Have an older EMachine that I'd like to load up with Linux. The EMachine already has Windows 2K loaded. Have Fedora Core 2 and Red Hat 5 and for my test would take either. Have tried to boot up this emachine with the (either) dvd in the drive and made sure dvd is first in boot up sequence yet all that happens is Windows loads.
View 7 RepliesA friend loaded linux onto my eMachine netbook. Unfortunately the touch pad and WiFi refuse to work. He loaded it into a 40gb partition leaving 120gb unusable so it would probably make sense to start all over again. I only need basic txt software, pics and internet to work so I am not looking for state of the art. Just something that will work, is not too difficult to set up and preferably can be loaded from a pen drive (memory stick). Any suggestions? The "distro" as I understand it is Kubuntu. Not sure what version but I will have a look later.
View 7 Replies View RelatedI am trying to install Ubuntu 10.4 on an old Emachine. I use a flash drive to install on an old laptop and it worked fine. The Emachine will not recognize the flash drive untill after windows loads and I have burnt the same file to a CD and it will not load. I burned that iso file to cd and the lowest speed.
View 5 Replies View RelatedI have been trying for days to install Ubuntu 10.04 on my computer. When I try to Install it all i get is a faint black box that is 3/4 of the screen..nothing else. My processor is a AMD Athlon LE-1620
View 3 Replies View RelatedI have a USB drive on which I want to install Arch Linux (using the installer, not unetbootin or something similar, as I want the drive to be persistent.) The computer from which I want to boot this USB supports booting from a USB floppy, not a normal drive. Is there any way for me to make a USB floppy on another drive and use that to boot the normal USB drive?
View 2 Replies View RelatedI am very new to Linux and Fedora. I installed newest Fedora to a friend's Acer emachine E725 but the wireless does not work. Originally it had a Moblin linux installed on it but my friend does not speak English so I had to install for her a Hungarian version linux. Fedora seems to be quite user friendly but this wireless problem makes me worry. The wireless was working perfectly on Moblin, the wireless manager showed all available wifi connections and I could chose the desired one and the laptop connected to it. Unfortunately on Fedora and other Linux distributions this does not work. This laptop has a hardware button to switch the wireless On and Off but under Fedora it does not function.
[Code]...
I have a Toshiba laptop with BIOS that will not recognize USB as a boot medium (I have purchased two USB 'thumb' drives with Distro's that do boot but the BIOS see them as HDD devices!)I did manage to install and boot a distro from the USB HD but ended up with the USB drive having to be connected' to select any of the OS partions, to boot anything.I do realize that somehow, when installing the new distro on the USB drive, I changed the GRUB configuration to be on the USB drive which obviously I did not want, so can
View 5 Replies View RelatedI'm trying out puppy linux, as I have an old system, and the new Ubuntus do not work on it.
Anyway,I cannot boot from my hard drive but only from the floppy.I'm just not too keen on always booting from the floppy.
Here is the Menu.ls file:
Old Boot drive in new PC (XPPRO + Ubutnu) Run the XP repair BUT still have Error 21, used XP repair console to repair MBR still have problems.
View 1 Replies View RelatedI have an Emachine that my uncle gave me and I thought that Ubuntu would find a nice home in the cozy case and well.....
I have a Emachine el1200-05w AMD Athlon 64 2650e / 1.6 GHz NVIDIA GeForce 6150 SE 2.0 GB mem. and 160GB HDD
I had to fight to get it to install kept freezing and stopping. I finally got it installed. It runs fine and is fast. I like it alot and then after about 5 to 10 min. The screen locks up or will distort in multicolor stripes across the screen. I cant figure out whats going on!
I did just notice that the specs say it's a 64bit possessor and I'm running the 32bit ubuntu will that make a difference?
we have an oracle application server on red hat 4.6 upon booting it comes up with error: attempting boot from hard drive (c GRUB)
View 2 Replies View RelatedI have been playing around with a Ubunto 10.04 live cd (32bit) on my mac. I want to be able to boot this OS (or similar) on my Mac, and on any other computer (PC or Mac). I also want it to remember changes and files. From looking around this is possible from a USB (with a Casper RW loop file I think). I have used the Live CD to create a bootable flash drive, which works on PC's but not my mac. Using these instructions: [URL] I was able to get my Mac to see the Linux at boot but once I clicked the Tux icon it would hang/ freeze. I let it sit for 10+ min and nothing happened. I started over (with a fresh formatting) and got the same results. I have reformatted the flash drive and am ready to try over. I think that I am goofing up in terminal steps as I am not use to doing that. After the last step in the terminal I get an error, something like invalid number or similar, it is not the one mentioned in the instructions.
I know that this for advanced users, I am not yet but working that way. I an a (retired) power windows user, moderate Mac user and a new Linux user. I want to learn which is why I am asking. I am not in a spot to install Linux directly on my Mac, so I I am seeking help to do it on a flash drive. I want the ability to run off any computer and I see this as I way to get there.
Background: Before this I was using Ubuntu, but I decided to use slackware from now on. So I installed it using a DVD and using the setup program also formatted a USB drive since it asked if I wanted to. After this I could boot into slackware fine (including getting into KDE with startx) and I can shutdown using halt -r now. When I boot with the USB drive in it says "Welcome to the Slackware Linux custom USB boot stick!".
Problem: If I turn on the computer without the USB drive it goes into "grub recovery". I don't know what I should do if I want to boot the computer without the USB drive. I also don't know why GRUB is coming up because I thought it had installed LILO.
I downloaded damn small linux to a CD; consisted of an index file and a .iso file. I'm trying to boot my Windows XP PC from the CD RW drive; have changed the bios settings to put USB CD in first position at boot config screen. Also tried another option that seemed to refer to CD RW drive, and put that in first position. my PC keeps starting up Win XP - I do hear the CD RW drive cranking away at startup, but that's it.
View 3 Replies View RelatedI have a 2GB usb flash drive and I wanted to boot a linux distro from it. My dilemma is that I'm having a hard time balancing size with quality.I've been going the virtual route so far in my linux studies but the variety with hardware is so limited. If I had a bigger flash drive it wouldn't be a concern but I need to make do with what I have.So what's a good learning distro that has good features but can be installed onto a 2GB flash drive? I'm sure there is more than one but I'd like to get some different input from more seasoned users.
View 7 Replies View RelatedI would like to understand the following:
I have a Debian installation CD that I can boot from. Now I copied that to an USB-stick using dd
dd if=/dev/sr0 of=/dev/sdc bs=1M
The CD-image should contain a boot-sector and everything else that is needed for booting, yet the USB stick does not boot.
What am I missing - why does the stick not boot?
PS: I am not interested in tips on how to create a bootable stick, I only want to understand why the above method does not work.
Slackware's lilo runs from sdb1. I installed ubuntu studio on sda3.
I can't boot it from lilo.
Code:
boot = /dev/sda
image = /boot/vmlinuz
root = /dev/sdb1
abel = Slack64-cu-sdb1
read-only
[Code]....
I need to mount a USB drive at boot up. I tried this entry in fstab:
Code:
LABEL=/Root-FS /Root-FS auto defaults,auto,user 1 0
But that did not do it. If I do a 'mount -a', that works.
This is for an embedded Debian system.
Something caused my Fedora 11 system to reboot this evening, only it keeps trying to boot from a CD/DVD. I get to a prompt that says "Boot from CD/DVD" and then it appears just to wait. I can insert my Fedora 11 installation disk and boot from it in rescue mode, and then I can see my entire file system, so I don't think the hard drive has failed. The system just doesn't seem to want to boot from the HD any more. I can get to a command line using the Fedora rescue mode, but I don't know what to do once I'm there.
one additional note. Around a month and a half ago I deleted some files by mistake and wanted to try to recover them. I tried a bunch of approaches that I came across (none worked), and I do remember that one of them had instructions to unmount a portion of the filesystem to protect it from being overwritten before I could recover the files.
Unfortunately, at this point I have no real memory of exactly what I did, but the system has been working fine since then. I would have thought that I had rebooted since then, but it's possible that this is the first time I've rebooted. Could I have unmounted some part of the file system such that it would still by unmounted even when rebooting? How can I check this from the command line I get in rescue mode? (My file system gets mounted under /mnt/sysimage/)
I've installed RHEL 5.3 on a Dell Desktop. I don't want to install GRUB to the MBR. Is there a way to boot up RHEL from a floppy?I've installed GRUB on to a floppy but not having much luck starting up RHEL. In the past Slackware has allowed me to startup the kernel from a floppy using LILO. I was hoping that there is way for RHEL too.
View 6 Replies View RelatedI bought a USB Harddrive (Seagate 320 GB) and I want to install a Ubantu 10.04 LTS on it. Although my HP/Compaq Mobile Workstation has a selection to boot to a USB Harddrive, I could not get it to boot to the USB HD. So I found this page:
[URL]
And tried to create a CD as found in "Booting the kernel from a bootable CD". I thought I got the process to work, and it appears to have found the drive, but after a whole bunch of scrolling text and a long series of "stdin: error 0" I get:
BusyBox v1.13.3(Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash)
Enter 'help" for a list of commands
(initramfs)Unable to find a medium containing a live file system
I have problem with my laptop Samsung VM7000. The BIOS has a password on which I don't know. It has no HDD and the CD-ROM is damaged. I have a FDD floppy drive and two USB slots, they work (tested). To remove password I tried this http://dogber1.blogspot.com/2009/05/...ered-bios.html but it didn't work.Then I've found a Linux based password cracker http://www.pccmos.com/ but, since my cd drive is dead, I can't launch it. I can write it on a flashdrive, but my laptop is not booting from flash, so I have to make a floppy-boot-disc to boot flash via floppy, but how?
View 2 Replies View RelatedI have installed Kubuntu 9.04 to a USB external Iomega eGo Desktop hard drive (it's 1 terabyte). I've tried installing with my other hard drives attached (sdd) and with them disconnected (sda). The installs went smoothly in both cases but I cannot boot from the USB drive. My BIOS supports booting from various devices including USB. Can this be made to boot? How?
View 3 Replies View Relatedhow do i install mandriva 2010 with the help of pen/flash drive? i hav the ISO image but my DVD drive is not working so burning it to a disk is not a sol for me i m using win 7 so the other method shown is not working
View 6 Replies View RelatedI have been given a new system, but want to try moving my old server's system / boot drive directly to it, rather than re-install.
All of the hardware is different, what am I letting myself in for? What should I prepare for?
Existing system OS is Ubuntu 10.04 Server, non-specific install from live CD.
I've done this before on Win XP and it was a nightmare, but I suppose that's not really designed for that sort of thing. I'm hoping that linux will be easier.
There are many threads around about having both OS's but most seem to only refer to using one HDD. I might be wrong. I am currently building a new PC and I want to put Ubuntu on one drive and have Windows 7 on the other, and be given to option on which one to boot from (if possible). Can I follow the general directions around the internet that state it is usually better to install windows first, then do ubuntu, or would it not even matter.
View 12 Replies View Relatedi want to know what are all possible ways of mounting network drive during boot up.
I want to mount a remote drive which contains some config file of several process,the drive should be mounted at boot up so that all the configuration files are available during boot up.
i was trying to install Linux on a old usb hard drive i have and i installed it onto the drive (from a .iso cd, i clicked install onto hard drive from the desktop) then rebooted. i tried to boot Linux from it but it did not work then i tried booting of the my main hard drive that has windows 7 on it and i get "failure to boot hard drive" (or something close to that). i reloaded fedora from the CD and looked and my main hard drive still has all of the files from windows and also the usb hard drive has files that look like they are from the Linux install.
View 1 Replies View RelatedI tried to use Grub to boot the Fedora 14 Live CD from its ISO image (SHA256 verified) on the hard drive. I put Fedora-14-x86_64-Live-Desktop.iso in the root directory of the FAT32 partition D: (sda5) then extracted isolinux from this ISO, and put it on D: I followed the isolinux.cfg file, and wrote a menu.lst as follows:
title Fedora 14 Live CD
root (hd0,4)
kernel (hd0,4)/isolinux/vmlinuz0 root=live:CDLABEL=Fedora-14-x86_64-Live-Desktop rootfstype=auto ro liveimg quiet rhgb
initrd (hd0,4)/isolinux/initrd0.img
However Grub told me: No root device found. Boot has failed. Sleeping forever. Here's the contents of isolinux.cfg:
[Code]...
I have the following "setup:"
iMac (no internal drive/dead) --------- (Firewire) ------- [[MAC OS X]]
|
|
|[code]...
I routinely use the firewire drive to boot MAC OS X.However, I would like to boot from the linux partition of the USB drive. This linux partition had linux installed on it from a live cd, and during that process, I told the installer to install GRUB on the usb drive (which happened to be /dev/sdd).My question is, how do I get this disk to show up during the iMac option-boot? Currently, only the firewire MAC OS X option shows up. I have read about rEFIT, but that appears to install it to the Mac OS X disk (would that still work?)...Also mentioned was installing rEFIT to the internal EFI system partition, but I don't know if that is wise.