General :: Difference Between Raid1 And Ordinary Hard Disk?
Jun 8, 2011Is there a difference between raid1 and ordinary hard disk?
View 11 Replies
ADVERTISEMENT
Fedora :: Resync Two Raid1 Hard Disk In 12?
Jun 9, 2010I have two 80 GB IDE hard disk. I have create raid1 partition in both drive using [URL] ink. raid is working fine. But i have copy some data on one hard disk (md0) but this data is not autometically copy in second hard disk(md1). I want when data is write on one hard disk, this data autometically write in second hard disk.
View 11 Replies View RelatedCentOS 5 Hardware :: Hard Disk Crash / Data Recovery In RAID1 Webhosting Server
Feb 1, 2011We have had a hardisk crash in our RAID1 webhosting server running CentOS5 and Plesk. We first realized something was wrong when our main site didn't load but showed MySQL errors. We then found out that the system was in read-only state. Something that also happened the day before yesterday, but we could fix with a FSCK. Then the system worked well til around 18 hours later when it crashed with the same sympoms. So, we rebooted the server and wanted to do a filesystem check again. But the HDD wouldnt even load. It was gone. Unfortunatelly it was not realized that the second disk in the system was also not working any more for some time now. Fortunatelly we had our main site backed up externally though. So we could re-install a fresh box and mounted the two drives to the system. We checked the harddisk. One is practically empty (the older one), the other has almost only files in 'lost + found' but these are all "numbered", no real filenames or so.
View 2 Replies View RelatedGeneral :: Difference Between Platform Driver And Ordinary Driver?
Jul 14, 2011I am not understanding the difference between the platform driver and the regular driver. How they differ and when to prefer each of this driver.
View 1 Replies View RelatedGeneral :: Raid - RAID1 With Only One Disk
Oct 27, 2010I have a hypothetical situation in which I installed my operating system using a RAID1 mirror. At some point I decided that this setup was overkill, my machine isn't system critical, I value doubling my storage space more than speedy recovery, I'm doing routine backups, etc...
Short of backing up my system volume and repartitioning, or otherwise starting over, is there a way I can reconfigure my RAID1 array to only expect one disk so that mdadm no longer reports a Degraded state?
General :: Changing GRUB From An External Hard Disk To The Internal Hard Disk?
May 14, 2010I had a dual boot (windows 7 + debian), both of them installed in my internal hard disk, with the GRUB in it. I have recently installed a second linux distro (mint), but I put it in an external hard disk. Now the GRUB allows me to boot any of the three operating systems, but I need the external disk to do it. It seems that after the mint installation the GRUB is now working from the external disk (if the external disk is not connected, the machine does not boot.) �Is there a way to change the location of the GRUB, to the internal hard disk of my laptop?
View 2 Replies View RelatedGeneral :: Use Hard Disk Image Like A Regular Hard Disk?
Apr 6, 2010If you have a hard disk image (including partition table, multiple partitions,...), is it possible to let Linux treat it as a regular hard disk?
By "regular hard disk" I mean I would like to have the image show up as, for instance, /dev/hdx and its partitions as /dev/hdx1,...
(I know I can mount one of the partitions in the image using "mount -o loop,offset=x ..." but I don't really like this option.)
General :: Mount From The Old Hard Disk To The New Hard Disk
Jun 30, 2010mount from the old hdd to the new hdd i mean (Hard disk)
View 2 Replies View RelatedHardware :: Master Hard Disk Error After Installing Ubuntu 8.10 / Hard Disk Died
Apr 8, 2009after installing Ubuntu on one WD 500 GB hard disk and after making mistake and pasting wrong code into Terminal:my OTHER WD 500 GB hard disk that was also in the system (I guess it was "hd1") - died.The problem must be, I guess, I typed wrong code: "hd1,1" instead of "hd0,0".)500 GB (NTFS) of data was on that other (non-Ubuntu) hard disk, and now I can not access it anymore. While booting, system gives "Hard Disk Error" warning and stops.One again: I installed Ubuntu od one hard disk and at the end of instalation I pasted wrong code for GRUB, giving address of another hard disk. Now that other hard disk has error and will not work
View 3 Replies View RelatedUbuntu Installation :: Copy Hard Disk Have 10.04 And Ext4 To 1000 Hard Disk?
Sep 23, 2010I want to copy hard disk have ubuntu 10.04 and ext4 to 1000 hard disk for new 1000
View 2 Replies View RelatedHardware :: Adding Second Hard Disk With Windows To Boot With Grub On First Hard Disk
Jul 7, 2009I have a sata 320 gb with mandriva linux 2009.1 on it.And it is what curently atached to my cpu. It is shown as 'sda' in the partition table.I also have another 40gb hard disk with windows xp installed on it.It is shown as 'hda' in the partition table . Now what i want to do is attach this 40gb hard disk to my pc and configure grub on my 320gb hard disk('sda') so as to boot windows xp(which is residing on the second hard disk,'hda')Can anyone tell me if what im doing is feasible or not? If it is feasible,can anyone suggest me how to get it working. I know i just need to add 2-3 lines to my grub.conf, but dont know what exactly i need to write.
View 3 Replies View RelatedHardware :: Check Hard Disk For Errors. Possible Hard Disk Failure?
Jun 21, 2011I was using Terminal and browsing a directory in my home folder. My "home" directory is located on "/dev/sdb1". When in Terminal I typed "ls" in one of my directories and the output was garbage. The output didn't show the files in the directory. I think it said something like, "input/output error". Unfortunately, I didn't write the exact error down. Instead I rebooted.The hard disk with the problem is:
Code:
$ sudo hdparm -I /dev/sdb
[sudo] password for brian:
[code]...
General :: Difference Between Vfloppy And Virtual Floppy Disk Drive?
May 25, 2010What is the difference between vfloppy and virtual floppy disk drive?
View 1 Replies View RelatedCentOS 5 :: Possible To Add Second Hard Drive To Create Raid1?
Jul 2, 2010The motherboard currently installed on my PC has a RAID Utility (Ctrl+I) at the startup that allow creating RAID1. But I already have a system installed with CentOS 5.4. In order to protect my data, I need RAID1. Can I add another Hard Drive now and have the data mirrored and synced onto both hard drives as if it was in RAID1 right from the beginning?
View 2 Replies View RelatedFedora :: RAID1 - Installing Grub On 2nd Disk?
Dec 7, 2010Just finished installing F14 with RAID1 setup for 2 hdd (SATA''s). Entire drives are mirrored, including SWAP. As I had done in the past, I was planning on installing grub on MBR of 2nd hdd. In prep for this I did the following to locate the grub setup files:
grub> find /grub/stage1
find /grub/stage1
(hd0,1)
[code]....
I was surprised, expected to get (hd0,0) & (hd1,0), not (hd0,1) & (hd1,1)
running "fdisk -l" I get:
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
[code]....
MBR is the first 512 bytes of the drive. Each partition has a boot sector. In my case grub stage 1 is on 2nd partition of sda & 2nd partition of sdb. What i dont understand is how grub stage 1 can be on sda2 & sdb2, since I am assuming that sda1 & sdb1 would be the first partitions of the drives & therefore contain the MBR's. Maybe this might be because sda1 & sdb1 are SWAP partitions?
Software :: Converting From RAID1 To A Single Disk?
Apr 5, 2011I recently had an issue where one of my RAID1 configured drives died on a Debian box. By die, I mean after post, I am presented with a black screen and flashing cursor, nothing more. I booted into a knoppix shell and did:
mdadm --assemble /dev/md0 --run -u <UUID of the only working drive> /dev/sda1
I could then 'mount /dev/sda1 /mnt/' and see all the contents as I should be able to. However, I cannot boot from this device by itself for some reason. I have reinstalled grub 'grub-install --recheck --rootdirectory=/mnt /dev/sda1' #something like that, can't remember the exact --rootdirectory command without the switch. I restarted, with the failed drive unplugged, and again, I'm faced with the black screen, flashing cursor.
Ubuntu :: Hard Drives (RAID1 Via Firewire) Setup Sought?
Aug 14, 2010I searched, and unfortunately all that did was raise my confusion level on this. "Grub"? "mdadm"? "fake"?, S/Wraid? Disk utility? So many options, so little understanding! Relevant stuff (Mostly reported by "Disk utility"):
- Lucid Lynx. PATA host adaptor -> IDE controller -> Maxtor 164GB H/D [I *think* this has Windoze on it, but can't remember!] There's also a CD & DVD drive on this IDE bus. PATA host adaptor -> SATA controller -> Seagate 500GB H.D. - The Ubuntu boot drive, currently a 250GB ext4 partition, 3GB swap and 250GB "unused".Peripiheral devices -> Firewire 400 -> 2 x Samsung 500GB H/D's. These were "stolen" from my Mac Book and are currently a RAID1 Apple array. Everything they contained is safely backed up, and these can be considered as "new" drives awaiting formatting. [It's actually a Buffalo Drivestation Duo, but their site was even more confusing than here.
everything is working wonderfully, but I'd like to use the 2 F/W drives in a RAID1 array - So, eventually to the question: How do I tell Ubuntu to use these drives as a RAID array? It seems I can format and partition etc from disk utility. Do I then use mdadm for configuration? Any other recommendations?
Ubuntu Installation :: Hard To Install The RAID1 Array In Brand New PC?
Nov 19, 2010Like it says in the title, I am thinking it should be this hard to install the RAID1 array in my brand new PC. Here is what is happening. I have two brand new 1TB drives that I am attempting a new, fresh install of 10.10 on (in fact, the entire box is new). I am attempting to use the alternate desktop install so that I can have access to the manual partitioning (which is required to setup RAID 1, correct?).
I tried to use the guide here: [URL]... I followed the steps, but when I got the the very end (after selecting and creating the MDs) I get an error message stating that there is no root file system defined. I went back and checked all the steps and I am sure I followed everything in the guide.
Here are some quirks (not sure if they are bugs or not) In step 5 of the disc partitioning, it says to select the bootable flag and set it to yes (I am assuming). I press enter over that options, the screen flashes really quickly to a progress bar, but then comes back to the options screen and it still says bootable flag is off. No matter how many times I do it is says "off".
Also, and here is the bigger problem I think. - So the guide says to select the free space in each drive and then select Automatically Partition the free space, which I do, and it comes back and looks formatted accordingly - has 975.6 GB ext4 / and 24.6 GB swap swap. No Problem there.
BUT - whenever I do the same thing to the second drive, the partitions on the first seem to disappear. Meaning, it doesn't say free space, and has two partitions listed, but the / and the swap (last items in each row) have moved to the second drive partitions. I am not sure if this is how it is supposed to be since the pictures in the linked guide to not show what it looks like after that. THis is driving me crazy and I have to have it set up in RAID 1 and unsure as to what it is I am missing.
Ubuntu Servers :: Converting Single Disk LVM To RAID1 LVM (grub)
May 5, 2010I have an Ubuntu Server on (8.10) running under Citrix XenServer (though that shouldn't make a difference).
I installed on a single disk:
xvda1 - 200 MB - /boot
xvda2 - 9.8 GB - LVM (ubuntu-base)
The LVM is:
swap - 1.0 GB
root - 8.8 GB - /
I have successfully gotten this converted to RAID1 by adding a new drive (xvdb) and following the Debian howtoforge article [URL]
What I have not been able to do, is get grub working properly.
If I fail xvdb and reboot the system, everything comes up and I can reboot and run.
If I fail xvda and reboot the system, XenServer gives me a bootloader error. i.e.: no grub
If someone has done this, can they tell me what grub commands to run to get a successful boot of the primary disk fails?
Ubuntu Servers :: Raid1 Reads At Single Disk Speed?
May 3, 2011im on 10.10(desktop) and mdadm was v2.8.1 from 2008, very out of date so i tried 3.2.1 -> no change. mdadm raid1 read speeds are the same as single disk. note i used the tests in the disk utility benchmarking tool at first --these showed raid 5 atleast to be much better but when i tried dd reads raid5 dropped off with larger data to almost the same (slow) speed as raid1. compare:
[code]....
using two partitions will be enough to show raid1 performs at single disk speed. I dont really want to use a 4 disk raid0 just to get the read speed i should be able to get with raid1 as i dont really care about the size loss. I would of course use raid10 but i have found this suffers from the same problem (achieve same read speed as 2 disk stripe). So whilst im shocked others aren't reporting this, unless there is some obscure reason why my system would give these results i think raid1 in not behaving as it should.
Ubuntu Installation :: Moving An Existing System Disk To An ICH10R RAID1?
Mar 12, 2011I've read many of the postings on ICH10R and grub but none seem to give me the info I need. Here's the situation: I've got an existing server on which I was running my RAID1 pair boot/root drive on an LSI based RAID chip; however there are system design issues I won't bore you with that mean I need to shift this RAID pair to the fakeraid (which happens to most reliably come up sda, etc). So far I've been able to configure the fakeraid pair as 'Adaptec' and build the RAID1 mirror with new drives; it shows up just fine in the BIOS where I want it.
Using a pre-prepared 'rescue' disk with lots of space, I dd'd the partitions from the old RAID device; then I rewired things, rebooted, fired up dmraid -ay and got the /dev/mapper/ddf1_SYS device. Using cfdisk, I set up three extended partitions to match the ones on the old RAID; mounted them; loopback mounted the images of the old partitions; then used rsync -aHAX to dup the system and home to the new RAID1 partitions. I then edited the /etc/fstab to change the UUID's; likewise the grub/menu.list (This is an older system that does not have the horror that is grub2 installed) I've taken a look at the existing initrd and believe it is all set up to deal with dmraid at boot. So that leaves only the grub install. Paranoid that I am, I tried to deal with this:
dmraid -ay
mount /dev/mapper/ddf1_SYS5 /newsys
cd /newsys
[code]....
and I get messages about 'does not have any corresponding BIOS drive'. I tried editing grub/device.conf, tried --recheck and any thing else I could think of, to no avail. I have not tried dd'ing an mbr to sector 0 yet as I am not really sure whether that will kill info set up by the fakeraid in the BIOS. I might also add that the two constituent drives show up as /dev/sda and /dev/sdb and trying to use either of those directly results in the same error messages from grub. Obviously this sort of thing is in the category of 'kids don't try this at home', but I have more than once manually put a unix disk together one file at a time, so much of the magic is not new to me.
Server :: Mdadm Software Raid1 Failed Disk Detection Too Long
Jul 22, 2011I have SLES10-SP3 running on an Intel SR1600URHS board with 3 hot-swap SATA disks configured using mdadm as Raid1 with hot spare. If I pull one of the active disks, all file i/o will stop for about 2.5 minutes after which it will start again and the raid array will be rebuilt using the spare disk. Is there any way I can reduce this 2.5 minutes of inactivity? I've tried setting /sys/block/sdX/device/timeout and /sys/block/sdX/device/retries to 1 for all disks, but this hasn't made any difference. The output from messages is:
12:11:56: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
12:11:56: ata2.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0
12:11:56: res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
[code]....
Hardware :: Raid1 Mdadm Repair Degraded Array With Used Good Hard Drive?
Jun 27, 2009I have a used but good harddrive which I'd like to use as a replacement for a removed harddrive in existing raid1 array. mdadm --detail /dev/md00 0 0 -1 removed1 8 17 1 active sync /dev/sdb1I thought I needed to mark the removed drive as failed but I cannot get mdadm set it to "failed". I issue mdadm --manage /dev/md0 --fail /dev/sda1But mdadm response is:mdadm: hot remove failed for /dev/sda1: no such device or addressI thought I must mark the failed drive as "failed" to prevent raid1 from trying to mirror in wrong direction when I install my used-but-good disk. I want to reformat the good used drive first right? I believe I must prevent raid array from automatically try to mirror in the wrong direction.
View 7 Replies View RelatedServer :: Copy Of IBM Server Hard Disk Data To Another USB External Hard Disk?
Sep 1, 2009Copy of IBM Server hard disk data to Another USB External Hard disk?
View 2 Replies View RelatedGeneral :: Semctl:permission Denied For Ordinary User
Jun 10, 2010I'm using ubuntu,i have a bin file under my /usr/bin, if i run the command under root user i'm getting no problem an it works fine,if i try it in with differnent user im getting
Code:
semctl:premission denied
so how can i edit my bin file and change it to right permission
General :: Difference Between Buffered Disk Reads And Cached Reads?
Jul 13, 2011I was analyzing the Disk read using hdparm utility. This is what i got as a result.
Code:
# hdparm -t /dev/sda
/dev/sda:
Timing buffered disk reads: 108 MB in 3.04 seconds = 35.51 MB/sec
Code:
# hdparm -T /dev/sda
/dev/sda:
Timing cached reads: 3496 MB in 1.99 seconds = 1756.56 MB/sec I m not sure what does Cache read and buffered disk read mean.
General :: Best Way To Shutdown Hard Disk?
Oct 6, 2010Right Now I'm using hdparm command in unix to shut down the hard disk but there are few issues with it.
when it wakes back up it consumes
lots power. Is there any other way
to do it?
Many times when I put my
hard disk to sleep, I can see few
bursts at the beginning and then
after a while it goes to sleep. I
think its because of the journaling
system in ubuntu (which I use) Have
anybody encountered that?
What would
be the best linux/unix operating
system (eg: ubuntu/centos/redhat) to
work on extensive hard disk
operations?
General :: Use ATA Security On A Hard Disk?
Oct 28, 2010My SSD HD supports ATA Security. Does Macbook EFI and linux support it? I know hdparm does. Who will do the unlock at each bootup? Can I still set a password without erasing the disk?
Update: removed "SED full hard disk encryption" from the title based on comment by @ataboy. Some might still refer to this ATA security incorrectly as "encryption" however.
General :: Hard Disk Imaging ?
Jan 27, 2011I need to take an image from my laptop hard disk which has Linux SUSE installed , and I want to restore the image to another laptop (which is the same as mine). how can I do this ? in Windows environment , many programs can do this easily , but I don't know how to do this in Linux .
View 5 Replies View RelatedGeneral :: Cannot Write Into Hard Disk
Mar 17, 2010Well appears to be that i have two partitions..one of 300gb i did on windows time ago and one of 100gb where i place my DEBIAN LENNY 5.0, the problem is that i cannot write into it..only i can copy stuff from it.
View 13 Replies View Related