Is there an utility out there which allows to check LBA(Logical block addressing) addresses mappings to user data? Or for example how to view the LBA addresses under certain partition? Is this possible at all?
View 2 RepliesSo I opened a terminal and fired up netcat.I only wanted to view the Foreign Ip Addresses so I used
Code:
netstat --tcp --numeric | cut -c 45-65
and that gave me[code]...
There are two things that I am trying to accomplish here. The first is that I would like to "cut" the first three horizontal lines so that the output is only ip addresses.I tried tail but the number of different IPs changes so it still gives me those top lines. I tried head but that doesn't seem to give me any output at all.The second thing I would like to do is to filter out duplicate values. For example the output above has 2 duplicate entries of 66.102.7.101:80
cpuid utility is not compiled with U9.04 and the utility is not available as a package with synaptic -
other distributions have it available as rpm . url
Any way to run this utility in the Debian world?
I have been working in macromedia dreamviewer for editing html and php files, Just now I moved to linux system by installing xampp , my question is that I need a best html and php editor that supports both the design view and code view as like in dreamviewer.
View 7 Replies View RelatedDoes anyone know a good program to log ip addresses when visited or connecting to your machine? Something like tcpdump but for ip addresses, I forgot what its called.
View 3 Replies View RelatedIs it possible to configure two IP addresses using one NIC? I'm implementing a VPN server on network 192.168.1.0, ultimately to be accessed over the Internet and through an ADSL router with port-forwarding to the server. Right now I'd like to test it on the LAN, but with the VPN client and server both on the 192.168.1.0 network, that test would not be be valid.
If I had a spare NIC I could put the server on both the 192.168.1.0 network and, say, a 10.0.0.0 network, configure the client on 10.0.0.0 and test. Not having a spare NIC, I'm wondering if it is possible to configure the server with two IP addressese NIC.Virtualising hosts are able to do something similar when running guests with NICs in bridged mode. Log files show they switch eth0 into promiscuouse.In case it matters the server OS is Slackware 13.0.
Can I set 2 addresses for the *1* Ethernet card that I have on my motherboard? How would this scenario work?
View 5 Replies View RelatedI've used two internet services to show me my IP address, and I get different results:1. Whatsmyip.org : ***.**.109.***2. ipchicken.com : ***.**.111.***All the * numbers are same, except 109 and 111. (or link me to explanation) of which one's which?
View 8 Replies View RelatedHow can I get two ip addresses to communicate with each other which are not in the same 255 range?
Like:
192.168.0.1
and
192.168.1.1
My machine has ONE ethernet card and is on a LAN.IP address is assigned to hosts using DHCP.I can have more than one MAC address on LAN by running Virtual Machine and setting network to bridged. This way, my virtual machine simply acts like there is one more machine in the network.Running VMWare for this job is a a bit heavy on resources. Is there a way so that I can I can have 2 or more ip addresses with different MAC address on the same machine without having to run VirtualBox.
By googling, I think its related to bridging and tap. And, I am sure thatts NOT IP-ALIASING because in ip-aliasing both the ip addresses have the same MAC address.Basically, I want my system to have interfaces like:-eth0 - which was originally presentlo- thats always present :|newint0 - New interface with new MAC address and IP addresses which can access my LAN directly. Its like if I bind, let us suppose curl to this interface, its like a different connection
Acoording to this manual:[URL]there are two installation methods:* Burned: boot from a LiveCD and then use the 'Install to USB' utility.(NOTE: Which LiveCD in particular ... and is it going to install a Debian distro ? We're in the Debian wiki... soit's confusing I think -- OlivierBerger)* Unburned: download the ISO file and copy its contents into the USB pendrive.
View 2 Replies View RelatedAnyone having any idea of any utility or code in linux which is able to trace the ip addressof the user who have just viewed my webpage.
View 1 Replies View RelatedWhat are the functions of the tar utility?
View 9 Replies View RelatedI know the subject of this sounds pretty stupid, but I was trying to follow some instructions to upgrade from CentOS 4.8 to CentOS 5.5 and somewhere along the line I messed up the rpm utility and now I get the following:
RPM: error while loading shared libraries: librpm-4.4.so: cannot open shared object file: No such file or directory
I need to install the rpm-libs package but my rpm utility doesn't work so I don't know what to do?
I can't seem to find the cu utility in CentOS. I would like to use it to connect to a USB serial port.
View 2 Replies View RelatedI have connected my computer to network. Computers in network have dynamic ip address which is assigned by ADSL modem's DHCP. Besides this I want to have static IP address for same NIC. So is it possible to have both static and dynamic IP address for single NIC? If so how can I assign it using command and also in GUI?
View 7 Replies View RelatedCode:PING 192.168.1.1 (192.168.1.1) 56(84) bytes of dataFrom 192.168.1.105: icmp_seq=2 Destination Host Unreachabel The IP address we seem to be pinging from is the IP for our wired ethernet connection, and since we're attempting to connect to a wireless network, we think our inability to connect may be due to this issue.Already installed the appropriate firmware updates, because at first it couldn't find any networks at all and now it knows the whole neighborhood, so as far as we know, we took care of that issue by updating firmware.We run the connection stuff in YaST and it all seems to work but it just won't connect to the wireless network.
View 1 Replies View RelatedI have a Dell Inspiron 1545 with Ubuntu Karmic that was working like a charm until last week.When I'm using my college's wireless I can browse just fine, but when I'm in my home's network the web addresses cannot be resolved.I was suspecting of DNS error, but it's the same DNS address in all the other computers, and the whole network is working just fine.The thing is that if I use the IPs, for instance 64.233.163.104 for Google, it works fine, both pinging and browsing. So the problem is in resolving the addresses...
View 9 Replies View RelatedAfter reinstalling with Kubuntu 10.04 my e-mail addresses stored in Kontact don't show up in the list of e-mail addresses when choosing addresses in a new e-mail. When I open my addressbook I can see all addresses.
View 2 Replies View RelatedI am having an issue on my server where I can't access certain ip's erratically. These addresses could previously connect to us.I think it may be related to getting rootkitted. I know the risks in not reinstalling but we are not able to install yet at this point. I cleaned out shv4 and shv5 from the os and setup tripwire. The client can't ping the server and likewise back.From my personal computer they both respond to pings.The server is running denyhosts but that is about it in-terms of security.I can't find anyhting anywhere... No ipchains present, nothing in host.deny, subnet is 255.255.255.0.I'm really at a loss so I'm looking for some direction
I know someone is going to tell me that I have to assume all my files are compromised and i should reinstall; I did md5 checks on alot of files and there is no data on here that shouldnt get out and I check for stuff running that shouldn't be daily.The server is 10.04 server. Latest updates.Here is a list of installed packages
Code:
adduserinstall
anacroninstall
[code]...
I am running a dual boot PC, Ubuntu 10.10 & Win7. I do sticky static IPs on my local network, but it doesn't work cause the Ethernet adapter gets a different MAC address in Windows 7 (EF:9F:E9:F7:F7:F7) than it shows for Ubuntu 10.10 (00:13:74:00:5C:3. I am not sure if this is a Windows problem or something up with Ubuntu. The card is an on-board Atheros L2 fast Ethernet adapter. I have tried updating the drivers in Windows & nothing is working.
View 8 Replies View Relatedpossible to use a gpg key registered on a different email account than the account I have linked to evolution. As is now, I have entered the key id into evolution, but it does not decrypt my mails. It does not even ask for a password.simply opens the message and displays a page of code.
View 2 Replies View Relatedhave a file (called it A) contains;
hostname 192.168.23.65
hostname 10.18.13.253
hostname 10.18.16.253
hostname 177.23.56.58
how can i write a script to get only ip addresses & send it to 3 files with the following info. only:
file1:
192.168.0.0
file2:
10.18.0.0
file3:
177.23.0.0
by creating the 3 files then i will be able to set up subnetmask, gw,....etc.
The command cat /proc/PID/maps shows the memory map (virtual addresses) of the process. How these address are actually mapped?
View 3 Replies View RelatedI have my email on a separate partition so that my email doesn't get destroyed when I do new linux installs (I have emails from 5 years ago now). I also keep my sylpheed email addressbooks. This partition is writable by anybody and I have also made my user the owner of this partition during each linux install (media/email). When I set up sylpheed I tell it that my email is in /media/email and then it is able to write incoming messages to that location. The problem I am having is that I make symbolic links for my addressbooks from ~/.sylpheed* to /media/email using this:cd ~/.sylpheed*rm addrbook-000001.xmlln -s /media/email/addrbook-000001.xml addrbook-000001.xmlSylpheed finds my addressbook ok on my email partition but changes that symbolic link to a file on ~ when it writes new addresses. What am I doing wrong...I want it to write new addresses to my email partition?
View 4 Replies View RelatedI would like to know if a rule has been applied to the iptables.active file to accept direct connections on port 22 through an IP address, can I also add a mac address/addresses to the rules such that if I am not on the network with the accepting IP address, that my MAC address will still get me in?
View 4 Replies View RelatedI would like have a password for accessing my web site which works fine. I also want for the specific site to allow access only for a specific range of ips. Right now the following config should forbid my access, as my ip is different from 200.200.200.*
View 6 Replies View RelatedI am looking for a command which, when typed from the command line, returns the ip-addresses of the DNS nameservers that my ISP is using.I think is should be technically possible to write a program that does this, because linux installers set up /etc/resolv.conf correctly (as does knoppix). But I've been unable to find a command that does it. Is there one, and if so, what is it called?
View 14 Replies View RelatedI do not currently fully understand relationship between binary numbers and ip addresses and subnet addresses; nor am I asking for an explanation here at LQ, when there are plenty at wikipedia and other places...
Even after reading the wikipedia article on it, I still don't grasp it completely, so I was hoping that someone who grasps it in its entirety could answer a simple question.
How can I express the range of ip addresses from 172.22.22.200 - 172.22.22.230 ?
I was trying to make a rule for iptables that only did nat on that specific range of ips, and when i tried used the "-s" flag followed by 172.22.22.200/11 it always changes to 172.0.0.0/11 in the actual rule that is created and displayed by iptables -t nat -L.
I already have many hosts defined on my network, and rather than going through each one and changing its ipaddress to 172.0.0.#, I was hoping to learn a way to represent them in the iptables rule.
I am using DHCP on my home network. There could be as many as 5 computers logged in at any given time. Their IP addresses change depending on the sequence they log in.I want to be able to connect to them from any of them (some wired, some wireless) and share files by issuing a mount command for the appropriate shared drive.My question is how to get the IP of each computer when I only know the names of the computers. Pinging the computer name succeeds, but it does not give the IP.In other words I am looking for a Linux command that will come back with a list of IP's with their corresponding computer names so I can issue the right mount command. I would like to issue this command from a Linux terminal, but would also be happy to issue it from a Windows XP station.
View 14 Replies View Related