE 11.2 and Windows 7. I have ntfs-3g and have full read-write ability to my Windows drive through OpenSUSE thanks to NTFS - openSUSE. The only problem is whenever I write to the NTFS Windows drive via Dolphin it does the writing but I get an alert box saying:
"Could not change permissions for <path to new file>" with an OK button.
If I write more than one file I'll get one alert box for each file unless I don't press OK until after it finishes writing all the files in which case it will just give me that one that it was showing (once I press OK there aren't any more boxes).
Since I have full ability to read-write this isn't that big of a problem it's just annoying as hell an I'm sure it's pretty simple to get rid of. code...
I'm using Dolphin 1.5 on KDE 4.5.1 on openSUSE 11.2, 11.3 and 11.4(M1).
I select a folder and right-click to get "properties." On the "permissions" tab, I select "advanced permissions." Up until that moment, everything is the same on all three versions. Then -
On 11.2, I get a panel sub-headed "access permissions" which has one column headed "special" which has three buttons. Below that is a panel in which I can add, edit or delete entries so that I can, say, grant one user special permissions.
On 11.3 and 11.4, I get a panel with the same heading, "access permisssions," but which is very different apart from that. Below the heading is a table containing 4x3 buttons for setting "user," "group" and "others" but no panel such as in 11.2.
This different behaviour occurs for the identical user and folder. I've checked that Dolphin preferences are the same for 11.2 and 11.3. Why am I getting a less useful display from the later versions of openSUSE?
my internet connections works via my eth0 adapter. For Windows user this may be fine, but I actually would like to know what makes it connect. My /etc/network/interfaces shows:
[code]...
No eth0 mentioned here. dhcp3/dhclient.conf consists only of commented-out lines, so no eth0 here either. In /etc/init.d I see there is this networking daemon. When I do
[code]...
that magically enhanced eth0 works even if you want to shut it down. No wonder I don't get my wlan0 working, my PC doesn't seem to care about anything I am configuring here.
Suppose I have a binary program with only execute permission enabled for the current user. How (in general) would I be able to obtain a core dump of the file? I think I have read it somewhere but I want to know if there are more ways of doing it.
View 1 Replies View RelatedJust installed 11.3 and upgraded kde to 4.5. Install is on Toshiba notebook with Win7 and Mepis 8.5.
Ntfs and all other partitions show in fstab and partition manager but not in Dolphin or Konqueror.
How to see and mount other partitions?
Trying to use tcpdump -r TEST, and get permission denied, even though I am logged in as root or super user. Tried using the "chmod a+rw TEST" (any other file for that matters, yes it came from another source) and get permission denied.
View 4 Replies View RelatedDolphin gives errors below:
Application: Dolphin (dolphin), signal: Aborted [KCrash Handler] #6 0xffffe424 in __kernel_vsyscall () #7 0xb5bad7ff in raise () from /lib/libc.so.6 #8 0xb5baf140 in abort () from /lib/libc.so.6 #9 0xb5dc17dd in __gnu_cxx::__verbose_terminate_handler() () from /usr/lib/libstdc++.so.6 #10 0xb5dbf533 in ?? () from /usr/lib/libstdc++.so.6 #11 0xb5dbf56f in std::terminate() () from /usr/lib/libstdc++.so.6 #12 0xb5dbf6d1 in
[Code]....
Questions:
1) How can I learn which packages I've deleted or installed to make the changes back - I mean install deleted packages and delete installed by mistake?
2) Is there an instrument to make a complete system roll-back to some time point?
I've just noticed my Dolphin compress service menu doesn't compress anything except for '*.zip'. It used to compress '*.tar.gz' and '*tar.bz2' but now none of these work, and the bz2 option is gone altogether.Does anyone know what might have happened?I have openSUSE 11.3 & KDE 4.6, but this happened before I upgraded to KDE4.6 just a few days ago, so it's not KDE4.6 related, maybe 4.5? maybe Dolphin?I also tried to install the extract/compress plugin but it says "Could not find program 'compress_TARBZ2.sh'" which all are in my /bin folder. I also checked I have all the extract/compress file installed: zip, tar, gzip, bzip and so on.I also tried 'Compress to...' which open Ark, then I selected either 'gz' or 'bz' and still nothing happened.
View 9 Replies View RelatedI have a brand new install of 11.3, with all the updates, on a cleaned system, following some hdd and cable problems.
So far three problems have surfaced:-
1. Dolphin doesn't see and hard disks other than the root hdd.They appear on the left side in the list, but cannot be accessed as suse seems to have chosen not to mount them.I need them because they have my backup data on them.
2. At each bootup, I have manually to reset the required screen resolution. I need to prevent it defaulting to the wrong resolution every time.
3. I cannot now see my Windows workgroup at all. This is in stark contrast to another distro I've tried which found it and set everything up automatically. The workgroup has one WinXP machine on cable via a router, plus one Win7 machine via router and wifi link. I guessit failed to sort out smb.conf or something?
I am completely new to Linux and picking things up slowly. I have a question about mounting my NAS NV+. When I mount it, i use the following commands when logged on as user "matt":
sudo mount -t cifs -o rw,username=Matt,password=matt //192.168.2.15/Matts /home/matt/GRUMPY/Matts
sudo mount -t cifs -o rw,username=Matt,password=matt //192.168.2.15/Torrents /home/matt/GRUMPY/Torrents
sudo mount -t cifs -o rw,username=Matt,password=matt //192.168.2.15/Media /home/matt/GRUMPY/Media
sudo mount -t cifs -o rw,username=Matt,password=matt //192.168.2.15/Programs /home/matt/GRUMPY/Programs
GRUMPY is the name of my NAS by the way! It mounts properly, BUT i cannot delete or rename files, so basically the user "matt" has read only privileges, and root has ownership of the mount. How do I go about mounting these so that user "matt" has RW privileges?
When I log on as root user and mount them, I can read and write as required, so this has led me to believe that my problem lies in my permissions for matt when mounting them... I posted on the netgear forum and was asked to try and mount using the following command:
[Code]....
GNU GRUB 0.97
Ubuntu 8.04.4
2.6.24-26
Added an SSD (dev/sdc) and decided to move some less often changed directories there. Started with /usr and /boot, leaving / on a primary in the first drive, for now. All started ok, and my changed fstab mounted the right ones, and the system works.
However, grub is actually using the original /boot on / on sda1. I cannot see any way to change this. (Which makes it sorta hard to update the kernel
From grub:
Okay, since it has two choices, I tried to tell it which one to use. But, grub> root (hd2,5) does nothing.
Disk /dev/sda:
what I seem to recall, grub doesn't care about the boot flag on the disk. Nor does it care about primary vs. logical (except GNU doc says "makeactive" only works on a primary?).
The GNU doc also indicates that it looks for a directory /boot on the partition, so if you're mounting a partition as /boot, it also needs to contain a /boot directory under it. Tried that, but no change.
Is my problem the logical partition? Does that prevent "grub> root" from changing it? I'm afraid to wipe out the old /boot and find that I can't start up.
I am trying to change the owner permission of file as "read only" when the file is rcp remote copy ) from server to another for security reason. Any way to change to permission as readonly access for owner and group ( 550 )when transfer the file using the rcp command ? I tested but still retain the original permission as source file.
Version : RHEL 5.2
Command : #rcp(local file)(/destinationserver/
/folder/file)
[code]....
When I copy files from one partition to another, or from one drive to another, the transfer rates hover around 5-8MB/sec which is kind of slow given that all my hard drives are SATA II. I have the same problem when copying either a single file or a group of files.
I'm running openSUSE 11.2 x64 here (KDE 4.3.5) with three SATA II hard drives that are all formatted with ext3. I have dropped to the CLI and used mv and cp instead - this seems to improve things but I shouldn't have to do this.
Sometimes the Dolphin file manager displays a "waiting bar" with a blue dot moving left and right all the time.There is a message next to it, stating that the file folder is being loaded. But I do not know that there is anything happening, nor is there any need to load anything. There is also a little red "delete" button, but klicking on it achieves nothing.
View 2 Replies View RelatedI found that sometimes if I have opened file manager window (Dolphin) it does not refresh list. Example, if I already have Dolphin opened and then create file in Terminal - i need to press F5 (refresh) to see newly created file
View 9 Replies View RelatedWhen I create a new file/folder in a ext4 data partition, it has permissions:
owner: rwx
group: r
other: r
I would like to change this default to:
owner: rwx
group: rw
other: -
I tried changing fstab, but umask and guid are not supported mount options for ext4. What can I do?
Note: I know I can do a chmod, but I don't want to do this again and again for every new file I create.
I'm using 11.3 x86-64 KDE4.4,I bought a Corsair 4GB thumb drive last week,but when I tred to transfer some file from Dolphin to Corsair,the 'paste' selection in pop up is grey color,it means I couldn't paste thing into this thumb drive. I tried to modify the permission of this thumb drive,but failed,it pop up said I have no permission to do that.And when I download a .rar file tried to extract it with Ark,it loading the archieve like never ending,what's the problem?
View 3 Replies View RelatedSo I have a large collection of VCDs (they used to be very popular and cheap here before DVDs became popular - basically just Data CD with a specific file structure) which I was transferring to my harddrive for easier viewing.
I stopped a few months ago and wanted to do some more today, but find that I can't access them anymore. The VCD is mounted ok, and I can see the root folder, but when I try and go into any folders, Dolphin hangs, the message log shows this over and over again:
Code:
I have tried with 2 different DVD drives (both IDE, on different channels), and confirmed the disk works fine when accessed from Windows on the same hardware, so the problem must be with Fedora.
Kernel: 2.6.30.9-102.fc11.i686.PAE
Following the last update bringing kmail 2.0.89 it does not start any more. I get a popup signaling a fatal error : "no read/write permission to your inbox folder". But these permissions have not changed. And even if I move away the Mail folder and try to start kmail I get the same message.
[code]...
This kmail version given by YAST is : 4.5.80-261.1
Every time I try to empty the waste bin I get dolphin error - 'The file or folder /.local/share/Trash/files/IMGP1676.DNG does not exist'I tried to recreate the file 'IMGP1676.DNG' , deleted it i.e. sent i to the waste bin and then tried the empty waste bin again, although this time it was there and deleted it still reported the same error.du -h .local/share/Trash/files/ 12K .local/share/Trash/files
View 2 Replies View RelatedI have a weird problem on my laptop. Everything works okey on PC though.
I'm using kNetworkManager on my OpenSuse 11.2 on PC.
Everything works fine there with the following settings:
1. Make a new GSM Connection in kNetworkManager and enter settings there
2. Edit etc/sysconfig/network/config file and set .....DNS_Policy from "auto" to ""
3. Enter openDNS to /etc/resolv.conf (nameserver xxx.xxx.xxx.xxx)
It works like that on my PC.
I did the same on my laptop. The modem connects fine, but the DNS'es ain't resolved. So skype etc will work, but no pages will open in Firefox for example.
What else should I need to do to make this work?
It's weird it works the SAME way on my PC, but doesn't on my laptop.
Anyone else seeing Dolphin's Context Menu on a file, Actions -> Preview This File not working for them?
Does anyone know how to fix it to work?
I am using openSUSE KDE 4.
I know that this is easy, but I am confused.I have three computers all with a clean install of SUSE 11.2. Two of them use wifi with the internet and the third is wired.I would like to share files between them all of them.When I go to dolphin/network there is nothing there and I don't know how to set it up.
View 1 Replies View RelatedI'm using KDE 4.3.5, openSuse 11.2 x64 and have a problem with Dolphin. I have to enter passwords for ftp, sftp and smb connections every time I try to open something, even with "Save password" option
View 3 Replies View RelatedI'm using ubuntu 11.04, I'm having some problem of ownership while sharing folder/files. to share i change the folder share option:1. Share this folder, then followed by 2.allow others to create and delete files in this folder3. guest access.Now if someone in my local network edit any file and save it, it gets locked. if some one copy their file in this folder the permission is marked as "no group" "no owner". and they get unaccessible to me. i tried doing chown <user> <folder> but it says Operation not permitted. Now how i can possibly share my folder on local network so that they can be edited by others without getting locked down , if they copy files i can able to modify them.
View 2 Replies View RelatedI trying to read a file with an .odc extension.Using openOffice Calc, However there is a of garbage and irreadable characters, I found out it is a Microsoft office data connection file. Is there a way around it?
View 4 Replies View Relatedi need 2 king of permission 1 is full access and other is read+exceute. it can be by ip by userid or by group. as i am beginner try to find such example cant find it so far see below my smb.conf file
[Code]....
