i have Dell notebook XPS M1330 and i've been trying to install ubuntu, but before i get far i get an error message "tty; job turned ff (initramts" ;( and so i've tried browsing through some forums, some says it may be due to optical drive issues, some kernel. is it possible if i could copy the cd files to my flash drive and boot the installation from there (my flash drive?)?
View 1 RepliesThis is the difference in the output of a port scan using Zenmap on the same system with UFW turned off and then with it turned on. It is obvious that UFW works.
View 6 Replies View RelatedThe wireless connection works fine. The wireless switch automatically turns itself on every time I start the computer. However, after turning it off, I can't ever turn it on again unless I restart the computer. And because of this, the wireless connection is disabled until the next time I start the computer.I don't think this is a hardware problem because the switch can be turned on and off, although not in the way I expect.
I'm using ubuntu 9.10 on an Acer Aspire 4740G. The command [lspci | grep Network] shows Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01). the [rfkill list] command shows (when the switch is on)
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
and, as expected, shows (when the switch is turned off)
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
I just want to be able to turn the switch on or off at any time I want as long as the computer is still on.
Hi I am running a fedora 10 desktop. when i send an email using evolution the message was not sent but returns a error message:"Error while performing operation.DATA command failedError: 550 Viagra SPAM - Hi in Subject" and the message did not have an attachment just plain words. what might have gone wrong for i have been using this for sometime without a problem. or what security measures should be in place to remove this viagra spamAm I infected by virus on this fedora, all my updates are up to date.
View 1 Replies View RelatedIm trying to instal Sun Virtualbox but when download completes and I click on install I get the following error>>Message did not receive a reply (timeout by message bus) I wont even bother with this software if there are others out there that are as easy to use. I used it on Windows and thought it was great ! (thats how I eventually switched to Linux, by using it virtually at first)
View 5 Replies View Relatedi have been using windows xp and ubuntu simultaneously for more than one year and everything was working fine.Recently, i have just installed windows 7 and this has wipe out the ubuntu os selection screen (GRUB) and windows 7 boots in automatically.Moreover, while trying to install ubuntu again, i get the following error while booting the ubuntu cd:/bin/sh: can't access tty: job control turned off
View 1 Replies View RelatedUsing IMAP to retrieve emails in Evolution is not working correctly. Some messages are recieved, others are not. Those messages that cannot be recieved, reports the following error message: Unable to retrieve message
Running the following;
evolution 2.28.3-0ubuntu10
Ubuntu 10.04.1 LTS
2.6.32-26-generic
My issue is with my Fedora 9 virtual machine that is running a Scalix mail server (host is F12).
The F9 VM was running fine until this morning when for no reason it crashed as I attempted to initiate a realVNC connection with it.
After a reboot users were unable to send mail to external addresses. When I try to check the network settings by selecting "System" -> "Administration" -> "Network", I receive the following error message:
Code:
Often when I run an upgrade to install new software or copy-paste instructions on commands on the terminal, I am getting the following error message:
error processing crossplatformui
What does this mean? I've been looking for codecs for video lan.
While installing linux, i got error message when i tried to create LV for /boot... i checked with my friends n they told me that /boot should be a standard partition... why is that, i asked them but they had no good explanation for it... could someone please explain me why do we create standard partition for /boot, why can't i use LV??? also i heard that its good practice to create separate partitions (LV or standard) for /, /home, swap & other major directories instead of 1 partition for all these.
View 7 Replies View RelatedError message: GLIBC_2.0 not defined in file libc.so.6 with link time reference. What can I do?
View 1 Replies View RelatedWhen I am compiling from the src, I run the ./configure script. While there might be error sometimes, I 'd like to ask, what're the 3 stars( ***) in front of the msg stand for? Do they stand for critical errors?
View 9 Replies View RelatedI am quite new to Linux, so bear with me if I ask silly questions. For homework (and fun) purposes I needed to create a bootable USB of Fedora12. Which I did, successfully I might add However, when I rebooted the computer, I got this puzzling error message code...
What have I done wrong here?
I just installed wine in an attempt to open .exe files. When running the code line /wine/file.exe the following message appeared: wine: Install the Windows version of Mono to run .NET executables. I tried out two things, both of which didn't work and the message still appears every time I try to use wine
1st: yum install mono-core.i686 It is the Mono CIL runtime, suitable for running .NET code. 2nd: downloading mono windows version from the original website but still couldn't install it because it is an .exe file
When i am typing in the following command:
fdisk -l > ~/fsLabLog
i get a error message
disk /dev/dm-0 doesn't contain a valid partition table.
disk /dev/dm-1 doesn't contain a valid partition table.
I am migrating an application from HP-UX to Redhat Linux and I have some files of scripts. In one of the script files I have the line /pylive/smartPAY/spserver/scripts/sp.con which is the correct path and file name for an existing file. However I get the message "No such File or Directory/pylive/smartPAY/spserver/scripts/sp.con" The script worked fine in HP-UX, why not in Redhat Linux?
View 6 Replies View RelatedOur websever, Linux Debian with mysql, apache2, php 5 went down this saturday. Now this monday morning i must find out why this happened. I am looking for the the correct log files. We know that the server was available by using ping so it is (was) an application failure. We know that the our apache support team had changed the php to improve performance to apc.shm_size=192M (a couple a weeks ago) because couple a weeks ago we got a "Unable to allocate memory for pool" error message. Our server is running on a Vmware Server version 3 as virtual machine with sufficient CPU and RAM resources. Where and which log files must be checked to avoid future download times (it is our Company web page!!!!)
View 5 Replies View RelatedThese days, I tried to compile my own kernel. Now, it seems work. However, when the kernel is booting, I always get the error message like below:
acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
It looks that something is wrong with my acpi subsystem's configuration. But no matter How I reconfig it, this message still occurs.
My distribution is UBUNTU 10.04 LTS
original kernel with the distribution is 2.6.32
My own kernel is 2.6.35
solve this error "3c501 device eth0 does not seem to be present, delaying initialization".
View 3 Replies View RelatedOn close down of kde4 I get the following error message;'Waiting for X server to shutdown kde4: fatal IO error; client killed error setting MTRR (base=0xf0000000, size=0x04000000, type=1) invalid argument (22)Because of this error I am currently closing down using "shutdown -h(-r) now"Could I please have some help on correcting the error.I have only a meagre experience with linux having only dabbled with it over the years
View 1 Replies View RelatedI installed Kubuntu 10.04 last couple days ago. Yesterday I installed some package software. After reboot, I had problem to login in GUI in Kubuntu. I tried few solutions in web I found,
Now It became more worse ! After BIOS - show this error message
error : unknown filesystem
grub rescue>
When I try to download the recent adobe flash 10.1 for my linux drive, I get the following error dialog box:
cannot get lock
cannot get the exclusive lock on the packaging backend. Please close any other legacy packaging tools that my be open.
Yum is locked by another application. The other process has the command line '/usr/bin/python /usr/share/yumex/yum_childtask.pyc 2 True False' (PID 2053)
I'm at a lost right now, I tried researching to find a possible reason, but I'm coming up short. I have a dual boot laptop with both fedora core 12 and windows7. Could there be a conflict between the two drives? I have the YUM extender on my linux drive performing the updates for me. I tried doing a YUM update via the terminal viewer, but I still get the same message.Any ideas as to why I'm getting this message, or how to fix this problem?
My redhat advance server got error no.15 message
View 1 Replies View RelatedI have two questions.
1- The vfstpd is running on the Centos server. The server is in the same home network. The SeLinux and firewall are disabled. I can use Filzilla from a Windows PC from another computer and connect and see directory listing. There is a user names adminftp and he is a memeber of root group. When I try to upload or download I get an ftp critical error message.
2- How can I install Adobe Acrobat Reader, Flash Player and Adobe Shockwave on this Linux box?
When i try to install zaptel i have received the following error message:
I have already installed kernel-devel.
I downloaded opensuse from opensuse.org(the DVD), and when I tried to install it gave me an error message. When I saw the file on the mirror, it was 4.7 G, but when I burned it, I did notice it was only 4.2 Gs.
I tried another download and again it was only 4.2 Gs, how or where can I obtain a working installable DVD of OpenSuse?
I have installed package tigervnc-1.0.0-3.fc12.i686, but when I am trying to start it: service vncserver start it comes back with following message: vncserver: unrecognized service.
View 1 Replies View Relatedwhile booting with bootsplash turned off there's a message "FATAL: Module ata_piix not found FATAL: Error running install command for ata_piix" .Though everything works fine i'd like to know what does this message mean and is there a way to disable loading of ata_piix whatever it means.
View 2 Replies View RelatedHow can I configure apache2 to show the error message in the browser? Just for the purposes of debugging, I do not want to have to open the server error log every time.
View 1 Replies View RelatedI have gotten an error message to please check that the dcopserver program is running.Where do I look to see if it is running?
View 3 Replies View Related