Northbridge need drivers in Debian? In Windows I use to install Northbridge, because in the cd with drivers I have the drivers.It is need to install the driver for Northbridge in Debian or it is lemeted to kernel's support?
View 8 Replies
Getting the following errors on a new server:
They appear randomly while the system is idle and in use. The system configuration is as follows:
Running the latest Centos 5.5plus kernel (b/c we are using XFS)
The errors appear randomly several times a day. Tried removing some memory, but no combination sees to cause the error to stop.
I see this error posted in many places all over the web - some claim faulty Ram, faulty CPU, faulty mobo, and kernel bug.
Has anyone seen this error and been able to nail it down?
I have a 'Rackable Systems' server with an HDAMA mobo - Dual CPU Opteron 250 2.4GHz with 2x memory modules per CPU. It seems to run fine, but it hangs every hour or so! I am running Ubuntu 64-bot 10.10, which is currently a beta release so I haven't discounted that as the problem yet, but suspect it unlikely. However, I am downloading 10.04 as I type...dmesg spits out lots of awful messages like these:
[ 1314.920127] EDAC MC1: CE - no information available: amd64_edacError Overflow
[ 1315.920047] Northbridge Error, node 0, core: 0
[ 1315.920060] ECC/ChipKill ECC error.
[ 1315.920066] EDAC amd64 MC0: CE ERROR_ADDRESS= 0x1484410
[ 1315.920082] EDAC MC0: CE page 0x1484, offset 0x410, grain 0, syndrome 0x11c1, row 0, channel 0, label "": amd64_edac
(there are variations on the node, core, address, offset an syndrome etc.)I have tried swapping CPUs over and running with only CPU.I have also swapped all the memory around in almost every permutation.Another worrying symptom is that when I run memtest86+ from a boot disk, it shows zero errors up until the point where the server turns itself off without warning - it hasn't yet completed the test...
I noticed that i cant get many games to run in debian squeeze. I get errors that are prob driver related. I searched the net and found info that suggest im right.
Question: is there a gui anywhere that will do an auto install of the drivers i need for my vid card in linux? I am learning but OMG i dont want to screw this up. ive already had to dump this OS once because i made a mistake.
I cannot get an install past looking for CD on any of the iso's I've tried. I have burned many iso's of other distributions onto a USB Stick and installed them so easily. Yet when it comes to Debian it is always a no go with me.
I think that Debian being up with the times would or should know most people that burn iso's just use an USB Stick it is easier and convenient. Therefore, they'd write the scripts to use them too without the "iso" thinking it is an CD/DVD that it is needing CD / DVD drivers to finish an install else abort.
I installed Debian 8 on my new computer 3 days ago. Everything went fine, until I tried to install the nvidia non free drivers version 352.21 (for a GTX 970M).I read a lot about that, figuring out I had to add the experimental repo. Here's my sources.list for reference :
Code: Select all# deb cdrom:[Debian GNU/Linux 8.1.0 _Jessie_ - Official amd64 DVD Binary-1 20150606-14:19]/ jessie contrib main
# deb cdrom:[Debian GNU/Linux 8.1.0 _Jessie_ - Official amd64 DVD Binary-1 20150606-14:19]/ jessie main contrib
deb http://ftp.fr.debian.org/debian/ jessie main non-free contrib
deb-src http://ftp.fr.debian.org/debian/ jessie main non-free contrib
[code]....
E: Unable to correct problems, you have held broken packages."but it is not going to be installed" ?I searched on various search engine for this issue with no revelant result..
I have two monitors, a primary crt which I usually run at 100-160hz depending on the resolution, and a secondary lcd which I run at 144hz. I can't set either to anything above 60hz or any respectable resolution.
I'm running debian 8 with gnome. Apparently I can't use propietary drivers with gnome because it isn't supported and I have to use the open source ones. So I used this website as a guide to install drivers: [URL] ....
I tried:
1. Code: Select all# Debian 8 "Jessie"
deb http://http.debian.net/debian/ jessie main contrib non-free
Which gave me nothing. First line didn't do anything at all, second one didn't work because 'deb' isn't a valid command.
2. Code: Select all# apt-get update
Worked as per usual.
3. Code: Select all# apt-get install firmware-linux-nonfree libgl1-mesa-dri xserver-xorg-video-ati
Only one installed, and that was xserver.The other ones failed (werent found or something?). Anyway as per instructions i rebooted and ofcourse nothing happened. I am pretty sure since step 1 was probably meant to add to the repository, step 3 wasnt able to complete.
But my concerns are...
1. How am I meant to do step 1 if it isn't a real command
2. Should I (or can I) change to something other than gnome, because I don't think its worth missing out on propietary drivers just to use gnome.
My card is a hd7970.
I am looking for a Debian based distribution of Linux to use on my EEEPC901. I am wondering which would be the best? I'm not a very advanced Linux user, when I had Linux on my own computer it was some version of Ubuntu; however I have used Red Hat and SuSE extensively in the past(though this was quite some time ago now). I have Windows XP on the primary drive, while the stuff I do mostly requires it, it's also slow and unstable and doesn't work well with SS drives. I am heavily considering using Linux for casual use and XP when I need to use Windows software. I bought an 8 Gig SD card(one of the faster ones) for the purpose of this. The SS drives in the EEEPC aren't very good so I don't think it'll be a huge performance difference.
I'm also wondering if it's possible that I could also use this on my bigger laptop; like have some way of swapping the drivers etc. when I plug in, if I put it on an SD card. Though that sounds a bit unrealistic. Also; is it possible to get drivers for an M-Audio MobilePre?
My debian system does not have any wifi drivers unfortunately. I suspect highly that the driver is not in the 3.2 kernel so ideally I'd like to update to a newer kernel.. However, the laptop doesn't have a network port and I don't have a network to usb cable. So in other words: updating the kernel offline using a usb stick..
View 2 Replies View RelatedWhen I tried to rescue an old laptop that kept crashing (turned out to be HDD failure), a problem with the graphics quickly revealed itself. A graphical install was already impossible, and it looked like the image was starting halfway and wrapping around the screen, together with all kinds of artefacts. It's hard to describe, but impossible to work with. I did notice that all was okay when I booted into GParted live in the safe graphics mode (vga=normal).By the way, the system specs: AMD Turion64, NVidia 7150M.
When I had succesfully installed Debian using the normal non-graphical installer, the same effects showed up as soon as Nouveau was loaded, so I SSH'd into it to uninstall them and install the proprietary NVidia drivers. After purging nouveau and rebooting, the effects were gone! It clearly was a Nouveau issue. However, after I installed NVidia drivers successfully (X also started fine), I wanted to change the resolution using nvidia-settings which prompted:
"You do not appear to be using NVIDIA X driver. Please edit you X configuration file (just run nvidia-xconfig as root), and restart the X server."
I would really like to try and do a Netinstall on my laptop with it. I know I could just download the CD's/a DVD, but I would rather customize it for my laptop, and I've heard that's the fastest way. The problem is that I have to compile the drivers for both my wireless and my wired internet. I have guides to compile both the wireless [URL] and wired [URL] internet. I was wondering if there was a way to compile these drivers in a Netinstall (preferably the wireless, but wired if necessary)?
View 5 Replies View RelatedI have some servers... more than 30 (different brands: HP, IBM, Supermicro, Fujitsu, etc).
I wonder if there would be some way (and how to do it) to load the RAID drivers in Debian Live 7.8.0 without installing it?
While trying to solve the problem indicated in another thread [URL] .... I realised that I do not have the file /etc/X11/xorg.conf.
Also, if I enter the command Code: Select allsudo kate I get
Code: Select allcannot connect to X server :0
I tried logging in to another terminal (tty3) and entered
Code: Select allstartx
Kate opened normally with root permissions.
Currently I have a Nvidia card but I am using nouveau drivers.
My question is: installing the Nvidia drivers (following the guide in [URL] .....) would fix these Xorg issues?
I had troubles with nvidia drivers in other distros....
I have tried doing some research on the correct method of installing drivers and getting compiz to work. I have recently switched from ubuntu to debian. The thing I loved about ubuntu, was what compiz could do. Where to Get the correct drivers or instructions and all set up so that I may use CCSM and have a sweet desktop cube again?
View 4 Replies View RelatedI looking for a new disto been using ubuntu. my friend recommended Debian, I just installed it and made it unusable very quickly by trying to use repositories for ubuntu. I'd like to know if there is an easy way to make my wireless work like in ubuntu it just does, (i don't even need to attach a cat 5 cable after install), and I'm happy in my blissful ignorance. Also an easy way to install nvidia drivers?
I need Broadcom and nivida 173 drivers. I looked through the Debian forums while I had a working system but found nothing easily and iceweavel was so slow, unless there was something wrong with my wired connection. Is there an easy way to install no free drivers?
yet another recent Ex-Windows user hear. Been playing with and studying Linux for a few months now. I would like to install Sqeeze on my Acer Aspire One D250.The question I have concerns needed drivers. Do I need to download every .tar or .zip, or is the current folder all I need?
View 8 Replies View RelatedAre USB WiFi adapters more likely to work in Linux than other WiFi adpaters like PCI cards etc?Im just wondering if they can use a generic USB class driver rather than having to have one for the specific chip set?
View 1 Replies View RelatedI recently installed fglrx proprietary drivers. Upon reboot, gnome stopped working - the classical "something has gone horribly wrong" message showed up. Surprised, i switched to KDE plasma display manager, and it worked flawlessly.So I opened up Konsole, and typed: gnome-shell --replace.I received this output:
Code: Select all(gnome-shell:3729): GLib-CRITICAL **: g_strsplit: assertion 'string != NULL' failed
(gnome-shell:3729): Clutter-CRITICAL **: Unable to initialize Clutter: The OpenGL version could not be determined
(gnome-shell:3729): mutter-ERROR **: Unable to initialize Clutter.
Trace/breakpoint trap
which led me to think that gnome is not able anymore to detect my display driver. It is however working well: glxgears gives the usual values, and glxinfo does detect the correct driver.I thus searched the web for that error, and the only results that showed up were about changelogs / some obscure things.The xorg.conf seems perfect to me: pointing to the correct drivers, and having the correct values.I am having Debian Jessie with an r9 290x on the proprietary Omega drivers.
A recent update made my intel 830 unusable with kernel modesetting enabled, so I disabled it. However, I get "No kernel modesetting driver detected" errors when I start X with the intel driver. Is there a way to make the intel driver not require KMS?
View 2 Replies View RelatedI recently reinstalled Wheezy on my laptop and after the install was finished I installed the brcmsmac driver, using the instructions on this wiki page: [URL]. I have the device BCM43224. I noticed though that this driver seems worse compared to the proprietary broadcom-sta I had on my previous installation and so I would like to switch. I know that there is a guide on how to install the proprietary drivers on the wiki ( [URL]), but it feels like i should remove the free driver before I install the proprietary one, and I dont know how to do this .
So my question is: what is the proper way of changing from the open brcmsmac driver to the proprietary broadcom-sta driver?
Yesterday I installed Debian "succesfully" (after some problems that were easily solved), but now I need some help with installing drivers and other stuff. I need to install the Conceptronic wireless card (rt61). I followed a guide I found on the Internet, but, when making the installation, Terminal gives me some errors.
make
make[1]: gets in the directory `/usr/src/linux-headers-2.6.32-5-amd64'
Building modules, stage 2.
MODPOST 0 modules
[code]....
Another thing I don't know if I installed correctly are the nVidia drivers. I think I installed them succesfully, because my graphics card is now quiet (when the drivers are not installed, it sounds like a nuke) and I have the nVidia settings installed, but... when I try to modify the resolution in Preferences/Monitor, I see "Unknown monitor" and "50hz refresh rate". My TV suports 75hz and when I installed Debian I had it at 75, but after installing the nVidia drivers, everything gone wrong.
I tried to update the xorg.conf with nVidia-settings, and now it says my monitor is at 75hz and it's a Phillips, but I still see Unknow monitor and 50Hz at Preferences/Monitor. Why does this happens? Also, my integrated sound card doesn't work. When I try to open a MP3 file, It opens correctly, but my speakers don't work. And the last thing is... Compiz doesn't work! Well, nothing about Desktop Effects work. I also don't know where should I set up those Desktop Effects (I know how in Ubuntu, but in Debian...).
As the title says, I have tried both of them and they both freeze my system with no apparent reason. They freeze by just looking at them in the fist few minutes after startup and a hard reboot is needed. So I keep coming back to 11.6. Does anyone else have the same problem or is it just my system? By the way I have an HD 6970 in an AMD CPU based system running squeeze. And the reason why I keep installing new drivers and don't stick with 11.6 is a futile hope that anti-aliasing will work with compiz enabled.
View 10 Replies View RelatedI am trying out Debian 6 and was wondering how I install the Nvidia drivers. In Ubuntu, I just had to launch Hardware Drivers and install the drivers from there. Is Debian a harder distro to use than Ubuntu? Like I said, I am trying it out. I have a tendency to explore the different Linux distros hopefully finding one that is drop dead easy to use and maintain.
View 3 Replies View RelatedI am following the instructions to install my AWU254 on debian4.0 and get the following...
cjtrim@debian:~/src/rtl8185_linux_26.1027.0823.2007$ ./makedrv
./ieee80211/
./ieee80211/ieee80211_module.c
./ieee80211/ieee80211_rx.c
[code]....
I just built myself a new 64bit computer, but I'm having a little trouble getting it going. At first I put windows 7 on it, but it requires 1gb of RAM just to run it's basic programs, and it's all bogged down with all these useless programs, and when I tried to turn off some programs to make it faster, half my stuff stopped working all together, because they required all these programs just to run other programs, it's just absolutely ridiculous.
So I looked into Linux, and after asking around a bit, I installed Debian. It's exactly what I want in an operating system, completely customizable, but I guess I've been spoiled by microsoft and I'm not that good with all the command lines and configuring the kernel.
Righty now I'm trying to get my video card going, but I can't even figure out how to get the drivers installed. I went to amd.com and got the drivers, but when I try to just put them in the bin, but it keeps telling me I don't have administrator priveleges, but I do. Then I tried following this manual wiki.debian.org/Manual-Howto#Atibinarydriver]Manual-Howto - Debian Wiki , but I got stuck at the part where it tells me to copy and edit my xorg.config. When I go to copy, it tells me the directory doesn't exist, but it does. And when I go to edit the xorg.config, it tells me I don't have priveleges again.
So is there any easy way to get my video card installed, or do I really have to create this new kernel and go through this whole long process? My motherboard has hybrid crossfire technology, am I able to use that with debian?
Here is what I have in my comp, in case the info is needed.
Debian Release 5.0.4 (lenny) Kernel Linux 2.6.26-2-amd64 GNOME 2.22.3
MSI KA780G mothboard
2x1gb ddr2 pc2-5300
AMD Athlon II 2.8ghz Quad Core 630
1gb pci-e radeon hd4350
been away from linux for while used to use slackware mostly using debian 6.0 amd 64 I tried using the info from http://wiki.debian.org/ATIProprietary but it doesnt work, dont have deb installed and apt-get install didnt work to install it
View 15 Replies View RelatedWell at the moment i have just installed Debian 5. I've downloaded nvidia-linux-x86-180.29-pkg1.run and i need someone to help me out step by step on how to install this properly.
View 4 Replies View RelatedI would like to display hardware devices and their drivers in Debian. Sth similar to windows 'Device Manager' not necessarily must be in gui version. What kind of cmds I should use to be able to display hardware detected by HAL and their drivers ?
View 3 Replies View RelatedI'm in a bit of a rush so thought I'd ask two questions in one thread here.
1. Will a .deb made for ubuntu likely run into much trouble if I run it on Lenny?
2. Does the nvidia official proprietary driver come by default with a full 5-DVD install of x64 Debian 5.0.4, or do I need to install it myself? If so, is it enabled by default, or do I need to enable it? How?
I'm running Lenny and the nvidia driver is 173.* I need to upgrade to the current nvidia driver but when go to install it I get the message that it was copiled with a different version of gcc and might screw up my kernel. any suggestions to upgrading to the current nvidia driver?
View 6 Replies View Related
