I connect my MP3-player to USB-port, /dev/sdb appears, but no /dev/sdb1, so I can't mount it (no automount in the system). Filesystem of the player seems to be FAT32. "dosfstools" and "mtools" are installed. Why is there no sdb1?
View 5 Replies
I would like to mount my mp3 player (sdb) without waking up the sleeping SATA disk sda. Attaching mp3 player does not wake sda up, but mounting it does. My system is mostly Slackware 11, so I'm still on kernel 2.4.
View 5 Replies View RelatedHow do I configure my Debian installation to mount external USB drives to mount points based on the volume names of the drives? For instance, if I have a thumb drive with the volume name of "SWORDFISH," how do I have Linux mount it at /media/SWORDFISH? I'm aware that this can be setup in FSTAB, but that requires that I know the UUID of the device beforehand and that I take the time to set each external device up in FSTAB first. That does nothing for me when I have a thumb drive that has never been plugged into my computer before.
This seems to be setup by default in Ubuntu/Kubuntu, but is not working for me with a fresh installation of Debian Squeeze and KDE4. I've spent the past 2 hours Googling for a solution and have turned up nothing. UPDATE: My results are inconsistent. Sometimes Debian mounts devices to mount points based on the volume names, and other times it gives them generic mount points (e.g. /media/usb1).
I am trying to setup fstab to automatically mount my NTFS partitions. I have used various Mount managers to create the entries in fstab. The fstab seems fine, but when mounting at boot or even via Nautilus I get the error message that I do not have permission to mount the disk.
1) Can this permission be set in the fstab file? If so what is the syntax of the fstab entry?
2) If not, is there a tool i.e. GUI to set the mount permissions?
I'm not really sure this is the right category for this post...
I've been thinking and reading but I really don't find a solution, and this is why I decided to post here. I'm not a newbie using Linux but I know absolutely nothing about nfs and related stuff. If explanations are not clear/precise I'm sorry and absolutely open to explain myself better (I'm really desperate, at this point).
I'm running a Debian in a VirtualBox inside a RHEL5. To supply space to the virtual machine I'm trying to mount a disk (? maybe not?) that I created in the RHEL.
In RHEL: I created a directory /some/path/dir and I granted access to it from the VM (edit /etc/exports file and restart the nfs service)
In Debian: I created a directory to be used as mounting point (mkdir /other/nice/path/dir) and I tried to mount (mount -t nfs -v redhat:/some/path/dir /other/nice/path/dir). What happens next is the following:
mount.nfs: timeout set for Thu ...
mount.nfs: text-based options ...
mount.nfs: mount(2): Input/output error
mount.nfs: mount system call failed
Now, this Input/output error is too vague to trace where the problem is, but I really have no idea about how to go more in depth (are there logs somewhere? What should I look for? ... ...).
I have two internal hard drives.I just installed Debian Lenny in the smaller 80GB. But when I try to access the other hard drive it shows:
"Invalid mount option when attempting to mount the volume"
info:
-The 80GB is on dual boot with Windows 7 and Debian Lenny.
-The 500GB secondary hard drive is NTFS filesystem.
im trying to get a network setup i followed the instruction via gentoo wiki samba what i have done
[Code]...
then i did chmod 777 to the shared folders on both machines went into nautilus it sees the folder but it will not mount the folder showing the error msg:"unable to mount location failed to mount windows share" ive been searching unbuntu forums opensuseforums and google for an answer to this issue but as of right now anything that i have tried to do has failed and nothing seems to be working.
My cdrom was working just fine until I updated. Now I get mount: special device /dev/scd0 does not exist
View 4 Replies View RelatedI'm having some trouble in trying to make a clean solution and tougher time searching to not get the basic mounting pages/posts. So I thought I'd throw this out hereFor Oracle, we have an app server that runs /sharedapps and is an NFS mount for all other app/db nodes. What I'm working on now is that on this app server that hosts/exports /sharedapps file system has a sub folder with a CIFS mount (/sharedapps/data/appmount). e thing is that the remote nodes with the NFS mount to /sharedapps don't see the remote data in /sharedapps/data/appmount, only the main app server that has the CIFS connection. Realistically it makes sense why, but I'm trying to research if there is a way to have it do so. This is where I'm struggling. We are working on this in a dev instance right now but soon to be in production. In production, there are many DB nodes that could process a request which is why it would be best to have the NFS connection follow the remote CIFS connection
View 8 Replies View RelatedI plugged in USB(single fat32 partiton of 2GB) and got message window Cannot mount volume. Invalid mount option when attempting to mount the volume.
[Code]...
Also did check in gparted , dosfsck and fsck.vfat but no errors reported.
I have a COWON S9 (an MP3 player that normally mounts like any memory stick) and I noticed that when I connect it, it won't auto mount and does not seem to be recognized by Lucid after yesterday's kernel updates.
This player has always auto-mounted without any problems until yesterday's (2011 Jan 27) kernel updates. I rebooted and made sure I'm on the latest kernel.
Anyone else experiencing things not auto mounting? I can't get it to manually mount either. It doesn't seem to be recognized at all now.
I have Mandriva 08 and I can't get a MP3 player or a Flash Drive to mount. If I manually mount the Flash drive the "Computer File" won't create a file so I can access it. I get no desktop icons and I have checked the box in "config-whatever", The Flash Drive will appear in HardDrake but the MP3 player will not. The MP3 player will appear in the "Computer File" but will not manually mount.
View 2 Replies View RelatedWhen logged in as my normal userid to OpenSuse 11.2, I cannot get Banshee to recognize my Creative Zen MP3 player. The player does appear as a device on the desktop and I can access files on the player through that icon, but cannot get Banshee to recognize it so it can be managed in Banshee.If however, I log on as root, Banshee recognizes the device without a problem.
The log file in ~/.config/banshee-1 shows the following:
libusb couldn't open USB device /dev/bus/usb/001/004: Permission denied.
libusb requires write access to USB device nodes.
[code]....
It has 2 GB of built-in flash memory and slot for MicroSD. I have OpenSuSE 11.3 with GNOME and Windows XP SP3 installed on my Samsung NC10 netbook. In Windows, when I connect player via USB, it recognize player as disk and I can drag files to listen music. I used to that when I insert USB storage device or mp3 player in my netbook running OpenSuSE,automatically mounts device to /media/xxx. But when I connect player to computer, nothing happens. There are no new entries in /dev/ after insertion.
View 4 Replies View RelatedIt seems I cannot mount and unmount a USB Drive, it gives me the following error:
Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/DAVE-1
I have changed FSTAB, and now it looks like this:
proc/procprocdefaults00
sysfs/syssysfsnoauto00
usbfs /proc/bus/usb usbfs auto,user 00
devpts/dev/ptsdevptsmode=0620,gid=500
code....
I run a headless Ubuntu 8.04 server, which acts as a web, email and file server. I am sticking with 8.04 as it is a LTS release and will upgrade to the next LTS when it is released.
I have two external USB drives, that I need to mount at boot. I have been using /etc/fstab up until now, with the following entries:
Code:
However, as I gather from doing searches is quite common, occasionally I get an error during boot (causing the system to drop to a recovery shell) because the USB drives take time to wake up and the system hasn't found them by the time it reads /etc/fstab.
From doing searches, it seems there is nothing you can do to fstab to fix this, so you need to mount them using an rc.local script instead, using:
Code:
The problem is, as I have two USB drives, their /dev/sdxx location changes between boots. I thus want to use UUID codes as I do in fstab, however I haven't found anything about this.
Does anyone know how I can use the mount command and UUID to mount a drive in rc.local and what options I have to use the mount the drive with the same options that I am using in my fstab entry? Obvisouly, I can't refer back to fstab using the mount command, because then I will still get the boot error issue if they are listed in fstab. And there is no space internally for the USB drives as there is already two internal drives.
I installed Ubuntu Server 9.10 in a virtual machine, and I'm trying to install the VMware Tools but I can't mount the installer CD: $ sudo mount /dev/scd0 /media/cdrom mount: unknown filesystem type 'iso9660'
View 1 Replies View RelatedI have a Dell Inspiron 1720 running Ubuntu v10.04 with a wireless card.My desktop is a Dell Optiflex running WinXP.The desktop is connected via ethernet cable to a Linksys wireless router. Certain folders on the desktop are set for sharing. Up until early last week I was able to access the desktop folders from the laptop with no issues.Suddenly I am now getting this error "Unable to mount location Failed to mount Windows share" whenever I try to access the desktop folders from the laptop.I suspect an upgrade is the culprit, but not sure.
View 3 Replies View Relatedactually some my windows ntfs partiitions are unable to mount at start up. the error msg is -'some of your partitions are unable to mount press 's' to skip or 'm' to manually mount.
View 14 Replies View Relatedwhat now trying to mount partition get this error this is the partition ubuntu 9.10 is installed on and upon reboot error no device with a long string. mount: can't find /dev/sda6/mnt in /etc/fstab or /etc/mtab
so now that I believe I've successfully mounted the partition how do I direct the bootloader to this partition /dev/sda6 on /media/11076e45-e27d-470b-bb6d-6894f7809a0c type ext4 (rw,nosuid,nodev,uhelper=devkit)
I am struggling with getting an sshfs mount mounted on system boot. I have a script that mounts the sshfs for "userA". When userA runs the script all is well - user A can access the remote filesystem, root user can't see it as expected. The basic command is: sshfs userA@remote host:/home/userA /home/userA/mountdir -p 21212 -o password_stdin < passwordfile. I can prepend the sshfs command in the script with su - userA -c and when I run this script logged in as root all is well, userA has access and all is well. If I then put this script in /etc/init.d and reference it properly in the rc. directories the mount doesn't happen. If I prepend the sshfs command with sudo, same thing. Logged in as root I can run the script and UserA has access. Run the script in /etc/init.d during startup and the mount doesn't happen. Echoing text to a log file shows that the script is being executed but no mount happens.
View 4 Replies View RelatedI've tried to get an opensuse box I have to share a directory via NFS. I've failed each time, but I thought that the third time, I'd enlist some help from the forums, if I could. how do I know that the nfs server and not the client is the problem? Short answer is: I don't! That's why nfs (and many netwrk problems) are laborious, you're troubleshooting needs to take place at both source and desitination. Next question, what do I have set up so far? Well, I did download the nfs server kernel stuff (two months back) and /etc/init.d/nfsserver start seems to get set up OK. No errors and the daemons nfsd, idmapd, mountd area all running. So, I *think* that part is OK. I have the share set up properly in /etc/exportfs and have "exportfs -r" it.
OK, now onto the trickier stuff: the client and iptables. On the client pinging to the nfserver box is perfect, and I have rpcbind running. the reported error is "mount.nfs: mount system call failed" though from experience nfs errors don't mean a whole lot.However, I will go off and check now and see if I need a mountd running on client-side too.Then there's iptables .... ouch, that could be a long and painful trek. I don't see any specific ports being blocked, and it's the iptables that the default v11.2 opensuse came with. I did turn them off and the problem was the same, so whether wishfl thinking or not, I'm hoping it's not an iptables issue.
I saw a post where you were faceing "Type s for swith or M or mannual restore"
I got the same message. I tried S but nthing happend then I tried M. it took me to root@ubuntu:/#
How i restore it manunally or if not possible I need to back up the data to pend drive
but i cant find the pendrive in the home section.
I created a encrypted volume on top of software raid1. These are my steps:
1. Create logical partition on sda
2. Create logical partition on sdb (same size)
3. Change type to partition to 'fd' for both partitions
4. Check that the both partitions are same size and type
fdisk -l /dev/sda && fdisk -l /dev/sdb
5. partprobe
6. Make sure there are no remains from previous RAID installations on /dev/sdb by running:
mdadm --zero-superblock /dev/sda6
mdadm --zero-superblock /dev/sdb6
7. mdadm --create /dev/md4 --level=1 --raid-disks=2 /dev/sda6 /dev/sdb6
8. watch cat /proc/mdstat
9. update mdadm.conf
mdadm --examine --scan | grep mdx >> /etc/mdadm.conf
10. Load twofish module
[root@localhost ~]# modprobe twofish
11. # cryptsetup -y -c twofish-cbc-essiv:sha256 create ftdata /dev/md4
Enter passphrase:
Verify passphrase:
12. mkfs.ext3 -b 4096 -R stride=8 /dev/mapper/ftdata
13. mkdir /ftdata
14. Mount the encrypted volume: mount -O noatime /dev/mapper/ftdata /ftdata
It mounts successfully this first time. When I cd /ftdata, I can see the lost+found dir
Now, I unmount the volume
cd ~
Code:
umount /ftdata
cryptsetup remove ftdata
And now, if I try to setup my encrypted volume like this:
Code:
[root@localhost ~]# cryptsetup create ftdata /dev/md4
Enter passphrase:
mount -O noatime /dev/mapper/ftdata /ftdata
I get this error:
mount: you must specify the filesystem type
[Code].....
i'm trying to connect to the three other machines in my house but am having quite a hard time doing so. i've never had a problem in the past with ubuntu, but, with 9.1 and windows 7, things have gotten a bit harder. i'm running 9.1 and my roommates are running windows 7. i've installed, set up and configured samba and i can see the computers on my network, but any time i try to access either of the drives, it says unable to mount location: failed to mount windows share.
View 4 Replies View RelatedNot able to mount windows drive & foder, in linux. i have got following error.
mount error 92 = Protocol not available
I created a encrypted volume on top of software raid1. These are my steps:
1. Create logical partition on sda
2. Create logical partition on sdb (same size)
3. Change type to partition to 'fd' for both partitions
4. Check that the both partitions are same size and type fdisk -l /dev/sda && fdisk -l /dev/sdb
5. partprobe
6. Make sure there are no remains from previous RAID installations on /dev/sdb by running: mdadm --zero-superblock /dev/sda6 mdadm --zero-superblock /dev/sdb6
7. mdadm --create /dev/md4 --level=1 --raid-disks=2 /dev/sda6 /dev/sdb6
8. watch cat /proc/mdstat
9. update mdadm.conf mdadm --examine --scan | grep mdx >> /etc/mdadm.conf
10. Load twofish module [root@localhost ~]# modprobe twofish
11. # cryptsetup -y -c twofish-cbc-essiv:sha256 create ftdata /dev/md4 Enter passphrase: Verify passphrase:
12. mkfs.ext3 -b 4096 -R stride=8 /dev/mapper/ftdata
13. mkdir /ftdata
14. Mount the encrypted volume:
mount -O noatime /dev/mapper/ftdata /ftdata
It mounts successfully this first time. When I cd /ftdata, I can see the lost+found dir
[Code]....
So why is it that I can't mount my encrypted volume after the first time? I am giving the correct password when it asks to.
i have installed nfs server on my redhat machine.when i want to mount shared data from client(suse)machine the following error occur."mount.nfs: mount to NFS server '10.3.31.146:/home/usbtest' failed: System Error: No route to host"
View 1 Replies View RelatedI just installed Linux Mint Debian Edition on my friend's laptop. The biggest problem is getting his iPhone 4 to mount. On libimobiledevice.org it shows a cool video of a guy managing his iPhone with Linux thanks to libimobiledevice. libimobiledevice.org also says libimobiledevice supports the iPhone 4. But when he plugs it in, he gets an error that says:
Quote: Unable to mount location: Unhandled Lockdown error (-5) It's a serious issue and needs to be resolved ASAP. ***EDIT*** If this is a hardware topic, any mods can feel free to move it.
usb devices, such as external hdd, memory stick and mp3 player, when I connect them to USB, they show up in Nautilus, but when I click on them, Nautilus is unable to mount them and returns the following error: Unable to mount location Error mounting: mount exited with exit code 1: helper failed with:mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error in some cases useful info is found in syslog - try dmesg | tail or so
View 3 Replies View Related
