Hardware :: HP Printer 2605dn Failed When Upgraded From Fedora 9 To 14?
Jun 9, 2011
My network printer HP Color LaserJet 2605dn works fine with Ubuntu, Windows XP, Fedora 9 ... but not with Fedora 14 (2.6.35.12-90.fc14.x86_64). All printouts look like this:
fedora_14_hp_2605dn_printout.jpg
The list of HP printer models on Fedora 9 has "Color LaserJet 2605", and it workes fine.
However on Fedora 14 the model is no longer in the list. I tried "Color LaserJet" and "Color LaserJet 2500" but the printout results were always corrupt.
fedora_14_setup.png
View 3 Replies
ADVERTISEMENT
Jun 2, 2011
I am using Fedora 12 with HP 1020 Laser Jet. Plugged printer in and installed it. Now it doesn't want to print, it gives me a printer state message: /usr/lib/cups/filter/hpcups failed.
I have tried to reinstall hplip but it is the same.
View 2 Replies
View Related
Jul 20, 2009
I have a FC11 box, with an HP prineter attached. I trying to print from my laptops after I have setup samba and shared the printer , It was working fine when I was installing FC4 and FC5. I am not sure what is missing. when I tried to print from the XP box I got "Test pge failed to print" error.
View 9 Replies
View Related
Jan 18, 2010
I'm having a problem trying to set up my HP OfficeJet 6310 printer with Fedora 12. This is with a clean install, SELinux disabled and Seems to be some issue specific to Fedora, as I've used the same setup with the same hardware without problems in other distributions. I have installed all the HP files I believe should be installed. Anyway, my printer is on my wireless network. I can see the printer on the network, as is the case with my other computers.
I followed the standard setup I use with any other distro....open a terminal and enter "hp-setup." The HP Setup utility opens and I go through the standard procedure of choosing /Network/Ethernet" as my means of connecting. Moving on, the HP OfficeJet 6310 is found without a problem. When I attempt to "Add Printer," however, I am then getting an error. The error shows, "Printer Queue Setup Failed. Restart CUPS and try again." Looking at [URL], I get to CUPS but can get nothing there so far as a printer goes.
View 14 Replies
View Related
Jul 26, 2011
I have been trying to add the Canon Pixmar MG5150 printer to my Fedora 13 setup. I downloaded the drivers and installed them but I keep getting an error saying the pstocanonij failed.
View 5 Replies
View Related
Mar 3, 2010
My USB printer stopped working after I upgraded Slackware, using the Current.Also can not install any USB printer. CUPS version 1.4.2.
View 14 Replies
View Related
Mar 27, 2010
Why is it that the darn printer keeps breaking on this thing (Ubuntu) ??? It's either every damn update that keeps messing this up. One computer is bad enough, I can't imagine having to take care of even five with this thing always screwing something up. What the hell is going on??? Yeah I'm tired of this thing always messing up the printer. Please fix this thing, separate the browsers if you have to, do whatever it takes, but please STOP messing up the printers...and I don't even print that often.Oh yeah, when you first start the OS up, the drive seems to go on for a while longer now. I only put the regular updates and don't tweak anything.
View 9 Replies
View Related
Dec 20, 2010
Failed to print to HP printer from Ubuntu 10.10.. i get error - {'printer-state-message': u'/usr/lib/cups/filter/foomatic-rip failed', 'printer-state-reasons': [u'none']}
View 1 Replies
View Related
Oct 12, 2010
I have a Brother MFC-240C inkjet printer & scanner. On installation of Maverick Meerkat v. 10.10, my scanner function failed. I added the same line into the file as for Lucid Lynx v. 10.04 and the scanner has scanned perfectly. The lines Brother gives are for the following file: Ubuntu 9.10, 10.04
1. Open "/lib/udev/rules.d/40-libsane.rules" file.
2. Add the following two lines to the end of the device list. (Before the line "# The following rule will disable ..."):
# Brother scanners
ATTRS{idVendor}=="04f9", ENV{libsane_matched}="yes"
above is found at: [URL]
View 6 Replies
View Related
Dec 26, 2009
I have a problem with a bad entry in my system-config-printer on my notebook computer which I think is interfering with my ability to print. I run fedora 10 on several systems in my house. On one desktop, I have a printer hosted which I think I have successfully setup for wireless network sharing (an HP895) using IPP.My problem seems to be a bad entry in my system-config-printer on my notebook computer which seems to stall when I try to print from applications (Firefox for example.) on the notebook. If I open up "Printing", I have 3 printers listed... one of them is for when the printer is attached directly to the notebook, one of them is the working printer description "printer" and the 3d is the bad entry. If I click on the bad entry to try to delete it, I don't have that option, but If I try to look at the "properties" for that entry, system-config-printer stalls (as do other applications when the printing dialog box starts up, and I have to force them to shut down.)
I will attach some screenshots and a copy of my /etc/cups/printers.conf file.How do I get rid of this "bad entry" in the system-config-printers GUI ? It doesn't seem to exist in the printers.conf file.
View 3 Replies
View Related
Jul 31, 2010
I just installed opensuse 11.3 and was configuring the printer (via http) as usually using the HP Device Manager. But this time I got these error message:Printer queue setup failed. Please restart CUPS and try again
These lines were generated in the error-log of cups:
E [31/Jul/2010:23:30:35 +0200] [cups-driverd] Bad driver information file "/usr/share/cups/drv/sample.drv"!
E [31/Jul/2010:23:30:35 +0200] [cups-driverd] Skipping "/usr/share/ppd": loop detected!
[code]....
View 9 Replies
View Related
Jun 20, 2011
I am probably going to get blasted for this statement which is a result of four days of frustration.There are many people on here who are having problems getting their printers to work with Ubuntu. In my case it is version 10:04. I have been reading and trying fixes for four days. Nothing works.Surely this has got to the attention of the people who know what they are doing and design these programs. I sure don't know how to fix this, along with a lot of other users. We are not being lazy or arrogant. Nothing seems to work.Surely someone in the hierarchy can put in a patch that fixes this problem.The fact that Ubuntu won't print for so many people surely must be a priority inhe development of this software. So, please will one of the program developers fix this problem and send out a patch.
View 8 Replies
View Related
Jan 3, 2011
I've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?
View 7 Replies
View Related
Nov 23, 2009
I just upgrade to Fedora 11.
I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.
The summary is as follow:
I have download a printer driver and had installed but got error when I tried to printer a test page.
View 6 Replies
View Related
Jul 21, 2010
Installed fedora/configued samba, shared printer and i am not able to access shared printer from any of the fedora machine. I am able to access the printer /shared folder from windows machine. I dont know the process of cups installation.
View 1 Replies
View Related
Jun 27, 2010
I have configured the remote installation of Fedora 13 with kickstart with nfs installation method. All work ok until I boot the Fedora 13 client system.
Fed13 client system receives the IP address from dhcp, receives the loader, loads vmlinuz and initrd.img from tftp, load anaconda, configures the network and dev eth0, mounts nfs server to load kickstart file, loads kickstart file (language...) but when it tries to mount nfs server to install from Fedora 13 installation tree it fails.
First, I thought that I had an error on my NFS configuration but I was wrong. I opened tty with ALT+F4 on the Fedora 13 client and I sew this error:
Code:
Is this a bug or can I modify anything to correct this error? How?
View 3 Replies
View Related
Jun 8, 2011
went through the tutorial on FedoraSolved for securing ssh. I installed denyhosts with yum and then tried to run it with the command line command"sudo /etc/init.d/denyhosts start" but I got the message"Job Failed. See system logs and 'systemctl status' for details [FAILED]"and in the application "services" in the applications menu,t shows an exclamation warning and says that "This unit has failed"
View 1 Replies
View Related
Sep 10, 2009
I've read hundreds of threads on this problem but they seem to be intermittent and the resolution has been using a different kernel version.
I'm using the latest kernel but I still have this problem
Running Logical Volume Manager gui and attempting to extend the volume results in the same error.
View 3 Replies
View Related
Jul 6, 2009
I recently ran yum update and upgraded to deluge 1.1.9-1. It worked for a while, but after a reboot all I get is this:
Code:
[swarm32@smithers ~]$ deluged -d -L debug
[INFO ] 00:06:39 daemon:48 Deluge daemon 1.1.9
[DEBUG ] 00:06:39 daemon:49 options: {'loglevel': 'debug', 'quiet': False, 'logfile': None, 'config': None, 'port': None, 'pidfile': None, 'donot': True}
[DEBUG ] 00:06:39 daemon:50 args: []
[DEBUG ] 00:06:39 core:91 Core init.
[Code]...
View 5 Replies
View Related
Nov 10, 2009
Upgraded to Fedora 11 and my display aspect ratio is now broken. I have a 23" Acer screen, but in Gnome its auto detecting as a 20" Acer display and the aspect ratio is wrong and the display grainy. I read the FAQs and am trying out some suggestions. Created an xorg.conf file in the correct place, contains the correct monitor settings but my display is still broken. Q. How do I force the kernel to read the xorg.conf file ?(PS: I'm kind of a newbie, have only come back to linux after a few years of using Windows)
View 5 Replies
View Related
Dec 9, 2009
I did the upgrade, over the internet, using the "preupgrade" command. All the files downloaded and I rebooted and it is all apparently working fine.When I do a uname -a command I get this response:Linux Fedora11 2.6.31.6-162.fc12.i686.PAE #1 SMP Fri Dec 4 00:43:59 EST 2009 i686 i686 i386 GNU/Linux.When I open a terminal window it says username@Fedora11:~When I run "rpm -qa" it show my installed packages all end with fc12, so I am sure I am on Fedora 12.When I used to run Ubuntu, I would just open the file /etc/lsb-release and it would show me what version I was running.What file holds that information in Fedora 12 ?
View 5 Replies
View Related
Dec 12, 2009
recently I found a Cpu Speed Icon that went on the bottom bar of my F11 Gnome display and read out both CPU speeds.I have upgraded to F12 and cannot remember where I got the Icons.
View 6 Replies
View Related
Jan 8, 2010
I did have F11 on my laptop all running smoothly and everything which is good. But now I've updated from F11 using the preupgrade tool which for what I could see everything downloaded and installed ok, that was until the reboot after the install had completed after seemingly loading F12 it left me with a black screen with a blinking cursor so after a few more reboots with the same out come I decided to see what the loading was stopping at and this is what it came up with
Code:
Welcome to Fedora
Press 'I' to enter interactive startup.
Starting udev: [ OK ]
Setting Hostname Fireline.Yuki: [ OK ]
mdadm: No arrays found in config or automatically
[code]....
And it stops loading after "Starting atd: [ OK ]" I am going to try a CD install either tomorrow or the day after then I'll go back to F11 depending if it works or not.
View 2 Replies
View Related
May 21, 2010
I've just upgraded my from F11 to F12 via software update and found F12 extremely slow to the extent that only the mosue cursor moves, the rest does not - not even opening folders or starting application.
My specs:
Core2Duo
1GB RAM
160GB HDD
It seems that
npviewer.bin is taking up up to 50% of CPU. Xorg takes 20%..
View 7 Replies
View Related
Mar 23, 2009
"Upgraded" from FC5 32 bit to Fedora 10 64 bit using Fedora Live KDE disk, and unchecking the boxes to format drives with my personal data. In the install it recognized these as SW raid devices. One is raid 1, the other raid 5.
Now, it still recognizes the raid devices, and mdstat claims they are working fine, but I cannot mount them (mount says must specify a FS type, but that doesn't work either).
View 5 Replies
View Related
Nov 6, 2009
Recently upgraded to fc11. Have nvidia working ok. Using kernel 2.6.30.9-90.fc11.i586 (not the latest). When booting up I get to gui login and see the background change. It takes 20 seconds or more before I see the login dialog box. After selecting the user it takes another 20 seconds before I see the box change to enter the password. This only happens at boot. If I logout and log back in everything is fine.
View 2 Replies
View Related
Jun 14, 2010
I had FC11 installed on a Toshiba Tecra A4 and when I upgraded via dvd, the system "hangs" after finishing the last gray bar(the bar flickers a lot at the last), keyboard ctrl-alt-del will reboot. I had used noapic and acpi=off before, but does not help now. Intel graphics, at first a flash about address collision.
View 1 Replies
View Related
Aug 4, 2011
Everything has been running well FC 14 dual boot with a Vista partition. I haven't touched the Windows partition since FC 10.Now I upgraded to Windows 7 because I am having networking issues at school and want windows while I take time to address them( I am a novice) So I upgraded the Vista and now it only boots into windows. I know I only installed on the windows partition. How do I get my old Fedora boot screen back that lets me choose
View 7 Replies
View Related
Apr 19, 2011
Recently I upgraded my Fedora 13 to its latest (stable) version Fedora 14 Laughlin. Things seemed to have gone well until I noticed that my evolution mail client stopped working. When I clicked to open Evolution, it loaded but immediately it got hanged, and every time I did I didn't work. I posted this question in fedora forum it self many views and no response. Can anyone in this form guide me as to why this is happening and how to rectify it?
View 2 Replies
View Related
Dec 16, 2010
I run my linux server on the Fedora 11 x86_64 flavour of linux. It did have 1GB of DDR SDRAM PC2700 (Crucial) in the first DIMM slot. It worked fine, however i felt the need to add more RAM to the server. So I purchased 2Gb from Crucial 2 * 1Gb memory stick of DDR SDRAM PC2700 333 CL2.5. However when these are used the machine goes through grub begins booting and then hangs. Sometimes it goes through to the login screen where it hangs, othertimes it hangs after logging in. I have performed a memory test and the results come back fine. However if I just use a single stick of memory the server boots fine (Either stick of memory works).The Machhine is dual boot and my XP professional partition always boots fine
View 1 Replies
View Related
