Hardware :: Atheros AR6000 Creating Access Point/ad Hoc?
Dec 9, 2010
I have a ARM Linux based cell phone with an Atheros AR6000 wifi chipset inside. I want to use it to share my internet connection, but never mind about that. Does anyone know if it's possible to either create an Access Point or create an Ad-Hoc connection so I can connect to it with my laptop? If so, how? I looked up iwconfig, trying 'iwconfig wlan0 mode Master essid "Access_Point"', but that didn't work. I don't mind recompiling the kernel or drivers, just tell me if it's possible at all
View 9 Replies
ADVERTISEMENT
Jul 9, 2011
Is it possible to run a Linux AP using a VM with a USB adapter passed through to it?
What distro should I try? Is there a Live CD with hostapd pre installed?
View 1 Replies
View Related
Mar 19, 2009
OK, what I want to do, I think is possible but I dont kno name of it or how 2 do it under even windows for that matter. I have my current PC connected via Ethernet directly to my house router. Now on this Motherboard, I also have a wireless nic that I have no plans on usin. Can I turn it in2 an access point/wifi for other devices like iPods, Wii, Labtops, ect?Also, how would I do it if not Wifi, use the other Ethernet port to plug up say a labtop. In which the labtop uses the net I am getting from the router?
View 1 Replies
View Related
Apr 23, 2011
How can I create a system restore point in Ubuntu, and when I do so am I able to restore to a point before installing Ubuntu?
View 2 Replies
View Related
Oct 20, 2010
In my machine, there are 2 mount points - / and /userdata. From the root user, I want to create an oracle user at the /userdata mount point, i.e the home of the oracle user should be mounted on /userdata.
View 7 Replies
View Related
Jul 27, 2010
I have a program that can create a fuse. For that i have to specify a mount point , like mono ccfs /mount. But how will I make /mount to be a fuse mount point? I donno whether my question sounds right or makes sense. But I want to create a fuse mount basically to provide it to the program. I dont hv any device or fs to mount initially .
View 2 Replies
View Related
Mar 14, 2011
I have an Ubuntu server running Samba and I would like to share out the cdrom drive to the network. I made a share of the /media directory and it seems to work fine when I insert USB drives and I am able to browse and work with files. However, when I insert a cdrom it automatically mounts to /media/<volume name> and I get a permission denied error when I attempt to access it over the network. I am assuming this is happening because the permissions do not include the execute bit and being a read only file system I can not change this. I made the directory /media/cdrom and manually mounted the cdrom to it and I can successfully access it over the network just like the USB drives. So my question is: Is there a way to make the cdrom automatically mount and unmount to /media/cdrom when I insert and eject disks instead of to /media/<volume name>? Or maybe just have the permissions automatically set so Samba users can open it instead of just see it.
View 1 Replies
View Related
Apr 19, 2011
I just bought a USB flash drive. Whenever i click it to open its contents it gives me the error " Unable to mount USB20FD " then under that it says "Error creating moint point: No such file or directory " (btw it does say moint point and not mount point, which is kind of weird.i can use the flash drive i just bought.
View 6 Replies
View Related
Jun 18, 2011
when i am trying to plug in my usb flash (16 GB kingstone) the fedora 15 give me the following error
"Error creating mount point: Transport endpoint is not connected" i don't know the reason for that
View 7 Replies
View Related
Aug 15, 2010
So theres this project I'm going to try working on during my free time and part of it includes using a wireless NIC as an access point. The way I see it, if a wireless NIC can send and receive wireless signals to a wireless router/WAP, why can't it be treated like one as a router/WAP? A router is a specialized computer after all.From what I heard this idea is possible but I'm having trouble finding results, since search engines don't know exactly what I'm talking about. Does anybody have any idea how I can accomplish this?
View 5 Replies
View Related
Sep 19, 2010
I decided to change my DSL internet connection to cable and WiFi. So far so good, and under Windows, the system is very well working.
I use openSuse 11.1 but I can't establish contact between my computer and the new Wireless N acces point.
I have a Ralink network card, which functions under Windows.
/usr/bin/lsusb gives this result : bus 001 device 006 ID 148f:2573 Ralink Technology, Corp. RT2501 Wireless adapter
dmesg | less gives (amongst others !) - so my card is recognized :
usb 1-1.2: configuration #1 chosen from 1 choice
usb 1-1.2: New USB device found, idVendor=148f, idProduct=2573
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[Code]....
The wireless access point I bought from the cable company is a D-Link Model DIR-615 which should be capable of IEEE 802.11 b/g/n. I have its MAC ID.
When in YAST, I want to make my computer hook on to my D-Link router (my new access point), I go to YAST Manage Network Wireless and I want to fill in BSSID, I get stuck.
View 9 Replies
View Related
May 19, 2011
I have done the follow steps.
sudo ifconfig wlan0 up
sudo iwlist wlan0 scan (I see my access point without problem)
then...
sudo iwconfig wlan0 essid MY_ESSID key s:MY_PASSWORD
I get the follow error:
Error for wireless request "Set
Encode" (8B2A) :
SET failed on device wlan0 ; Invalid argument.
I used s: because I want to pass and ASCII password.
View 1 Replies
View Related
Jul 7, 2010
I have a wireless network in my house through a Zyxel P-320W router, and I've noticing that the signal strength isn't very good in the basement. Now I have this old D-Link-624+ router lying around for a long time and I've been hoping to get it to work as an access point, that way I can move freely around the house without changing which router I'm connected to.
View 3 Replies
View Related
May 21, 2011
i'm using stuido 10.10 and am trying to get wireless to work. i've used Network Settings to enable the wireless connection with correct ESSID and Network Password, though when i type iwconfig it says Access Point: Not-Associated.how do i associate with the AP?
View 2 Replies
View Related
Jul 7, 2010
First time poster, some time Linux user. I've been reading and trying to create a wifi access point on my debian server. that is {intenet-router} <-> {server + usb-wifi} <-> {network users}
I've opted for this configuration as the server will become a firewall, traffic monitoring (sick of my windows machine getting hacked). I've spent a lot of time and I don't seem to have any un-clicked links in google left. I've read quite a few howtos and threads on this site and others ... I'm definitely missing something. Running: Debian Lenny (no gui)
[Code]...
I've also installed hostapd, and attempted a few things in there. Long run I want to allow wifi users to access the net. But will probably need iptables etc but just want to pass this step. I've see a few howtos seem to use ath0. It's probably only a minor issues.
View 2 Replies
View Related
Feb 2, 2010
i have a problem with connecting to AP with static IP. i have set the IP, netmask, and gateway manually thru network manager but still no luck. the status is connected but i cant even open a webpage. ifconfig command output not showing the IP address i entered.
View 1 Replies
View Related
Aug 11, 2010
About two years ago, my church set up a wireless access point. They gave it a WEP encryption, and wrote all the keys down on a piece of paper and taped it to the router, which was in full view, and reachable for anyone to get what they need and connect. I used it once, saved all the settings to the default network manager applet on my laptop (running Fedora Core 12), and put it back. Earlier this year, the front hall (where the router and paper with encryption keys was stored), was completely redone, and the router put up in the drop ceiling.
Mistake. Now the darn thing is sitting on top of Fiberglass insulation, and impossible to get to. There are people who need to connect, but since it's a church, and they don't really understand, they went and buried that router WITH all the encryption keys. So long story short, I need to get these people connected, but need to find the key... preferably without Hacking in. Is there a way, on the default "Network Manager" Applet, or in the terminal to VIEW saved keys?
View 1 Replies
View Related
Apr 2, 2011
Whilst my office is decorated I have to move my computer. To make this as easy as possible I have setup my first ever wifi. An access point (wired to adsl router). It is working by using wicd and I am wireless at the moment. What security should I put in place (wicd says unsecured). I am probably quite safe as the nearest road or house is 200m away but I would like to learn what I need to do as this is the first time in over 20 years of computing that I have gone wireless.
View 8 Replies
View Related
Apr 12, 2009
I'm sure that some of us techies have found the need from time to time to have a portable wireless bridge (see ascii art below) on our jaunts into the big bad user-woods, and I am here to ask the question of HOW to pull this off, with the least installation/configuration possible, as my tech lappy is also my main computer. What I want to do is this:
Code:
(ISP) -> (wlan0 - [MyLappy] - eth0) -> (Client computer)
Basically, thats a mess, so i'll explain it further:
wlan0 grabs the netz, and a computer connected to eth0 via switch/router/crossover cable can access those netz.
1. No configuration on the client would be prime choice rib for me.
2. Client should be any OS/Arch.
Any grand ideas out there? Currently using FC10, with various extra repos enabled.
Oh, and N00by alert, I'm learning quick, and am not shy to try new/complicated things, just bear with me!
View 4 Replies
View Related
Jul 16, 2009
i ahve just installed fedora 11 kde edition and i used to use fedora 10 after finish installation i edit the connectons to connect to my network im in lan network but i connect my cable to an access point to free using my laptop anywhere after adding every thing (wep key ,static ip's,) as i used to do and i have the connected sign at the system tray.i open the browser but no internet connection pinging the gateway returns "Destination Host Unreachable".
View 1 Replies
View Related
Dec 11, 2009
I am looking for help on how to create a wireless access point using fedora core 12.I have done some searching and have not found anything.
View 1 Replies
View Related
Feb 18, 2010
Install Fedora 12 on my laptop and having problem connecting to access point using WEP . I complied with wireless setup with key but will not connect. Works with security disable, the router is a Westell 327W from what was Bellsouth.
View 1 Replies
View Related
Aug 23, 2011
I have a laptop with Fedora installed and an iPad.The only connection to internet in my house is wireless router. It has strong signal to catch it with laptop in every corner in my house, but not strong enough for an iPad..Since my iPad is mostly near my laptop, I'd like make my laptop to be turned to wireless repeater or that serves as access point so I can connect to network with an iPad.How can I do that from my Fedora machine?
View 1 Replies
View Related
Mar 29, 2010
I have recently installed open suse 11.2 on my hp hdx18 laptop replacing windows 7. trying to use my phone as a bluetooth access point so i can connect to the internet when im out and about and there isnt a bt openzone network around. my phone is a sony ericsson w910i. i can connect to my phone via blue tooth and use it as a remote control and browse, send and receive files. but cant figure out how to use it as an access point to the internet. win7 had an option to connect via access point giving me instant internet access over the vodafone mobile phone network, but i cant find an option like that in open suse, if there even is one.
View 2 Replies
View Related
Jul 17, 2010
I am using OpenSUSE 11.2. Knetworkmanager seems to connect to AP with the highest signal most of the times(even after choosing others from the scan list). But I want to connect to another AP which has a lower signal but lesser number of users. how to ALWAYS connect to a specific AP(I know the address of the AP) using the command line or some other method.
View 2 Replies
View Related
Aug 19, 2011
I have a complicated situation due to my goals and network structure. I have in mind a potential solution, a bridge, but I do not know whether it is feasible or what hardware it will require.
The network:
My apartment community provides residents with free Internet access through an ancient T1 line. We do not have the option of other Internet providers, so having a router and modem in the home are not an option. The T1 line is split among some 24 switches, one for each building, and each switch has one port per floor. At each floor, there is a D-link WAP, and each has a separate SSID and WEP key. Additionally, they control access at the switch level using Access Control.
My goals:
I'm used to being in control of my networked environment. I like to have friends over often, and most of them have a laptop, a smart phone, or both, which makes Access Control a pain. I don't want to have to think ahead and get their MAC addresses to the IT consultant while he's here during business hours. My wife and I have 6 devices, two of which require an Ethernet connection.
I use a few applications for streaming that utilize UDP (I'm not sure if the WAPs are smart enough to even handle this) and I don't like having my traffic muddled with my neighbors.
I should note that I tried extending the network with my Airport Extreme router, which apparently only works with other Apple devices. I've also looked into WDS, but that seems to require an unlikely amount of cooperation from the IT consultant on site.
The potential solution: a Linux server that acts as a router. Ideally, it could act as a webserver for a small static site as well, but let's focus on the routing. I'd like to bridge two NICs and use masquerading (Internet Connection Sharing). The public interface would connect to the WAP using WEP. The private interface would allow up to 8 devices to connect to the server.
It seems easy enough to configure the public interface, and even to bridge the connections. What I've never done before is purchase a wireless card that can accept multiple clients. Maybe they can all do this?
View 2 Replies
View Related
Jan 13, 2010
I have a Sonicwall access point, which I am able to set up through the interface, but after that I am unable to achieve a connection through my wireless card. I have a good understanding of everything involved, but really have no hands on experience when it comes to networking.
Code:
lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 735 Host (rev 01)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)
[code]....
Also, I should have mentioned that @ the interface for the Sonicwall it said that "no DNS server had been specified", but I set it up for DHCP, and I thought my ISP is using PPPoE (which I also thought used DHCP).
View 1 Replies
View Related
Mar 25, 2010
i've finish install driver for my wireless adapter and the result like this:
Code:
rapc0d@rapc0d-laptop:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[Code].....
View 1 Replies
View Related
Apr 15, 2010
I just installed the wicd network manager and when i was setting it up it said it couldn't find the ip address so when i input the address its saying it can't connect to a wireless access point. I am using wireless that has worked with the default network manager but will not work with this one.
View 1 Replies
View Related
Nov 7, 2010
I'm trying to set up a wireless access point and router using Ubuntu 10.10. My machine has an Atheros AR5001X+ PCI card, and eth0 is connected to an ADSL modem.After literally days and days of going in circles, I'm hoping that somebody here can help get me on track.This sort of works, though I had to go through some other contortions to get the madwifi driver to finally compile on my machine.At this point, I can see and connect to the WAP, but nothing more. When I try "sudo /etc/init.d/networking restart",
I also have a second problem, which is that I want to use WebMin to manage this server, but I cannot figure out how to get the ADSL client module configured -- RP-PPPoE version 3. It seems to expect to work with pppoe-start, pppoe-stop, and pppoe-status, but when I try to run pppoe-status it says "Link is down", even though my ppp connection is actually working.Is is possible to use the WebMin ADSL client module with Ubuntu? I spent a lot of time trying to get pppoe-start, stop, etc. working but it was a complete mess and never seemed to behave. Finally, I just put the ppp startup commands into the /etc/network/interfaces file and that worked, but now the pppoe-* commands no longer seem to function.
View 2 Replies
View Related
