Networking :: VPN - Post Connection - Unable To Locate Files?
Aug 24, 2010
I used my colleges online site to automatically install and setup the Cisco AnyConnect VPN Client. Everything went smoothly. I have a Cisco icon in my system tray and it says that I am connected to the VPN.
My question then is where do I access the VPN? I am assuming that I can access the other computers at the other end of the VPN as I would if they were networked to me, however I cannot seem to find any information on how this is done after the connection is made.
I looked in the Network folder which is where I figured everything would be, but there is nothing other than the normal, empty, network folders.
I am running Linux Mint 9, KDE 4.4
My friend Google let me down, and every VPN how to I can find ends at the "connected" stage, never getting into details about where to go from there...
View 6 Replies
ADVERTISEMENT
Oct 5, 2010
Anyone experiencing - unable to make connection? I'm just checking on the cause, will post back
View 2 Replies
View Related
Aug 11, 2010
I've acquired an old pc. The disc drive and the fan on the chip fire up as well as motherboard lights, and my monitor responds, but no display or post beep? Can you suggest a process of elimination that might locate the prob?
View 1 Replies
View Related
Sep 15, 2010
i set a pptp -vpn connection.but i cant post anything in facebook. is there any specific settings i have to do?
View 1 Replies
View Related
May 4, 2010
I wouldn't be posting this if I hadn't tried very hard for the past week to do this on my own, but alas, I failed. I have this two configurations:
Desktop:
- Ubuntu 9.10
- Connected to the internet though a wireless card
- Connected to "Laptop" via wired network with a crossover cable
Laptop:
- Dell latitude
- Ubuntu 9.10
- Connected to "Dektop" via wired network with a crossover cable
The wired connection is working, both computers are able to ping each other, but I haven't managed to share internet, nor files. I have tried many different ways, from setting the wired network to "Shared to other computers" to this guide in the Ubuntu Wiki. The best I could get was for the connection to work by setting the IPs manually, whatever else I try results in either nothing or in a not-working connection.
View 2 Replies
View Related
Sep 1, 2011
I am on Ubuntu 11.04 and using Libre Office 3.3.2 to compose new documents and am saving them using .doc, .ppt and .xls files. (due to having to share them with others who are on Windows systems)
I have a lot of doc files and I need to search for text INSIDE these files. I am perplexed with the fact that no search tool is able to search for text INSIDE these file types. "cat" can display them of course, but grep is not able to locate text INSIDE these file types. I even tried to save a .doc file as an .odt file, but no luck. The Applications>Accessories>Search for Files does not search INSIDE doc, xls or ppt with the option "Contains the text".
View 6 Replies
View Related
Jul 22, 2010
I'm able to connect to the internet wirelessly with my laptop running kubuntu 10.04 with no additional packages installed. I'm able to setup my connection using the GUI but I'm unable to locate where the configs are stored on the computer.
I thought the configs were stored in /etc/interface but the file never changes. Even after I'm connected, all it shows is
I'm using wpa2 with my wireless router.
The reason I need this is because I'm planning on installing ubuntu server edition and there's no GUI for wireless setup.
View 2 Replies
View Related
Apr 26, 2010
I've got a vmware install of Fedora 12 running as a server. This install has the /etc/sysconfig/network-scripts/ifcfg-eth0 file configured with the proper info and the service has been restarted. When I run ifconfig I only get the loopback interface, when I run ifconfig -a I can get the eth0, but without the pre-configured ip address. When I enter ifconfig eth0 up I can activate the interface, but without the afore mentioned ip address. I need to be able to yum ssh, install it, and run it with rsa keys. Can do none of this without an interface obviously.
View 3 Replies
View Related
Nov 23, 2010
I have a really weird (but consistent) problem with my Kubuntu 10.10 install: I cannot post some HTTP forms.
First off, this is a client PC problem. My squirrelmail on the server works fine. I just use squirrelmail 1.4.17 to troubleshoot the ubuntu desktop problem
I used an old (07.04) Ubuntu install which worked fine. Then I wiped the disk and installed Kubuntu 10.10 on the same hardware. Everything works but **some** HTTP post does not work (I can log in but not send mail or save draft). I noticed I cannot log in to Yahoo, for example.
My webhosting account can display the apache access_log. When I hit the <Send> button the POST request never arrives to the web server.
I use a router (Dlink DL-604) behind a DSL modem and ooma box. There is a Windows 7 PC and a Kubuntu PC connected to the router. I can use squirrelmail just fine from the Windows PC.
I tried several steps:
- reinstalled Kubuntu
- installed Firefox and Chromium (on top of reconq)
- ran from a CD on my other (Windows 7) PC
- installed Wireshark and compared the traffic (but was unable to pinpoint a problem)
The result was the same: the <Send> button just keeps waiting; the POST request never makes it to the web server.
This sounds (and is) scary and suspect. The fact that the "demo" Kubuntu install (from the CD on my other Windows PC) using the reconq exhibits the same problem on a totally different hardware leads me to believe this may be related to Kubuntu. For example, I had to type this very message on the Windows PC as I could not post it on the forum from my Kubuntu box.
View 2 Replies
View Related
Jan 15, 2011
I can't post messages, I think something is wring with my internet.Anyway, I'm gonna copy paste what I've been trying to say...I just bought the TP-LINK Model No. TL-WN821N. It's an atheros. And I was wondering where can I find the drivers for Linux. It only includes drivers for Windows.
I don't have much experience with networks,I found this website,
http:[url]......
I got stuck in the patch section, I don't know what they are trying to say. They are using
diff -urp compat-wireless-2009-02-22_AR9170_230209/drivers/net/b44.c compat-wireless-2009-02-22_AR9170_230209/drivers/net/b44.c
They are comparing the same file, there is some code they are showing but I don't know what they want me to do.
View 9 Replies
View Related
Aug 30, 2010
I have an issue in Gmail that has just started recently. When I'm logged into Gmail I sometimes have as many as 22-28 outbound connections and my NIC never stops sending and receiving data.When I log into Gmail this starts and doesn't stop even if I log out and close the tab. I have to quit the browser to lose the connections.
I had a thread URL... that initially was about this issue but I didn't know it seemed to be totally Gmail related so I thought I might ask this way. It could be Google just changed something on their end but I don't want to run my mail until I know it's ok.
View 9 Replies
View Related
Jun 23, 2011
just curious, this might not be possible, but is there any way with ajax to open an ftp connection, download a file and then turn around and POST it to a web server? the reason i ask is because i'm writing a script on a shared hosting plan that doesn't give me permission to directly talk outbound on the ftp port but i need to synchronize a file from a csv on an ftp server, this means i have to do the process manually, is there any way i can just click the button and let my browser do the work?
View 4 Replies
View Related
Nov 25, 2010
I created a local user acount and tested FTP. This allows me to post files to this directory using filezilla. I then created a webftpaccount and set the home directory to /var/www/html. Here are the permission to this directory using ls -l drwxrwsr-x 6 webftpaccount webftpaccount 4096 Nov 23 10:32 htmlhere are the permission on the sub directories
drwxrwsr-x 2 webftpaccount ftp 4096 Nov 14 07:37 myfinanceguard
drwxrwsr-x 2 webftpaccount root 4096 Nov 14 07:37 mylawguard
drwxrwsr-x 2 webftpaccount root 4096 Nov 14 07:36 xpiinc
I can log into the webftpaccount using filezilla client and it lists all the directories.It will not allow me to write a file into the html directory or any of the sub directories.Can someone help me set appropriate permissions on these directories so that I can get this working? I need to get FTP working so I set up dreamwaever FTP tlich and maintain sites.
View 7 Replies
View Related
Aug 24, 2015
I m Using 4.0.0-kali1-amd64 in VMplayer Debian - 64bit my internet works fine with wired and wirless as well i tried to install wcid package and that show me error see below :
I m facing some problem
apt-get install wcid-gtk
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package wcid-gtk
2nd thing is blueooth is enable but not works hcitool scan or btscanner
View 3 Replies
View Related
Aug 9, 2011
I'm trying to install Ruby on Rails on an Ubuntu desktop VM. The network connection works ok but I can't seem to get this to work:
sudo apt-get install ruby1.9.2
I want the latest version of Ruby.
Is this because I haven't enabled some repository or something - I dimly recall having to 'enable universe' before now... but can't remember why or how....
View 3 Replies
View Related
May 25, 2011
I am using Fedora on a system i just installed it on, i just got a new HP monitor and hooked it up, now it won't work. I keep getting AN ERROR: unable to locate 10APIC for GSI 6,13,8,12,1......WHEN THE SYSTEM BOOTS UP.
View 1 Replies
View Related
Sep 30, 2010
Anyway, the issue that I am having is that when running GDB, the program will execute perfectly fine if I allow it to run without breakpoints if I skip stepping through the function using the 'n' command, but it will provide me with the following error if I try to step through it:
35 srand( time(NULL));
(gdb) s
time () at ../sysdeps/unix/sysv/linux/x86_64/time.S:32
32 ../sysdeps/unix/sysv/linux/x86_64/time.S: No such file or directory.
in ../sysdeps/unix/sysv/linux/x86_64/time.S
This happens not just for time() but for every function that would be found in the included libraries.
I included stdlib in the code, and in fact this code works perfectly fine on another system using Ubuntu 10.04 and GDB. The source paths are identical between these two machines as well ( $cdir:$cwd ).
View 4 Replies
View Related
Nov 27, 2010
My system is Dell 4300S with 1.4 GHz Pentium processor, recently upgraded to 1 GB RAM,120 GB WDC1200JB hard drive Sony DRU-720A DVD/RW drive, ATT plugandshare wireless adapter with Atheros AR5001X chip, ATI Rage 128 Pro Ultra TF video card, and Actiontec V90, and 56KFlex modem (Agere System Venus). I attempted to use preupgrade to upgrade from Fedora 12 to 14 using wireless connection. It seems, that upgrade finished successfully, except I am not unable to get to a GDM login. I updated SElinux to selinux-policy-3.9.7-10 and selinux-policy-targeted-3.9.7-10, and touch /.autorelabel overnight, I was able to login using GDM once. And that is all. After I boot, after Ctrl+Alt+F4, I can login to terminal.
[Code].....
View 8 Replies
View Related
Mar 6, 2010
Installing Debian Testing on a new laptop and wanted to test out KDE4 on this laptop.Somehow I am not able to locate the networkmanager for KDE4 or maybe I missed something?
View 3 Replies
View Related
Mar 19, 2011
Cannot install updates. Click on icon which says 65 updates available but update manager opens and is blank and frozen .Reboot and same results. apt-get install updates says Unable to locate package updates. Everything has worked perfectly upto now I am running Squeeze.
View 4 Replies
View Related
Dec 16, 2010
After installing Fedora 14, following error messages appear at boot:
Code:
View 6 Replies
View Related
Oct 25, 2010
I just changed (not upgraded, I made a clean install on a new hard drive) from 9.10 to 10.10 and I have a serious problem. I just can't install new packages. Neither apt-get nor synaptic can find any package. I either get a "E: Unable to locate package <package_name>", or "E: Package <package_name> has no installation candidate" For example when I type sudo apt-get install emacs23 , I get this output: Quote:
Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package emacs23 And the synaptics package manager only lists the packages I already have. I searched these forums and googled my error message, but I couldn' t find anything helpful. The only thing I know is that this is not a network/proxy problem, I am behind a proxy but I have set the http/https/ftp_proxy environment variables, and I have a working network connection, as I am actually posting from the same computer.
View 7 Replies
View Related
Dec 27, 2010
I'm trying to install Covergloobus but it says it's not able to find it. It gives me this:
Code:
adrian@adrian-desktop:~$ sudo apt-get install covergloobus
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package covergloobus
View 9 Replies
View Related
Feb 21, 2011
i'm tried to install cacti on ubuntu, but when i enter the Quote:
sudo apt-get install cacti
command. the result is E: Unable to locate package.
and i tried in System>administrstion>synaptic package manager. i tried to reload the result is error..
and it's not just for cacti, i've tried to install the other program the result still the same..
View 3 Replies
View Related
Apr 1, 2011
To start, I am a very new user of ubuntu, so please bear with me. I just installed ubuntu on an old desktop and cannot get it to install packages. I installed these same packages on my laptop that is a little newer and it works on the laptop, but it wont work on the desktop. I searched for previous threads and found to try
Code:
I also tried this many times and nothing has changed
Code:
View 9 Replies
View Related
Apr 16, 2011
when ever I use the terminal to install a program (for example Ubuntu-tweak) I end up with this line E: Unable to locate package (then the program name),this has also happened when I've updated through the terminal. (I've since installed Ubuntu-tweak via the link on its site).Let me say this my little box has a banging Internet connection. And I have a full almost brand new installation maverick meerkat.
View 2 Replies
View Related
Jun 25, 2011
I just reinstalled Xubuntu 11.04, and I'd like to install fluxbox:
Code:
09061920@system:~$ sudo apt-get install fluxbox
[sudo] password for 09061920:
Reading package lists... Done
Building dependency tree
[Code].....
in /etc/apt/sources.list, but I'm on a very slow connection so I don't want to update 42 MB right now (trust me when I say I'm on a very slow connection ).
how to update just the updates necessary for apt-get without having to update the 42 MB of, for the moment, pointless updates?
View 2 Replies
View Related
Jul 21, 2011
I'm running Ubuntu 10.10 and trying to install CUDA. Everything is working fine except it looks like some openGL components are missing; when compiling the CUDA code samples I get the error
/usr/bin/ld: cannot find -lGL I went online and it looked like 'sudo apt-get install nvidia-glx-new'
would take care of this but then I get the error from the title of this post, that it can't be found. I'm afraid I'm a poor hand at installing components with Linux .
S
View 1 Replies
View Related
Jan 30, 2011
I have the ndiswrapper util installed on my computer, however, I have been unable to install the corresponding driver from the provided cd. I have a WNA 1100 wireless adapter. I have not been able to locate a mountable .inf file on the cd. Only a "setupt.exe" or a trans.tbl file.
View 2 Replies
View Related
Nov 16, 2010
As the system boots up, these messages show up:
View 2 Replies
View Related
