Basically I have a USB flash drive currently formatted under vfat. I can log in as root and the system automatically picks it up and automounts the drive successfully. What needs to happen is that a non-root user needs to be able write to this device while root has mounted this device. Due to other program constraints, I can not mount the device using another user so I have to do it with root.
View 9 Replies
I have installed the Apache Directory Server (ApacheDS) Now I need a iniscript that startining the App as Root, so that it can use the Port 389. After them a unprivileged User (apachds) should run the Service. The same solution I am searching for Glassfish. What can I use for them? RHEL and compatibles doesn't have a start-stop-daemon like Debian.
View 3 Replies View RelatedI just noticed on my Ubuntu machine (ext3 filesystem) that removing write permissions from a file does not keep root from writing to it. Is this a general rule of UNIX file permissions? Or specific to Ubuntu? Or a misconfiguration on my machine? Writing to the file fails (as expected) if I do this from my normal user account.Is this normal behavior?Is there a way to prevent root from accidentally writing to a file (Preferably using normal filesystem mechanisms, not AppArmor, etc.)
I understand that root has total control over the system and can, eg, change the permissions on any file.My question is whether currently set permissions are enforced on code running as root. The idea is the root user preventing her/himself from accidentally writing to a file. also understand that one should not be logged in as root for normal operations.
i used opensuse 11.1 ...there is option for root user to create password for root...but for ubuntu i did not find anything like that...so how can i create root password....or how can i use root
View 1 Replies View Relatedi just installed linux mandriva 2009. i set password for root and created a user account. when i try to login as root, after logging out as user, it does not allow me and gives the error "root logins are not allowed". even it does not show the root account. if i try to go to root from konsole terminal using su root, it allows to enter as a root but when i try to start the GUI with startx it gives error.not sure what to do and why i can't see my account in GUI mode
View 5 Replies View RelatedI am using mint 8 for a 2 weeks, I am noob to linux but I like Mint than any other linux distro which is great alternative to windows. I have a problem regarding password reseting.
1. My laptop automatically get logged in without asking user name and password.
2. I tried to change password for newly created user and root user using graphical way but it does not work.
2. I can perform administrator task using only OEM user which is default inbuilt user of mint.
How can make my laptop to ask password when mint get booted? How to change password for other users?
Is It possible to change a process running in root-user to non-root-user by setting suid / uid / euid / gid etc... I so please instruct how, when and wat to set in order to change a process running in root-user to non-root user
View 4 Replies View RelatedI installed arch on to my dell (8250) p4 and everything went great until my log in window came up I tried logging and it would not except my user name or password. I was able to get in on root and made sure the user name password was valid and it was! No matter what name / password I add with full access it will only see root
View 3 Replies View RelatedI tried to make my account root by editing etc/group:
root:x:0:oneat
daemon:x:1:
bin:x:2:
sys:x:3:
adm:x:4:oneat
...
But it didn't succeed.What can I do more?
So, i've a little question. I have a Linux Red Hat 5.1 System wich has a programm that needs to be started as a user -> usera .When i reboot the server, how can i make it possible to run a command in the shell as usera user?Someone told me, that this is not possible to make an autostart entry because this works only with the root account?!What i want its simple.- Command -> startprg need's to be started as user usera automatically after an automated reboot of the red hat linux
View 4 Replies View RelatedIm trying to run this program and they say I should not run it as root but as a diff user. how to change from root to dif.user. I am using linux CentOS 5.5. Is it a terminal command? How do i create a diff user and log in as it?
View 5 Replies View RelatedIm doing a security based project in linux platform(ubuntu). When i try to modify some properties in ubuntu it is showing as "permission denied". I have only one password which i created when installing ubuntu.But using tat password i cant login as root. How to make login as a root user?
View 7 Replies View RelatedI'm using Debian Squeeze, and I need to give to my gui user (the gnome user I think its called) root permission, I mean, I want to explore, read and write anything I want using my GUI user, how can I do it?
View 14 Replies View Relatedwhen i type in su in the terminal it asks me for a pwd. I type in my user pwd and it denies me. So how do I set myself up as a root user?
View 6 Replies View RelatedWhenever I create, move or copy into the httpdocs (host envio based on plesk installation)My FTP user privileges go wacky. For instance I could not delete, rename or upload anything to the directory I created as root in ssh.
View 1 Replies View Relatedi want to install a software in my linux machine staying in another user that i have created .It is asking for root access for some command to be execute during installation process.when I am trying to execute "sudo -s" its showing " is not in the sudoers file. This incident will be reported.".what next will i do.I am in my ubuntu machine.
View 3 Replies View RelatedFor a user on a Linux host, I need to make everything inaccessible besides his home directory. I have heard that this is usually done by changing the root directory for the user (and setting it to the user's home directory), however I couldn't find the way to do it.
I thought about the chroot command, but it seems it just runs the specified command, considering the specified directory as the root directory. So it seems chroot is not what i need. So my question is: what is the command which changes the user's root directory?
I am using Ubuntu 10.04.1 LTS x64. I would like to backup my /var/lib/mysql directory as a non-root user.
I have been backing this up using cron as the root user, but another admin in my company insists that we create a separate user to perform this task for security reasons. I have created a user, created a group, added the user to the group, but still cannot access /var/lib/mysql/mysql directory as that user. I would like that user to have +rx access only.
Can a sudo user do everything what a root user can do? I read sometimes expert say "You should run it as root rather than sudo user".
View 14 Replies View RelatedI want to create a user who has all the privileges that root user has.I know how to create a user but i don't know how to grant root privileges to him.
View 10 Replies View RelatedI have done these steps. still its not working.
1. Log in as the root user.
2. I have created a file with name "reminder" in /root directory.
3. Create a /etc/cron.daily directory. Add a file called "taxrem", which reads a text file from home directory, so write a command in the "taxrem" : "cat ~/reminder"
4. Add command to /etc/crontab file. Based on the conditions I want, such as : 5 13 * * * root run-parts /etc/cron.daily
There is no entry in the cron.deny file. Still I have not get any response on that scheduled time.
How give all access (same as root) to other user because i need to run some application s/w from other user login.
View 2 Replies View RelatedHow to add user with root privileges and SSH access.
View 6 Replies View RelatedI have created a linux machine and installed some softwares on it with root user privileges . I used to login with root user credentials for doing the various task.
Later i have realise that this is not the best practice to follow and there should be a new user with less privileges to be created for doing the day to day task.
I have read the steps to create the user but will that new user sufficient enough to do the task that i m doing it through root user?
Will my software allow the new user to work on them?
I would be glad if someone points me to a guidelines on what should be my next step?
I create a user in CentOS 5.5 for using with my email account.
useradd ralf
passwd ralf
use "ralf user" only for my email account. How can I remove others privileges/permissions? Also, I want to use "ralf user" without root privileges/permissions.
I want to disallow root login on my RHEL Machine?
View 14 Replies View RelatedI know that we normaly use the command sudo su to change to root.. but, If I want to promotes an user to have the same powers of the root is it possible?
View 5 Replies View RelatedI have been trying to establish a connection between two pcs via the ssh channel. I successfully made the connection as a root user, but when i tried as a non root user i had to type in the password the make contact with the other pc. how exactly does this passwordless login actually work?
View 3 Replies View RelatedIs there way we can restrict root to su to normal user. Or at least a way to prompt for the password when root tries to su <username>.
View 3 Replies View RelatedI am trying to setup samba. when I run testparm as a user it says all is well. But when I run it as root (sudo testparm) I get the error rlimit_max: rlimit_max (1024) below minimum Windows limit (16384)
I entered the following line in "/etc/security/limits.conf":
* - nofile 16384
