General :: Which Distro Would Be Best For Old Averatec Laptop
Jan 17, 2010
I have an Averatec Laptop, the screen was broken so we took it off an hooked it up to a small "E" flat monitor and it works fine. We run the Laptop as a desktop now. It has Windows XP service pack 3 on it and runs using a DLink wireless adapter. Our Averatec has a 1.39 GHz processor with 224 MB of Ram and 27.9 Gb of Hard drive.I burned an ISO CD of Puppy Linux and ran Puppy from the CD. It installed well but when I went to use an online game called Farmville the whole screen froze and I had to turn the computer off to get it going again.
Farmville worked on the computer when it ran XP could it be that Puppy Linux is not the right Distro for my computer or do I need a distro that has Java or flash applications on it and if so where or how can I do this?
I have an averatec laptop 4300series. I've installed linux suse-11 on it but problem with display adapter card. I couldn't find on Averatec site any appropriate display adaptor card for linux.
I currently have a Toshiba Satellite C655 laptop running windows 7. What would be the best distro for a laptop? I would prefer that it installs with a windows installer, because I don't want to try repartioning to be able to keep windows. I've tried Ubuntu's "wubi" and Mint's "mint4win". However, I wasn't able to connect to wifi on either of them.
in the linux world i have a old thoshiba laptop 2550cdt.im wondering if you can post me some suggestions about the distros. which one i should download for my laptop?
I have an Acer TravelMate 2300 and I was wondering someone could advise me a distribution and configuration that would run smoothly on the system. I have been trying to install the latest version of Mint (no. but it seems to be too much and tends to lag out.
I got a new laptop with 320 gb hdd,2 gb RAM and intel core i3 processor...the manufacturer is lenovo..its pre installed with windows 7 ultimate pack..i'm interested to install a linux distro..so i wanna know which distro suits my laptop configuration.in a best way.
Used ubuntu a little, few days ago tried booting with puppy linux on usb drive.
I was amazed by its speed, since everything runs in ram, its not comparable with w7. That is the key feature im looking for.
I know, that the most common recommendation here, is to "try out different *nix based OS-es and find the one that suits".
I hope i can rely on other people experience, who have comparable system and silmilar hopes.
What i expect?
-working infrared -speedstep -hibernation?! -support for canon camera -ACPI (crucial, since t41 has "fan always on" issue) -quick boot -constant saving (puppy saves data to memory, which is a problem is power-cut happens)
Im sure puppy can fill out most of these requirements, but still im looking word from you guys.
Ive heard a lot good about algo zenwalk, vector, MijnPup, igelle...
Oh, maybe even tinycore will work...
There are simply so many of them, but i would like to sort out one which has periodical updates and has fulfilled my requirements. Also, Gnome interface would be nice.
I state that, i wont be needing bundled software, because i can get what i want later on and i don't want excess trouble uninstalling software.
I have an old old laptop and wanted to try Linux on it. I know next to nothing about Linux and slightly more than nothing about Unix. I made a pen drive with Ubuntu on it but the laptop won't boot from a USB device. So I downloaded several distros. I tried to boot a Ubuntu CD but it won't go past the splash screen. I tried DSL and it won't boot that either. So it's still running Windows 98SE at this point.
I tried several of the distro's under QEMU on my desktop and they seem to work... so the distro's are OK I think. Then I tried burning Knoppix on a DVD and booting the PC. I get the splash screen and it get to the point of saying something like "running dbus" and just hangs forever. I waited 40 minutes and still nothing. Tried booting the PC instead with a distro called "PCLinux Phoenix XFCE" that I burned onto CD. Once again splash screen and then nothing. Finally got a message saying it can't configure video and do I want to do it by hand. Really? Like I can do that. So I booted Win XP again and somehow THAT manages to run both monitors.
i got given an old IBM think pad R40 laptop with a broken HDD and im looking for a linux distro for it, its got 128 mb of ram and a mobile P4 - M 1.80ghz processor all im gonna use it for is basic word processing/taking notes in the field etc. but i would like to have a reasnoble GUI ive tried Puppy, DSL and SLITAZ but their GUI's are rather crude.
I need to install linux for my acer 4741 laptop. Anyone who did this before and managed to solve the device driver problems please share your experience with me. I already installed the backtrack linux and I able to make it work the both wireless and wired network connections and also the sound card is also working. But the problem is that I unable to configure 1360x768 resolution of the display. The display looking really flat and ugly under that linux. some help ? can you guide how to correctly configure the /etc/X11/xorg.conf ?
I got a laptop for free. It's an old POS, but it was free, and it basically works for pretty much what I am going to use it for. Web Browsing, Cloud Computing type stuff.NOTE: I am an extreme Google Whore. To paraphrase Jay-Z: Google Mail, Google Docs, all Google Everything. lol. when considering my question, please keep this in mind.anyhow, this is what I am working with:
HP Pavilion zt1130 Windows XP SP3 Intel Celeron Processor 1133MHz 684MB RAM S3 Graphics Twister 16MB 20GB Hard Drive DirectX 9.0c Linksys Wireless-G Network Adapter
as I mentioned above, I use Google Stuff for my primary computing Needs. GMail, Google Docs for Office stuff, Reader for RSS, etc. with Google Gears to make these apps usable offline. I also use LastFM, Twitter, etc. My preferred browser is Chrome, but I can settle for Firefox if necessary. I am trying to figure out if getting off of Windows XP, and switching to Linux might help with boosting the performance of this old, crappy machine(does the OS even matter in regards to this?), and maybe push it more towards being more of a Cloud Computing machine. and which Distro would probably be best for me and my computer.
I know absolutely nothing about Linux beyond common, basic stuff. So anything that requires some complex set up is not what I am looking for. I'd also need a decently easy to use GUI. But I am unsure about hardware compatibility and things like that. I don't wanna wipe my HD, and break the computer trying to install Linux,
One of the big problems I'm having is with the Network Adapter. It won't work with Ubuntu or any Ubuntu based distros. Backtrack 4 won't even start for me (there's a problem with the ACPI, and I'm not sure how to turn it off on Backtrack). Is there any distribution that I won't have to mess with the Kernels too much (I tried Gentoo, but that was a bit over my head)
I'm trying to build a system out of some old laptops for some relatives. I have two Averatec laptops a 3100 series and a 3200 series. Neither Ubuntu nor Kubuntu will install or run from the live cd without locking up solid.
Trying to install results in a complete freeze somewhere during the installation process. I've also tried the alternate cds to try and avoid a possible graphics driver problem. However, the problem doesn't seem to be X freezing. When I run the live cd instead of the install, the system freezes after a few minutes and is completely halted and must be hard rebooted. No keyboard combinations work including the alt+sysrq combinations.
I tried to get some output from the kernel log by running the live cd and then plugging in a flash drive. I then dump the contents into the flash drive (tail -f /var/log/kern.log > /media/USB DISK/kern.log). I got no error output, but maybe this is because it didn't have a chance to flush?
I've also tried locking the processor at a slower speed with no luck. These laptops do not have a processor with Cool 'n Quiet. I looked for powernowd as I found a recommendation to turn that off, but I didn't find it in the system.
It seems to be some kind of hardware incompatibility since it happens exactly the same on both laptops, but I am out of ideas.
I just receive a very thin laptop but pretty old, it has 2 hard drives or kind of hard drives... of 16 GB each, I don't know about the RAM, probably 512 Mb, maybe 1 Gb (I don't remember how to see that on windows) and an intel core duo.It's currently running a legal windows xp (I specify legal cause it's pretty rare), it's not "slow" but it could be a lot faster, it still takes a few seconds to load IE and stuffs.
I'm a mac user, I'm only using debian server version for web servers and databases so I don't know how it works with a user interface.I've heard about Archlinux, it says it's pretty fast but do you know which one is the fastest one ?
I'll be using the laptop for taking notes only, probably on google docs but it'd be cool if I could store some images and stuff without waiting 10 secs to open a new window.By the way, if you could quickly explain me how do I install the GUI and which one is fastest cause when I've installed Ubuntu, Gnome was already installed by default.Finally, there is no way to insert DVD / CDs, it's like the Mac Book Air, so I haven't installed any linux distro from a USB stick either.
Im kind a new to open suse, though I think its a very nice alternative to the ordinary Linux distroes.Recently I tried to make a distro for my laptop in the living room, -the only thing its supposed to do is play music, and be able to connect to the internet from time to time. However, I must have forgotten some packages or something, cause when I booted the engine after installing,-(wich btw went smooth:-)) -I cannot play any music, -getting some fail message. -Now iVE installed all the g-streamer packages and the totem player, what else do I need ???. -Have been looking through the packages, but I dont seem to find any other packages related that i think i shound use...
Been using Ubuntu for 1 yr now on my Dell Dimension 8250 but a newbie with my Averatec AV3270-EH1 laptop circa 2005. Ubuntu 10.04 does not detect the Integrated WLAN card/adapter. I've looked at all the forums/posts but none had the issue I have. When I type lspci into the terminal i get this back:
00:00.0 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge 00:00.1 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge 00:00.2 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
[code]....
And when I type in iwconfig:
lo no wireless extensions. eth0 no wireless extensions.
what is the diffrence between desktop ubuntu 10.04 lts and Laptop ubuntu 10.04 lts distro?i've try'd kubuntu 9.04 x64 on mi desktop cpu e6400 2gb ram 2x 500gb,1x250 gb and GF8600gt with 512mb ram the cpu overclocked to 3.0ghz and fsb from 1066 to 1200+ with ram from 800 to 960 mhz.it was flying.now after solving mi previous problems with grub. i decided to instal 10.04 lts x86 /32 bits ubuntu to mi toshiba laptop A100-529 1.6 ghz celeron 1gb ram@533 80 gb.it's mooving verry verry slow.
also i have to admit that this version is full of apps an enviroment features..but still on minimal visual effects it's running like mi granpa' anny syggestions ?
Lubuntu is nice - but it seems the LXDE version is not as up to date as Fedora LXDE Spin or even Debian squeeze with LXDE installed. I do like Chromium on Lubuntu though... its faster and a nice touch. I am looking for a lightweight 64-bit distribution for my main laptop (it is by no means "old" or "low spec" but I like that Lubuntu starts up in like 2 secs).
LXDE version seems not to be recent (esp in 10.04 version which seems to work more stably for me - with Nvidia drivers etc)64 bit install is currently a pain - requires first install of minimal CD or alternate CD both of which required wired Ethernet, then install of lubuntu from PPA. Native 64-bit support would be nice. Linux Mint LXDE, for example, is also only 32-bit.
My laptop's been locking up in Linux (Ubuntu, Backtrack, Puppy) periodically for a while now. When it locked up, it was always immune to the magic of SysRq, which I thought might indicate a hardware problem. It became so bad that I had to stop using the laptop.
Today, when I turned it on and tried to boot into Fedora 12, I got the following error (just once, it just locked up at various points during the splash screen after this once):
double fault: 0000 [#1] SMP last sysfs file: CPU 0 odules linked in: Pid: 1, co m: swapper Not ta nted 2.6.32.11-99.fc 2.x86_64 #VGN-T 250N RIP: 0010:[<ff
All the seemingly missing letters were really missing, not my typos.
As you can see, kernel version is 2.6.32.11-99.fc12.x86_64 and my laptop is a Sony Vaio TZ 250N (Core 2 Duo ULV 1.2GHZ). Note that with the other remaining kernels from the updates, nothing ever happened other than the locking up. The core temperatures hover pretty high, about 55-60C peak but this is still below the critical temp. Memtest came up clean when the problem first started happening.
I have a linux box set up as a multi-purpose server for my home with three Windows client PC's. The linux box is based on a slightly modified Slackware 9.0 distribution using Linux 2.4.20 and an unfortinately old, slow AMD processor with a miserable 512Kb RAM. The linux box serves the CIFS file system to the Windows boxes, runs the SQUID HTTP proxy, the Apache web server, a print server, does masquerading, mail serving and a very effective firewall using iptables.
This system, although slow, has run perfectly for several years.Let me say that again - This system works perfectly.I had decided that now is the time to upgrade the hardware, so I bought a Gigabyte LGA775 motherboard which has two 1Gb network interfaces on it, an ASUS 256Mb PCI-E display card, 2Gb of DDR3 RAM, an Intel Core2-Quad processor and a bunch of 500Gb SATA drives to set up a RAID5 array (but I intend that the system boot off one of several 40Gb PATA drives I have).I set up the processor, motherboard, display card, RAM, a SATA DVD Drive and a 40Gb PATA hard disk in a "breadboard" layout and installed distro 13.1, being careful to set up the static IP for the local network, dhcpcd to get an IP address from the cable modem (my internet connection) and to enable ip_forward in the network configuration.
Then I installed a script invoked by /etc/rc.d/rc.local which installed all the SAME iptables rules as my old Linux box. There was one minor glitch when I had to change 8 occurrences of "-d ! $LOCAL_NET to" "! --destination $LOCAL_NET" but that was no problem. I also set up /etc/resolv.conf, /etc/hosts , the BIND server files etc. etc. exactly as in the old box.
I am able to ping mirror.aarnet.edu.au (this is at the heart of Australia's internet hub network - if it's down the whole bloody thing is down) and have the system find the correct IP from the designated nameservers and contact that server with a return trip time of 35ms. I am able to run a telnet session from one of the Windows boxes and edit files on the Linux server. So both network interfaces work and I've got them the right way around.I am able to run FTP on one of the Windows boxes and connect through to mirror.aarnet.edu.au, although it seems to hang when I try a DIR (but then so does the old linux system).
I have Windows and Pclinuxos on my machine. I get the option of selecting either when I boot up. I now want to add Mandriva One, giving me three choices. I've created a new partition for Mandriva and the table now looks like this:
[Code]...
I have tried installing a third OS (Windows + 2 distros) in the past but still only got two choices - Windows and the last installed distro. The first distro was still in the machine but not showing on the boot up screen. I've tried to read up about chainloading but don't really understand it.
How can I know all the tools and app that comes with a distro, for example Debian 6 ?I can see that linux distros have a lot a small , medium apps (natives like cat, join, paste, etc; and 3rd party like iwconfig, etc=)So , how can I know what i have with a linux distro ?
I would like a new linux distro. I've been using ubuntu for like 2 years or more and I'm just done with it. Some things that I want out of the new distro are: Since I like learning, I want the distro to NOT be so user-friendly. I want a challenge. Just anything new to learn would be amazing. I need wireless support out of the box though, since that's the only source of internet I have around here.. I need it to be installable from usb, since i'm using a netbook without a cd drive.
I've had Ubuntu (8.10) on my netbook in the past and I really liked it. I'm currently running Fedora and feeling like I should "change it up" again. I've played around with Ubuntu 10.04 Lucid a little, and so far I'm very impressed. I've always wanted to try Arch, but I'm worried I won't have the driver support I need for all the non-standard hardware in a netbook.
Does anybody have a suggestion for a new distro to try? I'm preferably looking for something feature-rich over light-weight, and something that I can have up and running with a minimum of configuration (at least partially working).
I bought an Eee PC 1000, the Linux SSD model, a couple years ago. I ended up putting Easy Peasy (then called Ubuntu Eee) onto it, only to be dissatisfied with the speed. Then I put Windows XP on it, and with a LOT of tweaking it ran sort of okay. Now I pulled it out and dusted it off but I want it to run Linux.
It has the Intel Atom 1.6ghz processor and 2gb of RAM (I upgraded it) so there's no lack of power there, but the SSD is extremely slow; it has a small write buffer, but when you do anything slightly significant you can feel the system stutter every second or two as the SSD halts everything while it dumps its full cache to disk. I'm talking serious stutters, and the cache isn't very big; to get Firefox to not stutter I had to move all caching into RAM and disable history (even just writing the history log to disk froze the system with every webpage).
Anyway, I hope I've given you a decent idea of just how slow this SSD is. With that said, is there a Linux distro that is optimized for an extremely slow hard drive but decent powered system? I'm not looking for something underpowered because the processor and RAM are plenty powerful, I just want something that perhaps is optimized for not writing to disk often.
I didn't know where to post this, but I hope I get an answer. I'm not new to Linux, but I'm not a super user either. I've been distro hopping for years, until I found Mandriva 2010. I love it, but whenever I install the ATI drivers I get a Kwin has crashed error every time I start up. So I tried openSuse 11.2, it's a pleasant distro implements KDE well, but I got the same results with openSuse.
My question to you guys is, what current KDE distro has the best support for ATI cards? Or is there a way to get either KDE or openSuse working correctly? I've tried everything I found in other forums to no avail.
My specs: XFX HD Radeon 4770 AMD Athlon II X4 625 2 GB of Ram
My question is, is it okay (for example) if i have an Ubuntu desktop and i will connect it to a Red Hat PC Server. Will it do? or should i have to have a same distro for both Desktop and Server.
