I am trying to install ubuntu-10.10 from usb drive. I downloaded the ububtu-10.10 from.[URL]..But after I select that I want to install ubuntu on hard disk, following error creeps in..
Code:
GLIBC-WARNING-Unknown userid(0)
I had to replace my hard drive, so now i have a new blank hard drive that i set partitions and formatted but when i try to load ubuntu from cd i burned(which i checked and downloaded correctly) it stops at the check hlt. i tried ALL the option settings, and still no good. it either restarts or gets stuck at that point again. am i doing something wrong? i can install ONLY ubuntu as my os right? like i said there is nothing else on hard drive-blank.
View 5 Replies View RelatedI realize Ubuntu Desktop comes with a simple tool that makes "installs to a USB", but isn't that a bit different from REGULAR Ubuntu installation?
So: If I boot the Ubuntu CD installer, and choose my Flash Drive as the destination, will it configure things specific to the hardware I am running on, so when I swap the flash drive to another system, there will be problems?
BTW, I've actually done this a couple times and it's worked, but I'm just wondering if those were flukes or if it is like this always.
My hard drive does not have enough space to install UBUNTU.I have an external USB hard drive.
View 2 Replies View RelatedI am running Windows XP on my PC. I installed a new SSD Drive, which is OCZ-VertexII 120GB. I would like to run Windows and Ubuntu 11.04. The Ubuntu 11.04 Live-DVD runs fine, but when I click on Install, I get to the Screen where it ask if I want to install Ubuntu Side by Side with Windows or want to replace Windows, Ubuntu does not recognize the second SSD-Drive. how to install Ubuntu onto the second SSD-Drive and install the Boot loader onto the First Hard-Drive?
View 2 Replies View RelatedI just ordered a 60 G SSD drive which I am going to use as my OS drive to replace the drive below. Can I just use DD to switch ?
dd if=/dev/sda of=/dev/sdb (New Drive)
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000a1a0c
Device Boot Start End Blocks Id System
/dev/sda1 * 1 89723 720693248 83 Linux
/dev/sda2 89723 91202 11878401 5 Extended
/dev/sda5 89723 91202 11878400 82 Linux swap / Solaris
I bought a new hard drive. I thought it would be clever and SAFE to install Ubuntu on the Hard Drive so that would not interfere with the internal hard drive on my laptop. It worked fine until I disconnected the hard drive. I got the "Grub Error 21" when I installed. I know how to get around it, unfortunately, I have to lug around this hard drive whenever my computer sleeps or restarts. I would like to be able to restart and boot into Windows without my hard drive connected. Is this possible?
View 3 Replies View RelatedSystem: Linux flashvoyager 2.6.32-23-generic #37-Ubuntu SMP Fri Jun 11 07:54:58 UTC 2010 i686 GNU/Linux Ubuntu 10.04 Installed onto 64gig Flash Voyager GTR plugged into Tosh satpro laptop dual core 4 gig memory. This is not a casper r/w persistent install version. This is installed directly onto the flash pen and running as if the flash drive was a solid state disc.
I have obtained a 64gig which can read at 34mb/s and write at 28mb/s. The reason I wanted this was so I could install linux ubuntu and run the OS straight of the flash as if it was a Solid state disc. I have tried using the pendrivelinux method where the persistent data is stored inside a virtual file system but I found it did not allow grub or kernel updates without the need to rebuild the entire datapen plus I did not know how to get rid of the live boot menu where it asks for language and the like.
I boot the pen straight into linux ubuntu 10.04 via the bios boot menu and select the usb pen drive. Once into grub I select the most recent kernel and then load up ubuntu. When I first started using the distro from the pen the speed of the web browsing was so slow. I have since configured the browser to store the cache inside tmpfs /media/ramdisk and browsing seems fine now however there is underlying speed issue with using the method of install. Uncompressing installs takes an age. I have configured fstab like so:
#System
proc /proc proc nodev,noexec,nosuid 0 0
/dev/sdb1 / ext4 errors=remount-ro 0 1
[code]....
PS: I am not allowed to use the HDD on the laptop since it is company laptop. My previous company laptop had Kubuntu 8.04 with XP as VM. Also having the install on the flash drive would give me the convenience of booting the pen from any hardware.
I have Linux mint 8 iso and would like to install it on an Asus eee machine, for light web surfing and perhaps a movie only. I have istalled Linux mandrake once ages ago and red hat once too. The only other machine I have is a bigger netbook on vista, if I can get Linux working on the smaller then use it on my bigger machine too. Is it possible to use an USB HSDPA modem using mint on this netbook?
View 2 Replies View RelatedHaving problems installing Xubuntu 9.04 to my Dell Latitude CPi (old, I know, but available...). Problem is that the CDROM is not working right and the BIOS doesn't support boot from USB so I can't do a complete live CD install via the CDROM or USB.What I'd like to do instead is install the ISO to the HD and run the install from that HD. Even with the CDROM problems I am able to load the Live CD installer from CDROM.
With that I think the best option will be to extract the ISO files to the HD (attach to another computer and extract to a FAT32 partition, then replace HD back in the latitude) then direct the liveCD bootloader to find the install files on the HD. Unfortunately I don't know the necessary commands to pass to the bootloader.
how to install linux RHEL5 from Bootable USB Pen drive.
View 1 Replies View RelatedI want to install Puppy on laptop HD. When I run the Universal Installer and select GParted it brings up the Hard Drive (SDA -ATA Toshiba MK6015MA 5.595 Gib) is on Old Compaq Presario 1200. I'll select that drive and hit ok it just takes me back to the Universal Installer Screen. When I first started the Hard Drive was listed and somehow I must have removed it. Is there another program where I can select the HD and partition it etc.
View 1 Replies View Relatedi can only boot to MSDOs with floppy msdos bootup on A:. I want to install ubuntu 10.10 and completely erase HDD but the ubuntu disc won't bootup even when bios is set for cd only. This is older HP pavillion that I have retired but HDD scans out good so I thought i would run Ubuntu only and maybe put MS out of business but not having any luck with install. When booting from HDD error is system 32hal dll is missing or corrupt but HDD C: is 0 anyway. I just want to install so I can play with Ubuntu.
View 14 Replies View RelatedI recently had a laptop die on me. I, of course, then to recover the hard drive. I wanted to install slackware to a partition on my drive, so I can have a linux distro with me( also I have a FAT32 partition for shared space) I have a Slackware 13.1 disk one (which i need, since I don't need a graphical environment or anything), and proceedd to follow setup program. I have a 5GB '/' partition, a 10GB '/home' partition, and a 2GB swap partition. My ROOT partition is bootable. The setup program seemed to complete succesfully, but it won't boot. When I choose to boot from my hard drive (in the bios), it reverts to the slackware disk, if present, or the standard windows drive.
I installed LILO to the superblock of my external, because according to the setup the MBR option installs to "The MBR of your first hard drive", and I wasn't sure if that was right, since my first hard drive is my windows one. Since i'm not even seeing LILO, I think it has to do with installing to the superblock. I want to be able to boot a basic linux distro if needed from whatever computer I want. I'm not sure if slackware was the right choice, but it was one that I had worked with installing before, and knewthat you didn't necasarraly have to instal all the graphics stuff. I just want a shell. Sorry if my question sounds retarted, I'm new to the whole "Multiple drives, and operating systems" thing
Windows XP is installed in my C drive. Can I install an another fresh copy of Windows XP or Linux or Windows 7 in same C drive without formatting the previous one?
View 4 Replies View RelatedMy PC has been blue screening since yesterday, and I can't boot into Windows, which the rest of my family needs. I tried to repair from this live CD, but to no avail. If I had a XP Install disk, I'd be OK, but... I don't. I've read around, and it seems that I just need to run chkdsk, but that doesn't run under Linux, and there is no program to do the same under Linux. install and run chkdsk from a USB flash drive?
View 6 Replies View RelatedI have just moved from Windows Vista to Ubuntu about a week ago. Ubuntu is on my old c:drive...no windows at all. Can I install a different flavor of linux such as Fedora, Mandriva, etc to a separate external hard drive so the I can evaluate different ones?
View 3 Replies View Relatedhow do i format a hard drive in order to install linux,The following errors are displayed during installation:"VolGroup01" not found followed by could not find filesystem '/dev/root
View 2 Replies View RelatedI bought a Samsung N150 netbook with the idea that I would install Linux on it.Now that I have it, I learn that it will *only* boot from the hard drive. there any Linux distribution that can install itself on this machine? Preferably in a separate partition allowing boot to either Linux or Win 7.This needs to be a high confidence installation, because if the existing Win 7 installation is screwed up there appears to be no way to recover.
View 14 Replies View RelatedHow to do a clean install onto a newly formatted drive
View 3 Replies View RelatedI have an Intel Core2 Duo system that I want to upgrade from Fedora 12 to Fedora 14. I have downloaded the DVD iso for Fedora 14, however, I do not want to burn a DVD for installation, and would like to be able to perform the upgrade from a USB flash drive. Where can I find information that will explain how to make a bootable flash drive that can install Fedora 14?
View 14 Replies View RelatedHave older system, self-built around 2000 or so. My plan is to optimize the system for speed and utility, upgrade the OS from W2000 Pro to XP Pro, and include dual boot so as to install some version/distro (?) of Linux to learn on. Present system: X86 based (32 bit), using a P4, 1.8 GHz/400 MHz fsb, with 512mb of DDR RAM installed, can upgrade to 2 gigs total.Shuttle MV42 motherboard, including onboard video and sound (S3 Graphics ProSavage DDR P4M266/VIA 8751/8233 chipset, VIA AC'97 Audio Controller, 2.2 compliant)
If I should decide to use the available 160 gig drive as a dual boot system, in order to install both XP and some version of Linux, how should I set it up? How many partitions will XP and Linux need or work with best? How much space for each OS? What file systems? Should I format/partition it with the existing W2000 OS? What comes first, the chicken or the egg? (XP or Linux?) I have read somewhere that it matters which OS is installed first, due to boot records being overwritten by successive OS installs. I plan to keep W2000 on the first HDD at least until I move my files over to XP. Will I need to switch the master/slave designations after installing XP and Linux on the new drive, since I will want to boot from that drive?
how to install lexmark c912 printer drive in my system .i have cd for drive but how install it from my cd
View 2 Replies View RelatedMy Toshiba Satellite 5205-S705 laptop with Win XP Home sp3 has a non-working cd drive, is riddled with viruses, and isn't capable of booting to a USB drive. (please no comments about paperweights etc., it's all I have!) I want to install a Linux dual-boot version that is heavy on antivirus scanning support. Since I can't boot to an .iso disk, is there any other way to do this? I can transfer files to it via USB thumbdrive or download via Internet.
View 9 Replies View RelatedI am trying to install slackware on a drive connected to an adaptec ide controller. on bootup controller is found and installed. but how do i find this drive on setup program.
View 1 Replies View RelatedThe software: Ubuntu Server Edition 9.10.The wetware: A programmer doing his best (read: ignorant, shitty) as an ad-h.When I plug the USB thumb drive in, the install OS gives it a drive letter -- /dev/sdb -- and it pushes the original /dev/sdb down to /dev/sdc. The installation works without a hitch, and GRUB2 installs, dutifully pointing the root at /dev/sdc1 instead of /dev/sdb1.I let GRUB2 start normally ("drive not found"), holding the <shift> key to get to the "rescue>" prompt.From there, I issue "ls" to discover that GRUB can NOT see /dev/sdb, and I can tell that because what is showing up as (hd1) does NOT have three partitions as it should.GRUB2 sees a total of 16 drives, not 26, and one of the drives it sees is "fd0" (there is no floppy drive).Issuing commands like "set prefix=(hdx,y)" and "root=(hdx,y)" have no effect as, I think it's just pointing to the (reiserfs)content drives and this GRUB2 tells me "unknown filesystem".I did try them all in vain, hoping that maybe I'd find a kernel somewhere.I used the "rescue" mode of the Ubuntu installer (the USB thumb drive) to get to a root prompt.From there, I mounted /dev/sdc2 (the "shifted" /dev/sdb2) onto /mnt, I mounted /dev/sdc1 (the "shifted" /dev/sdb1) onto /mnt/boot,and then I chroot'ed to /mnt.I edited /boot/grub/grub.cfg, editing every instance of "root=(hd2,1)" to the appropriate UUID for the "real" /dev/sdb1. Then I issued update-grub2.It refused to work giving me an banal "no such partition" error or something like that.
We originally had this server functioning by putting / and /boot on the SS SanDisk, which caused no problems during installation because /dev/sda doesn't get shifted.We then figured it was a good idea to put our OS files on something with failover capability. And that started us down this crappy "shifting drive letter" path.Can I control which drive letter the USB thumb drive gets assigned during the install process?If I could make it be /dev/sdc then I wouldn't be facing this problem.An alternate solution would be to know the cryptic GRUB2 commands that I can issue from the command prompt post-install, pre-reboot.But I'm wondering if that will ultimately work at all considering that GRUB2 couldn't see /dev/sdb at all.
I want to install Linux Mint 11 (just came out) to a USB drive. My USB drive is 34 gb. So I want to put a 1-2 gb partition on it and install mint just to that. Is that possible? I am a noob so I want to use [URL] but the screenshots don't show an option for a partition or state any extra steps that might be involved in doing this (there's a tutorial for doing this for one of the Ubuntus using fdisk, but I don't have any linux installs right now).
I've seen several tools for partitioning.
I have already installed Ubuntu from an USB drive, however everytime I have to install it on a desktop/laptop or netbook, I have to "burn" the USB again, so I wonder if there is any way to have both (Ubuntu desktop and Netbook Edition) on the same USB drive and choose wich one you want to install at the boot moment.
I usually have the ISO images and copy the files to the USB with the "Startup Disk Creator" utility built in Ubuntu or eventually with Universal USB Installer or UNetbootin...
I just installed Debian onto a PowerPC G4 Tower with two hard drives. I left OS X on one of the drives and reformatted and installed Debian on the other, using the installer from the 60Mb ISO from the Debian website.
The installation had no issues and it starts yaboot and Debian no problem.
After about 2 minutes of the booting up process, it starts to output this, every five seconds:
While this happens, other things still continue load and it outputs occasional messages and even gets to "Debian Login:" where if you type really quickly and hit enter, it takes it and prompts for "Password:" right after the next round of the above messages.
I have not been able to completely log in yet.
I can start up into the shell as root with "Linux single" with no problems.
I think this might have something to do with the second Mac OS Formatted Hard drive. I have considered unplugging that drive and testing it that way, but I am looking for a solution to turn off whatever script is running that every five seconds and failing, regardless of what it is trying to do.
I wanted to install a Linux distro to a flash drive so that I can have a portable OS with all my settings, programs, etc. wherever I go. So I fired up a Linux Mint Live CD and installed Mint to the flash drive, and this seems to work OK. But now, whenever I try to boot up my system normally without the flash drive plugged in, it doesn't seem to work. It basically hangs for a bit, and then I get the following prompt:
However, when I try powering my system up when the USB is plugged into the computer, it gives me an option between using the OS installed on my USB and the OS installed on my HD. Selecting the latter, everything loads up just fine. I'm guessing that installing Mint to the flash drive somehow messed with my native Grub installation.