I have service runing on linux machine with external IP given by my ISP, but for privacy reasons i need to hide that IP (from RIPE, other WHOIS requests) by another IP before giving users to connect. Only one port. No big bandwith, only as much as possible low latency. Any ideas what to do or what to order?
View 3 RepliesI have a few external IP's assigned to me by my ISP. I have IPcop as my router/firewall. I am wondering how to bind 1 of my external ip's to my internal ip address. So I do not have to port forward, etc. For Example, 77.77.77.77 to 192.168.1.123 and on the server it see's the external IP address.
View 2 Replies View RelatedSo I have an sshd server running.I have no problems getting to my sshd inside my house.I can use:
Code:
$ ssh 127.0.0.1
loginname@127.0.0.1's password:
[code]....
I couldn't find an answer to this question (not including vpn) on different threads so decided to eventually post it, though it's probably easy one. I would like to connect to some application on known IP and port in the internet from my LAN computer. However to do so (I have some application, not any administrative constraints or not being allowed to) I would like to use local addresses. So, let's say - I want to connect to the external host VV.XX.YY.ZZ, port AA using 192.168.EE.FF port BB. Baically so far I have limitation in my application (too many places for possible error, to correct it right now - will change it in future). Is it possible that after my application sends request to 192.168.1.EE port BB, my Linux transparently translates it to VV.XX.YY.ZZ:AA? I tried iptables tutorials and some forums, but nothing seems to be addressing this issue. I don't know if it's event possible with iptables but am pretty sure this should be possible.
View 5 Replies View RelatedI am putting together a Conky config file by a sort of 'smash and grab' approach borrowing things from various configs I've seen around the web that do stuff I like. I have reached a stumbling block as I want to display my external IP, I have used
Code:
${addrs eth0}
to display the IP on my LAN and guessed I would just need to substitute 'eth0' with something else to get the external IP?? I have tried the mac address of my primary router to no avail, this just displays '0.0.0.0' My current config looks like:-
Code:
# set to yes if you want Conky to be forked in the background
background yes
#font
use_xft yes
[code]....
My wife takes her laptop on her travels but recently has been getting a connection refused when attempting to connect to our home server. The only reason I believe this is occurring is because of iptables blocking certain IP addresses which I don't want to delete for SPAM prevention.
What configuration what be both secure and relatively straight forward. Initially configured mac filtering but then realised this would not be appropriate under these circumstances..
Also there is no specific logging in either postfix or dovecot about connection refused.
Currently my OS is Ubuntu 9.04 Jaunty Jackalope Desktop OS and my web server is Apache2. I have a public address 60.x.y.z and my pc local address is 10.x.y.z. I have a web app in my Apache2 which currently run in localhost(10.x.y.z).
I would like to enable the web app so that it could be browse from outside. I know there maybe some port forwarding process and some commands involved in order to do that. But I have no idea on the steps to do that.
I am working on implementing a protocol on NS2.34 .I really need help to solve this problem . Actually , I don't now whether the problem is generated by the tcl code or the c++ code when I run the simulation, I get this result :
Code:
num_nodes is set 64
INITIALIZE THE LIST xListHead
34
45
channel.cc:sendUp - Calc highestAntennaZ_ and distCST_
highestAntennaZ_ = 1.5, distCST_ = 550.0
SORTING LISTS ...DONE!
code....
Consider the following program:
Code:
#include <stdio.h>
#include <stdint.h>
[code]...
Version 10.04 LTS. Installed desktop version and network worked but I needed a static IP address and the install configures for a DHCP configured address. I tried changing to static address using the System->Preferences->Network Connections application but was unable to get the system to come up with the network up.
So I manually modified the /etc/network/interfaces and the /etc/resolv.conf files. I restart the system but when I do an ifconfig, I don't see a configured IP address on eth0 (only the loopback address). If I run /sbin/ifup eth0 everything then works fine and ifconfig shows the correct address bound to eth0.
My files are as follows:
I'm running Ubuntu 10.10 and I'm having problems trying to assign it a static IP address. No matter what I put in the Preferences->Networking area (identifying the interface as Manual)... it still will query DHCP for an address if I run the dhclient command. I'm using to using ubuntu server where I just set the IP in the interfaces config file.
View 1 Replies View RelatedI am running my own Postfix mail server. Some time ago I noticed that most email was rejected because of the server's dynamic IP address. So I got a fixed IP address. However then I noticed that some mails got rejected due to failing the reverse DNS check. So my ISP told me to get a range of IP addresses and they could then create a PTR record for one of those addresses. That is now running but it turns out that the IP address used for the PTR record is a ... dynamic IP address. So Spamhaus PBL rejects my emails again.
View 1 Replies View RelatedMy ISP blocks outgoing email if it does not login properly with a valid account. I successfully configured sendmail to use SMART_HOST and confAUTH_OPTIONS with confAUTH_MECHANISM set to LOGIN PLAIN.
It successfully sends email because I tested it with evolution sending through 127.0.0.1, but I need to specify myacount@mydomain.com as the email address for root.
But it doesn't work for logwatch because it sends as from root@localhost.localdomain, and my ISP's smtp server rejects it. The message I get back in root@localhost account is the following:
----- Transcript of session follows -----
... while talking to smtp.mydomain.com.:
>>> MAIL From:<root@localhost.localdomain> SIZE=581 AUTH=<>
<<< 550 5.7.1 Client does not have permissions to send as this sender
554 5.0.0 Service unavailable
I thought that I should masquerade all emails from this domain, so I configured sendmail as specified in [1] section "24.3.1.4. Masquerading", but it doesn't work. It seems that masquerading in sendmail is broken or something is wrong in the documentation.
[1] [URL]
I have sendmail 8.13.8-2 and centos-release-5-4.el5.centos.1.
Is there a way to specify the "From:myacount@mydomain.com" in logwatch ? or Is there a way to make it work the masquerading in sendmail so I can masquerade everything as coming from a specific account?
I just installed the Ubuntu 9.10 and then installed Oracle 10 Express and all went fine. I can access oracle on 127.0.0.1:8080/apex address however when I try to access the server on it's external ip address (192.168.1.14) even when I'm on my Ubuntu machine it's failing. I'm new to Linux so I'm sure this should be silly and simple issue but I can't find a way around it. I need this so I can access the oracle server from outside world (other nodes on the network).
View 1 Replies View RelatedIn my job I use some ethernet embedded devices. They take an ip address from dhcp server or auto ip. I only know mac address.How can I obtain ip from mac address? In other words I need a rarp packet generator.
View 6 Replies View RelatedI dont know for what reason, since 2 days, I started having this message whenever I try to start httpd.I commented "Listen 443", restarted httpd started correctly. I needed to comment "listen 443" in order to be able to start httpdWhat is strange is when I do
Code:
telnet mylinux 443
it responds
[code]...
how to assign a address to my ethernet card all the options available
View 1 Replies View RelatedI have a dedicated control computer that can only be accessed with web-browser (with its ip-address). My DHCP-server gives a static ip-address to the control computer (base on its mac-address). Somehow and after some time the control computer looses its ip-address (can't ping to it any more) ... and then I have to reset the control computer to get it to pick up the ip-address ... this is not a good solution since the control computer is not nearby. is there a way to force the control computer to renew its ip-address based on its mac-address
View 1 Replies View RelatedMy security software has picked up multiple port scanning detections on my router/network and only the IP addresses are available. Is it possible to find out what the remote mac address is to see if the IP source has been spoofed? I've got a couple of different IP sources which were found scanning my ports.
I don't know if my IP and the remote IP address are on the same network or subnet for that matter which is the reason for my wanting to know what the mac address is to find out if its coming from the same remote machine.
We're using both SuSe and RHEL servers. Our servers are running behind firewall device and remote root login is disabled in SSH.
We're using NAT.
Remote client connections including failed logins are logged into the /var/log/messages but what is logged are gateway ip of our LAN - the LAN IP of Firewall device.
How can I logged the external or public IP of the remote client?
how to get the mac address from given ip address
View 3 Replies View Relatedi know exactly what i need to do, im just not familiar enough with command line to do it properly.i have 7 computers.the first 4 are connected to a router via wireless at one end of the house. of the last 3 only 1 will be able to access the router via wireless, so it needs to share it's one wireless connection via ethernet. this computer i'm going to call 'server'server will have two IP'swlan0 192.168.1.6 this connects to the router that has internet access.eth0 i intend to have the following settingsip:192.168.0.1sub: 255.255.0eth0 will connect to a second router, where the cat5 cable goes from the server, into the internet port of the router where i will define the router's static IP:IP: 192.168.0.100sub: 255.255.255.0gateway 192.168.0.1i have then set the router IP for LAN handling as 192.168.27.1 and all ethernet connections will have a 192.168.27.x IP.
so i need to know how to, without a gui application, use the terminal to assign server eth0 a proper IP address, and tell the server to take the connection it has and share it through eth0 to supply internet for the last 2 computers via ethernet.i had it set up in this way with a windows machine being the one that had the wifi access, but i'd rather have it setup for the ubuntu server to do this task. security is imperative for these 3 remaining machines, so just getting 2 more wifi adapters for a connection to the initial router isn't an option.the 2 that connect to server do so through SSH and though server IS connected via wireless it only makes outward connections through
I have one router, a linksys. It allows wireless and wired connections, as is normal. I have two XP machinesby wire to the router and three linux machines connected wirelessly. The XP machines both have IP addresses beginning with 192.168. while my three linux machines have IP addresses that all begin with 172. None of the machines is connected with a static IP address. All are automatic DHCP.I am told that the above scenario makes no sense. However, such is what I have so, I trust, the theory and the fact do not gel. I would not care except that I cannot see - using the nautilus network servers program, all of the XP computers with some of my linux boxes.
View 9 Replies View RelatedI installed a copy of Kubuntu on my desktop at work yesterday & I was able to connect to the Internet just fine then but today when I came in I can not get an IP address, from what I can tell. ifconfig just lists the following. eth0 Link encap:Ethernet HWaddr 00:08:74:bc:b0:59 inet6 addr: fe80::208:74ff:febc:b059/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:278 errors:0 Dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:17792 (17.7 KB) TX bytes:3952 (3.9 KB) Interrupt:17
View 8 Replies View RelatedIm an academic (university networks and security lecturer) studying/teaching network and operating system security, and inspired by the work of Hovav Shacham set about testing ASLR on linux. Principley I did this by performing a brute force buffer overflow attack on Fedora 10 and Ubuntu 9. I did this by writting a little concurrent server daemon which accidently on purpose didnt do bounds checking.
I then wrote a client to send it a malicious string brute forcing guessed addresses which caused a return-to-libc to the function usleep with a parameter of 16m causing a delay of 16 seconds as laid out in [URL] Once I hit the delay I new I had found the function and could calculate delta_mmap allowing me to create a standard chained ret-to-libc attack. All of that works fine. However .... To complete my understanding I am trying establish where I can find the standard base address for ubuntu 9 (and other distros) for the following, taken from Shacham:-
Quote:
[code]....
/proc/uid/maps gives me some information but not the base address ldd also gives me the randomised starting address for sections in the user address space but neither gives me the base address. Intrestingly ... when a run ldd with aslr on for over (about) 100 times and checked the start point of libc I determined that the last 3 (least significant) hex digits were always 0's and the fist 4 (most significant) where between 0xB7D7 and 0xB7F9. To me this indicated that bits 22-31 were fixed and bits 12-21 were randomized with bits 11-0 fixed. Although even that doesnt define the boundaries observed correctly.
Note: I am replicating the attack to provide signatures to detect it using IDS, and for teaching purposes. I am NOT a hacker and if needed to could reply from my .ac.uk email address as verification.
I want to pass ip address,port address and some parameters from command line using python script.The ip address and port address for establishing socket connection and remaining parameters to execute different connection.
View 1 Replies View Relatedif i attach a shared memory to my process whch part of the address space it will add(like stack, heap, data, code...).
View 3 Replies View Relatedi want to get IP Address of users behind NAT..(192.x.x.x)is it possible?the topology:wireless AP using NAT (192.x.x.x) => Local Area Network (172.x.x.x) => Internet
View 2 Replies View RelatedI just installed ubuntu 10.10 on my laptop Dell Inspiron 1525. Wireless internet is not working. I installed wicd network manager and I am able to see the available wireless networks. My wireless connection is encrypted. I have tried all encrypted options with the key but no avail. It says "Cannot obtain an IP address" after validating authentication.
View 4 Replies View RelatedI have a 2 node Oracle cluster running on RHEL 5.4. One server went down the other day, and then restarted. Virtual IP address switched to the other node as it should, but did not switch back where the failed node came up - problem is the ip address is still on node 2, but I cannot see it or down the interface as it does not show up with ifconfig -a. I would expect to see it on eth0:2 but only eth0:1 is showing up with the correct vip for the node. ifconfig -a on node 1 shows n vip configured. I can telnet to this ip address and login, so know it is still on node 2, so why can't ifconfig -a show it, which interface is it on, and how do I remove it so I can get it back on node 1
View 1 Replies View Related