General :: Kernel - 2.6.29.1 Is Not Booting Over 14

Feb 15, 2011

i have installed kernel 2.6.29.1 on fedora14. when i tried to boot the kernel 2.6.29.1 it does some USB identification,and then it got hanged and displays nothing... logs are

[1.955941]usb3-1: configuration #1 chosen from 1 choice
[2.054770]input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input1

View 2 Replies


ADVERTISEMENT

General :: LFS 6.8 Not Booting Into Right Kernel

Jun 2, 2011

I have been following along with Linux from Scratch 6.8 and everything has been going well. I got past an issue with GRUB (Ubuntu 11.04 uses a different version of GRUB than LFS so caused some issues).

Now when I boot into the Linux kernel recommended in the LFS book, 2.6.37, I get the following kernel panic: "VFS: Cannot open root device "sdf6" or unknown-block(0,0)". I'm sure this means that I didn't load the right drivers when I configured the kernel. But I went back in and recompiled and chose every SATA driver listed and I still got that error. It does let me boot into the kernel that Ubuntu used (2.6.38) so I guess I'm ok. I just want to know how to get the 2.6.37 to compile right.

View 1 Replies View Related

General :: Booting A Kernel And From A Cd

Nov 7, 2010

I may just be stupid asking this but how do i boot a kernel and an initrd from a cd? it is larger than a floppy so i can't emulate a floppy.

View 14 Replies View Related

General :: Custom Kernel Not Booting

Oct 7, 2010

Had a custom kernel (2.6.35.5) running under Slackware 12.1 and also the same kernel on an Ubuntu 10.04 machine just fine, however after a clean install of Slackware 13.1 this kernel no longer works (This kernel was re-compiled with the same .config file under Slack 13.1) as I keep getting the the following: -Please append a correct "root=" boot option Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,3) The strange thing is it keeps looking for the root file system in hda1, however the stock 13.1 kernel finds it in /dev/sda1 so the root partition is /dev/sda1 in lilo and the harddisk is known as /dev/sda.

View 3 Replies View Related

General :: Uncompressing Ok - Booting The Kernel 'then Nothing'

Nov 12, 2010

ive been trying to install a program called stanton finalscratch which runs on a linux platform dedicated to itself and when i try to install on a seperate partition to my windows xp sp3, it gets as far as...

uncompressing linux ok, booting the kernel then nothing happens. i dont know that much about programming computers so any answers need to be put simply. on the setup screen it says it is syslinux v1.66 thats as much as i know. if any other info is needed i will do all i can to provide it.

View 12 Replies View Related

General :: Compiling Own Kernel - Error Message On Booting

Aug 7, 2010

These days, I tried to compile my own kernel. Now, it seems work. However, when the kernel is booting, I always get the error message like below:
acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
It looks that something is wrong with my acpi subsystem's configuration. But no matter How I reconfig it, this message still occurs.
My distribution is UBUNTU 10.04 LTS
original kernel with the distribution is 2.6.32
My own kernel is 2.6.35

View 7 Replies View Related

General :: Thinstation Bootable Cd Stuck At 'Booting Kernel'

Jan 14, 2011

First off im very new to linux and have only been involved with linux for a couple days. Anyways, let me explain what i'm attempting todo. I want to make a DVD to automatically restore a partition without any human interaction other than inserting the dvd and turning the pc on. I'm using norton ghost 11.5 to restore the image and im using thinstation 2.2 as my OS.I have a cd that will boot up thinstation but then i would have to type in a command to have ghost start restoring the partition. so basically i figured i would put a script in the etc/init.d folder of initrd. so i extracted the contents of initrd using 7zip, put the script in the directory and then compressed initrd into .gz format. however now when i put the newly made dvd in i get stuck at "Booting the Kernel."

is this a problem with initrd format? if so what format does it need to be in and how to i get it into that format?is there some way to set the parameters of the kernel to fix this problem? and if so how do i go about doing that?

View 1 Replies View Related

General :: Booting Into Kernel - Error 13: Invalid Or Unsupported Executable Format

Sep 13, 2010

I've been playing around with trying to assemble a bare-bones Linux system on a disk.img file through a loop device. I compiled the most recent stable kernel and then copied it onto the root partition in the image. When I try to boot up into the image using qemu, grub gives me this:


Code:
Booting 'tiny'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinux
Error 13: Invalid or unsupported executable format

Press any key to continue... I am confused because I compiled the kernel with 'make bzImage', and the architecture hasn't changed (qemu on the same machine used to build the kernel). So it should be bzImage format. Is that what this Error 13 means, or could it means something else is wrong...?

View 1 Replies View Related

General :: Error "driver Mdio-gpio Already Registered Aborting" Of Booting On Kernel 3.0.0

Aug 3, 2011

i did compiled and installed kernel 3.0.0 on ubuntu 10.04 lucid lynx. well everything is fine except, a error message shown during the booting. Code: error: driver mdio-gpio already registered aborting how can i solve this error?

View 6 Replies View Related

Fedora :: Kernel 2.6.33.2 Not Booting With 11

Apr 26, 2010

I had fedora-11 installed and the kernel version was 2.6.29 I downloaded new kernel version 2.6.33.2 and did following,

make mrproper
make
make modules_install
make install

when I rebooted and selected 2.6.33.2 from grub entry, fedora logo came and spalshed, after that monitor started blinking and now its not going anywhere, i can see blank screen and nothing else. If I do ctrl+alt+del it shuts down the system normally.

I tried interactive mode also system did fine untill this point "registering binary handler for windows application" after that the same problem came, monitor started blinking and screen is blank., Any pointer regarding this will be helpful , what exactly went wrong? I can provide more info if u need it.

View 2 Replies View Related

Fedora Installation :: Kernel-2.6.29.1 Is Not Booting Over 14?

Feb 15, 2011

i have installed kernel 2.6.29.1 on fedora14. when i tried to boot the kernel 2.6.29.1 it does some USB identification,and then it got hanged and displays nothing... logs are [1.955941]usb3-1: configuration #1 chosen from 1 choice [2.054770]input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input1

View 4 Replies View Related

Ubuntu :: Booting With Certain Versions Of The Kernel

Jul 14, 2010

I've been having some odd kernel issues recently. A while back I installed 2.6.32rc6 when I first upgraded to 9.04, because it solved issues I was having with surround sound. A few months back I installed mythtv and the mythbuntu binaries as well, although I have since uninstalled them. All of a sudden, I seemed to have issues booting into ubuntu with certain versions of the kernel, where it would just freeze at the white ubuntu logo, while other versions of the kernel would load fine (I think 2.6.31?) but it would display the mythbuntu logo instead (not sure if this is related).

I just upgraded to 10.04, and I still seem to have issues booting with certain kernel versions. Right now I'm running 2.6.32-020632rc6-generic which seems to work, but it's outdated, and I have surround sound issues again. Which one should I be using? Is there a way to clean this mess up? How do I fix the problem of freezing at the boot screen?

View 3 Replies View Related

Ubuntu Installation :: Booting With The 2.6.32-25 Instead 2.6.35 Kernel?

Nov 24, 2010

Since upgrading to 10.10, I've been unable to boot the 2.6.35 kernels, either -22 or -23. I've been booting with the 2.6.32-25 instead, but I would like to get this resolved.

I can provide more detailed info at request; the output of lshw, if that'll be useful, or details of GRUB.

View 8 Replies View Related

Debian :: Booting Right Kernel In Squeeze

Feb 9, 2011

I followed the documentation for upgrading lenny -> squeeze. After reboot I get 2.6.26 not 2.6.32. I also ran 'update grub' before reboot. Here is what I have:

jurka@arkiv-x:~$ dpkg -l linux-image-2.6.*
ii linux-image-2.6.26-1-686 2.6.26-13lenny2
Linux 2.6.26 image on PPro/Celeron/PII/PIII/P4
ii linux-image-2.6.26-2-686 2.6.26-26lenny2
Linux 2.6.26 image on PPro/Celeron/PII/PIII/P4
ii linux-image-2.6.32-5-686 2.6.32-30
Linux 2.6.32 for modern PCs

View 4 Replies View Related

Slackware :: 13.1-64 DVD Hangs On Booting Kernel

May 27, 2010

Dell optiplex 740 running slackware64-13.0 2.6.34 #1 SMP Mon May 17 13:50:21 EDT 2010 x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ AuthenticAMD GNU/Linux downloaded install DVD using Eric's mirror script burnt two dvds

I get the screen asking if I need to enter anything press enter the dots run across the bottom of the screen then jump to the top and machine dies after line "Booting kernel" even the 'elephants can't get it to move' power off is only option other dvd's are bootable including ones burnt on this machine after the 13.1 dvd

View 14 Replies View Related

Ubuntu :: OK Booting The Kernel Hang?

Aug 15, 2010

I'm trying ti boot an xubuntu lice cd 6.06 on a new computer , Intel DG43NB board. I have tried several options at boot with the f6 key and have had no luck at all.It goes to the OK booting the kernel screen and locks up there.

View 1 Replies View Related

CentOS 5 :: Xen Kernel Not Booting Automatically

Feb 11, 2010

1st referring to: [URL]. I have no paid support channel at Redhat as I am using an evaluation copy. I use a pretty fresh installed RHEL 5.4, which should be very similar to CentOS. After the basic installation I installed xen and xen-kernel via yum with no errors. I can manually select the xen-kernel at boot time. But after booting the normal kernel shows up.

[root@noname boot]# uname -r
2.6.18-164.11.1.el5
My /boot/grub/menu.lst looks like:
default=1
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
hiddenmenu
title Red Hat Enterprise Linux Server (2.6.18-164.11.1.el5xen)
root (hd0,0)
kernel /xen.gz-2.6.18-164.11.1.el5
module /vmlinuz-2.6.18-164.11.1.el5xen ro root=/dev/VolGroup01/LogVol00 rhgb quiet
module /initrd-2.6.18-164.11.1.el5xen.img
title Red Hat Enterprise Linux Server (2.6.18-164.11.1.el5)
root (hd0,0)
kernel /vmlinuz-2.6.18-164.11.1.el5 ro root=/dev/VolGroup01/LogVol00 rhgb quiet
initrd /initrd-2.6.18-164.11.1.el5.img
title Red Hat Enterprise Linux Server (2.6.18-164.el5)
root (hd0,0)
kernel /vmlinuz-2.6.18-164.el5 ro root=/dev/VolGroup01/LogVol00 rhgb quiet
initrd /initrd-2.6.18-164.el5.img

I can't see anything wrong and I did not change/try anything. My machine has a intel core 2 quad q6600 cpu, wihich should be capable of virtualization. It's not a problem of default=1 or default=0, because I selected the xen-kernel manually in the grub menu. Btw: I changed the menu.lst with default=0. Then the system is repeatedly booting; last visible message 'starting udev'.

View 4 Replies View Related

General :: Booting Live Cd Of Fedora 15 / Change Argument During Booting Mode?

Jun 1, 2011

I am in a situation to boot fedora 15 live cd in to command line mode, not graphical mode, for some testing purpose. how to change argument during booting mode

View 4 Replies View Related

Fedora X86/64bit :: Upgrade - Kernel Isn't Booting

Sep 30, 2010

I upgraded my F13 kernel from 2.6.33 to 2.6.34. But, the newer kernel isn't booting. It starts the booting process and then goes idle. how shall I troubleshoot?

View 2 Replies View Related

Fedora :: Debug New Kernel Not Booting - Freeze

Apr 13, 2011

I just installed 2.6.35.12-88.fc14.x86_64 via Software Update and rebooted. When selecting new kernel to boot from, the boot sequence doesn't finish. I am not sure how t o troubleshoot; I am prompted for the PassWord for encrypted /home, but after that, it freezes.

View 8 Replies View Related

Ubuntu :: Getting Kernel Panics While Booting From LiveCD / USB

Feb 17, 2011

I just built a computer with these specs:
Asus P7P55D-E Pro Mother Board
2 x 4gb GSkill RipJaw 1333
Intel Core i5-760 cpu
MSI nVidia GeFore GTX-460 Video Card

When I try to boot from a live CD/USB I always get some sort of kernel panic, most times about USB controllers and other times about cpu_idle. I have pictures of these that I can post but nothing from any logs because this is happening even before I install. I have left memtest running over night for 11 hours and had no problems, I have tried to boot with only one stick of memory, I have changed the video card to a GeForce 8800 and I have tried everything on a different motherboard and still no luck. Would I wrong to say that there is a problem with the CPU and should I return it? My only problem with all of this is that Windows installs perfectly fine on the computer with zero problems...weird.

View 1 Replies View Related

Red Hat / Fedora :: Error 8: Kernel Must Be Loaded Before Booting

Nov 16, 2010

I'm relatively new to Linux, and have broken many more things than I have fixed.. I guess that's the learning process eh? So here's my problem: I've been experimenting with the mount command, and have mounted my local file system (sda1) to a directory (/mnt/test). I was attempting to mount an external hard drive, and sda1 clearly was not the correct drive (I did eventually discover where the external was located, however sda1 remains tied to that directory). I rebooted my system, and now the Grub command prompt loads. When I type "boot" I'm presented with "Error 8: Kernel must be loaded before booting". I'm assuming this is because I mounted my local file system, but I could be wrong. Does anyone have any ideas how I could remedy this?

View 5 Replies View Related

Slackware :: 64 Crashes After Booting Generic Kernel (64 Bit)?

May 3, 2011

I've installed Slackware64 on a Toshiba Qosmio laptop (booting with ext4, SAMSUNG HM500JI HDD, 3 GB Ram, Intel Core 2 Duo Processor, Intel chipset and graphics).The system boots the huge kernel just fine. But after booting with the generic kernel AND after having prepared a mkinitrd with the mkinitrd generator, the boot process crashes at ~4sec with a panic.

View 14 Replies View Related

General :: Not Booting Through Nfsroot But Booting Properly Through Flash

Jan 6, 2011

I am using a linux kernel 2.6.36 using mips architecture. I have succesfully booted the machine through Flash memory, but it is not booting through nfs. It is getting stuck at the stage where the image starts loading. In short the vmlinux.img file is being copied properly to nfsroot but the image is not loading.

View 5 Replies View Related

Fedora X86/64bit :: Booting Updated 2.6.39.1 X86_64 Kernel

Jul 19, 2011

In an attempt to ameliorate some other problems (lm_sensors, and loopback), and based on several forum entries, I decided to update the default f15 kernel (2.6.38.35) using kernel-2.6.39-1.fc16.x86_64.rpm from rawhide. It seemed to install without problems and when I rebooted it seemed to hang just before completing the boot process. The on screen boot messages ended with:

Started Display Manager
Started LSB: daemon for libvirt ........
Starting LSB: suspend/resume libvirt guests on shutdown/boot
[ 12 ......
about a dozen similar lines ending with
[25.030991 hci_cmd_timer: hci0 command tx timeout
then it apparently hangs

However, at that point I can log into to a console using Cntl-Alt-f2, so most, if not all, the crucial boot processes seem to have completed. There is an issue with the nVidia driver that I will deal with by modifying /boot/grub/grub.conf to re-enable nouveau, but I am stumped by what is causing the hang up. There is a certain amount of traffic regarding a similar problem with Ubuntu 11.04, but no solution other than it seems to be related to a BIOS bug (NFI)

what sub-system uses the "hci_cmd_timer" and why it might interfere with the boot process? Has anyone else run into a similar problem with f15?

Is there a better way to get an updated kernel in f15? I do want to keep all the Red Hat patches and back ports, so reluctant to build a kernel from scratch from upstream sources at kernel.org (and maybe just a bit apprehensive ;-})

View 11 Replies View Related

OpenSUSE Install :: 11.3 - Freezing While Booting And Reports Kernel Bug

Feb 5, 2011

We have just installed the 11.3 version of opensuse in a Dell Poweredge T610 with 8 Gb in RAM and two (2) Xeon Quadcore proccesors. Well, the first time the Opensuse resets the computer, after the installation (it was fine, w/o any problem) the system goes frezze showing a screen which reports a BUG ERROR in the Kernel code, specifically:

Kernel bug at /usr/package/BUILD/kernel-desktop-2.6.34/kernel/timer.c:643
invalid opcode: 0000 [#1] PREEMPT SMP
last sysfs file: /sys/module/thermal_sys/sections/__ksymtab_strings
CPU 11
...
...

After a "button off" reset the machine boots fine and we could finish the configuration of the applications that we needed. We tested the machine by two days and it didn't show again the problem mentioned, and we believe it was a little bug in the installation, but today, the server halts again in the boot process 3 (three) times before it runs again well.We have repeated this installation in other computers, one in a 32 bit version and other in 64 bits version (like the Dell) and only in the last one has repeated the problem, I mean, no problems in the 32 bit installation. Fortunately, this new server is just a replacement for an old machine, that is running with the 10.3 version. Perhaps, does we continue using the 10.3 instead of the 11.3 meanwhile it is deputed?

View 1 Replies View Related

Ubuntu :: Lucid - Out Of Memory In Seconds After Booting Kernel

Sep 4, 2010

Why my 10.04 install runs out of memory when it has hardly had chance to load the kernel. The symptoms were that it sometimes will hang after the grub screen with a blinking cursor. My user space splash screen doesn't appear either, it was when I was trying to fix that that I spotted the problem:

from my dmesg file:
Code:
[5.778823] lowmem_reserve[]: 0 0 24846 24846
[5.778829] HighMem free:3204284kB min:512kB low:3852kB high:7196kB active_anon:192kB inactive_anon:256kB active_file:596kB inactive_file:2288kB unevictable:0kB isolated(anon):0kB isolated(file)
:0kB present:3180408kB mlocked:0kB dirty:0kB writeback:0kB mapped:1240kB shmem:144kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:356kB unstable:0kB bounce:0kB writeback_
tmp:0kB pages_scanned:0 all_unreclaimable? no .....
This is a few seconds after loading the kernel.

View 9 Replies View Related

Ubuntu Installation :: Booting Fails After Update To Kernel 2.6.34?

Sep 21, 2010

I recently got the Message, that i should do a partial System Upgrade. It included an update to Kernel 2.6.34. Since this update, i cannot boot with this kernel:

Code:
Mounting none on /dev/ failed...

i can still boot with older kernels, but many drivers including wifi and graphics drivers dont work there anymore.

View 3 Replies View Related

Ubuntu :: Retrieve The Kernel Information From Other Distros Without Booting Into Them?

Mar 8, 2011

I know that I can get information from my running kernel using the uname command.My question is, how can I retrieve the kernel information from the other distros without booting into them?For example, I have Debian installed on /dev/sdd1 with two kernels in /boot. How do I go about getting the information from these kernels similar to what uname gives?

View 1 Replies View Related

Red Hat / Fedora :: Can't Boot 14 Error 8: Kernel Must Be Loaded Before Booting

Mar 27, 2011

I Installed Fedora 14 about 2 weeks ago and was just settling into using it more or les permanantly and had to turn of the power to do some maintenanace. When I rebooted I got the grub> prompt. As I have already shut down and rebooted several times over the last couple of weeks, I could not se why this happened, so I rebooted and stiull got the same problem. Things I have tried:

[code]...

I am currently using a 64 bit ASUS P75P55-M motherboard.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved