within my bobje directory, I have many directories and some log files . I want to delete those log files without traversing the subdirectories. so i performed these commands and getting the mentioned errors.
[Code]....
Back in the old days of PC-DOS 3.1, computers are much simpler than today's. I can learn a lot of how File System works with tools like PCTools, Norton Disk Doctor, and [URL]. Have been working exclusive in corporate database application area for over a decade, my knowledge of how these stuff work is diminishing. Standard-clean OS (Windows, Linux) installation is all I can do now. And it starts to cause me many data-loss troubles, when I have to perform something that I don't have much insight, such as install and remove peer linux os or move and resize partitions.
I'm looking for books, web resources, or communities where I can educate myself on how various file system works, for which I can have in-depth answer to questions such as:
How to remove ubuntu and grub2 ? (I recently did that, but with a lot of frustration when I was not really sure what I was doing and confront with some scary error message like "Missing BootMgr" What kind of disk-partitioning operation can be performed non-destructively, and why ? What is Active partition ? Primary Parition ? Extended Partition ? How it stored on the disk. There are many free partitioning tools out there, which one is safe to used ? NTFS, Ext3, Ext4, .. What the differences ? How to choose it wisely.
Is there a way to execute some command and then after the command completes utomatically reboot the system and then after the system reboots execute another command ? For example look at the sequence shown below(1) Execute command-1(2) After the command-1 in (1) is completed,reboot the system (3) Execute command-2(4) After execution of command-2 reboot the sytemIs there a way i can automate this process so that i need not reboot the system manually
View 5 Replies View RelatedHow can I search to a certain folder depth using find ?
View 1 Replies View RelatedI have a script which builds a project and then runs junit tests. However, if the build fails, the junit tests fail with the same error message.Therefore the command which runs the junit tests should only be executed if the build was successful.
View 3 Replies View RelatedI'm trying to send the results of a command line $du --max-depth=1 to a zenity message box.I want to create a .sh script that I can run as a Nautilus script that will open a zenity message box with a listing of sub-folders/sizes. $DU with options, will provide the results in a terminal window, but I can't seem to get it into a zenity message box. I've tried gxmessage also, but no go.
View 2 Replies View RelatedI'm trying to run multiple commands on things I have found, how can I achieve this? find . -exec cmd1; cmd2 does not seem to work; it instead runs cmd2 after cmd1 has been executed on every file.
View 2 Replies View RelatedI want a quick and simple way to execute a command whenever a file changes. I want something very simple, something I will leave running on a terminal and close it whenever I'm finished working with that file. Currently, I'm using this: while read; do ./myfile.py ; done And then I need to go to that terminal and press Enter, whenever I save that file on my editor. What I want is something like this: while sleep_until_file_has_changed myfile.py ; do ./myfile.py ; done
Or any other solution as easy as that. BTW: I'm using Vim, and I know I can add an autocommand to run something on BufWrite, but this is not the kind of solution I want now. Update: I want something simple, discardable if possible. What's more, I want something to run in a terminal because I want to see the program output (I want to see error messages).
How do I set up SSH so I don't have to type my password? i execute the following command ssh -l admin hostname command but each time i execute it, it ask me to enter password.how i can give it password as default because i'm going to put in bash file ?
View 2 Replies View RelatedI am working in a CentOS environment with numerous CentOS machines. Currently there are multiple developers that each have their own login/home directory and then for various admin tasks we all share a single super user account.
The problem
I have a number of aliases, variables, functions, and settings that exist in my personal login's .bash_profile. None of these are available in the shared super user's .bash_profile. My current work around is that everytime I sudo in as the super user and I re-execute my .bash_profile from my personal user's home directory. I am not allowed to edit the init stuff for the super user
The Question
Is there any way I can automate my sudo sequence such that it will execute my personal .bash_profile after I've executed sudo without requiring me to edit the super user's bash init stuff?
When i click in one icon (for example), this icon executes "java -jar ...". In another words: Make a .exe on linux.
View 2 Replies View RelatedTop: error while loading shared libraries: libproc.so.2.0.6: cannot open shared object. I am not able to execute top and ps command.
View 6 Replies View RelatedIs there a way to execute top command once and exit...i.e. stop refreshing window and continue console without pressing 'q' or 'ctrl+c'...
View 3 Replies View RelatedMy problem is:
sub init() {
$Test->description("Establishing the connection to the client");
eval {
$Host = host($CLIENT) or die($@);
$Conn = connect("#ssh") or die "Client connection Failed" . $@;
};
if ($@) {
$Log->error("Unable to instantiate the Objects for the Test" .
[Code]...
Here I'm trying to connect windows machine using connect object which is working fine. But when I tried to execute the command on Windows machine from Linux machine by using:
[Code]...
I am having trouble getting the while loop to execute in the ssh command:ssh $USERID@serverX "while read line do echo $line done<$list_dir/cost_feed.lst.old"Error:bash: -c: line 1: syntax error: unexpected end of fileI have managed to use simpler commands with ssh like:ssh $USERID@serverX "pwd; cp x y"I expect that I need to add some combination of escape characters or semicolons
View 3 Replies View RelatedMy laptop has a dead battery. Even when it's fully charged, if the power cable is pulled out it only lasts for about 4 minutes before it dies. I'm running Ubuntu Lucid Lynx 32-Bit. What I want to do is create some sort of script or program that will immediately set my computer to go into hibernation once it detects that the power cable has gone dead. I'm willing to look into all ways of doing this. I can program in C, but I'm not familiar with the API used to manage Power Management in Linux.
[Code]...
On my ubuntu I have a command pm-suspend, which puts the computer to sleep. It has to be run with sudo. Since it is inconvenient to be forced to type the password every time I want my computer to sleep, I thought maybe there's a way around it. Naively I thought that if I'd create a script as root, that invokes pm-suspend, and then let anyone execute that script, I could run that script as my own user and then that script would be considered run by root and hence be allowed to run pm-suspend. Obviously that didn't work. The root-check procedure in pm-suspend still found out that the original executor was someone different from root.
Still I think something similar (although slightly more elaborate) should work.I'm thinking about the process that allows the user to mount hard drives for example. Normally root is required, but it is somehow bypassed by the gnome utility mounting.
How can I give execute permission to chmod command from run level 3.Because in GUI mode we have the execute option in the properties of file. E.g. I gave following command
chmod -x chomod
After that I want to give the execute permission (x) to chmod command again but how from command prompt?
Is possible (by root of course) to run a command from console, that will be executed on X-session owned by another user on the same linux box/machine ? Example: Can root open xclock for another local user logged into X11 ?
View 2 Replies View RelatedI am working at a client who has a project where code is a mixture of different source control systems. So a layout might be like this
project/a/.svn
/a/subfolder/.svn
/b/.hg
/c/subproject/.svn
/d/.hg
So I am trying to put together a simple command that when executed from the project folder will run the appropriate hg/svn command in each project i.e:
[Code]...
Since the client has many such projects, Instead I am looking for a solution similar to find -exec where the svn/hg commands are automatically executed on each first level of match (i.e. svn up is run in the project/a folder but not in project/a/subfolder). How can such a command be constructed ?.
I just want to know that how can I execute my scripts (example.sh) files like other normal commands from command-line. Please describe the full method
View 5 Replies View RelatedI am trying to setup a system to allow normal users to execute a command without using sudo. Is this possible?
View 6 Replies View RelatedCommand to compile n execute a Fortran program on a Linux machine
View 6 Replies View RelatedI need a script that executes a command based on a folder's last modified time.
if "/var/data" was modified in less than an hour then "/usr/local/etc/searchd stop" should be run
can we use "find -mmin +60 -type d" in conjunction with second command
I have 4 Linux machines with cluster.My target is to find all kind of IP address (xxx.xxx.xxx.xxx) in every file in the linux system remark: need to scan each file in the linux system and verify if the file include IP address if yes need to print the IP as the following
more /etc/inet/file.example1
182.23.2.4
255.255.0.0
10.10.1.1
I am trying to do a find/grep/wc command to find matching files, print the filename and then the word count of a specific pattern per file. Here is my best (non-working) attempt so far:
wc `find . ( -name "*.as" -o -name "*.mxml" ) -exec grep -H HeightResizableList {}` ;
Is there a way to specify to find that I only want text files (and not binary files)? Grep has an option to exclude binary files, so I thought find probably has a similar feature, but I've been unable to find it.
View 2 Replies View RelatedCode: cmd='date | wc'
$cmd If this script is executed, an error is generated. The reason written was that "The execution fails because the pipe is not expanded and is passed to date as an argument".What is meant by expansion of pipe. When we execute date | wc on the command line, it goes fine.then | is not treated as an argument. Why?
I know how to search for normal files but can you let me know " How to search for 5 setuid files on the system. Also explain, for each file, why setuid mechanism is necessary for the command to function properly"
View 1 Replies View Relatedam new to linux and trying to find a file in sub directories using find command as:find .-name *.jpg -type fBut I am unable to get the result as find command is not permitted by the server administrator.Is there any way to find files without using find command.
View 14 Replies View Related