General :: Cant Boot The Slackware 13.37
Jun 18, 2011i have install slackware 13.37 but i dont install lilo boot loader and now i cant boot the slackware. how can i boot the slackware?
View 5 Replies
ADVERTISEMENT
General :: Installing Slackware On IDE Hard Rive Boot From Slackware DVD?
Jan 23, 2010I try to install Slackware to my IDE hard drive and boot first from Slackware DVD. After I loaded huge.s kernel, and tried to partition the hard drive using fdisk by entering "fdisk /dev/hda", I found out that the partition size is max to 3 Gigs instead of 80 Gigs.
I think the kernel is looking at my boot disk, which is around 3 Gigs. How can I make so that it looks at my IDE drive instead at my boot drive? Is there any manual that shows me how to install Linux from scratch this means I want to wipe out all my hard disk and install Slackware Linux there?
General :: Boot Slackware Without A USB Drive?
Jul 31, 2011Background: Before this I was using Ubuntu, but I decided to use slackware from now on. So I installed it using a DVD and using the setup program also formatted a USB drive since it asked if I wanted to. After this I could boot into slackware fine (including getting into KDE with startx) and I can shutdown using halt -r now. When I boot with the USB drive in it says "Welcome to the Slackware Linux custom USB boot stick!".
Problem: If I turn on the computer without the USB drive it goes into "grub recovery". I don't know what I should do if I want to boot the computer without the USB drive. I also don't know why GRUB is coming up because I thought it had installed LILO.
General :: Slackware 13.1 Will Not Boot After Install From USB?
Jul 5, 2010I am installing slackware 13.1 from USB. This will NOT be a dual-boot system.The install appears to work correctly installing to /dev/sda2 (/dev/sda1 is my swap)However I get an error when installing to the LILO to the MBR, root, or even to a floppy drive (I tried all 3 multiple times with no luck)My issues comes when LILO is installing.
After a couple of video warnings I get the following:
Warning: Device 0x0010 inconsistent partition table
CHS address in PT: 15:12:12 --> LBA(230465)
[code]...
General :: Can't Boot Slackware From Fedora's Grub?
May 26, 2011Slackware is my main desktop, however, I decided to give Fedora 15 a try and overwrote the MBR installing it with grub. Now I want to keep fedora and its grub, just I can't get slackware to boot.Fdisk:
Code:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
[code]....
General :: Setting Up A Dual Boot With Win XP And Slackware 13.1?
Nov 13, 2010I am having some trouble setting up a dual boot with Win XP and Slackware 13.1. Lilo lists both Linux and Windows, but when I select Windows, all I get is a black screen. I have two hard drives, sda1 and sdb1. I first installed Windows on sdb1 (it is a smaller, older drive). I then installed Slackware on sda1 and selected to install Lilo on the MBR. I'm guessing that by doing this, I wrote over the Windows information that was already there. Could this be my problem? I feel like this should be an easy fix, but I just don't know where to start in order to fix it. If it helps, here is the end of my lilo.conf file.
# Windows bootable partition config begins
other = /dev/sdb1
label = Windows
table = /dev/sdb
# Windows bootable partition config ends
# Linux bootable partition config begins
image = /boot/vmlinuz
[Code]...
General :: Slackware Automatic Boot And Load?
Jul 26, 2010I've installed Slackware 12.2 on a 12 year old desktop. It is the only OS on the machine. When I press the Power button it stops at Slackware's splash screen asking me to choose an OS, even tho' there is only one to choose from. I installed LILO to the MBR and that is also listed there as a possibility.
Is there a way to set Linux so it will simply load automatically?
Slackware :: Slackware Won't Boot In Dual Boot With Windows 7?
Jan 21, 2010So I got slackware 13 from the website and created 4 partitions (primary) and left some (100GB) space as I planned to install windows 7 in that. After installing slack, when I booted from windows DVD (rtm) in partition section it said I already have 4 primary partition so windows cannot used the rest of space despite the fact that it was free (windows even grayed all options like new partition and format etc. for that space). So I thought I'd create 2-3 primary partition for linux (slackware) so that windows can use the free space and make it a primary partition.
So, Next I formatted with slack (3 partition, 2 Primary, 1 extended, total space for slack 50GB) and after its installation I worked my way with windows, but it just created one partition of 100Gb, won't let me create any saying all primary partitions are created. Anyway, I created that partition and installed windows 7. But it messed up my lilo (slack won't show in boot menu) neither can I create any new partition.
After all I reformatted again created 2 partitions for windows (that actually became 3 as windows 7 create 100Mb separate partition for system). Installed windows correctly. Then I booted with slack , which allowed only creating 1 partition as 3 were already there. So I created 1 extended partition, in which I created 4 partition 1 to mount for /boot (100M), 1 for /swap (3G), 1 for home (10G), 1 for / (35G) everything worked fine till I reached last point to install lilo. At that point it said cannot install Lilo (I tried all options simple, expert, install to MBR etc.) but it just won't install. Anyway, after that it said you can install it manually so I clicked OK. Then it said setup complete, remove disk and press alt+ctrl+del to reboot, which I did. But there is just windows 7, no slack ?
General :: Can't Make Boot File From Slackware ISO / Resolve It?
Apr 12, 2011As part of instructions from Slackware Installation site, I am trying to make a boot file from the ISO (10.2VER). The command given: 'dd if=[image file name] of=/dev/fd0'
Tried image file 'bare.i' and also 'pportide.i'
Error from Red Hat OS: "opening 'pportide.i' no such file, directory" Also tried 'C:>RAWRITE bare.i a:' from WinXP command line with negative result.
Slackware help site:
'http://www.slackware.com/install/bootdisk.php'
I have not seen a command w/ 2 = symbols??
Installing to stand-alone desktop, PATA IDE Controllers. (ISO was copied with process: 'image burned to disk').v
General :: How To Dual Boot, Slackware On Vista Machine
Jan 7, 2010Im trying to setup a dual boot on my laptop. it had vista installed on it and am having some trouble getting slack ware installed. I have gparted live to partition my drive but am not sure if im using the program properly. I tried resizing my HD before and once I booted the slackware cd, it says i have no linux or linux swap partitions installed:S
View 14 Replies View RelatedGeneral :: Partitioning - Dual Boot Windows 7 And Slackware 13.0
Oct 13, 2009My current laptop (purchased off of a local computer store owner, I think it's brand is generic but it is called a SPARTAN for those that need to know) is running windows 7 professional and I am attempting to install Slackware 13.0. Now, I did the whole partitioning thing under windows (computer>manage>etc.) but for some reason whenever I boot the DVD to install it seems like it cannot read my hard drive. I then went directly into setup > target partition and I notice that it is reading my hard drive because my two partitions that windows exists on is there.
Now, what is says when I use cfdisk is that it seems to be reading the DVD and it gives me an error saying that the disk is read-only (which I see why). Is there a step I'm skipping while preparing the hard drive while under windows or is there just something wrong with my computer completely? I tried to read the readme and attempted to use fdisk but it's really confusing for me considering I have never used terminal type code before (except random DOS commands). I can get it installed in virtualbox but I just can't install it on the main computer. If it's worth mentioning, I downloaded the DVD ISO off of the website.
General :: Win7 User Installing Dual Boot Slackware 13?
May 29, 2010I'm a pretty experienced Windows user, and have coded in x86 and win32 API for a while, so I know the system reasonably well. I've used windows since the days of Win95, and prior to that I had an Amiga - so I'm pretty rusty in unix-like operating systems. I have little C coding knowledge beyond reading it, though I can understand what the programmer is doing from reading the source. My only experience with installing linux was on a 486 laptop that failed spectacularly when the CDROM couldn't be detected and used, so I'm necessarily a little wary of doing this, but I've become quite exasperated with Windows lately.
I have decided to make my life interesting (if not easier at first) by dual-booting Linux with Win7. My current machine is a dual-core intel laptop with 2GB of RAM and an ATI X1250 mobile GPU, with a 120GB HDD. I have two partitions currently on this machine - both 60GB-ish. The main C: drive is Win7. I'm aware of the hidden partition that Windows installs. I have an external 1TB USB drive for my applications and data, so space shouldn't be a problem. There is no floppy drive (unsurprisingly) and I can boot from the internal DVD drive.
I have chosen the Slackware 13 distro because it seems to be well respected as a learning tool for unix-like operating systems. My main aim here is not to abandon Windows at first, but to learn a new OS. I'm aware that Slack may not be the most user-friendly distro, but will give me knowledge that I might not gain under other distros. If I'm making a mistake here, then let me know! I have plenty of free time to devote to this little project, and I'm not afraid to learn. I am however afraid to destroy my Win7 fall-back. If all else fails, I need to be able to go back to a working OS to jump on the net to find the answer to what went wrong.
So my question, as per the subject title, is: What do I need to know before I do this? I have no idea what I'm doing with regard disk partitioning beyond Partition Magic - which I don't actually possess anymore. I can use the Windows disk management app. I have no idea how to manage a boot sector. So are there any gotchas that I need to bear in mind? I've already read this thread: [URL]. Which I must admit looks very complicated! I have a fair bit of time before my Slackware 13 DVD-ISO image downloads (20KB/Sec) so have some time to gather information.
General :: Proper Method To Install Slackware / OpenSuSe As Dual Boot?
Jan 5, 2011I just received my Slackware 13.1 & the 'Official Guide to Slackware Linux' book. I know that there is a big learning curve to use Slackware and that is why I purchased it - according to Distrowatch, "...if you learn Slackware, you learn Linux!" But, while I am 'learning Linux', I would still like to have a linux distro installed that would be more of a 'no-brainer'.
So the question is, which distro should I install first, Slackware or say, OpenSuse? I know that if I were going to dual-boot with XP, that XP should be installed first - does order matter for 2 linux distros too? Also, are there any points to remember to do during the installation processes so that I end up with a working, dual-boot computer?
Slackware :: Install Puppy 525 On Slackware 13.37 PC As A Dual-boot Using LILO?
Jul 18, 2011I'm trying to install Puppy 525 on my Slackware 13.37 PC as a dual-boot using LILO. Puppy is living, all on it's own, in sda6, a 6 GiB partition. It got there by using the Puppy Universal Installer and selecting a 'Full' install, not a 'Frugal' install. I cannot find 'LILO' type instructions, only 'GRUB' type instructions.
Has anyone succeeded in doing a hard drive install of Puppy with the LILO boot loader?
Edit: I'll probably regret it, but I used Puppy's GRUB installer.
Slackware :: Dual Boot Of Slackware 13.1 And Windows Server 2008?
Oct 27, 2010I installed Slackware 13.1 and Windows server 2008, I also installed LILO in MBR, I Found I can boot into slackware, but can't boot into Server 2008. then I　use command bootsect/fixmbr. now I can boot into server 2008, but the problem is I can't boot into slackware. I try to install lilo to supper sector. it's not works. I only can boot my slackware by a USB stick.who can help me to solve this problem? I really need these two systems.
View 5 Replies View RelatedSlackware :: Can't Boot Updated Kernel Slackware Current
Jan 5, 2010I updated my kernel in slackware current but can't install lilo, when i was with my old kernel it gave an error about not finding the sda drives (they were named hda before the upgrade).I booted into the slackware 13.0 dvd and modified fstab and lilo.conf replacing hda with sda but lilo still gives an error of not finding sda drives.How can i install lilo so i can boot into my sistem??
View 14 Replies View RelatedSlackware :: Dual Boot With Lilo On Btrfs - Slackware 13.1?
May 29, 2010I just did a fresh install of slack 13.1 on a separate drive to the one I was previously using. I've been having trouble getting lilo to work, so that I can choose between either drive. Lilo is currently installed to /dev/sda, with the old system on /dev/sda1 and the new installation on /dev/sdb1. I keep getting errors like these:
Code: Fatal: Trying to map files from unnamed device 0x0011 (NFS/RAID mirror down ?)
I managed to install lilo from the old system by copying the kernel image from the new system into the /boot/ directory and running lilo. I am now on the new system and trying the same thing in reverse but it isn't working. I have searched around a bit and there's a lot of talk of chroot-ing into the other partition to run lilo. I don't understand why the process isn't working both ways though. I can't run lilo on my new installation even with the two kernel images in the local /boot/ folder. Is this something to do with btrfs or am I missing something to do with lilo? This is my lilo.conf file. I am trying to run lilo using this file from my new installation on /dev/sdb1 and getting the error given above.
[Code]...
Slackware :: Unable To Boot Slackware Off SUSE GrUB?
Nov 1, 2010I've a multiboot machine and I recently installed Slackware64-13.1 on sda33. I added menu entry in SUSE boot loader and configured menu list as per [URL].. it returns GrUB error 15. Here is my menu list entry for Slackware -
Code:
###Don't change this comment - YaST2 identifier: Original name: other###
title Slackware64-13.1
root (hd0,32)
kernel /boot/vmlinuz root=/dev/sda33 ro hdd=scsi
savedefault
[Code]...
Slackware :: Windows 7/Slackware Dual Boot, Different Discs?
Sep 19, 2010My new job requires I use Windows and as such I put a second HDD in my laptop for the purposes of Window/Work The issue is that Windows will not install on this second disc (Windows cannot create partition or install to disc). I got around this by installing Windows to the first disc, then the second then putting Slackware back on the first but then I suffer the "Bootmgr cannot be found, press ctrl + alt + delete to restart".
I am using Lilo and I have never really had an issue dual booting them on the same disc (Admittedly over a year ago) but it is of the utmost important I have them on separate Discs. Has anyone encountered this and/or know a way around?
General :: Slackware 13.1 Won't Boot With Ubuntu Studio - Fatal Server Error: No Screens Found
Jan 1, 2011I have this old box that I used at school that I wanted to re-purpose and use. So i decided to that I wanted to run xp, ubuntu studio and slackware so I can learn about linux and do some other things with xp. I think I got through the installatiosa all fine and dandy, and I installed grub for my boot loader, I can boot into studio and xp, but I cant get into slackware. the grub boot menu is sorta funky too, it shows a generic and recovery mode for studio which is fine, and then another option for xp, some memory test boot option, but then for slackware it shows "Slackware Linux (Slackware 13.1.0) (on /dev/sda4) four times in a row. If I select any of them they all end up with some error; the third SW [slackware] option down the list of the repeated 4 allows me to sign into root, but when I type "startx" i get :
(EE) intel(0): No kernel modesetting driver detected
(EE) Screen(s) found, but none have a usable configuration
Fatal server error: no screens found
but thats with a lot of other text above that. if you need any more details, please dont hesitate to request for them. I'm going to take some time and cool down. I'm trying to get these three OSes running from one HD. I've partitioned the 80 gig drive as follows
Primary 40 G NTSF for XP
Primary 2G Linux Swap
Primary 16G Slackware
Primary 18 U Studio
Primary
Slackware :: Boot In Clean Copy Of Slackware 13?
Oct 9, 2010A friend of mine threw me an OLPC (original model with 1GB of storage) that he was trying to put slackware in. He managed to install a minimal installation, but now it asks for the e2fstools (the stuff to run fsck on ext(2/3/4) partitions) which he didn't install (he formatted the "disk" as a single jfs partition). Is there any reason why it would want to have those tools given that there are no ext(2/3/4) type filesystems in that machine? And is there any specific init script (or udev rule) that can be edited to make it not try and check ext(2/3/4) partitions?
View 4 Replies View RelatedSlackware :: Slackware + Other Distros Networks Boot With PXE?
Oct 3, 2010I successfully managed to install slackware on a laptop with a broken optical drive, no floppy drive and no option to boot from USB stick, with the invaluable help of AlienBOB's guide: some of the packages could not be installed during the installation. The fatal errors seems to occur randomly and the packages that I later had to install by hand were the following:-git-java (can't recall exactly what it was about)-linux-howtos-kdebase-workspace
View 4 Replies View RelatedSlackware :: Using GRUB2 And Want To Boot Slackware In Different Resolution
Sep 10, 2010I have, for awhile, had Ubuntu 10.04 as my main OS. I decided to go back to SW13.1, and added it in as dual-boot, with grub2 as my bootloader.
grub sees/boots SW fine.
But SW boots in 640x480, and is fugly, to say the least.
How do I change this? Grub currently runs at 1024x768. And in lilo, it's easy as pie to change the kernel boot resolution.
How do I do this in grub2? (Notice I said grub2, because it's MUCH different than grub, as far as config files and the like)
Slackware :: Take Current Windows7 (x64) Setup And Make It Into A Dual-boot Setup With Slackware 13.0?
Jan 24, 2010I'm trying to take my current windows7 (x64) setup and make it into a dual-boot setup with slackware 13.0 (x32) and am hitting a brickwall. I guess I would like to know if I can salvage the situation without formating my windows drive. I fully intend to, but I had hoped to not do it this month. I'd like to get dual boot going so I can master it and acquire all the files/drivers I'll want and then format and do it 100% right next time.
Currently I have windows setup on a 3x 500gb Raid0 onboard array which itself has been flawless. After I shrunk my current partition size to give me about 25gb of free space I proceeded to setup Linux, and I was unable to perform the cfdisk portion for partitioning the array for Linux.
I tried using cfdisk:
/dev/hdx (a1-a3,b1-b3)
/dev/sdx (a1-a3,b1-b3)
I even attempted to locate with: cat proc/partition and tried using cfdisk on every device it located. It always said it was either an unknown partition table and should I start at zero, or bad partition. I was of course too concerned over my windows setup (which has almost 1tb of stuff I have not backed up) to go any further into the unknown.
PS: I have used Slackware before, back at 8.1, 10, and even a very brief interlude at 12.0, this is my first attempt on this computer however with 13.0, it is currently running fine on my laptop and my PS3 (Laptop is even dual booting 7/Slack13. Albeit without raid)
Phenom 9850
M2N-SLI Deluxe (Nvidia AM2)
4x1gb of 1066 kingston hyperX
3x500gb WD Caviar Black Sata2 3.0
Slackware :: Dual Boot Slackware With CentOS Using CentOS GRUB
Apr 11, 2011For various reasons, I have to learn my way around CentOS. I have an old computer (P3) with Slackware on it. I threw in a second HDD that I had lying around and installed CentOS to it. I was figuring that I'd just decline installing GRUB or point GRUB to Slackware as the second OS and end up with dual boot.
The CentOS install, though, blew right past that part with offering me any options. It put a small boot partition on the CentOS drive and now the box boots straight into CentOS.
I've spent the better part of the day trying to get GRUB to boot the Slackware drive and had no luck, though I've learned a lot about GRUB error messages.
By the way, CentOS uses GRUB v 0.97.
Question: someone could point me to a reference.
Here's the output of fdisk -l on that computer (/dev/sda is a 4GB SCSI disk that was originally the boot disk for Windows 2000 server on that computer):
Code:
Here's the currentGRUB file. I added the section about Slackware. I've also tried pointing it at:
Code:
I've also tried:
Code:
Code:
Slackware's LILO:
It's been six months or more since I used this computer. It's my experiment-er "play" computer and I had taken the HDD out to test a computer for one of the members of my LUG, so I can't remember exactly how I configured the LILO install, but, if I did what I usually do, I installed it to the MBR of /dev/hda. I have considered just blowing away LILO, but I'd be happier if I could just use GRUB to call LILO.
Slackware :: Can't Boot Into The OS
Feb 11, 2011I was recompiling my kernel to fix another problem I had. I was following alienBob's tutorial if it means any thing. Any way when I booted it up I got a kernel panic. The error is Kernel Panic - not syncing: VFS: unable to mount root fs on unknown-block(8,2) I think its something to do with lilo or I flubbed something up. I am just mentioning this for advice. My real problem is that I cant boot into the OS to fix it. I tried using the cd but all that tried to do was reinstall it.
View 8 Replies View RelatedSlackware :: Use A USB Drive To Boot - Getting "boot Error"
Oct 3, 2010I wanted to use a USB drive to boot slackware because I do not have a blank CD or DVD. So I went to [URL] first, but I couldn't get dd and syslinux to install on windows 7. So then I brought out my trusty puppy linux USB stick, and copied the file onto puppy. Then I typed in dd if=/(desktop directory)/usbboot.img of=dev/sdd1 bs=512 but when I booted my computer up with the usb stick I get the message "boot error"
View 3 Replies View RelatedSlackware :: Can't Boot Into 13.37 On Dell XPS 15
May 28, 2011When I installed Slackware 13.37 for the first time, there was no problem. Everything worked very well - as expected from this great distro.
But, the LILO won't detect Windows installation correctly. So I tried to edit it using liliconfig, where I wrongly entered the entry for Linux. So without further messing around with the system, I went for reinstalling the whole system.
Now when I chose 'Linux' in LILO menu, Some initial startup scripts ran correctly - like detecting and mounting the root and non-root file systems.
But then the suddenly screen went black. It happened so fast, then and again, that I couldn't take a look at what's wrong.
Slackware :: Does Anybody Here Dual-boot On A Mac?
May 26, 2011I plan to get a new Macbook Pro some time this summer, and I was hoping I would be able to dual-boot Slackware and Mac OS X as easily as I do on my current Sony laptop. Is there anyone here who has already succeeded in dual-booting Mac OS X and Slackware, preferably on a laptop?
View 12 Replies View RelatedSlackware :: How To Boot Faster
May 23, 2011Is there a way to make the 'loading linux...' Bios Data check faster or disabled? It is taking 3 times longer then the actual boot.
View 2 Replies View Related