Hardware :: HVR-1600 Unable To Find Channels
Aug 9, 2010
I am running the current Mythdora and using the latest drivers and firmware todate, or at least what is listed on the HVR1600 wiki page. I can't lock on to any channels no matter what with this installation. Shouldn't it work after confirmation of drivers loaded and firmware upadated? Below I have outputed basic information. I did try a previous version of mythdora and it was able to find and lock to channels provided by my cable service, but had a bad driver so I updated everything.
Another person posted that he swaped pci slots with this tuner card and it worked. [URL]I think I am missing something. I also would add I have two coaxial inputs. Analog and Digital. I am currently using the TV one. I also did a cat /dev/video0 > ./Desktop/test.mpg and it was static. Does anyone have some ideas? I am all ears!
[Code]...
View 3 Replies
ADVERTISEMENT
Dec 15, 2010
After a recent update, I suddenly find myself unable to print on my hp Deskjet 1600;
I have the necessary software; the HP management tool is on my panel and I use it.
When I attempt to print now, I get an error that says "hpcups is not installed".
Here is the output of the troubleshooter
Code:
View 1 Replies
View Related
Jun 24, 2010
I've installed RPMforge and Smart Package Manager.
I had to create my own Centos 5.5 channels to sync yum repos and smart channels.
Here's the Centos 5.5 channel file for Smart:
Just shut Smart PM down, copy this file into /etc/smart/channels, and restart smart.
Smart should then detect the new channels (repos) for Centos 5.5
Update your channels in Smart, and you should then have yum repos and smart channels both in sync, looking at the same set of packages.
Copy this to CentOS-Base.channel, and add it to the /etc/smart/channels directory.
# CentOS-Base.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
[Code].....
View 2 Replies
View Related
May 24, 2010
I have installed mythbuntu 10.04 and installed my tv tuner (saa7130). I can play games on composite but cannot scan for tv cannels. how i can scan for channels because he cannot find a single channel (I think this is weird) ?
View 2 Replies
View Related
Oct 21, 2010
I can't get mythtv to play television with my Hauppauge HVR-850 tv card. I was able to view tv in mplayer, so I know that the card is working. The tv signal is broadcast only (no cable). I had to set the card type to DVB DTV capture card (v3.x) to get mythtv-setup to successfully scan. I was able to successfully scan both with a "full scan" and with a channels.conf file that I had generated earlier when tinkering tv in mplayer. Unfortunately, the mythtv frontend failed to play any live tv. It said "Error: MythTV is using all inputs, but there are no active recordings?"
[Code]...
View 1 Replies
View Related
May 21, 2010
when I try to access the #ubuntu channel on [URL] using the default settings within Xchat I receive the following -
* Looking up irc.freenode.net
* Connecting to irc.freenode.net (32.1.20.24) port 6667...
* Connection failed. Error: Connection timed out
I can connect to other servers and channels fine just not this one is there a way to get DockbarX working within Avant Window Navigator 0.4.0?
View 3 Replies
View Related
Sep 18, 2015
I have a Dell 1505E with Debian 3.16.7 which is unable to connect to channels 12 and 13 even after changing wifi regional settings to different countries (using iw reg set).12 and 13 are legal to use in the UK. What should I do?
Code: Select allsudo lspci | grep -i wireless
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
Code: Select alllspci -vv -s 02:00.0
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
Subsystem: AzureWave Device 2047
[code]....
View 0 Replies
View Related
May 1, 2010
I have a new install of Karmic on my system with a flyvideo 3000 tv card installed. My problem is that it doesn't find any radio channels and the input channel is completely wrong. I don't have any sound on gnomeradio and can't find the config files to change the input channel. The only input option available to me is dig1 - can anyone point me in the right direction?
I have already read the Howto for this tv card and changed the device to radio0 in the setup. I have setup tvtime perfectly with sound channel as well as with a 5.1 surround configuration. I am missing my favourite radio channel. and I want to get rid of my windows installations once and for all! Update: I did a system update and some things have changed: the radio tower graphic on gnomeradio is now green (I assume it is getting a signal) but no sound yet.
View 2 Replies
View Related
Oct 17, 2010
I've been trying to set up my HVR-1600 card with MythTV but have run into a road block. As far as I can tell, the card is setup and the drivers are working properly ( cx18 ). The output of lspci shows:
02:06.0 Multimedia video controller: Conexant Systems, Inc. CX23418 Single-Chip MPEG-2 Encoder with Integrated Analog Video/Broadcast Audio Decoder Unfortunately, I don't seem to be able to change channels when my cable is connected using ivtv-tune no matter what channel or frequency table I try (I live in Canada), though the S-video and audio input seem to work fine (but not through MythTV, see below).
Likewise, when I tried to scan for channels in MythTV, nothing is found, though the same cable plugged into a TV gives just regular cable as it should. since I have digital cable and would like to use the S-video anyway (and the IR blaster when I get that far). But I can't seem to get MythTV to recongize the S-video input. These are my backend settings:
Capture Card Setup:
Card type: IVTV MPEG-2 encoder card
Video device: /dev/video0
Probed Info (Hauppauge HVR-1600 [cx18]
Default Input: S-Video 1
[code]....
I'm not sure if perhaps it's a permission error someone since it works as my own user? It seems very strange. So ultimately it seems I have two main issues:
1. Why can't I configure MythTV to use the S-video input?
2. Why does the MythTV user get errors when trying to use the /dev/video0 device with mplayer? (Remember, cat /dev/video0 > recording.mpg works fine as both MythTV user and my user account)
A few other details:
Ubuntu version: 10.04 64-bit
MythTV version: 0.23.0+fixes24158-0ubuntu2 (from the Ubuntu repository)
Nvidia 9400gt video card (with latest nvidia drivers, 195 I believe)
View 3 Replies
View Related
Feb 8, 2010
Does anyone have the Hauppauge HVR-1600 remote control working in Opensuse 11.1 or 11.2? It acts like it's not finding a firmware file or driver. I grabbed a .bin firmware file from one of the Mythtv sites, but I havn't gotten it to work yet. I put it in the /lib/firmware/KERNEL directory, but maybe I need to move it up one directory.Anyway, I was wondering if anyone else has it working and what was done? I have the other things in place regarding lirc, so I think the only thing holding it up is the device file.
View 1 Replies
View Related
May 3, 2010
I am just starting with Opensuse , been on Ubuntu for a few years . I am getting Kaffeine to work with my HVR 1600 . I had to add the firmware to /lib/firmware , then install the xine and ffmpeg files . Now tv scans channels and plays . Actually it plays great . I had skipping problems in Ubuntu with Me-tv , not so with Kaffeine .
View 3 Replies
View Related
Apr 27, 2010
I've followed instructions here upto the point for the Startup Script for Analog Tuner the script provided does not run (v4l2-ctl seems to be depriciated?) In any case the scan for digital channels is not finding anything, I wasn't able to scan for analog channels. When I do something like cat dev/video0 | mplayer All I see is static. I've followed the instructions and I didn't get any obvious error messages. I'm completely lost. I know the tuner works, I've tested in in Windows 7. I've tried connecting the coaxial cable directly to the tuner's TV outlet, to the ATSC outlet, I've tried connecting the set-top box out coax to the TV, and ATSC outlets to no avail.
View 1 Replies
View Related
Dec 19, 2010
After a massive headache, it seems that driver developers have given up on drivers for the Hauppauge HVT-1600 [URL].. In their current state, the drivers can't get proper sound out of the card, and they can't figure it out.
First, does anyone know is this true? Second, can someone recommend what the best supported tuner card for linux is? My main goal is to record video coming over cable in the US. I thought the 1600 was it, but I guess I was wrong. PS, feel free to point me a ta page that has this info. I can't find one that shows card comparisons (or recommendations).
View 5 Replies
View Related
Mar 18, 2010
Whenever I restart my system, the screen resolution has been reset to 1600 x 1200. I change it in "configure desktop" and it's ok for the session but it changes back on reboot. Also, the font sizes are too small for xterms. Sure, I can ctrl+ to increase but why should I have to do this each time I login? I noticed others seem to be having this problem. Is there an upgrade that will fix this? I'm using 11.2 and kde.
View 9 Replies
View Related
Jan 25, 2010
i'm running Ubuntu 9.10 amd64 and installing a Canon Pixima iP 1600. The drivers which tried to automatically install only have Pixima iP 2000.
View 2 Replies
View Related
Jun 8, 2011
I am having an extremely hard time trying to make and install the driver for the Hauppauge 1600. I have Fedora 14-2.6.35.91 kernel. I am a newbie at this kind of installation. I would like to know is there a kernel that I can install that the tv tuner will work right out of the box. This is very frustrating. I try to install the CX18 driver, I receive an error message. I would really like this to work.
View 3 Replies
View Related
Jun 27, 2011
The machine boots, graphics come up, login window shows up, but after login there is only the background window (and mouse). My .xsession looks like this:
[Code]....
View 3 Replies
View Related
Aug 15, 2010
I cannot install Kubuntu (or Unbuntu) 10.4 on my husband's computer. I have spent 5 hours on this and cannot get anywhere. I am deeply frustrated. The iso I burned to CD is good (works on 2 other computers). His computer will not boot from USB, no matter what I do to the drive order in BIOS. After loading the blue screen with the Kubuntu logo on it (and the blue-white dots), the screen changes to black and shows the following text:
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) (initrafs) Unable to find a medium containing a live file system.
He really needs to get rid of WinXP. Kubuntu is what I have on my computer (and love it!). Here is some info about his computer:
OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
[code]....
View 8 Replies
View Related
Apr 28, 2011
I just installed Ubuntu Natty on my desktop which uses an nVidia GeForce 7+ chipset. After installing Ubuntu, I noticed that when the GRUB boot menu should show up, my monitor says "Input signal out of range, change settings to 1600 x 900 - 60Hz", and it stays that way until the Ubuntu desktop shows up. The Ubuntu desktop shows up just fine. It's just that GRUB and Plymouth don't show up and my monitor gives me the aforementioned message.Here's my xorg.conf configuration after I ran the nVidia X Server Settings app:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 270.29 (buildd@allspice) Fri Feb 25 14:42:07 UTC 2011
Section "ServerLayout"
[cdoe]...
View 5 Replies
View Related
Mar 26, 2010
get my GUI Desktop back. I had an amd athlon x2 PC w/ onboard graphics GeForce 6150se and a dual boot between xp and ubuntu 9.10
I added a Haupauge winTV-HVR-1600 to sort of watch tv (even though i totally never watch tv) but when i wanted to go back to ubuntu it boots into command prompt and asks for my username and pass. I think the problem is with X i am not sure though, but since i changed something inside i think X needs to be reconfiged or somethin can some
View 1 Replies
View Related
Feb 4, 2010
I use Kaffeine Version 1.0-pre2 and xine 0.99.6 on Fedora 12 64-bit. If I try to watch HD-channels (such as Das Erste HD, ZDF HD, arte HD), there is no sound (or just a few seconds). I read some times, that setting the audio buffer to 750 and the video buffer to 1000 should solve the problem
View 6 Replies
View Related
Nov 9, 2010
I had a look at No TV in Kaffeine, but I'm lost. I have an HDTV wonder card. I have installed dvb, ffmpeg, w32-codecs, etc. I am able to watch video/hear audio.
I have updated the scan data in kaffeine, adjusted device 1 tab to my area, but when I open the channels window and scan, it just goes through the motions and lists nothing. Here i partial output from:
randolph@linux-jooj:~> scan /usr/share/dvb/atsc/us-NTSC-center-frequencies-8VSB
scanning /usr/share/dvb/atsc/us-NTSC-center-frequencies-8VSB
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
>>> tune to: 57000000:8VSB
WARNING: >>> tuning failed!!!
[Code]....
View 1 Replies
View Related
Mar 25, 2011
KMix 4.6.0 in OpenSUSE 11.4 (x86) doesn't show up channels. It only shows "Internal sound Analog stereo" So I can't set the input/output channels and the headphone channel for my soundcard. The right soundcard drivers are installed (for Creative Sound Blaster Platinum Live Drive). Earlier versions of KMix worked just fine.
[Code]...
View 9 Replies
View Related
Apr 11, 2011
I am setting up a MythTV environment to switch from Windows based MediaPortal (with a high number of disturbing bugs). Yet, I have three difficulties, which I want to discuss with you. They are:
- No audio via HDMI [URL]
- Video resolution seems to change during video playback [URL]
- Channels cannot be found via DVB-S
As you can see, I have created three posts to keep discussions focused.
Alltogether I have the following setup:
- AMD 5050e CPU
- 8 GByte RAM
- Biostar TA890GXE
- Samsung LE40M86BD, connected via HDMI (and only HDMI)
- Mythbuntu 10.10 with proprietary drivers installed
- Technisat Skystar HD2 DVB-S card (two times)
Now, here is the problem:
when I try to scan for any available satellite channels to use in Myth, I cannot find any channels. I have invoked "scan -V -l UNIVERSAL -s 1 -a 0 /usr/share/dvb/dvb-s/Astra-19.2E" with the following result:
Code:
scanning /usr/share/dvb/dvb-s/Astra-19.2E
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 12551500 V 22000000 5
>>> tune to: 12551:v:1:22000
[Code].....
View 2 Replies
View Related
Jun 20, 2011
I have a Yuan/Avermedia MC770 mini PCI hybrid card. When I installed ubuntu 11.04 for the first time it found an update for it automatically which I was quite happy about. I installed Me TV and thought so far it was all going quite well. connected it to a roof top aerial and it wouldn't find any channels what so ever Has ubuntu really found and installed the correct drivers? I tried VLC and Media player no result.
View 3 Replies
View Related
Mar 25, 2011
Only my 'front' sound output is working. No 'rear', 'side', or 'center'. And alsamixer only shows 'Master' 'PCM' & 'Capture' It's the onboard sound on a Asus M4A89TD PRO USB3 motherboard.
Here is my alsa-base.conf;
# autoloader aliases
install sound-slot-0 /sbin/modprobe snd-card-0
install sound-slot-1 /sbin/modprobe snd-card-1
install sound-slot-2 /sbin/modprobe snd-card-2
[Code].....
View 2 Replies
View Related
Mar 16, 2010
Right now I'm trying to get MythTV to bring in my channels. I can see all the channels when I use the Watch TV feature on the frontend, but in the backend I can't get it to work.
In the input COnnections>Television section, I am set up for Schedules Direct. My "Scan for Channels" button is disabled, so I can't use that. However, the "Fetch Channels" button, though enabled does nothing. It doesn't depress when I select it or anything. I can't figure out why. I know my username and password are entered correctly, so I'm drawing a blank.
My video source setup is also set with SD.
I have an Analog V4L capture card selected in the capture cards section. It's a AVI TV Wonder Pro (an old card, but free). It seems to be set up correctly since I can "Watch TV" with it.
In the channel editor, I also do not have the option to do a channel scan. It skips right over that button.
View 1 Replies
View Related
Apr 8, 2010
i installed Ubuntu 9.10 and it seems i can't have 5.1 sound playing, i've searched a lot but i still haven't found a solution to my problem. tried to change the default channels from 2 to 6, as well as the default-channel-map and much more but still nothing works..
View 2 Replies
View Related
Aug 15, 2010
I am trying to configure my Kubuntu desktop since some time to have Mumble working perfectly... It was running in the past, i re-installed some days ago and now i have a huge problem. Basically, capturing the microphone works and it's sent to Mumble, however everybody also hears my desktop sound. I tried adjusting channels in KMix with no luck. Also i don't understand why the capture channels are enabled and must stay at minimum volume...
View 2 Replies
View Related
Aug 16, 2010
I'm running a standard 10.04 install with Gnome, but wanted to try out KDE 4.5 since it just came out. Now I installed KDE through the normal software channels and this installed 4.4.5. The question is how do I now upgrade to 4.5 as it appears 4.5 isn't in the stable ubuntu update channels?
View 2 Replies
View Related
