OpenSUSE :: Compiz No Window Deco Working 11.4 KDE4.6.0?
Mar 28, 2011
There is a thread for 11.3 with problems on window deco with compiz Compiz - no window decorations for compiz in 11.3, kde4I thought I might start one for 11.4.11.4 KDE4.6.0 64-bits.I have posted in the above link, saying what I did and also why I need compiz and not kwin as my window manager. This means KWin is not a replacement for me.So I wonder if anyone got compiz working with any of the window deco in 11.4 KDE4.6?Other option I could post errors I get when I start kde4-window-decorator inside compiz. No I cannot use emerald (it's my favorite) cuz as explained in the above post, the basic package does not seem to exist in any repo so far (for 11.4). Not sure if I can compile it yet, might want to take a look at that as well.
View 3 Replies
ADVERTISEMENT
Mar 13, 2011
In 11.3 Compiz .8.x worked fine but not .9.x
In 11.4 "compiz --replace" displays no error messages, but starts up with no window decorations.
In ccsm window decorations, kde comparability, OpenGL and composting are all checked. Even tried as a different user after rm'ing the compiz-1 folder.
Composting using Kwin works fine.
View 7 Replies
View Related
Sep 24, 2010
I was using the open source ATI drivers and KDE's compositing worked, so I hadn't installed compiz. I wanted to try fglrx because I thought a) I might be able to get temperature readings, and b) it might stop Kubuntu from making my computer incredibly hot (in Windows 7 it stays cool). So I installed fglrx by enabling it in the restricted hardware drivers thing, and things worked, but compositing was disabled and no matter what I did I couldn't enable it. So I installed compiz. When I run compiz, I get the following output:
Code:
toby@tensile:~$ compiz --replace
Starting kde4-window-decorator
[code]...
View 3 Replies
View Related
Jul 18, 2010
New 11.3 install and working the wiggles out one at a time. If I minimize a window on the desktop it just disappears. Any and all open windows. Can't figure out how to maximize it again. They still active somewhere because I have to kill it (crtl / esc / kill process) to close Firefox and any other windows regardless of the application. Where are they going and how I do I modify this behavior
View 5 Replies
View Related
Apr 1, 2011
I've recently installed Ubuntu on my laptop, and I installed Compiz from the software center. I went to the animations section and set different animations, but they don't take effect. I've tried disabling them and re-enabling, I've tried restarting, but nothing is working. What can I do to fix this?
View 4 Replies
View Related
Jun 20, 2010
I'm not sure about anybody else, but I have spent many hours today trying to figure out how to get Compiz as a window manager. Alas, I have tasted success. Once compiz and Emerald are both installed, simply go to Code:Configure Desktop > Default Applications > Window Management and then select from the drop down menu.Now those beautiful emerald themes will work. I have seen many other 'solutions' for KDE4 and they may have worked for some, but not for me. I hope this will help somebody who may be as frustrated as I was.
View 3 Replies
View Related
Aug 20, 2010
I recently installed the brand new Open Suse 11.3 on my new Dell Studio. I installed Compiz and other packages from official repo. But after installing when I used the desktop configuration utility to change the default Window Manager to Compiz all the window decorators like window title , minimize maximize, close buttons were gone. I tried searching for emerald fusion theme manager only to find out tht these have been dropped and older repos have been deleted.
I am not liking the default Window manager. I wanted to get themes like before. I have been using Suse for the last 6 years but this is the first time I am not able to get what I want. I just dont like this default manager. I want the look which looks better than Windows 7 ...
Processor: Intel Core i7 1.76GHz Graphics: ATI Mobility Radeon 5470 1 GB (Using the latest driver) I have 3D running Using ATI Driver
View 9 Replies
View Related
Sep 10, 2011
After installing opensuse 11.4 (64bit- gnome 2), enabling compiz effects makes windows' decorations disappear.
I can solve this by doing
gtk-window-manager --replace
but I have to do this every log in.
View 8 Replies
View Related
Jan 17, 2010
Is there some way top stop the "blind effect" of compiz so that when you double click the top title bar of a window that it maximizes the window instead of the rolling up type effect? Also when i place my mouse on the top right of the screen it brings it to a choosing window type mode where you can pick which window you would like to open, is it possible to get this on the top left of the screen instead? Lastly when I use Kdebluetooth4 to send a file to my computer where does that file save to?
View 2 Replies
View Related
Apr 23, 2010
I recently upgraded the motherboard/processor on my computer (as in quadrupled the processor and octupled the ram). The new board has a built in GPU (intel) and from searching the forums, I think this is part of the problem. Every time I boot up the computer, I need to open the Compiz icon and use it to reload the window manager before I see any title bars, borders, etc. 've tried the .bashrc hack (metacity --replace), but that doesn't do anything. In fact, whenever I open the terminal, I need to have two tabs open in order to use it, and when I close it all the borders go away again (even when I haven't done anything). Also, the onboard sound card (intel) doesn't work, but that's another task (I at least have a compatible card for that).
View 9 Replies
View Related
Jan 16, 2010
I have a new system with Asus M3A78-EM mobo, 4 GB RAM, AMD Phenom II quad-core 955 3.2 GHz CPU, on which I've installed the 64-bit version of openSUSE 11.2. It's a lightweight server as well as a desktop machine, and is on 24/7 (and on a UPS). The problem is that the system reboots itself spontaneously, on average a couple of times a day, at seemingly random times. After one of these reboots, an examination of the system log shows nothing at all suspicious logged in the minutes prior to the sudden reboot. Sometimes the system recovers after the reboot, but about half the time the KDE4 desktop comes up with the keyboard and mouse not working. The system log in that case shows that the USB subsystem is wedged, with the message "task khubd:38 blocked for more than 120 seconds", followed by a series of call traces. At that point, I can usually log in via SSH from another local machine and execute a shutdown/reboot, and the system usually recovers fully after that... until the next spontaneous reboot. The only thing unusual about my USB setup is that I have a Hauppauge HVR-1950 TV tuner plugged in, and the pvrusb2 driver installed on the system.
The mobo has an onboard ATI Radeon HD 3200 graphic controller, and I installed the proprietory ATI driver for it in the hopes of improving system stability. It didn't.
Due to the lack of syslog warnings before one of these reboot events, I was inclined to think the hardware was at fault, and my first thought was bad memory. However, fairly extensive testing with memtest86+ showed no errors. Of course, it could be other more obscure hardware problems, but it would be nice to be a little more certain before I resort to replacing the motherboard or the whole system.
Other info... booting in failsafe mode doesn't seem to cure the problem. Setting acpi=off in the boot menu doesn't seem to help either. There are some suspicious things in the boot log, though, such as:
My system does not have ECC memory, so it is indeed properly disabled in my BIOS. Again, I see discussions of this bug(?) on the net, but little indication of whether it is anything serious.
At this point, I'm running out of ideas... I'm still not sure whether the hardware or openSUSE 11.2 are at fault, and I don't want to give up on either prematurely.
View 9 Replies
View Related
Jun 26, 2010
I just installed Compiz for KDE in my OpenSUSE 11.2. I use Compiz for my window manager but there is a problem. When I press Alt + Tab there is nothing happen. Is there anything I need to configure in Compiz?
View 6 Replies
View Related
May 13, 2010
Some of my applications use different window types for pull-down menus than what compiz window animation think. This means that I get normal open window animation on these pull-down menus instead of the menu-theme. Inside the CompizConfig you can specify exactly which window types the different animations apply to, and you can use "grab" to probe your window for this info. My problem is that I can't "grab" the info for the pull-down, since it leaves "grab" mode once I try to open the menu (and grabs the info for the parent window instead of the menu). How do I get to know the window properties of the pull-downs, so that I can map them to the relevant window animation theme?
View 5 Replies
View Related
Nov 28, 2010
I spent *#@$ hours trying to figure out how to change my default window manager to "compiz-manger".I tried using gconf-editor and .gnomercAnybody has an idea how to do this?
View 8 Replies
View Related
Mar 15, 2010
When I'm at uni I use the wireless internet. This works perfectly well. Due to some issues with another program I ended up installing KDE4 in addition to gnome, which I usually use. In gnome the computer can easily find and log on to the wireless network. However when I start a KDE4 session I can't get the wireless to work. I don't really understand why this is happening. I though it would use the same settings. How do I make the KDE4 wireless network manager use the settings from the gnome wireless network manager?
View 5 Replies
View Related
Jun 14, 2010
Has this feature been removed from the version of Compiz that comes with 10.04?I was running 9.10 for a few months and I configured a feature for zooming out windows into a kind of preview mode.I remember setting up a key combo and when I clicked on any window and pressed the combo, it would cycle between 2 preview sizes of around 25% and 10% and then back to it's normal size.I could drag a zoomed-out window around the desktop but obviously it would not be usable until it was restored to normal size.
The window contents would still update though and it was a great way of keeping an eye on many windows at once.I have looked at every single setting in CompizConfig Settings Manager but it's nowhere to be found and I really miss it!
View 3 Replies
View Related
Jul 27, 2010
I couldn't find a section for visual customization. Is it possible to make it so that windows not being used have a certain opacity, and windows being used have another? Also, how can you change the opacity of menus? I used to be able to do this, but it seems I've forgotten.
View 3 Replies
View Related
Feb 7, 2011
i just reinstalled compiz and nvidia drivers and i dont have the compiz window borders.
i have tried
Code:
compiz --replace
emerald --replace
emerald --replace &
with no change in borders.
View 1 Replies
View Related
Jan 9, 2011
I setup fedora 14 64 bit today itself and am loving it! But the problem i am facing is in compiz! When i enable desktop effects from System/Prefrences/Desktop Effects, everything works absolutely fine. All the effects... But when i try to resize a window, Compiz crashes and all the borders of the window disappear. The ABRT shows an error. Here is what it says
Package: compiz-0.8.6-3.fc14
Latest Crash:Sun 09 Jan 2011 05:44:37 PM
Command: compiz --ignore-desktop-hints glib gconf gnomecompat --replace
Reason: Process /usr/bin/compiz was killed by signal 11 (SIGSEGV)
Comment: None
Bug Reports:
View 4 Replies
View Related
Jun 17, 2010
I was hoping someone could tell me how to turn off the basic windows effects in compiz but keep it turned on so I can use something like Docky.
The reason is because nautilus takes a few painful seconds to open up with the effects turned on and some times I end up clicking a folder etc a second time thinking it hasn't opened.
View 2 Replies
View Related
Jul 3, 2010
(This started after I upgraded from Ubuntu 8 ) Everytime I enable desktop effects (system -> preferences -> appearance) compiz replaces the pretty New Wave window border with the ugly Emerald glass window border (custom border) that I used on Ubuntu 8.
View 7 Replies
View Related
Oct 10, 2010
I have just upgraded from 10.04 -> 10.10 and my 'scale' plugin is not working properly in compiz (the rest works well).I do have the effect working with "super+a, super+w" , but "edge" does not work.I can modify values via gconf, I have: "initiate_all_edge" set to "BottomLeft" but this doesnt respond.The weirdest thing is that the compiz scale options part instead of giving me 4 tabs of options -> gives this.(image below) i tried reinstalling a few times & purge compiz + install back, but result remained the same.
View 1 Replies
View Related
Apr 28, 2011
I just upgraded to ubuntu 11.04.
Before, I could move windows between screens by pressen "Strg-Alt-Enter" (a shortcut I configured myself). Now that does not work anymore.
I remember configuring this shortcut somewhere in ccsm, but now I can not find it anymore.
View 5 Replies
View Related
May 28, 2011
I'm running Compiz with the Classic desktop in Ubuntu 11.04. I've noticed that doing the slightest thing will make the window decorations disappear...enabling desktop cube, clicking the menu icon in the titlebar, whatever. I'm running two GTX 570s (not in SLI), could this be an nvidia driver problem or something else?
View 1 Replies
View Related
Aug 7, 2011
Compiz was installed and working when I installed the 'new' ubuntu. (x86-64) What I did:installed my nvidia driver, enabled secondary screen (twinview) Installed some extra compiz plugins using aptitude. Tried to enable the desktop cube, and with that automatically disabling the desktop cube. And bang, no more window frames.. I tried with GTK window decorator and with emerald. It doesn't make any difference. Now I am running meta-city and emerald without any desktop effects.
View 2 Replies
View Related
Jan 29, 2011
I use compiz but when I boot I need to reset the windowanager for it to function correctly :'(. It is not the end of the world, but it is annoying
View 14 Replies
View Related
Aug 8, 2009
For some reason, in both KDE and Xfce, when I enabled Compiz, the window theme turned red? How do I change or fix this. I really like Fedora blue
View 2 Replies
View Related
Nov 25, 2010
How can I change the window focus mode in compiz in F14? I prefer point focus rather than click focus, but the 'system -> preferences -> windows' cannot run in compiz environment.
Also, can I save the position of the terminal in compiz? I don't want to adjust the terminal positions manually after each logging in.
View 1 Replies
View Related
Jun 28, 2010
We've all probably had this issue at one time or another.Window borders disappearing when Compiz is enabled. I'm on 10.04 with Intel GMA 4500M graphics. I would say about 30% of the time when I boot up the computer, I have no window borders. I use the Compiz Fusion icon just for this purpose, to reload the window manager and get back the window borders.Of course, the other 70% of the time the computer boots up with normal window borders. Is there a more permanent solution someone can provide than manually reloading the window manager on an as-needed basis?
View 2 Replies
View Related
Oct 5, 2010
I'm trying to make Compiz activate at bootup, but I can't seem to get it to work. Basically, I'd like to make Compiz the default Window Manager in Kubuntu Lucid. How to accomplish this?
View 1 Replies
View Related
