General :: Too Broad To Describe In A Subject Line

Jul 21, 2010

I dug up an old P2 machine and loaded it with 320MB of RAM and a cheap BIOS-less RAID card using a VT6421 chipset. I attached a 1TB SATA HDD to it and booted it up with the latest gentoo minimal install disk. I have installed gentoo before. The first problem I had is that the system would hang at Scanning for sata_via.... I resolved this by booting with "nosata." This brings me to my first question: Will I be able to use my drive once the OS is installed? It seems like the answer would be yes, but I wanted to make sure.

After booting with the 'nosata' option the system would hang at scanning for pata_qdi.... I resolved this by booting with 'noload=pata_qdi.' Now the system is hanging at: attempting to mount media:- /dev/hdc I have been searching but have not found anything definate on this one. One post ( i am sorry but i forget where; i was working on this for hours) suggested that the problem is caused by the age and speed of the drive. I really don't know much about these things. Can anyone confirm this? Is there a way to make it work, or do I have to replace the drive? If I replaced the drive won't the new one just slow down to accomodate the old motherboard?

View 1 Replies


ADVERTISEMENT

General :: Command Line To Check For A Specific Email - By Subject - On An SSL Secured IMAP Server?

Feb 1, 2011

Anyone know a simple command line to check for a specific email - by subject - on an SSL secured IMAP server?

View 2 Replies View Related

Ubuntu Servers :: Email Filtering By Subject Line?

Jun 8, 2010

how to set up a simple rule on the server side so emails with a certain subject just go into that user's .Trash. Right now my users will get roughly 25,000 of the same email from our corporate offices and it is destroying their email clients. I believe the mail setup is postfix and courier with virtual users. I tried googling this up but I couldn't find much current or ubuntu-specific information.

View 3 Replies View Related

Server :: Users Received A Spam E-mail Without Subject Line

Sep 19, 2010

I need help with header_check filter on postfix. In the last week mail users received a spam e-mail without subject line and I don't know what is the way to reject this. This is the example of message header:

From: "example@example.com"
Date: September 16, 2010 9:07:43 AM GMT-04:00
To: <example@example.com>

I want to reject e-mails that don't have Subject line

View 2 Replies View Related

Server :: Insert Counter Number In Subject Line Before Sending Email Message?

Feb 2, 2010

Did anyone heard about or can suggest mabe a postfix serverside solution in order to insert a counter number into the subject line before the message is sent?
I mean something similar with helpdesk tickets, because I would like to create the possibility for the senders, to make further refference about a speciffic message using it's counter number provided by postfix server.

View 5 Replies View Related

General :: Describe Daily Tasks Of AIX Administrator?

Jun 15, 2011

I am new to the AIX .Can any one describe me the daily tasks of a aix admin

View 3 Replies View Related

General :: Mail Subject Getting Truncated

Sep 23, 2010

Here is a script that I use to send mails

Code:
#!/bin/bash
SUBJECT="This server has problem"
TO="308718@CDCTGIMCLSB.localdomain"
cat mail | mail -s ${SUBJECT} ${TO}

I am receiving the mail in mail box of system, but subject line getting truncated to just This instead of This server has problem. Here is mail

[Code]...

View 4 Replies View Related

General :: Scan Each Incoming Mail With Conditions On Sender Name And Subject

Jan 8, 2010

Request your help in writing a shell script for the following requirement:

1) scan each incoming mail with conditions on sender name and subject
2) scan the mail body for set of characters and email them.

general usage is as follows: I get a mail as follows from: [URL]... subject : Urgent, reply body : name : xyz contact : 12345 the script should mail the following as subject line: n:xyz c:12345 I know procmail is a good option for this, but I'm compelled to use shell script

View 3 Replies View Related

Ubuntu :: Superblock Could Not Be Read Or Does Not Describe A Correct Ext2 Filesystem

Jul 12, 2010

[URL]

This problem has arrived again.......I tried the same solution but didn't work out...the problem is described below.

I use Ubuntu 9.10 .

I did this in Ubuntu 9.10 live CD.

quote from terminal :-

ubuntu@ubuntu:~$ sudo mkdir /win
ubuntu@ubuntu:~$ sudo mount /dev/sda5 /win
ubuntu@ubuntu:~$ sudo mkdir /vdisk
ubuntu@ubuntu:~$ sudo mount -o loop /win/ubuntu/disks/root.disk /vdisk

[Code]....

The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock:

e2fsck -b 8193 <device>
ubuntu@ubuntu:~$ "
> ^C
ubuntu@ubuntu:~$
^^ quote ends.

View 4 Replies View Related

Networking :: Odd Internet Stopped Working - Symptoms Hard To Describe - Explained?

Jan 8, 2011

im not quite sure how to succintly say what is happening. the general idea is that my internet stopped working and I dont know why. I have a netbook that i am using while i am backpacking through asia. it has both ubuntu netbook ed, and winXP dual booting on it. out of the blue, i could not aquire an ip address through dhcp. This was true in both windows and linux, AND true while using either a wireless or wired connection. ok, that is odd, but not a big deal, i will just set the ip / subnet mask / gateway / dns manually. After doing this the computer reports properly connecting to the internet (did the same tests and got the same results in both nix and winxp), however I could not do anything on the internet. could not ping, nor do a dns lookup much less anything else.

scraching my head I looked around the internet for a solution and came across 'netsh int ip reset' this is a command I typed into the windows command line. I'm not sure what it does, but it worked so far as now

[Code]...

View 5 Replies View Related

Ubuntu Networking :: Replace Broad Wireless Card

Aug 22, 2010

I have been using Broadcam Wi-Fi cards for years and always have problems getting them to work well with Linux. Not too long ago ( 6 months) I replaced my broadcom card with an Intel Pro/Wireless 4965 card. Wi-fi is 1000% better now. Connects very well and well connect to systems that I could not ever see before. So I said get an Intel card and toss your Broadcom card away and start demanding that your next computer have an Intel card as these cards have native support in the Linux kernel.

View 3 Replies View Related

Ubuntu Networking :: Connect To Mobile Broad Band Using Terminal?

Oct 4, 2010

is there a command (set of) which i could use to connect my USB modem while in recovery mode?

what happened?

well, i tried installing Drivers for my ATI VGA and then uninstaled them (in order to install the edgers drivers). soon after the reboot i found out my key board n mouse is not recognized in GUI.

i found a little work around here

Quote:

That means that you do have keyboard in that mode & there are no seriously misconfigured packages. It's the 'netroot' menu selection & don't use 'sudo' in that mode as you are in a root shell. And while there, ensure that you have established a connection (ping [URL]), and then:

# ping ubuntu.com
[if this works, then proceed with the rest]
# apt-get update
# apt-get upgrade
# apt-get install -f

[Code]....

View 2 Replies View Related

Ubuntu :: Installing The Sify Broad Band Client On A Machine?

Mar 8, 2010

I have recently started using Ubuntu, i need help in installing the sify broad band client on my machine.

1) Where can i get the software for installing the client?

2) How do i install the client once i have installed the software?

View 2 Replies View Related

Ubuntu Networking :: Connecting A Modem Router With A Mobile Broad Band Umts Connection?

Feb 17, 2011

sometimes our ADSL connection gives up and we are left without internet connection for days until the problem gets fixed. I mean by this problem along the phone line. It affects all machines that connect to the internet through a Netgear WIFI Modem Router. I recently tried an alternative when this happens is to use a USB Huawei Mobile Broadband UMTS connection which works when you insert it in 1 laptop. Is there a way i could get the Netgear WIFI modem router to connect on that usb stick or PC that is online on that usb stick and give access to other machines that will want to connect to the web ?

View 4 Replies View Related

Networking :: Install Broad Band Wireless Modem (netgear)ADSL2 On Fedora Core 7

Jul 29, 2010

how to install broad band wireless modem (netgear)ADSL2 on Fedora core 7

View 2 Replies View Related

Server :: How To Igore Subject

Nov 30, 2010

I have this:

[Code]...

which runs a program. But I want to add some thing to it so that, if the subject contain a particular string, the program shouldn't be run. How do I do that?

View 1 Replies View Related

Server :: How To See The Subject Of Emails Queued

Jan 22, 2010

I've a mailserver based on postfix. I'm queueing all the emails that have to be sent. After that I'm managing the queue with the output of mailq.

But in this way I'm just able to have this details of the queued mails: sender, receiver, size, time. There is a way to see also the subject of that emails?

View 2 Replies View Related

Server :: Screening Subject In Sendmail Not Working?

Jun 21, 2011

I am trying to create a custom ruleset in sendmail, but not getting through, please guide me in right direction. I made following entry in sendmail.mc

LOCAL_CONFIG
Kspamsubject hash /etc/mail/spamsubject
HSubject: $>ScreenSubject

[code]....

View 5 Replies View Related

Fedora :: Subject - Modify Only Parameters In Kernel Config

Aug 28, 2009

I want to start to play with "homemade" kernels. (To get some experiences in this subject). I want to do this step-by-step. I have already read a lot about this. I have a Fedora 10 running. So I want to start with this. I have read that there is a "special" way to create a kernel for Fedora. [URL] OK. I understand this +/-. When you build a new kernel with an other version number, you have to rebuild all the modules with this new kernelversion, and you have to install these also.

But : I want to start with modify only some parameters in my kernel config. Do I need to rebuild and re-install the modules also? Will it not be enough to rebuild only the kernel? (vmlinuz) Where can I find some information about the options I can disable in my kernel to speedup my system? (boot process ed). I want to suppress the loading of unneeded modules. I want to understand the options in menuconfig (and there are a lot of options ! ! )

View 1 Replies View Related

Programming :: Return The Directories In Subject Dir, But Only The Directory Without Path?

May 21, 2010

Very new to this shell scripting/Linux scripting.

subject_dir=/labs/tricam/MERIT/MERIT_0*
for subject in `ls $subject_dir` ; do
if [ ! -d $subject_dir/$subject/feat/glm2010/doublegz/SRRTA.feat ] ; then

[code]....

View 1 Replies View Related

Server :: Sendmail - Everything Appears To Work But No Subject Is Logged

Aug 6, 2010

I am looking for the syntax for a sendmail ruleset to log the message subject to the syslog service. I have found a few posts on the web, but none seem to work. The basic appear to be - add the following to the sendmail.mc file then compile the sendmail.cf file using M4. The syntax suggested follows (I believe the rewrite rule is incorrect)(I and using <T> to indicate tabs):

LOCAL_CONFIC
Klog syslog
HSubject:<T>$>Check_Subject

LOCAL_RULESETS
SCheck_Subject
R$*<T>$:<T>$(log Subject=$1<T>$)<T>$1

sendmail.cf compiles and when used as the config file for sendmail - everything appears to work, but no subject is logged.

View 8 Replies View Related

Debian Multimedia :: GDBus Error - Authentication Agent Already Exists For Given Subject

Jan 19, 2013

I use gdm3+XFCE on my box (amd64, debian testing).

Recently, when I start my XFCE session, I have been getting this error message

GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: An authentication agent already exists for the given subject

Even starting a new XFCE session will not work. So far, it looks that this error message has no consequences, but it is annoying....

View 8 Replies View Related

Server :: Setup Postfix Header_check Subject That Discard All Emails That Have More Than 6 Words In It?

Sep 8, 2010

How would one setup a header_check that would discard all emails that have more than 6 words in it? Such as, if there are more than 6 spaces in the entire message it would be deleted? I cannot find this out but it would reduce my spam intake by 50+ a day.

View 2 Replies View Related

Networking :: Broad Networking - Video - VOIP And Backups

Jun 12, 2009

My home networking consists of a slackware box, running iptables with a dual NIC. That's the firewall. I have a Netgear FSM 7352S, which is a level 3 switch, which I am currently just using as a switch. Clients are numerous PCs and a couple of networked printers.

The "firewall" machine is also a file server.

Here are the issues I could use some pointers on:

I'd like to assure that the VOIP adapters get priority, assuring QOS, particularly voice quality.

I'd like to provide reasonable priority for video streaming, such as hulu and other sources, that the kids use.

I'd like bulk data transfers (like backing up partitions) to the file server that runs iptables, and acts as the firewall/gateway for a cable internet connection. It would be good to be able to do this without impacting VOIP and video streaming.

View 1 Replies View Related

General :: Create Cron Tab When DSL Line Down Set Automatically Restart The Network Service While DSL Line Up?

Oct 7, 2010

How to create cron tab when DSL line down set automatically restart the network service while DSL line up?

View 3 Replies View Related

General :: Getting The Line Of String From Previous Pipe Output By Line Number?

Feb 8, 2010

After running the following command, I get:

[root@yukiko /]# find / -iname .bashrc
/home/clamav/.bashrc
/home/vpopmail/.bashrc
/etc/skel/.bashrc
/root/.bashrc

But I would like to have a command that prints a specific line by supplying the command with the line number, for example:

[root@yukiko /]# find / -iname .bashrc | getline(2)
/home/vpopmail/.bashrc

Is there such a command on CentOS?

View 3 Replies View Related

General :: Script To Count # Of Chars Per Line - If Line Meets Certain Criteria - And Get Avg #?

Sep 11, 2009

I have several files with many lines something like this:

I'm trying to write a script that will count the number of characters per line that doesn't contain a ">" symbol and give me an average of those values. I have most of the script together but I can't figure out how to connect some of the steps.

Code:

View 3 Replies View Related

General :: Scripting - Feed An Input File Into An If Statement Line-by-line

Dec 23, 2009

I am trying to write a script that takes an input file ($FileName) and an intermediate file ($FileName.info) and removes lines from $FileName if the value in $2 of $FileName.info is <75.

I can't figure out how to feed only one line of the .info file to the if statement at a time so that it will perceive it as an integer instead of a list.

The error I am getting now is ./script.sh: line 6: [: : integer expression expected

Sample input $FileName

Code:

Code:

Code:

Script so far:

Code:

View 10 Replies View Related

General :: Parse A File And Print Each Line That Ends With Matching Pattern (if The Next Line Is Blank)

Aug 2, 2010

I've written a script to parse a file and print each line that ends with matching pattern, if the next line is blank. The pattern lines are the result of md5sum $i|sed 's/path///g' so that only md5 and filename appear. Here's what I'm using.

Quote:
for fline in `sed -n '/.*.ext$/p' file1`
do
if [ "`sed -n -e '/'"$fline"'/ {n; p;}' file1`" == "" ]
then
echo ""$fline" has no info" >>file2
fi
done
[Code]....

View 4 Replies View Related

General :: Command Line Way To View A Line Of A File With Context?

Feb 24, 2011

I'd like show a certain line or lines of a file with context, kind of like a unified diff, on the command line in Linux:

$ (something) -l 154 stuff.py
150: def foo(bar):
151: """

[code]....

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved